imgalt

GOST 10296-79

ГОСТ 10296-79

Isol-hydroinsulating material. Specifications

Изол технические условия

Status: Valid - Supersedes

The standard applies to insulated baseless waterproofing material obtained from rubber-binder and technological additives for waterproofing building structures, bridges and tunnels, as well as to protect the outer surface of steel pipes of heat networks at temperatures up to 140 ° C.

Стандарт распространяется на изол-безосновный рулонный гидроизоляционный материал, получаемый из резинобитумного вяжущего с технологическими добавками и предназначенный для гидроизоляции строительных конструкций, мостов и тоннелей, а также для защиты наружной поверхности стальных труб тепловых сетей при температуре до 140 °С.

Choose Language: 
Format: Electronic (pdf/doc)

Approved: Gosstroy of the USSR (State Committee of the Council of Ministers of the USSR for Construction), 12/29/1978

SKU: RUSS16071

Price: $132.66



imgalt

The Product is Contained in the Following Classifiers:

Construction (Max) » Regulations » Documents System of normative documents in construction » 6. Regulatory documents for building materials and products » K.65 Roofing, waterproofing and sealing materials and products »

ISO classifier » 91 CONSTRUCTION MATERIALS AND CONSTRUCTION » 91.100 Building Materials » 91.100.15 Mineral materials and products »

National standards » 91 CONSTRUCTION MATERIALS AND CONSTRUCTION » 91.100 Building Materials » 91.100.15 Mineral materials and products »

National Standards for KGS (State Standards Classification) » Latest edition » Zh Construction and building materials » Zh1 Construction materials » Zh14 Roofing and waterproofing materials »

National Standards for OKSTU » CONSTRUCTION MATERIALS, EXCEPT REFINED CONCRETE STRUCTURES AND PARTS » Roll roofing and waterproofing materials (soft roofing and insulating materials) »


As a Replacement Of:

GOST 10296-71: Insulation

The Document References:

GOST 12.3.009-76: Occupational safety standards system. Loading and unloading works General safety requirements

GOST 12085-88: Concentrated natural chalk. Specifications

GOST 12871-93: Chrysotile asbestos - chrysotile. General specifications

GOST 14192-96: Cargo marking

GOST 16337-77: High-pressure polyethylene. Specifications

GOST 16338-85: Low-pressure polyethylene. Specifications

GOST 17498-72: Chalk. Kinds, marks and general technical requirements

GOST 19433-88: Dangerous goods. Classification and marking

GOST 21235-75: Ground talc and talcmagnesite. Specifications

GOST 22245-90: Viscous petroleum road bitumens. Specification.

GOST 2678-94: Rolled roofing and waterproof materials. Methods of testing

GOST 2770-74: Goal-tar oil for wood impregnation. Specifications

GOST 30244-94: Building materials. Methods for combustibility test

GOST 30402-96: Building materials Ignitability Test Meth

GOST 30547-97: Roofing and hydraulic insulating materials in rolls General specifications

GOST 9548-74: Roofing petroleum bitumens. Specifications

The Document is Referenced By:

Disposition 113-r: Typical solutions to restore the bearing capacity of the roadbed and to ensure the strength and frost resistance of road surfaces on the heaving sections of roads

GOST 26653-2015: Preparation of general cargoes for transportation. General requirements

GOST 9.015-74: Unified system of corrosion and ageing protection. Underground constructions. General technical requirements

GOST R 70406-2022: Outdoor engineering networks. Installation and testing of external hot pipelines made of flexible nonmetallic pipes. Rules and control of work performance

KT 17.0-19-5-74: Device of cement concrete pavement. Cutting of seams in freshly laid concrete by the chaser DNHS-60

Manual for SNiP 2.03.11-85: A manual for monitoring the state of building metal structures of buildings and structures in aggressive environments, conducting surveys and designing the restoration of corrosion protection of structures

Manual for SNiP 2.03.11-85: Designer's Guide to Corrosion Protection for Concrete and Reinforced Concrete Structures

Manual for SNiP 2.03.11-85: Manual on the design of corrosion protection for stone, reinforced stone and asbestos-cement structures

Manual for SNiP 2.05.02-85: Guide to the design of the subgrade of roads on soft soils

Manual for SNiP 2.05.02-85: Manual on the design of methods for regulating the water-thermal regime of the upper part of the subgrade

MDK 2-04.2004: Methodological manual for the maintenance and repair of housing

ODM 218.2.017-2011: Guidelines Design, construction and operation of roads with low traffic

ODM 218.2.094-2018: Guidelines for the design of the subgrade of the public roads from the local thawed and frozen wet clay and peat soils in areas of permafrost

OST 66-14-86: Ferroconcrete complex plates. Specification.

