GOST 2477-65
ГОСТ 2477-65
|
|
Petroleum and petroleum products. Method for determination of water content
Нефть и нефтопродукты. Метод определения содержания воды.
Status: Not effective - Superseded
The standard establishes a method for determining water in petroleum, liquid petroleum products, greases, waxes, ceresins, waxes, tar and bitumen. The standard does not apply to bitumen emulsions.
Стандарт устанавливает метод определения воды в нефти, жидких нефтепродуктах, пластичных смазках, парафинах, церезинах, восках, гудронах и битумах. Стандарт не распространяется на битумные эмульсии.
Choose Language:
Format: Electronic (pdf/doc)
Approved: USSR State Committee of Standards, Measures and Measuring Instruments,
6/26/1965
SKU: RUSS16051
The Product is Contained in the Following Classifiers:
Evidence base (TR CU, Technical Regulation of the Customs Union) »
030/2012 TR CU. On requirements for lubricants, oils and special fluids »
Regulations and standards (to 030/2012 TR CU) »
PromExpert »
SECTION I. TECHNICAL REGULATION »
V Testing and control »
4 Testing and control of products »
4.2 Testing and control of products of fuel and energy industry »
4.2.2 Oil, oil products and gas »
ISO classifier »
75 EXTRACTION AND PROCESSING OF OIL, GAS AND RELATED PRODUCTION »
75.080 Petroleum products in general »
National standards »
75 EXTRACTION AND PROCESSING OF OIL, GAS AND RELATED PRODUCTION »
75.080 Petroleum products in general »
National Standards for KGS (State Standards Classification) »
Latest edition »
B Oil products »
B0 General rules and regulations for oil refining industry »
B09 Test methods. Packaging. Marking »
National Standards for OKSTU »
OIL, PETROLEUM PRODUCTS, GAS »
Control methods (testing, analysis, measurements) »
The Document is Replaced With:
GOST 2477-2014: Petroleum and petroleum products. Method for determination of water content
As a Replacement Of:
GOST 1044-41: Determination of water content in greases
GOST 2477-44: Petroleum products. Quantitative determination of water content
GOST 8656-57: Oils and dark oil products. Dewatering by distillation
The Document References:
GOST 12433-83: Standard isooctanes. Specifications
GOST 14710-78: Petroleum toluene
GOST 1770-74: Laboratory volumetric glassware. Cylinders, beakers, measuring flasks, test tubes. General specifications
GOST 2517-85: Crude oil and petroleum products. Methods of sampling
GOST 25336-82: Laboratory glassware and equipment. Basic parameters and dimensions
GOST 2603-79: Reagents. Acetone. Specifications
GOST 26432-85: Petroleum liquid fuels. Limited list and order of application
GOST 2768-84: Acetone technical. Specifications
GOST 4095-75: Isooctane for industrial use. Specifications
GOST 5789-78: Reagents. Toluene. Specifications
GOST 9147-80: Laboratory porcelain ware and apparatus. Specifications
GOST 9410-78: Petroleum xylol. Specifications
The Document is Referenced By:
FR 1.29.2009.06689: Recommendation. State system for ensuring uniformity of measurements. Mass and volume of petroleum products. Measurement procedure in vertical tanks
FTS ZhT TsT 063-2000: Locomotives and multiple units. Wheel sets with axle boxes. Requirements for certification
GOST 1013-49: Aviation oils. Specification
GOST 10200-83: Electrode coal-tar pitch
GOST 10289-79: Oil for marine gas turbines
GOST 1033-51: Grease universal mid-melting US (grease fat). Specification
GOST 1033-79: Fatty cup grease. Specifications
GOST 10363-78: Oil ЭШ for hydraulic systems of high-load mechanisms. Specifications
GOST 1038-75: Coal-tar pitch. Specifications
GOST 10433-75: Fuel oil for gas-turbine plants. Specifications
GOST 10534-78: Sulphonated additive CБ-3. Specifications
GOST 10541-78: Automobile motor oils for carburetor engines
GOST 10584-63: Additives MNI to oils and greases. Technical requirements
GOST 10585-2013: Petroleum fuel. Mazut. Specifications
GOST 10585-75: Black oil fuel
GOST 10585-99: Oil fuel. Mazut. Specifications
GOST 10586-63: Lube PVK (gun oil). Technical requirements
GOST 10835-78: Shale oil for wood impregnation. Specifications
GOST 10877-64: Conservation lube K-17. Technical requirements
GOST 10877-76: Preservative oil K-17
GOST 11010-64: Fat synthetic for the leather industry (tannery lube). Technical requirements
