GOST 22245-90

ГОСТ 22245-90

Viscous petroleum road bitumens. Specification.

Битумы нефтяные дорожные вязкие Технические условия

Status: Effective - Supersedes. The limitation of the effectiveness period has been lifted: Protocol No. 4-93 of the IGU dated 10.21.93 (IUS 4-1994)

The standard applies to viscous road oil bitumens, intended as a binder in the construction and repair of road and airfield pavements.

Стандарт распространяется на вязкие дорожные нефтяные битумы, предназначенные в качестве вяжущего материала при строительстве и ремонте дорожных и аэродромных покрытий.

Choose Language: 
Format: Electronic (pdf/doc)
Page Count: 12

Approved: USSR State Committee for Standards, 2/12/1990

SKU: RUSS15935

Price: $77.22




The Product is Contained in the Following Classifiers:

Construction (Max) » Standards » Other state standards used in construction » 75 Extraction and processing of oil, gas and related production »

PromExpert » SECTION I. TECHNICAL REGULATION » V Testing and control » 4 Testing and control of products » 4.9 Testing and control of chemical and industrial products » 4.9.9 Petroleum products of industrial and domestic consumption, lubricating oils and greases, plastic »

ISO classifier » 75 EXTRACTION AND PROCESSING OF OIL, GAS AND RELATED PRODUCTION » 75.140 Paraffins, bituminous materials and other petroleum products »

National standards » 75 EXTRACTION AND PROCESSING OF OIL, GAS AND RELATED PRODUCTION » 75.140 Paraffins, bituminous materials and other petroleum products »

National Standards for KGS (State Standards Classification) » Latest edition » B Oil products » B4 Petroleum products for industrial and domestic consumption » B43 Oil bitumens »

National Standards for OKSTU » OIL, PETROLEUM PRODUCTS, GAS » Petroleum and shale bitumens »


As a Replacement Of:

GOST 22245-76: Viscous petroleum road bitumens. Specification

The Document References:

GOST 11501-78: Petroleum bitumen. Method for determination of depth of penetrometer needle penetration

GOST 11505-75: Petroleum bitumen. Method for determination of ductility

GOST 11506-73: Petroleum bitumen. The method of the determination of softening point by ring and ball

GOST 11507-78: Petroleum bitumen. Method for determination of brittle point

GOST 11508-74: Petroleum bitumens. Methods for determination of bitumen adhesion to marble and sand

GOST 12.1.005-88: General sanitary requirements for working zone air

GOST 12.1.007-76: Noxious substances. Classification and general safety requirements

GOST 12.1.014-84: Working zone air

GOST 12.1.044-89: Fire and explosion hazard of substances and materials. Nomenclature of indices and methods of their determination

GOST 1510-84: Petroleum and petroleum products. Marking, packing, transportation and storage

GOST 18180-72: Petroleum bitumen. Method for determination of change of mass after hitting

GOST 19433-88: Dangerous goods. Classification and marking

GOST 22245-76: Viscous petroleum road bitumens. Specification

GOST 2517-85: Crude oil and petroleum products. Methods of sampling

GOST 4333-87: Petroleum products. Methods for determination of flash and ignition points in open crucible

The Document is Referenced By:

DND MO-004/2004: Recommendations for the selection of asphalt concretes on bituminous rubber composite binder for the upper layers of coatings and wear layers

GOST 10140-2003: Thermal insulating mineral wool slabs on bituminous binder. Specifications

GOST 10140-80: Thermal insulating mineral wool slabs on bituminous binder. Specifications

GOST 10296-79: Isol-hydroinsulating material. Specifications

GOST 10396-84: Crepe cable paper

GOST 11955-82: Road petroleum liquid bitumen. Specifications

GOST 16136-2003: Thermal insulating Perlite bitumen slabs. Specifications

GOST 16136-80: Thermal insulating Perlite bitumen slabs. Specifications

GOST 17065-94: Wound cardboard drums

GOST 20022.6-93: Wood protection. The ways of impregnation

GOST 20429-84: Folgoisol. Specifications

GOST 25458-82: Wooden (timber) posts for road signs. Specifications

GOST 2889-80: Bitumen hot mastic for roofing. Technical requirements

GOST 30491-2012: Organomineral mixtures and soils stabilized by organic binders for road and airfield construction. Specifications

