GOST 17380-83
ГОСТ 17380-83
|
|
Seamless welded steel pipeline components for Pn £ 10 MPa (£ 100 kgf/cm2). Specifications
Детали трубопроводов стальные бесшовные приварные на Ру £ 10 МПа (£ 100 кгс/см2) Технические условия
Status: Not effective - Superseded. IUS 9-2002
The standard applies to seamless steel welded parts of pipelines designed to connect the pipes of technological pipelines, including pipelines to which the “USSR Gosgortekhnadzor Rules” apply, to the conditional pressure Py> = 10 MPa (.
Стандарт распространяется на стальные бесшовные приварные детали трубопроводов, предназначенные для соединения труб технологических трубопроводов, включая трубопроводы, на которые распространяются «Правила Госгортехнадзора СССР», на условное давление Ру >= 10 МПа (.
Choose Language:
Format: Electronic (pdf/doc)
Approved: USSR State Committee for Standards,
12/19/1983
SKU: RUSS15957
The Product is Contained in the Following Classifiers:
Construction (Max) »
Standards »
Other state standards used in construction »
23 Hydraulic and pneumatic systems and components for general use. »
PromExpert »
SECTION I. TECHNICAL REGULATION »
V Testing and control »
4 Testing and control of products »
4.12 Testing and control of products of metallurgical industry »
4.12.6 Metal products »
ISO classifier »
23 HYDRAULIC AND PNEUMATIC SYSTEMS AND GENERAL PURPOSE COMPONENTS »
23.040 Pipelines and their components »
23.040.40 Metal fittings »
National standards »
23 HYDRAULIC AND PNEUMATIC SYSTEMS AND GENERAL PURPOSE COMPONENTS »
23.040 Pipelines and their components »
23.040.40 Metal fittings »
National Standards for KGS (State Standards Classification) »
Latest edition »
G Machines, equipment and tools »
G1 General parts and units of machines »
G18 Fittings and pipeline connections »
National Standards for OKSTU »
OTHER AND NON-CONDITIONED METAL PRODUCTS »
Steel connecting parts for pipelines »
The Document is Replaced With:
GOST 17380-2001: Carbon and low-alloy steel butt-welding fittings. General specifications
As a Replacement Of:
GOST 17380-77: The parts of seamless welded pipelines from carbon steel to Pd less than or equal to 10 MPa (less than or equal to 100 kgf / cm2). Specification
The Document References:
GOST 1050-74: High-grade constructional carbon steel
GOST 1050-88: Carbon structural quality steel gauged bars with special surface finish. General specifications
GOST 11701-84: Metals. Methods of tensile testing of thin sheets and strips
GOST 1497-84: Metals. Methods of tension test
GOST 1577-81: Rolled sheets and wide strips of structural quality steel. Specifications
GOST 16037-80: Welded joints in steel pipelines. Main types, design elements and dimensions
GOST 16523-70: Rolled sheets from carbon quality and ordinary steel for general purposes. Specification
GOST 16523-89: Rolled sheets from carbon quality and ordinary steel for general purposes
GOST 17066-80: Low-alloyed structural steel sheets and strips in coils. Marks and technical requirements
GOST 17375-83: Seamless welded steel pipeline components for Pn £ 10 MPa (£ 100 kgf/cm2). Sharply curved offsets. Design
GOST 17376-83: Seamless welded steel pipeline components for Pn £ 10 MPa (£ 100 kgf/cm2). Tees. Design and dimensions
GOST 17378-83: Seamless welded steel pipeline components for Pn £ 10 MPa (£ 100 kgf/cm2). Reducers. Design and dimensions
GOST 17379-83: Seamless welded steel pipeline components for Pn £ 10 MPa (£ 100 kgf/cm2). Elliptical pipe seals. Design and dimensions
GOST 17380-77: The parts of seamless welded pipelines from carbon steel to Pd less than or equal to 10 MPa (less than or equal to 100 kgf / cm2). Specification
GOST 19282-73: Low-alloyed plate strip universal steel. Specifications
GOST 24642-81: Basic norms of interchangeability. Tolerances of form and position. Basic terms and definitions
GOST 3282-74: General-purpose low-carbon steel wire. Specifications
GOST 356-80: Valves and details for piping. Pressures conditional, test and operational. Lines.