GOST 11010-84: Synthetic fat for leather industry. Specifications
GOST 11011-85: Petroleum and its products. Method for determination of fraction composition by apparatus APH-2
GOST 11059-64: Lubricant for conservation SCC. Technical requirements
GOST 11110-64: Grease ЦИАТИМ-202. Technical requirements
GOST 11110-75: Grease ЦИАТИМ-202. Specifications
GOST 11126-88: By-product coke raw materials for the production of commercial carbon
GOST 11311-76: Coal phenol. Specifications
GOST 11312-74: Technical coal ortho-cresol. Specifications
GOST 11313-75: Technical coal dicresol. Specifications
GOST 11314-82: Commercial coal xylenols
GOST 11851-85: Petroleum. Method of paraffin determination
GOST 12030-66: Lubricants VNII NP-223. Technical requirements
GOST 12031-66: Grease for electroweak (lubrication VNII NP-262). Technical requirements
GOST 12261-87: Afk additive
GOST 12337-84: Motor oils for diesel engines
GOST 12672-77: Oil for rolling mills ПС-28. Technical specifications
GOST 13302-77: Petroleum acids
GOST 13374-86: Instrument oil ВНИИ НП-1-ЧМО. Specifications
GOST 13835-73: Low-molecular thermal shock resistant synthetic rubber СКТН. Specifications
GOST 14038-78: Shale oils. Method for determination of mechanical impurities and ash
GOST 14203-69: Oil and petroleum products. Capacitance method of determination of water content
GOST 14296-78: Grease ВНИИ НП-279. Specifications
GOST 14298-79: Oil fuel for open-hearth furnaces. Specifications
GOST 1431-85: Petroleum products and additives. Method for the determination of sulfur by fusing in a crucible
GOST 15037-69: Grease for impregnating organic strand cores of wire rope
GOST 1544-52: Bitumen petroleum for road. Specification
GOST 16105-70: Grease ВНИИ НП-257. Specifications
GOST 16106-82: Coal-chemical naphthalene. Specifications
GOST 1631-61: Grease 1-13 of fat. Technical requirements
GOST 16422-79: Transmission grease ЦИАТИМ-208. Specifications
GOST 1667-68: Motor fuel for medium- and low-speed diesel engines
GOST 16728-78: Oil ВНИИ НП-403. Specifications
GOST 16862-71: Grease ВНИИ НП-263. Specifications
GOST 1707-51: Industrial oils (spindle and machine). Specification
GOST 1709-75: Coal-tar vanishes. Specifications
GOST 1720-76: Crude coal anthracene
GOST 17601-90: Marine centrifugal separators. Acceptance and methods of tests
GOST 1805-51: Instrument oil (MEP). Specification
GOST 1805-76: Apparatus oil МВП. Specifications
GOST 18179-72: Grease OKБ-122-7. Specifications
GOST 1840-51: Oils for high-speed machinery. Specification
GOST 1841-51: Cylinder light oils (Viscosin, cylinder 2). Specification
GOST 18499-73: Kerosene for technical purposes. Specification
GOST 18509-88: Tractor and combine diesel engines. Methods of bench tests
GOST 1861-73: Compressor oils
GOST 1862-63: Motor-tractor oils. Technical requirements
GOST 19337-73: VNII NP-274 grease
GOST 19537-83: Gun grease. Specifications
GOST 19538-74: Putty ЗЗК-3у. Specifications
GOST 1957-52: Grease universal refractory UT (fat konstalin). Specification
GOST 1957-73: Constaline grease. Specifications
GOST 19774-74: Grease ВНИИ НП-207. Specifications
GOST 19791-74: Axle box grease ЛЗ-ЦНИИ. Specifications
GOST 19832-87: Grease ВНИИ НП-260. Specifications
GOST 19932-99: Petroleum products. Determination of carbon residue. Conradson method
GOST 20421-75: Grease ВНИИ НП-242. Specifications
GOST 20458-89: Grease Torsiol-55. Specifications
GOST 20734-75: Hydraulic fluid 7-50C-3. Specifications
GOST 20799-75: Industrial oils. Specifications
GOST 20799-88: Industrial oils Specifications
GOST 21046-86: Waste petroleum products
GOST 21150-87: Litol-24 grease
GOST 21261-75: Petroleum products. Method for determination of specific heat of combustion
GOST 21261-91: Oil products. Method for the determination of gross calorific value and calculation of net calorific value
GOST 21743-76: Aviation oils
GOST 21748-76: Oil MЗ-52. Specifications
GOST 2177-99: Petroleum products. Methods for determination of distillation characteristics
GOST 21822-87: Petroleum fragile bitumens. Specifications
GOST 2264-75: Technical coal tricresol. Specifications
GOST 23008-78: Shock absorber liquid AЖ-12т. Specifications
