GOST 12.2.085-2002

ГОСТ 12.2.085-2002

Vessels working under pressure. Safety valves. Safety requirements

Сосуды, работающие под давлением. Клапаны предохранительные. Требования безопасности

Status: Applied in the EAEU

The standard applies to vessels for various liquid and gaseous media operating under pressure above 0.07 MPa (0.7 kgf

Стандарт распространяется на сосуды для различных жидких и газообразных сред, работающие под давлением свыше 0,07 МПа (0,7 кгс/см2), снабженные предохранительными клапанами, предназначенными для защиты от аварийного повышения давления путем выпуска (сброса) рабочей среды из сосуда через клапан. Стандарт устанавливает общие требования безопасности к выбору, установке и эксплуатации предохранительных клапанов, а также устанавливает порядок расчета пропускной способности предохранительных клапанов. Стандарт не распространяется на сосуды, работающие под вакуумом.

Choose Language: 
Format: Electronic (pdf/doc)
Page Count: 16

Approved: State Committee of the Russian Federation for Standardization and Metrology, 9/19/2002

SKU: RUSS16096

Price: $44.55




The Product is Contained in the Following Classifiers:

Construction (Max) » Standards » Other state standards used in construction » 13 Environmental protection, protection of people from environmental exposure. Security »

Construction (Max) » Standards » Other state standards used in construction » 23 Hydraulic and pneumatic systems and components for general use. »

Evidence base (TR CU, Technical Regulation of the Customs Union) » 010/2011 TR CU. On safety of machinery and equipment » Regulations and standards (to ТР ТС ТС 010/2011) »

Evidence base (TR CU, Technical Regulation of the Customs Union) » 018/2011 TR CU. On safety of wheeled vehicles » Regulations and standards (to 018/2011 TR CU) »

Evidence base (TR CU, Technical Regulation of the Customs Union) » 032/2013 TR CU. On safety of overpressure equipment » Regulations and standards (to 032/2013 TR CU) »

Standards for pipe fittings (TPA) » 8. Piping valves (TPA) design » 8.1 General design issues piping valves (TPA) »

Standards for pipe fittings (TPA) » 8. Piping valves (TPA) design » 8.2 Calculations » 8.2.2 Hydraulic calculations »

Standards for pipe fittings (TPA) » 4. Standards for basic parameters of injection molding machines » 4.2 Shut-off, regulating, check, safety valves »

Standards for pipe fittings (TPA) » 2. Standards for general specifications » 2.4 Safety valves »

PromExpert » SECTION III. LABOR PROTECTION AND SAFETY » III Occupational safety requirements for production equipment and processes » 2 Safety requirements for certain types of work » 2.12 Safety requirements when working with compressors and pressure vessels »

ISO classifier » 23 HYDRAULIC AND PNEUMATIC SYSTEMS AND GENERAL PURPOSE COMPONENTS » 23.020 Storage tanks for liquids and gases » 23.020.30 Pressure vessels, gas cylinders »

National standards » 23 HYDRAULIC AND PNEUMATIC SYSTEMS AND GENERAL PURPOSE COMPONENTS » 23.020 Storage tanks for liquids and gases » 23.020.30 Pressure vessels, gas cylinders »

National Standards for KGS (State Standards Classification) » Latest edition » G Machines, equipment and tools » G4 Machinery and equipment for heavy industry » G47 Machines and equipment for chemical industry »


The Document is Replaced With:

GOST 12.2.085-2017: Pipeline valves. Safety valves. Selection and calculation of capacity

As a Replacement Of:

GOST 12.2.085-82: Vessels working under pressure. Safety valves. Safety requirements

The Document References:

GOST 12.1.007-76: Noxious substances. Classification and general safety requirements

GOST 12.2.063-81: Occupational safety standards system. Industrial pipeline valves. General safety requirements

GOST 12.2.085-82: Vessels working under pressure. Safety valves. Safety requirements

GOST 14249-89: Vessels and apparatus. Norms and methods of strength calculation

GOST 25215-82: High-pressure vessels and apparatus. Shells and heads. Norms and methods of strength calculation

GOST 26303-84: High-pressure vessels and apparatus. Threaded studs. Methods of strength calculation

PB 10-115-96: Regulations of design and safe operation of pressure vessels

ST SEV 5206-85: Vessels and high-pressure apparatus. Flanges, caps flat and convex. Strength analysis methods

The Document is Referenced By:

Decision 88: About the Program for the development (amendment, revision) of interstate standards, the application of which on a voluntary basis ensures compliance with the technical regulations of the Customs Union

GOST 12.2.060-81: Acetylene pipelines

GOST 12.2.063-2015: Pipeline valves. General safety requirements

GOST 12.2.124-2013: Occupational safety standards system. Alimentary product equipment. General safety requirements

