GOST 8736-93
ГОСТ 8736-93
|
|
Sand for construction works. Specifications
Песок для строительных работ. Технические условия
Status: Not effective - Superseded. Registration information 1641-st dated 11/18/2014 (Rosstandart official website); (IUS 5-2015)
The standard applies to natural sand of rocks with a true density of grains from 2.0 to 2.8 g
Стандарт распространяется на природный песок горных пород с истинной плотностью зерен от 2,0 до 2,8 г/см3, предназначенные для применения в качестве заполнителя тяжелых, легких, мелкозернистых, ячеистых и силикатных бетонов, строительных растворов, приготовления сухих смесей, для устройства оснований и покрытий автомобильных дорог и аэродромов. Требования стандарта не распространяются на фракционированные и дробленые пески
Choose Language:
Format: Electronic (pdf/doc)
Approved: Ministry of Construction of Russia,
11/28/1994
SKU: RUSS15958
The Product is Contained in the Following Classifiers:
Construction (Max) »
Regulations »
Documents System of normative documents in construction »
6. Regulatory documents for building materials and products »
K.63 Crushed stone, gravel and sand for construction work »
Evidence base (TR CU, Technical Regulation of the Customs Union) »
014/2011 TR CU. Road safety »
Regulations and standards (to TR TS 014/2011) »
PromExpert »
SECTION I. TECHNICAL REGULATION »
V Testing and control »
4 Testing and control of products »
4.1 Testing and control of products of mining and non-metallic industry »
4.1.2 Non-metallic minerals, materials and products »
ISO classifier »
91 CONSTRUCTION MATERIALS AND CONSTRUCTION »
91.100 Building Materials »
91.100.15 Mineral materials and products »
National standards »
91 CONSTRUCTION MATERIALS AND CONSTRUCTION »
91.100 Building Materials »
91.100.15 Mineral materials and products »
National Standards for KGS (State Standards Classification) »
Latest edition »
Zh Construction and building materials »
Zh1 Construction materials »
Zh17 Inorganic and organic fillers »
National Standards for OKSTU »
CONSTRUCTION MATERIALS, EXCEPT REFINED CONCRETE STRUCTURES AND PARTS »
Non-metallic building materials »
The Document is Replaced With:
GOST 8736-2014: Sand for construction works. Specifications
As a Replacement Of:
GOST 26193-84: Materials from screening after crushing of igneous rocks for construction works. Specifications
GOST 8736-85: Sand for construction work. Technical requirements
The Document References:
GOST 26193-84: Materials from screening after crushing of igneous rocks for construction works. Specifications
GOST 30108-94: Building materials and elements. Determination of specific activity of natural radioactive nuclei
GOST 8267-93: Crushed stone and gravel of solid rocks for construction works. Specifications
GOST 8269.0-97: Mauntainous rock road-metal and gravel, industrial waste products for construction works. Methods of physical and mechanical tests
GOST 8735-88: Sand for construction work. Testing methods
GOST 8736-85: Sand for construction work. Technical requirements
The Document is Referenced By:
GOST 10923-93: Ruberoid. Specifications
GOST 12586.0-83: Reinforced-concrete vibrohydropressed pressure pipes
GOST 13525.13-69: Paper. Methods for determination of greaseproofness
GOST 17608-91: Footway concrete slabs. Specifications
GOST 23558-94: Crushed stone-gravel-sandy mixtures, and soils treated by inorganic binders for road and airfield construction. Specifications
GOST 23735-2014: Sandy-gravel mixtures for construction work. Specifications
GOST 23735-79: Sandy-gravel mixtures for construction work. Specifications
GOST 24099-2013: Decorative facing slabs on basis of natural stone. Specifications
GOST 24594-81: Wall panels and blocks of brick and ceramic stones. General specifications
GOST 25485-89: Cellular concretes. Specifications
GOST 25592-91: Mixes of fly-ash and slag of thermal plants for concretes. Specifications