GOST 23239-89: Synthetic fat acids C5-C6, C7-C9, C5-C9, C10-C13, C10-C16, C17-C20 fractions. Specifications
GOST 23497-79: Motor oils M-14B23 and M-20B2. Specifications
GOST 23510-79: UNIOL-2 Grease. Specifications
GOST 23639-79: Additive KP
GOST 23652-79: Transmission oils
GOST 23683-89: Hard petroleum paraffines
GOST 23783-79: Synthetic primary fatty alcohols. C16-C21 fractions. Specifications
GOST 2488-47: Ceresin. Specifications
GOST 2488-79: Ceresin. Specifications
GOST 25770-83: High-speed diesel engine motor oils for transport vehicles
GOST 2593-2014: Hose connections for railway rolling stock. Specifications.
GOST 2605-51: Grease fat for leather footwear. Specification
GOST 2649-52: Ammunition lube. Specification
GOST 2712-52: Grease АМС. Specifications
GOST 2712-75: Grease АМС. Specifications
GOST 2770-74: Goal-tar oil for wood impregnation. Specifications
GOST 28357-89: Coke-chemical products. Rapid method for determination of mass fraction of substances insoluble in toluene
GOST 2854-51: Industrial leached oils. Specification
GOST 2889-80: Bitumen hot mastic for roofing. Technical requirements
GOST 29039-91: Technical oleic acid. Acceptance rules and test methods
GOST 2967-52: Lubrication for instruments AF-70 (grease UNMA). Specification
GOST 3005-51: Lubrication for cannon (lubrication UNZ). Specification
GOST 3045-51: Gun oil VO. Specification
GOST 305-82: Diesel fuel. Specifications
GOST 30745-2001: Agricultural tractors. Measurement of propulsion performance characteristics
GOST 30747-2001: Agricultural tractors. Measurement of characteristics tested through the power take-off shaft
GOST 30749-2001: Agricultural tractors. Measurement of the driving axles power
GOST 31378-2009: Oil. General specifications.
GOST 31402-2013: Brake cylinders for railway rolling stock. General specifications
GOST 32510-2013: Marine fuels. Specifications
GOST 3257-53: Industrial lubrication for rolling mills (IP-1 grease). Specification
GOST 3260-54: Ammo grease (grease VS). Specification
GOST 3260-75: Lubricant projectile sun. Technical conditions
GOST 3276-63: Lube GOI-54p. Technical requirements
GOST 3276-89: Lubricating grease ГОИ-54п. Specifications
GOST 3333-55: Grease of graphite (USSA). Specification
GOST 3333-80: Graphite lubricant
GOST 3508-55: Bitumen of petroleum, special. Specification
GOST 3546-60: Composition, impregnating, for wires and cables. Technical requirements
GOST 3677-76: Ceresin composition. Specifications
GOST 4.23-83: Quality ratings system. Plastic greases. Quality characteristics nomenclature
GOST 4096-62: Petrolatum. Technical requirements
GOST 4105-48: Semi-tar. Specification
GOST 4113-48: Composition for the protection of ammunition (lubricant PP-95/5). Specification
GOST 4113-80: Preventive composition ПП 95/5. Specifications
GOST 4118-53: Asidol. Specification
GOST 4225-54: Perfume oil. Specifications
GOST 4225-76: Perfume oil. Specifications
GOST 4254-76: Diphenil technical. Specifications
GOST 4366-64: Synthetic grease. Technical requirements
GOST 4366-76: Grease synthetic solidol. Specifications
GOST 4806-79: Shale oil fuel. Specifications
GOST 4874-49: Lubrication rotary (lubrication IR). Specification
GOST 4952-49: Lubrication for textile (lubrication IT). Specification
GOST 4960-75: Electrolytic copper powder. Specifications
GOST 5078-49: Grease VL. Specification
GOST 5262-50: Colloidal graphite preparations, oil-based
GOST 5344-82: Emulsionized paste for leather industry. Specifications
GOST 542-50: Car transmission oil. Specification
GOST 5570-50: Lubrication industrial rope IR (rope ointment). Specification
GOST 5573-50: Grease for airplane refractory ST (lubricant NK-50). Specification
GOST 5649-51: Industrial Lubrication for bearings of Karetnikova IPK. Specification
GOST 5656-60: Graphite grease BVN-1. Technical requirements
GOST 5703-65: Synthetic constaline Specification
GOST 5730-51: Automobile grease for the front drive axle AM (cardan). Specification
GOST 5774-76: Condenser vaselin. Technical requirements
GOST 610-72: Oils for axle journals. Specifications
GOST 6267-59: Grease ЦИАТИМ-201. Technical requirements
GOST 6267-74: Grease ЦИАТИМ-201. Specifications
GOST 6360-58: Oils MT. Specification
GOST 6360-83: MT-16P and M-16PC oils.