GOST 30491-97: Organic mineral mixtures and soils stabilized by organic dinders for road and airfield construction Specifications

GOST 31015-2002: Bituminous stone mastic mixtures and stone mastic asphalt. Specifications

GOST 32707-2014: Automobile roads of general use. Mineral powder. Method for determination of swelling samples from a mixture of powder with bitumen

GOST 32870-2014: Automobile roads of general use. Bituminous mastics. Technical requirements

GOST 32872-2014: Automobile roads of general use. Bituminous sealants. Technical requirements

GOST 32948-2014: Automobile roads of general use. Supports of road signs. Technical requirements

GOST 4640-93: Mineral wool. Specifications

GOST 515-77: Bitumized and tarred packaging paper

GOST 6617-76: Petroleum construction bitumen

GOST 7006-72: Protective coverings of cables. Design and types, technical requirements and test methods

GOST 7415-86: Bituminous asbestos paper. Specifications

GOST 8828-89: Base paper and two-layer waterproof packaging paper

GOST 9128-2009: Asphaltic concrete mixtures for roads and aerodromes and asphaltic concrete. Specifications

GOST 9128-2013: Asphaltic concrete and polymer asphaltic concrete mixtures, asphaltic concrete and polymer asphaltic concrete for roads and aerodromes. Specifications

GOST 9128-97: Asphaltic concrete Mixtures for roads and aerodromes and asphaltic concrete. Specifications

GOST R 52128-2003: Bitumen road emulsions. Specifications

GOST R 52129-2003: Mineral powders for asphaltic concrete and organomineral mixtures. Specifications

GOST R 52751-2007: Steel-fibro-concrete slabs for bridge spans. Specifications

GOST R 54401-2011: Automobile roads of general use. Hot road mastic asphalt. Technical requirements

GOST R 55397-2013: Reinforced bitumen sheets for waterproofing of bridge decks. Preparation of test samples

GOST R 55420-2013: General use highways. Cationic road bitumen emulsions. Specifications

KTP 5.01.2002: Installation of bitumen-soil coatings by the method of mixing on the road with road mounted cutters

Manual: Manual for impulse and low consumption fire extinguishing systems

Manual for SNiP 3.06.03-85: Manual for the preparation and use of bitumen road emulsions

Manual for SNiP 3.06.03-85: Manual for the construction of asphalt concrete pavements and foundations of roads and airfields

Manual for SNiP 3.06.03-85: Manual for surface treatment on roads

Manual for SNiP 3.06.03-85: Manual on the construction of coatings and foundations of roads and airfields from soils reinforced with cementing materials to SNiP 3.06.03-85 and SNiP 3.06.06-88

ODM 218.2.001-2009: Recommendations for the design and construction of culverts of metal corrugated structures on public roads, taking into account regional conditions (road-climatic zones)

ODM 218.2.002-2007: Method for determining the elasticity of asphalt-binder in polymers-concrete mixtures (for experimental use)

ODM 218.2.002-2009: Guidelines for the use of modern materials in the mating pavement with the expansion joints of bridge structures

ODM 218.2.003-2007: Recommendations for the use of polymer-bitumen binders based on SBS-type block copolymers in the construction and reconstruction of roads

ODM 218.2.004-2006: Recommendations for the determination of resistance to aging and viscosity of bitumen

ODM 218.2.017-2011: Guidelines Design, construction and operation of roads with low traffic

ODM 218.2.025-2012: Expansion joints of automobile bridges

ODM 218.2.031-2013: Guidelines for the use of fly ash and ash-and-slag mixtures from coal combustion at thermal power plants in road construction

ODM 218.2.034-2013: Guidelines for the preparation and use of asphalt mix using recycled asphalt

ODM 218.2.042-2014: Guidelines. Warm asphalt mixes. Recommendations for use

ODM 218.2.078-2016: Guidelines for the selection of the structure for strengthening the slopes of the road bed of public roads

ODM 218.2.079-2016: Recommendations about design macrorough pavings

ODM 218.3.001-2006: Guidelines for the application of polymer-dispersed reinforcement of asphalt concrete using rubber thermoplastic elastomer (RTEP)

ODM 218.3.001-2007: Methodical recommendations on the technology of using the cadem-type surfactant additive Cadem-VT in the construction of asphalt concrete pavements

ODM 218.3.004-2010: Guidelines for the thermal profiling of asphalt concrete pavements