GOST 25820-2000: Lightweight aggregates concretes. Specifications
GOST 26633-2012: Heavy-weight and sand concretes. Specifications
GOST 26633-91: Heavy-weight and sand concretes. Specifications
GOST 28013-89: Mortars. General specifications
GOST 28196-89: Water-dispersion paints
GOST 28570-90: Concretes. Methods of strength evaluation on cores drilled from structures
GOST 28575-2014: Corrosion protection in construction. Structural concrete. Test of vapour permeability of coatings
GOST 30459-2003: Additives for concretes and mortars. Methods of determining the efficiency
GOST 30459-2008: Admixtures for concretes and mortars. Determination and estimate of the efficiency
GOST 30459-96: Concrete additives
GOST 30491-2012: Organomineral mixtures and soils stabilized by organic binders for road and airfield construction. Specifications
GOST 30491-97: Organic mineral mixtures and soils stabilized by organic dinders for road and airfield construction Specifications
GOST 30629-2011: Materials and products facing of rocks. Test methods
GOST 30629-99: Cladding materials and products made of natural stone. Test methods
GOST 31015-2002: Bituminous stone mastic mixtures and stone mastic asphalt. Specifications
GOST 31356-2007: Dry building cement binder mixes. Test methods
GOST 31357-2007: Dry bulding cement binder mixes. General specifications
GOST 31384-2008: Structural concrete protection against corrosion. General requirements
GOST 31424-2010: Non-metallic construction materials from sifting of crusting solid stone in aggregate manufacturing. Specifications
GOST 31426-2010: Friable rocks for sand, gravel and сrushed gravel for construction works. Technical requirements and test methods
GOST 32021-2012: Hard rock aggregates and fillers for production dre building mixes. Specifications
GOST 32492-2015: Fibre-reinforced polymer bar for concrete reinforcement. Determination of physical-mechanical properties
GOST 32495-2013: Aggregates, fines and its mixtures made from recycled reinforced and non-reinforced concrete. Specifications
GOST 32803-2014: Self-stressing concrete. General specifications
GOST 32943-2014: Materials and systems for the protection and repair of concrete structures. Requirements to bonded connections of structural strengthening elements
GOST 32955-2014: Public roads. Trays for road drainage. Technical specifications
GOST 33320-2015: Ferro-concrete cross ties for railways. General specifications
GOST 3344-83: Slag crushed stone and slag sand for road construction. Specifications
GOST 6133-99: Concrete wall stone. Specifications
GOST 6665-91: Concrete and Reinforced Concrete Curbs. Specifications
GOST 8462-85: Wall materials. Methods for determination of ultimate compressive and bending strength
GOST 8736-2014: Sand for construction works. Specifications
GOST 9128-2009: Asphaltic concrete mixtures for roads and aerodromes and asphaltic concrete. Specifications
GOST 9128-2013: Asphaltic concrete and polymer asphaltic concrete mixtures, asphaltic concrete and polymer asphaltic concrete for roads and aerodromes. Specifications
GOST 9128-97: Asphaltic concrete Mixtures for roads and aerodromes and asphaltic concrete. Specifications
GOST 9758-2012: Porous inorganic aggregates for construction work. Test methods
GOST 9758-86: Non-organic porous aggregates for construction work
GOST R 50773-95: Polymer protective coatings for the improvement of radioactive situation. Methods used to determine the decontamination coefficient and time of protective action
GOST R 52128-2003: Bitumen road emulsions. Specifications
GOST R 52751-2007: Steel-fibro-concrete slabs for bridge spans. Specifications
GOST R 54358-2011: Dry cement base decorative coats for facade’s thermal insulation composite systems with external mortar’s lays. Specifications