RD 31.11.21.16-2003: Safety regulations for sea freight

RD 31.11.21.16-96: General cargo shipping safety rules. General requirements and provisions.

RD 31.35.01-80: Guidelines for corrosion protection of marine port facilities designed for handling chemicals. Minmorflot, Soyuzmorniiproekt, 1980

RD 34.20.131: Instructions for the protection of heat networks from electrochemical corrosion

RD 34.20.518-95: Standard Guidelines on External Corrosion Protection of Piped Heat Distribution Systems

Recommendations: Aspiration smoke-sensitive alarms VESDA. Part 1. Scope

RSN-88: Design and Construction of Roads and Highways in Non-Chernozem Areas of the RSFSR

Rules on the Selection of Pressure Vessels and Equipment: Instruction on the selection of pressure vessels and devices operating under pressure of 100 kgf/cm2 and overpressure protection, Ministry of Petroleum Energy

SN 542-81: Instructions for the design of thermal insulation of equipment and pipelines of industrial enterprises

SNiP 2.01.53-84: Blacking out of populated areas and economic objects

SNiP 41-03-2003: Designing of thermal insulation of equipment and pipelines

SP 229.1325800.2014: Reinforced concrete structures of underground and utility systems. Protection against corrosion

SP 31-116-2006: Design and installation of roofing of copper sheet

SP 61.13330.2012: Designing of thermal insulation of equipment and pipe lines

TR 12220-TI.2001: URSA thermal insulation products in the construction of thermal insulation of industrial equipment. Recommendations for use with technical solutions album

TSN 23-337-2002: Thermal insulation of equipment and pipelines. Sverdlovsk region

TU 102-236-80: Panels of volume blocks of type OB and boxes of type UB

TU 4859-002-03984155-99: Steel Pipes with Thermal Insulating and Waterproofing Coatings. Technical Specifications

VSN 130-92: Execution and Acceptance Requirements for Sealing Joints and Openings in Precast Tunnel Lining Installed Using Tunnel Boring Methods

VSN 212-85: Guidelines for Acceptance, Stockpiling, Storage, and Transportation of Main Building Materials and Products at Outfitting Depots and Outfitting Departments of Construction Organizations Administered by Glavmosstroy

VSN 239-88: Process Guidelines for the Use of Woven and Non-Woven Polymer Filter Membranes for Protection of Below-Grade Portions of Buildings and Structures Against Underflooding by Groundwater

VSN 32-81: Guidelines for hydraulic insulation of structures of bridges and pipes in railway, automobile and city roads

VSN 345-86: Use of Epoxy-Shale Coatings for Waterproofing and Corrosion Protection of Steel Piping and Steel and Reinforced Concrete Structures of Industrial Occupancies and Sewage System Facilities

VSN 362-87: Disinfections and Etching of Pipelines

VSN 454-84: Guidelines for Use of Isol [Rubber-Bitumen Roll Waterproofing Material] for Corrosion Protection for Steel Piping of Piped Heat Distribution Systems

VSN 4-94: Industry-Specific Building Code for Installation of Heating Supply Networks with Pipes Insulated with Cold-Applied Heat-Resistant Bitumen-Rubber Mastic

No related products viewed by other customers

YOUR ORDERING MADE EASY!

RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.

Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.

We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.

Placing Your Order

Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).

Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.

For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.

For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.

Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.

Your Order Best Quality and Authenticity Guarantee

Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).

We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.

We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.

All Codes and Regulations

All Categories

Send us a message Expand Collapse

Leave your message in the form below, and we will write back by e-mail!