GOST 6411-52: Heavy oils for cylinders (Vapor, cylinder 6). Specification
GOST 6411-76: Heavy cylinder oils
GOST 6484-96: Stearine. Specifications
GOST 6617-76: Petroleum construction bitumen
GOST 6708-53: Industrial lubrication for rolling mills (IP-2 grease). Specification
GOST 6794-75: Oil АМГ-10. Specifications
GOST 7171-63: Petrol-resisting grease. Technical requirements
GOST 7171-78: Petrol-resisting grease. Specifications
GOST 7580-55: Oleine technical acid
GOST 7611-75: Oil for ventilating filters. Specifications
GOST 7613-55: Oil shale - softener for the regeneration of rubber. Specification
GOST 781-51: Bitumen petroleum alkaline (rubrax). Specification
GOST 781-78: Bitumen oil high-melting softener
GOST 782-59: Grease UN (technical vaseline). Technical requirements
GOST 783-53: Oil tar. Specification
GOST 8.589-2007: State system for ensuring the uniformity of measurements. Conducting registration operations on items of reception-delivery of oil in the petrowire systems
GOST 8312-57: Additive CIATIM-339. Specification
GOST 8551-57: Grease ЦИАТИМ-205. Technical requirements
GOST 8551-74: Grease ЦИАТИМ-205. Specifications
GOST 8581-78: Motor oil for automobile and tractor
GOST 8622-57: Component of greases. Synthetic fatty acids. Technical requirements
GOST 8804-58: Lubricant, industrial, metallurgical № 10. Technical requirements
GOST 8893-58: Grease conservative TSIATIM-215. Technical requirements
GOST 9.015-74: Unified system of corrosion and ageing protection. Underground constructions. General technical requirements
GOST 9185-59: Conservation lube K-15. Technical requirements
GOST 9243-75: KS-19 compressor oil
GOST 9432-60: Automobile lubricant
GOST 9433-60: Grease ЦИАТИМ-221. Technical requirements
GOST 9433-80: Grease ЦИАТИМ-221. Specifications
GOST 9548-74: Roofing petroleum bitumens. Specifications
GOST 9549-80: Copper naphthenate for preservative compounds. Specifications
GOST 9762-61: Grease МС-70. Technical requirements
GOST 9762-76: Grease МС-70. Specifications
GOST 9811-61: Liquid gun grease RZ. Technical requirements
GOST 9965-76: Petroleum for oil-processing plants. Specifications
GOST 9972-74: Petroleum turbine oils with additives
GOST 9974-62: Lubricant, industrial, metallurgical № 137. Technical requirements
GOST 9975-62: Acids, synthetic, fatty for the production of lubricants (SZHS). Specification
GOST R 51858-2002: Crude petroleum. General specifications
GOST R 51907-2002: Motor oil for marine diesels М-20Г2СД. Specifications
GOST R 52755-2007: Liquid composite fuel. Specifications
GOST R 53844-2010: Vehicles. Fine filters of oil for automobile, tractor and combine engines. Technical requirements and test methods
GOST R 54299-2010: Marine fuels. Specifications
GOST R 54389-2011: Stable gas condensate. Specifications
GOST R 55419-2013: Composite material based on active rubber powder, modifying asphalt mixes. Technical requirements and test methods
GOST R 55775-2013: Aviation oil МС-8П. Specifications
GOST R 8.595-2004: State system for ensuring the uniformity of measurements. Mass of petroleum and petroleum products. General requirements for procedures of measurements
GOST R 8.615-2005: State system for ensuring the uniformity of measurements. The measuring of quantity of taken from bowels oil and oil gas. General metrological and technical requirements
GOST R 8.786-2012: State system for ensuring the uniformity of measurements. Fuel oil mass. Measurement procedure in horizontal storage tanks by indirect method of static measurements. General metrological requirements
GOST R 8.787-2012: State system for ensuring the uniformity of measurements. Mass of mazut. Measurement of the fuel oil mass in railway tanks. General metrological requirements
Letter 1681/05-SM: About the application of the standards
Manual: Manual for impulse and low consumption fire extinguishing systems
Manual for SNiP 3.06.03-85: Manual for the preparation and use of bitumen road emulsions