GOST R 54359-2011: Dry cement base adhesives, base coats and patching putties for facade’s thermo insulation composite systems with external mortar’s lays. Specifications
GOST R 54401-2011: Automobile roads of general use. Hot road mastic asphalt. Technical requirements
GOST R 54854-2011: Light-weight concretes on phytogenesis organic aggregates. Specifications
GOST R 55052-2012: Reclaimed asphalt. Specifications
GOST R 55063-2012: Kinds of cheese and processed cheese. The rules of tests acceptance, sampling and control methods
GOST R 55361-2012: Milk fat, butter and butter paste made from cow milk. The rules of tests acceptance, sampling and control methods
GOST R 56378-2015: Materials and systems for the protection and repair of concrete structures. Requirements for products repair and bond connections for rehabilitation of structures
KT 17.0-14-3-74: Device of cement concrete pavement. Disassembling rail forms
Manual: Manual for impulse and low consumption fire extinguishing systems
Manual for MGSN 2.09-03: Corrosion protection of concrete and reinforced concrete structures of transport facilities
Manual for SNiP 2.09.03-85: Design Guide for Anchor Bolts for Securing Building Structures and Equipment
Manual for SNiP 2.09.03-85: Manual on designing stand-alone supports and overpasses for process pipelines
Manual for SNiP 2.09.03-85: Conveyor Gallery Design Guide
Manual for SNiP 2.09.03-85: Design of open crane overpasses
Manual for SNiP 2.09.03-85: Design of retaining walls and basement walls
Manual for SNiP 3.06.03-85: Manual for the preparation and use of bitumen road emulsions
Manual for SNiP 3.06.03-85: Manual for the construction of asphalt concrete pavements and foundations of roads and airfields
Manual for SNiP 3.06.03-85: Manual for surface treatment on roads
Manual for SNiP 3.06.03-85: Manual on the construction of coatings and foundations of roads and airfields from soils reinforced with cementing materials to SNiP 3.06.03-85 and SNiP 3.06.06-88
MDS 12-23.2006: Temporary recommendations on the technology and organization of construction of multifunctional high-rise buildings and building complexes in Moscow
MDS 12-24.2006: Installation of ordinary, decorative and waterproofing plaster coatings of building facades
MDS 12-61.2012: The project for the production of works on the device of a rail track of a tower crane with a concrete beam BRP-62.8.3
MDS 31-12.2007: The floors of residential, public and industrial buildings using materials from the company "Henkel Bautechnik." Materials for design and working drawings of nodes
MGSN 2.08-01: Corrosion Protection of Concrete and Reinforced Concrete Structures for Residential and Public Buildings
ODM 218.2.001-2009: Recommendations for the design and construction of culverts of metal corrugated structures on public roads, taking into account regional conditions (road-climatic zones)
ODM 218.2.002-2009: Guidelines for the use of modern materials in the mating pavement with the expansion joints of bridge structures
ODM 218.2.003-2007: Recommendations for the use of polymer-bitumen binders based on SBS-type block copolymers in the construction and reconstruction of roads
ODM 218.2.014-2011: Guidelines for the use of steel-fiber-concrete in the repair of bridge structures
ODM 218.2.017-2011: Guidelines Design, construction and operation of roads with low traffic
ODM 218.2.025-2012: Expansion joints of automobile bridges
ODM 218.2.034-2013: Guidelines for the preparation and use of asphalt mix using recycled asphalt
ODM 218.2.035-2013: Recommendations for the use of fly ash in concrete foundations of roads
ODM 218.2.042-2014: Guidelines. Warm asphalt mixes. Recommendations for use
ODM 218.2.047-2014: Method for assessing the durability of geosynthetic materials used in road construction
ODM 218.2.051-2015: Recommendations for the design and design of anti-tailing structures on highways