ODM 218.3.007-2011: Rationing of the properties of organic binders depending on climatic conditions and operating conditions of coatings

ODM 218.3.013-2011: Guidelines for the use of bitumen emulsions when arranging protective layers of wear from cast emulsion-mineral mixtures

ODM 218.3.020-2012: Guidelines for ensuring the stability of bitumen against aging in technological processes of manufacturing and using asphalt concrete mixtures

ODM 218.3.022-2012: Guidelines for determining the physicomechanical properties of hot mix asphalt concrete, harmonized with European standards

ODM 218.3.026-2012: Recommendations for the use of high-density asphalt concrete based on polymer-bitumen binders for road pavements in different climatic conditions of the Russian Federation

ODM 218.3.054-2015: Device of a surface treatment and thin layers of wear with application of different types of fibers

ODM 218.3.055-2015: Guidelines for the preparation of asphalt samples with roller (plate) compactor

ODM 218.3.058-2015: Guidelines for the use of synthetic fiber for dispersed reinforcement of hot asphalt concrete

ODM 218.3.060-2015: Guidelines for the repair of pavements consisting of cement concrete pavements, covered with asphalt concrete pavements, on public roads

ODM 218.3.063-2016: Recommendations on the selection of bitumen binders based on the determination of their rheological properties to increase the resistance to the formation of asphalt concrete

ODM 218.3.073-2016: Recommendations for the use of impregnating compositions to improve the durability of asphalt concrete pavements

ODM 218.3.087-2017: Recommendations for the use of asphalt mixes based on metallurgical slag materials for the conditions of the Central Federal District

ODM 218.3.096-2017: Guidelines for the volumetric design of asphalt mixtures according to the Marshall Methodology

ODM 218.3.102-2017: Guidelines for the construction of asphalt pavement under adverse weather conditions

ODM 218.4.038-2017: Guidelines for the acceptance of coatings from dense asphalt concrete mixtures, designed by the volumetric method

ODM 218.5.001-2009: Guidelines for the use of geogrids and flat geogrids for the reinforcement of asphalt concrete layers of improved types of coatings for the overhaul and repair of roads

ODM 218.5.008-2008: Methodical recommendations on the use of a crack-interrupting layer when constructing road pavements with a polymer-asphalt-concrete coating (for experimental implementation)

ODM 218.9.079-2016: Recommendations about design macrorough pavings

OST 218.010-98: Cementing polymer-bitumen road coating on the basis of block copolymers such as SBS. Specifications

OST 35-15-82: Technological processes. Waterproofing of concrete roof panels with mastic compounds in the factory.

PKO-2010.6: Reference materials for the design work of the electrical part of the project

RD 153-34.2-21.624-2003: Standard instructions for restoring and repairing seals for expansion joints of hydraulic structures

RD 31.35.01-80: Guidelines for corrosion protection of marine port facilities designed for handling chemicals. Minmorflot, Soyuzmorniiproekt, 1980

Recommendations: Aspiration smoke-sensitive alarms VESDA. Part 1. Scope

SNiP 32-03-96: Aerodromes

SP 121.13330.2012: Aerodromes

SP 243.1326000.2015: Design and construction of low-volume roads

SP 312.1325800.2017: Internal roads of rural settlements. Service regulation

SP 321.1325800.2017: Residential and public buildings. Regulations for designing of protection against radon

SP 37.13330.2012: Industrial transport

SP 431.1325800.2019: Industrial automobile roads. Rules for design and construction in the Arctic zone

SP 78.13330.2012: Automobile roads

SP 99.13330.2016: On-farm roads in the collective and state farms and other agricultural enterprises and organizations

ST RK 1210-2003: Bitumens and bituminous binders. Method for determination kinematic viscosity

ST RK 1227-2003: Bitumens and bituminous binders. Determination of a softening point by the ball-and-ring method

STO 218.5.001-2005: Production of mixtures and the device of a rough thin layer coating (STP)

TR 103-00: Guide to Good Practice for Constriction of Roads Using Asphalt Concrete

TR 103-07: Technical recommendations for the construction of road structures using asphalt concrete

TR 135-02: Technical recommendations on the construction and technology of road construction in areas exposed to increased traffic loads

TR 171-06: Technical recommendations on the composition and technology of pavement repair using cold bitumen-mineral mixtures (cold asphalt)