Manual for SNiP 3.06.03-85: Manual for the construction of asphalt concrete pavements and foundations of roads and airfields
Manual for SNiP 3.06.03-85: Manual for surface treatment on roads
Manual for SNiP 3.06.03-85: Manual on the construction of coatings and foundations of roads and airfields from soils reinforced with cementing materials to SNiP 3.06.03-85 and SNiP 3.06.06-88
MI 1974-2004: State system for ensuring uniformity of measurements. Turbine flow transducers. Method of verification
MI 2092-90: Recommendation. State system for ensuring uniformity of measurements. Mass of fuel oil in railroad tank cars. The method of measurement by the volume-mass method
MI 2366-96: Recommendation. State system for ensuring uniformity of measurements. Hydrometers of oil type UDVN. Verification Method
MI 2418-97: State system for ensuring uniformity of measurements. Classification and application of technical means for testing oil and petroleum products
MI 2693-2001: Crude Oil Metering Oil Production Facilities
MI 2735-2002: Recommendation. GSE. A lot of oil. Methods for measuring the system of measuring the quantity and quality of oil UUN NSP "Sergeevka" NGDU "Ufaneft"
MI 2837-2003: Oil hand-over and acceptance points metrological and technical support
MI 2950-2005: Recommendation. State system for ensuring uniformity of measurements. A lot of oil. Methods for performing measurements in horizontal tanks in the system of the main pipeline transport
MI 2951-2005: State system for ensuring uniformity of measurements. Crude oil mass. Methods of measurement in vertical tanks in the system of main pipeline transport
MI 2952-2005: State system for ensuring uniformity of measurements. Crude oil mass. Methods of measurement in railway tanks in the system of main pipeline transport
MI 2953-2005: State system for ensuring uniformity of measurements. Crude oil mass. Methods of measurement in automobile tanks in the system of the main oil pipeline transport
MI 2972-2006: State system of measuring uniformity provision. Petroleum mass. Method of measuring by the system of petroleum quantity and properties measuring system No.1005 JSC ´Shugurovskiy petrochemical plant´
MI 2975-2006: State system of measuring uniformity provision. Petroleum mass. Indirect measuring method of dynamic measurements on the registration point pump station 'Suslovo' JSC 'Uraltransnefteproduct'
MI 3200-2009: Recommendation. GSE. Mass of crude oil. Methods of measuring the system of measuring the amount and parameters of crude oil at the temporary loading point of the Bayandy field at the Chamber of Commerce and Industry Usinskneftegaz OOO Lukoil-Komi
MI 3241-2009: Recommendation. State system for ensuring uniformity of measurements. Mass and volume of petroleum products. Measurement technique indirect method of dynamic measurements
MI 3301-2010: Recommendation. State system for ensuring uniformity of measurements. Oil product pipeline. Acceptance points of petroleum products. Metrological and technical support
MI 3342-11: Recommendation. GSE. Requirements for testing laboratories that monitor the quality of oil
MI 3380-2012: State system for ensuring uniformity of measurements. Volume flow transducers. Methods of verification on-site calibration equipment
MI 3532-2015: State system for ensuring the uniformity of measurements. Recommendations on definition of weight of oil at registration operations with application quantity measures and indicators of oil quality
NB ZhT TsP 064-2003: Special purpose rolling stock. Wheelsets with axle boxes. Safety regulations
ODM 218.3.007-2011: Rationing of the properties of organic binders depending on climatic conditions and operating conditions of coatings
ODM 218.5.008-2008: Methodical recommendations on the use of a crack-interrupting layer when constructing road pavements with a polymer-asphalt-concrete coating (for experimental implementation)
OST 153-39.2-048-2003: Oil. Crude oil. Routine research of reservoir fluids and separated oil. Scope of research and presentation of results.