ODM 218.2.057-2015: Recommendations for use on bridges for drainage trays made of polymer composite materials
ODM 218.2.079-2016: Recommendations about design macrorough pavings
ODM 218.3.001-2006: Guidelines for the application of polymer-dispersed reinforcement of asphalt concrete using rubber thermoplastic elastomer (RTEP)
ODM 218.3.007-2011: Rationing of the properties of organic binders depending on climatic conditions and operating conditions of coatings
ODM 218.3.015-2011: Guidelines for the construction of cement concrete pavements in sliding forms
ODM 218.3.026-2012: Recommendations for the use of high-density asphalt concrete based on polymer-bitumen binders for road pavements in different climatic conditions of the Russian Federation
ODM 218.3.027-2013: Recommendations for the use of fabric composite materials in the repair of reinforced concrete structures of bridge structures
ODM 218.3.030-2013: Method for calculating reinforced cement concrete pavements of roads and airfields on fortified bases
ODM 218.3.039-2014: Recommendations for testing film-forming materials for the care of freshly laid concrete
ODM 218.3.046-2015: Recommendations about technology of repair of water throughput pipes with use of composite materials
ODM 218.3.054-2015: Device of a surface treatment and thin layers of wear with application of different types of fibers
ODM 218.3.058-2015: Guidelines for the use of synthetic fiber for dispersed reinforcement of hot asphalt concrete
ODM 218.3.076-2016: Guidelines for the selection of soil stabilizers and soil mixtures for road construction
ODM 218.3.077-2016: Guidelines for justifying the parameters of design and technology in the repair of asphalt concrete pavements with layers of cement concrete
ODM 218.5.002-2008: Guidelines for the use of polymer geogrids (geogrids) to reinforce the pavement layers of granular materials
ODM 218.5.007-2016: Guidelines for determining the modulus of elasticity of a static stamp
ODM 218.9.079-2016: Recommendations about design macrorough pavings
ODN 218.2.027-2003: Requirements for deicing materials
ONTP 18-85: All-Union Norms of Technological Design of Nonmetallic Building Materials Enterprises
OSN-APK 2.10.32.001-04: Instructions for the use of chemical additives in concrete and mortars for rural construction
OST 36-72-82: Steel building structures. Field connections on high-strength bolts. Typical technological process.
OST 51.01-06-85: Nature protection. Hydrosphere. Regulations for off-shore drilling and oil and gas production wastes utilization
RD 153-34.2-21.624-2003: Standard instructions for restoring and repairing seals for expansion joints of hydraulic structures
RD 153-39.4-075-01: Rules of maintenance overhaul of oil-trunk pipeline at waterway, railway and category I-IV highway crossings.
RD 31.35.13-90: Instructions for repair of hydraulic structures in maritime transport. Minmorflot, Soyuzmorniiproekt, 1990
RD 34.22.301-88: Procedural Guidelines for Field Inspections of Reinforced Concrete Shells of Cooling Towers
RD 34.26.203: Guidelines for Brick Lining Work During Installation of Boiler Plants and Energy Facilities
RD EO 1.1.2.05.0696-2006: Guidelines for the construction and commissioning of the foundations of turbine units of nuclear power plants
RD EO 1.1.2.05.0697-2006: Guide to the construction and commissioning of reinforced concrete tower cooling towers of nuclear power plants
Recommendations: Aspiration smoke-sensitive alarms VESDA. Part 1. Scope
RMD 23-16-2012 Sankt-Peterburg: Recommendations for energy efficiency in residential and public buildings
RMD 31-04-2008 Sankt-Peterburg: Recommendations for construction of residential and public high-rise buildings
RMD 32-18-2012 Sankt-Peterburg: Recommendations for the use of paving in the paving of residential and public business areas