TR 197-08: Technical recommendations on the use of asphalt concrete mixtures modified with old asphalt concrete additives

TSN 23-337-2002: Thermal insulation of equipment and pipelines. Sverdlovsk region

TU 5718.030.01393697-99: Mixes asphalt concrete crushed stone and mastic and asphalt concrete. Technical specifications

TU 5718-001-00011168-2000: Gravel-Mastic Asphalt Concrete Mixes and Asphalt Concrete

TU 5718-001-53737504-03: Blend of sulfur asphalt concrete cast and cast asphalt concrete

TU 5718-001-58528024-04: BITREK Technical Specifications. Bitumen Resin Environmentally Friendly Composite Materials

TU 5718-002-04000633-2006: Cast asphalt mix and cast asphalt mixes

TU 5718-002-53737504-01: Poured Gray Asphalt Concrete Mixes and Poured Gray Asphalt Concrete

TU 5718-003-04000633-2006: Asphalt (hot) and asphalt mixes for monolithic road structures

TU 5762-001-05297677-99: Thermal Insulating Material "TIMPLAK". Technical Specifications

TU 5767-001-04002154-92: Pipes with Perlite-Bitumen Insulation and Perlite-Bitumen Semi-Cylinders

VSN 104-93: Design and Installation Standards for Waterproofing for Subway Tunnels Constructed Using Opencast Method

VSN 123-77: Instruction for installation of paving and roadbeds made from crushed stone, gravel and sand materials impregnated with organic binders

VSN 14-95: Guidelines for the Construction of Asphalt Concrete Road Pavements

VSN 176-78: Guidelines for the Design and Installation of Corrugated Metal Pipe Culverts

VSN 27-76: Technical Instructions for the Use of Bitumen Sludges for Arrangement of Protective Layers on Roads

VSN 38-90: Technical Guidelines for the Construction of High-Friction Road Pavements

VSP 02.01.32/Russian Defense Ministry: Rules for the production and acceptance of work in the construction of aerodromes of the Armed Forces of the Russian Federation

Customers Who Viewed This Item Also Viewed:

Steel structures
Language: English
Price: $297.00
Concrete with polysterene aggregates. Specifications
Language: English
Price: $308.76
Steel welded vessels and apparatus. General technical conditions
Language: English
Price: $108.90
Guidance on the selection of precautionary statements for the labelling in accordance with GOST 31340-2013
Language: English
Price: $301.95
Billet of rotor shafts and rings of turbine generators
Language: English
Price: $1,487.33
Vessels and apparatus. Norms and methods of strength calculation. Calculation of cylindrical and conical shells, convex and flat bottoms and covers
Language: English
Price: $287.10
Seismic building design code
Language: English
Price: $594.00
Aviation fuel for gas turbine engines JET A-1 (Jet A-1). Specifications
Language: English
Price: $150.66
On the approval of federal norms and rules in the field of industrial safety "General explosion safety rules for explosive and fire hazardous chemical, petrochemical and oil refining industries"
Language: English
Price: $819.95
Noxious substances. Classification and general safety requirements
Language: English
Price: $32.67
Safety valves of stream and hot-water boilers. Technical requirements
Language: English
Price: $57.42
Steam and hot-water boilers
Language: English
Price: $47.52
System of ensuring of geometrical parameters accuracy in construction. Manufacturing and assembling tolerances
Language: English
Price: $233.64
Manufacturing and quality control of steel structures for construction
Language: English
Price: $183.15
Machines, instruments and other industrial products. Modifications for different climatic regions. Categories, operating, storage and transportation conditions as to environment climatic aspects influence
Language: English
Price: $173.25
Rules of Electrical Installations Design (Russian Electrical Code). 7th Edition. All sections and exhibits
Language: English
Price: $478.76
Steel structures
Language: English
Price: $594.00
Buildings and structures foundations
Language: English
Price: $495.00
Pile foundations
Language: English
Price: $519.75
Basic norms of interchangeability. General tolerances. Limit deviations for linear and angular dimensions without tolerance indications
Language: English
Price: $37.62

YOUR ORDERING MADE EASY!

RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.

Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.

We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.

Placing Your Order

Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).

Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.

For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.

For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.

Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.

Your Order Best Quality and Authenticity Guarantee

Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).

We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.

We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.

All Codes and Regulations

All Categories

Send us a message Expand Collapse

Leave your message in the form below, and we will write back by e-mail!