OST 38.01445-88: Lubrication and cooling liquid MR-7. Technical conditions
OST 39-112-80: Oil. Crude oil routine research, Scope of research. Presentation of the results.
OST 39-114-80: Industry-based uniformity measurement system. Procedure of liquid quantity measurements using block metering equipment “Sputnik” and determination of well flow rates by liquid and oil.
OST 51.65-80: Stable gas condensate. Technical conditions.
R 50.2.040-2004: Metrological assurance of oil accounting when transferring via main pipeline system. Basic provisions
RD 153-34.0-04.202-98: Procedural Guidelines. Certification of Departments of Energy Facilities Performing Quantitative Chemical Analysis. Organization and Procedure
RD 153-34.0-44.221-2000: Guidelines for Quality Control of Diesel Fuel at Thermal Power Stations During Acceptance, Storage, and Use of it as Main, Backup, or Start-Stop Fuel in Gas Turbine and Steam-Gas Units
RD 153-34.1-43.106-2001: Model Guidelines for Acceptance, Storage, and Use of Fireresistant Turbine Oils Type OMTI
RD 153-39.2-048-00: Methods for determining the effectiveness of the use of systems for trapping light fractions of oil from reservoirs
RD 153-39-011-97: Instruction on accounting of oil products on trunk oil-products pipelines.
RD 153-39-019-97: Methodical instructions for determining the technological losses of oil at the enterprises of oil companies of the Russian Federation
RD 212.0182-02: Manual for technical operation of inland waterway vessels
RD 31.2.07-2001: Fuels, oils, lubricants and special liquids for ships of sea transport. Nomenclature and scope
RD 31.28.52-79: Methods of physico-chemical control of the working environments of ship equipment
RD 34.09.109: Procedural Guidelines for Inventory of Liquid Fuel at Electric Power Generating Stations
RD 34.09.604-89: Model Guidelines for Organization of Collection and Rational Use of Used Petroleum Products at Thermal and Hydroelectric Generating Stations, Electrical Networks, and Repair Facilities Administered by Minenergo USSR
RD 34.11.111-89: Methodology instructions. State analysis of metrological industrial support at energy providers and sectoral research institutes
RD 34.11.321-96: Standards for Error in Measurement of Process Parameters of Thermal Power Stations and Substations
RD 34.21.525: Procedural Guidelines for Cleaning Bottom Deposits from Fuel Oil Tanks
RD 34.43.301: Guidelines for Collection, Storage, and Rational Use of Used Oils in Construction Organizations Administered by Minenergo USSR
RD 34.44.206-93: Petroleum Fuel. Method for the Determination of Hydrogen
RD 34.44.215-96: Methods for the Determination of Quality of Water-Fuel Oil Emulsions Used n the Form of Liquid Boiler Fuel
RD 39-0147103-309-88: Provisions on the Procedure of Development, Coordination, and Approval of Technological Order (REGLAMENT) for Crude Oil Treatment Plants.