RMD 32-18-2016 St. Petersburg: Recommendations for the use of paving in the construction of pavements for residential and public and business buildings
RMD 52-01-2006 Sankt-Peterburg: Design and construction of enclosing structures of residential and public buildings using cellular concrete in St. Petersburg. Part I
RMD 52-12-2012 Sankt-Peterburg: Typical temporary concrete fences during work on the city’s road network
RSN 90-85 Gosstroj LitSSR: Instructions for the installation of monolithic floors of livestock buildings of sawdust-cement latex
RTM 17-01-2002: Guiding technical materials on the design and use of steel-fiber-concrete building structures
RTM 17-02-2003: Guiding technical materials on the design and manufacture of steel-fiber-concrete structures on fiber, cut from sheet
RTM 17-03-2005: Guiding technical materials on the design, manufacture and use of steel fiber concrete structures on steel wire fiber
RTM 5-05-2009: Guiding technical materials for the design, manufacture and use of steel fiber concrete structures on the fiber of thin steel wire
RTM 75-95: Process Guidelines for Factory Production of Prefabricated Prestressed Reinforced Concrete Structures -
RU 1.2.1.14.001-2012: Guidance for the repair of concrete, reinforced concrete constructions and hydrotechnical constructions of nuclear power plant stations
SK 6117: The album of constructions of road beds with use of products of processing of industrial and building materials (basalt, waste of concrete and reinforced concrete structures, asphalt concrete, worn out tires, metallurgical slag, burnt molding earth)
SN 277-80: Guidelines for the Fabrication of Cellular Concrete Products
SN 483-76: Instructions for the manufacture of structures and products from concrete, prepared on porous aggregates
SN 525-80: Process Guidelines for Making Polymer Concretes and Polymer Concrete Products
SN 529-80: Process Guidelines for Production of Structures and Products of Dense Silicate Concrete
SN 549-82: Guidelines for the Design, Fabrication, and Application of Structures and Products Made of Organic Fiber Reinforced Concrete (Arbolite)
SNiP 32-03-96: Aerodromes
SNiP 52-01-2003: Concrete and ferroconcrete structures. Principal rules
SNiP 82-02-95: Federal (standard) element cement consumption rates at manufacture of concrete and reinforced concrete products and structures
SNiP I-D.2-70: Car roads. Materials and products
SNKK 22-301-99: Construction in Seismic Areas in the Krasnodar Kray
SP 11-109-98: Prospecting for soil building materials
SP 121.13330.2012: Aerodromes
SP 163.1325800.2014: The designs with application of gypsum plasterboards and gypsum fiber sheets. Terms of design and installation
SP 229.1325800.2014: Reinforced concrete structures of underground and utility systems. Protection against corrosion
SP 23-101-2000: Design of thermal performance of buildings
SP 23-101-2004: Design of thermal protection of buildings
SP 243.1326000.2015: Design and construction of low-volume roads
SP 28.13330.2012: Corrosion protection of buildings structures. Updated living edition of SNiP 2.03.11-85
SP 288.1325800.2016: Forest roads. Rules of design and construction
SP 34.13330.2012: Automobile roads. Updated living edition of SNIP 2.05.02-85
SP 351.1325800.2017: Concrete and reinforced concrete designs from light concrete. Rules of design
SP 37.13330.2012: Industrial transport
SP 46.13330.2012: Bridges and pipes
SP 50.13330.2012: Buildings Heat Insulation. Updated living edition of SNiP 23-02-2003
SP 52-104-2006: Steel fibre reineorced concrete structures
SP 63.13330.2012: Concrete and reinforced concrete structures. General provisions.
SP 70.13330.2012: Bearing and enclosing structures. Updated living edition of SNiP 3.03.01-87
SP 82-101-98: Preparation and use of masonry mortars. To replace SN 290-74. Letter № AB-20-218 / 12 dated 06.17.98.