GOST 4543-71: Structural alloyed steel
GOST 550-75: Seamless steel tubes for petroleum processing and petrochemical industry. Specifications
GOST 5520-79: Carbon, low-alloy and alloy sheet steel for boilers and pressure vessels. Specifications
GOST 8731-87: Seamless hot-rolled steel tubes. Specifications
GOST 8732-78: Seamless hot-deformed steel pipes. Range of sizes
GOST 8733-74: Cold-formed and heat-formed seamless steel pipes. Technical requirements
GOST 8734-75: Seamless steel tubes cold deformed. Range
GOST 9454-78: Metals. Method for testing the impact strength at the low, room and high temperature
PUG 69: Regulations for the Design and Safe Operation of Pipelines for Combustible, Toxic and Liquefied Gases
The Document is Referenced By:
GOST 17374-83: Seamless welded steel pipeline components for Pn £ 10 MPa (£ 100 kgf/cm2). Types and main parameters
GOST 17375-2001: Carbon and low-alloy steel butt-welding fittings. Sharply curved bends type 3D (R=1,5 DN). Design
GOST 17375-83: Seamless welded steel pipeline components for Pn £ 10 MPa (£ 100 kgf/cm2). Sharply curved offsets. Design
GOST 17376-83: Seamless welded steel pipeline components for Pn £ 10 MPa (£ 100 kgf/cm2). Tees. Design and dimensions
GOST 17378-83: Seamless welded steel pipeline components for Pn £ 10 MPa (£ 100 kgf/cm2). Reducers. Design and dimensions
GOST 17379-83: Seamless welded steel pipeline components for Pn £ 10 MPa (£ 100 kgf/cm2). Elliptical pipe seals. Design and dimensions
GOST 17380-2001: Carbon and low-alloy steel butt-welding fittings. General specifications
GOST 30732-2001: Steel shaped pipes and products with foamed polyurethane thermal insulation in polyethylene jacket. Technical specifications
GOST R 51763-2001: Well sucker rod pump drives. General technical requirements
GOST R 58095.0-2018: Gas distribution systems. Requirements for gas consumption networks. Part 0. General
Manual for VNTP 1-86: Guidelines for the design of pipelines laid in underground workings
Manual to SN 527-80: Manual to SN 527-80. On the strength design of the technological steel pipelines at Py up to 10 Mpa
OST 102-45-85: Parts of pipelines seamless welded at PN up to 10.0 MPa (100 kgf / cm2). General specification
OST 108.030.133-84: Pipe elements of steam boiler heat surfaces under pressure less than 4 MPA, water boilers and heat-recovery boilers. Technical requirements, acceptance and control methods.
OST 24.070.01-86: Products of mining machinery. General technical requirements.
OST 24.200.02-91: Assembling units of steel pipelines on nominal pressure<=10 MPa (100 kgf/cm2) of complete technological lines. General specifications.
OST 26-02-376-78: Technological units of gas and oil industry. General technical requirements.
OST 26-18-5-88: Technological units of gas and oil industry. General technical requirements.
OST 26-291-94: Steel welded vessels and devices. General technical requirements.
PB 03-108-96: Process pipeline design and safe operation rules
RD 153-006-02: Guidelines for the Welding Process in Construction and Renovation of Trunk Petroleum Pipelines
RD 26.260.010-97: List of Regulatory Documents on Standardization for Pressure Vessels and Apparatus
RD 34.30.106-95: Guidelines for the design of gas supply system with the addition of natural gas up to 0.5 MPa for gas turbine and combined cycle thermal power plants of RAO "UES of Russia", 08/24/95
RD 38.13.004-86: Operation and repairs of process pipelines operating under pressure up to 10.0 MPa (100 kgf/cm2)
RD 39-132-94: Regulations for Operation, Inspection, Repair and Rejection of the Field Pipelines 1994
RD RTM 38.14.006-86: Method for determining the service life of the coils of catalytic reforming furnaces that have worked out the project resource
RTM 24-85: Information index of state, republican and industry standards, technical specifications for materials and products used in the design of furnaces and dryers
SNiP 2.04.12-86: Steel pipelines strength analysis
TU 1390-012-86695843-2011: Steel pipes and fittings 57–2020 mm in diameter with internal single-layer coating based on liquid solvent-free epoxy materials
TU 1462-203-0147016-01: Welding steel connection parts for operation in oil-field environments with increased corrosion activity. Technical conditions
TU 36-1686-82: Bends are steeply curved with an angle of 90 degrees from steel grades 15X5M, 08X18NIOT, 12X18NIOT and 10X17H13M2T seamless welded on the Rou is less than 10 MPa
VNTP 11-93: Engineering Design Standards for Facilities for the Production of Barley Brewer's Malt
VNTP 26-94: Standards for technological design of sparkling wine factories (production of Soviet champagne using a continuous tank method)
VNTP 34-93: Engineering Design Standards for Alcohol Industry Facilities
VSN 10-83/Minhimprom: Instruction on designing of oxygen gas pipelines
VSN 185-85: Strength calculation of manifold pipelines
Zh3-139: Recommendations for the design of pipelines for water treatment plants. Assortments of pipeline parts. Construction and laying of pipelines
|
Customers Who Viewed This Item Also Viewed:
 |
Preservative oil K-17
Language: English |
Jet fuels
Language: English |
Chill moulds. Ventilation channels. Dimensions
Language: English |
Additive АКОР-1. Specifications
Language: English |
Laminated glued wood. Methods for determination of ultimate and modulus of elasticity in static bending
Language: English |
Ceramic brick and stone. General specifications
Language: English |
Microbiology of food and animal feeding stuffs. Methods for detection and enumeration of sulphite-reducing bacteria growing under anaerobic conditions
Language: English |
Maximum admissible amounts of chemical substances, emitting from the packaging materials into food products
Language: English |
System of design documents for construction. Rules for execution of the working documentation of architectural and construction solutions
Language: English |
 |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.