RD 39-030-90: Technology of complex processing of oil emulsions by demulsifiers and corrosion inhibitors
RD 39-1-1261-85: Technological regulations on the use of demulsifiers in oil preparation processes
RD 39-1-380-80: Method for determining the content of iron sulfide in the oil phase of emulsions
RD 39-30-678-82: Instructions for the accounting of oil at oil pipelines
RD 39-30-731-82: Typical methodology for conducting comparative measurements of the amount of marketable oil by meters and calibrated reservoirs at oil collection points
RD 39-3-943-83: Instructions for use of the corrosion inhibitor ANP-2M for the protection of pipelines of a system for collecting waterlogged oil
RD 39-3-944-83: Standard provision for a laboratory that performs oil analyzes during acceptance operations and produced water
RD 39-3-970-83: Guidelines for organizing the collection and rational use of spent petroleum products at enterprises of the Ministry of Oil and Gas Industry
RD 39-5-649-81: Rules of industrial commissioning of petroleum quantity measuring systems
RD 39-5-760-82: Guidelines. Certification of analytical laboratories of oil industry enterprises
RD 39-5-770-82: Instructions On Determination of Oil Quantity On Automated Metering Systems With Turbine Counters During Metering Or Calculations
Recommendations: Aspiration smoke-sensitive alarms VESDA. Part 1. Scope
RMG 100-2010: State system for ensuring the uniformity of measurements. Recommendations about definition of weight of oil at registration operations with application quantity measures and indicators of quality of oil
RMG 85-2009: National Measurement Assurance System. Mass of oil. Methods of measurement in railway tanks in the system of main oil pipeline transport. The main provisions
RMG 86-2009: State system for ensuring the uniformity of measurements. Mass of petroleum. Measurement procedure in vertical tanks in the main petrowire systems. Basic propositions
RMG 87-2009: National Measurement Assurance System. Mass of oil. Methods of measurement in horizontal tanks in the system of main oil pipeline transport. The main provisions
RMG 88-2009: National Measurement Assurance System. Mass of oil. Methods of measurement in motorcar tanks in the system of main oil pipeline transport. The main provisions
RMG 94-2009: State system for ensuring the uniformity of measurements. Test laboratories performing of the quality control of oil at acceptance operations. Basic requirements
Rules on the Selection of Pressure Vessels and Equipment: Instruction on the selection of pressure vessels and devices operating under pressure of 100 kgf/cm2 and overpressure protection, Ministry of Petroleum Energy
SO 34.09.114-2001: Guidelines for quality control of solid, liquid and gaseous fuels for the calculation of specific fuel consumption at thermal power plants
ST RK 2467-2014: Oil for hydrostatic transmissions MGE-46V. Specifications.
ST RK 2468-2014: Hydraulic oil AUP. Specifications.
ST RK 2470-2014: All-seasons hydraulic oil (VMGZ) Specifications.
ST RK 2471-2014: Motor oils All Season universal categories sf, sj, sl, sm, sn, cf-4, cg-4, ch-4, cl-4, cj-4 api. Specifications.
ST RK 2472-2014: Oils for automatic transmission systems. Specifications.
ST RK 2473-2014: Multigrade oil for mechanical transmission systems Category gl-4, gl-5. Specifications.
ST SSFZhT TsP 086-2000: Special rolling stock. Wheel pairs with axle boxes and their components. Typical test methods for strength.
ST SSFZhT TsT 085-2000: Locomotives and wagon rolling stock. Wheel pairs with axle boxes and their components. Typical test methods for strength.
ST SSFZhT TsT TsL TsV-137-2002: Rolling stock of mainline railways. Axle box rolling bearings. Standard testing method.
TU 0253-053-00151911-2008: Industrial oils
TU 38.1011299-2006: IPM 10 aviation oil
TU 38.101821-2001: Turbine oil TP-22C. Technical conditions
TU 38.101821-2013: Turbine oil Тп-22С brand 1. Specifications
TU 38.101950-00: ERA grease (VNIINP-286M)
TU 38-101821-83: Turbine oil TP-22C. Technical conditions
TU 38-101937-83: Oil softener for the rubber industry
TU 39-1435-89: Oil for transportation to consumers. Technical conditions
VSN 123-77: Instruction for installation of paving and roadbeds made from crushed stone, gravel and sand materials impregnated with organic binders
Customers Who Viewed This Item Also Viewed:
 |
Jet fuels
Language: English |
State system for ensuring the uniformity of measurements. Measurements of liquids and gases flow rate and quantity by means of orifice instruments. Part 5. Measurement procedure
Language: English |
Molded parts of coupler and automatic coupler devices of railway rolling stock. General specifications.
Language: English |
Main-line diesel locomotives. General technical requirements.
Language: English |
Four-wheel bogies of freight cars for mainline railways gauge 1520 (1524) mm. Specifications
Language: English |
Technical ethylcellosolve. Specifications
Language: English |
Automatic coupler model SA-3 and its components. Design and dimensions
Language: English |
Railway rolling stock. Devices to prevent running gear parts from dropping to the track. Methods of controlling strength characteristics
Language: English |
Electric heating devices for heating rolling stock railways. Safety requirements and test methods
Language: English |
Ice cream. General technical requirements
Language: English |
Welded joints in steel structures of railway rolling stock. Requirements for design, implementation and quality control
Language: English |
Locomotives The method of dynamic strength tests
Language: English |
Railway rolling stock. Norms for permissible exposure of railway track and test methods
Language: English |
Locomotives. Requirements for strength and dynamic qualities
Language: English |
 |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.