SP 84.13330.2016: Tramways
SP 98.13330.2012: Tram and trolleybus lines
ST RK 1279-2013: Highways and airfields. Methods for determining the roughness of the road surface and friction coefficient for the vehicle wheels to the road surface
ST RK 1409-2005: Reinforced concrete road signs supports. Specification
ST RK 1447-2005: Pre-stressed reinforced concrete sleepers for railway with gage 1520 mm. General specification
STB 1081-97: Ferro-concrete sleepers, prestressed for 1520 mm gauge railways. Technical conditions
STB 1566-2005: Roads automobile. Test methods
STO 218.5.001-2005: Production of mixtures and the device of a rough thin layer coating (STP)
STO DOKTOR BETON 68686983-001-2011: Dry building mixtures trade mark "ДОКТОР БЕТОН®" for waterproofing and repair concrete construction. Classification. Nomenclature of indicators. Technical requirements
STO DOKTOR BETON 68686983-002-2011: Dry building mixtures trade mark "ДОКТОР БЕТОН®" for waterproofing and repair concrete construction. Technical specifications and quality characteristics
Supplement to SP 63.13330: Toolkit. Calculation of reinforced concrete structures without prestressed reinforcement
TR 101-99: Guide to Good Practice for Use of Grouts and Concretes With "Akvatron-6" Material for Road Construction
TR 103-00: Guide to Good Practice for Constriction of Roads Using Asphalt Concrete
TR 103-07: Technical recommendations for the construction of road structures using asphalt concrete
TR 121-01: Technical recommendations for mastic waterproofing of the internal surfaces of the underground part of buildings and structures
TR 126-01: Technical recommendations on the technology of application of various industrial wastes, dornita in road construction
TR 127-01: Technical recommendations on repair and restoration works of roads, sidewalks, platforms for various purposes with the complex improvement of courtyards
TR 135-02: Technical recommendations on the construction and technology of road construction in areas exposed to increased traffic loads
TR 137-03: Technical recommendations on the use of dry specialized finishing mixtures for exterior and interior work in the construction of new buildings and structures, reconstruction and repair
TR 138-03: Technical recommendations on the use of rolled low cement concrete in pavement structures
TR 140-03: Technical recommendations on the technology of painting the interiors and facades of residential and public buildings under construction
TR 144-04: Technical recommendations on the use of waterproofing materials "Akvatron"
TR 145-03: Technical recommendations for the production of earthworks in road construction, with the device of underground engineering networks, with backfilling of pits, trenches, sinuses
TR 147-03: Technical recommendations for the construction of road structures from cast concrete mixes
TR 159-04: Technical recommendations on the technology of construction of urban roads in the winter
TR 166-04: Technical recommendations for quality assurance of concrete and mortar mixes and prevention of concrete corrosion in reinforced concrete structures
TR 172-05: Technical recommendations for the construction of urban roads with curved side stones
TR 192-08: Technical recommendations on the construction of foundations for intra-quarter roads, incl. under adverse hydrogeological conditions, the presence of underground utilities, trenches, pits
TR 197-08: Technical recommendations on the use of asphalt concrete mixtures modified with old asphalt concrete additives
TR 206-09: Technical recommendations on the design and production of works on the installation of walling pits in the cramped conditions of the existing urban development in Moscow
TR 50-180-06: Technical recommendations for the design and installation of pile foundations using discharge-pulse technology for high-rise buildings
TR 86-98: Guide to Good Practice for Use of Dispersed Reinforced Concrete Mixes for Construction of Cast-in-Place High-Reliability Urban Roadbeds and Pavements
TR 89-99: Technical recommendations for the manufacture and use of building paints and varnishes from the Inteko system for factory and construction conditions
TR 92-99: Technical recommendations on the use of the mineral expanding additive to cements IR-1
TR 97-99: Guide to Good Practice for Comprehensive Site Improvements and Amenities for Residential Complexes
TR 99-99: Technical recommendations on the use of waterproofing mortars and concrete with the material "Akvatron-6" for underground construction
TSN 20-303-2006: Protection of building structures, buildings and structures from aggressive chemical and biological environmental influences. St. Petersburg
TSN 22-302-2000*: Construction in seismic areas of the Krasnodar Territory
TSN 40-303-2003: Trenchless Installation of Utility Lines Using Microtunneling Complexes and Rehabilitation of Pipelines Using Special Equipment
TSN 52-302-2003: Corrosion Protection of Concrete and Reinforced Concrete Structures of Transport Facilities
TU 102-300-81: Weights prefabricated reinforced concrete covering type UBO
TU 102-737-95: Concrete marsh weighting compounds wedge-shaped for pipes with a diameter of 426, 325, 219 (ZUBKm)
TU 102-738-95: Weighted reinforced concrete marsh wedge with a diameter of 530, 426, 525 with low steel reinforcement consumption (1 UBKm, 2 UBKm)
TU 1390-003-86695843-2010: Steel pipes and fittings with internal anti-corrosion cement-sand coating
TU 1461-037-50254094-2004: High-strength cast iron pressure pipes. Technical conditions
TU 4859-002-03984155-99: Steel Pipes with Thermal Insulating and Waterproofing Coatings. Technical Specifications
TU 5718.030.01393697-99: Mixes asphalt concrete crushed stone and mastic and asphalt concrete. Technical specifications
TU 5718-001-00011168-2000: Gravel-Mastic Asphalt Concrete Mixes and Asphalt Concrete
TU 5718-001-53737504-03: Blend of sulfur asphalt concrete cast and cast asphalt concrete
TU 5718-002-04000633-2006: Cast asphalt mix and cast asphalt mixes
TU 5718-002-53737504-01: Poured Gray Asphalt Concrete Mixes and Poured Gray Asphalt Concrete
TU 5718-003-04000633-2006: Asphalt (hot) and asphalt mixes for monolithic road structures
TU 5741-001-41927111-96: Cellular Concrete Wall Blocks and Slabs. Technical Specifications
TU 5745-001-01386160-001: Dispersed concrete mixes-reinforced with steel fiber milled from slab
TU 5745-001-42806964-97: Dry Non-Shrink Mixture Monofleks-A
TU 5853-001-04000633-2006: Adjustable tip manholes. Technical conditions
TU 5870-001-21655395-2000: Cellular Concrete. Technical Specifications
VSN 01-78: Instructions for the design and manufacture of tank equipment of armopolimerbetona
VSN 123-77: Instruction for installation of paving and roadbeds made from crushed stone, gravel and sand materials impregnated with organic binders
VSN 14-95: Guidelines for the Construction of Asphalt Concrete Road Pavements
VSN 16-89: Industry-Specific Specified Quantity Allowances for Materials. Drilling and Blasting Operations
VSN 16-95: Industry-Specific Building Code. Guidelines on the Use of Rolled Lean-Mix Concrete in Road Pavements
VSN 176-78: Guidelines for the Design and Installation of Corrugated Metal Pipe Culverts
VSN 184-75: Technical guidelines for the installation of pavement bases made of stone materials, not reinforced and fortified with inorganic binders
VSN 26-76/Gosgrazhdanstroj: Temporary instruction on the non-heated creation of seams and joints in large-panel residential buildings
VSN 27-76: Technical Instructions for the Use of Bitumen Sludges for Arrangement of Protective Layers on Roads
VSN 51-96: Instruction on construction technology of municipal roads in winter time
VSN 56-97: Design and Basic Principles for Technology for Production of Fiber Reinforced Concrete Structures
VSN 85-68: Technical Guidelines for the Design and Erection of Span Structures of Road and Urban Street Bridges with Pavement Constructed of Reinforced Concrete Slabs Without Applied Waterproofing
VSP 02.01.32/Russian Defense Ministry: Rules for the production and acceptance of work in the construction of aerodromes of the Armed Forces of the Russian Federation
VSP 103-97: Steel Fiber Reinforced Concrete Enclosures for Secure Spaces in Russian Federation Central Bank Facilities. Execution, Quality Control, and Acceptance Requirements
VSP 32-03-04 MO RF: Instructions for the design of drainage and drainage systems on the airfields of airfields
Customers Who Viewed This Item Also Viewed:
|
Controllers acting without
Language: English |
Building materials. Methods for combustibility test
Language: English |
Building materials spread flame test method
Language: English |
Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V. Non-sheathed cables for fixed wiring
Language: English |
Clear sheet glass. Specifications
Language: English |
Steel welded vessels and apparatus. General technical conditions
Language: English |
System of Standards for Occupational Safety and Health (SSBT). Personal protective equipment for respiratory organs. Self-rescuers insulating on chemically bound or with compressed oxygen. Technical requirements. Test methods. Marking. Sampling rules
Language: English |
|
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.