GOST 12.2.124-90: The food industry equipment

GOST 12.2.233-2012: Occupational safety standards system. Refrigerating equipment of refrigerating capacity over 3,0 kW. Safety requirements

GOST 12532-88: Direct-acting safety valves. Main parameters

GOST 21561-2017: Automobile tanks for hydrocarbon gas transportation at pressure up to 1,8 MPa. Technical requirements and test methods

GOST 30703-2001: Non-destructive testing. Safety measures for leakage testing. General requirements

GOST 31294-2005: Direct-acting safety valves. General specifications

GOST 31528-2012: Machines and equipment for munufacturing of sugar. Safety requirements

GOST 31529-2012: Machinery and equipment for bread baking industry. Safety requirements

GOST 31598-2012: Steam large sterilizers. General technical requirements and test methods

GOST 31694-2012: Food products, food raw materials. Method of determination of the antibiotic residues of tetracycline group by High performance Liquid Chromatography. Mass spectrometry

GOST 31812-2012: Civil aviation aircraft and helicopter ground support equipment. General technical requirements

GOST 31982-2012: Food products, feeds, food raw materials. Method of determination of b-agonists by Gas chromatography. Mass Spectrometry

GOST 31983-2012: Food products, feeds, food raw materials. Method for determination of polychlorinated biphenyls

GOST 32014-2012: Food products, food raw materials. Method of determination of the nitrofuran mytobolites by high performance liquid chromatography - mass spectrometry (HPLC-MS)

GOST 32015-2012: Food products, feeds, food raw materials. Method of determination of anabolic steroids and stylben derivatives by gas chromatography using mass spectrometry

GOST 32569-2013: Steel pipe technology. Requirements for design and operation of explosive and chemically dangerous production

GOST 32710-2014: Alcoholic beverages and raw materials for its production. Identification. Method for determination of alcohols and sugars 13 C/12C isotopes ratio in wines and mashes

GOST 32797-2014: Food products, food raw materials. Method of determination of the chynolony content by high performance liquid chromatography with mass spectrometry detector

GOST 32798-2014: Food products, food raw materials. Method for determination of the aminoglycosides content by high performance liquid chromatography with mass spectrometry detector

GOST 32834-2014: Food products, food raw materials. Method for determination of the anthelminthic by high performance liquid chromatography - mass spectrometry

GOST 32881-2014: Food products, food raw materials. Method for determination of the non-steroidal anti-inflammatory drug residue content by high performance liquid chromatography – mass spectrometry

GOST 33425-2015: Meat and meat products. Determination of nickel, chromium and cobalt by electrothermal atomic absorption spectrometry

GOST 33426-2015: Meat and meat products. Determination of lead and cadmium by electrothermal atomic absorption spectrometry

GOST 33445-2015: Medical remedies for veterinary use, feed and feed additives. Detection of mass fraction of cobalt by electrothermal atom absorption spectrometric method

GOST 33616-2015: Food products, food raw materials. Method for determination of residues of arsenic containing growth stimulators using high performance liquid chromatography-mass spectrometry with inductively coupled plasma

GOST 33807-2016: Safety of attractions. General requirements

GOST 33971-2016: Food products, food raw materials. Method for determination of the residual content of metabolites of carbadox and olavindox by high-performance liquid chromatography with a mass spectrometric detector

GOST 33978-2016: Food products and mixed feeds. Method for determination of thyreostats by high perfomance liquid chromatografy-mass spectrometry

GOST 34136-2017: Food products, food raw materials. Method for determination of the residual content of macrolides, lincosamides and pleuromutilins by high performance liquid chromatography-mass spectrometry

GOST 34137-2017: Food products, food raw materials. Method for determination of the residual content cephalosporins by high performance liquid chromatography-mass spectrometry

GOST 34139-2017: Food products, food raw materials. Method for the determination of the residual content of sedatives and blockers using high performance liquid chromatography with mass spectrometric detection

GOST 34140-2017: Food products, feed, food raw materials. Method for the determination of mycotoxins using high performance liquid chromatography with mass spectrometric detection

GOST 34141-2017: Food products, feed, food raw materials. Arsenic, Cadmium, Mercury and Lead Detection by Inductively Coupled Plasma Mass Spectrometry

GOST 34249-2017: Feed, feed, feed raw materials. Determination of the mass fraction of chromium by electrothermal atomic absorption spectrometry

GOST 34294-2017: Cryogenic pipeline valves. General specifications

GOST 8339-84: Oil pressure installations for hydraulic turbines

GOST 9544-2015: Pipeline valves. Leakage rates of valves

GOST R 18.12.01-2015: Technology of the aviation fuelling. Functional and technological parameters of airfield fuelling tankers (tankers). Customer requirements

GOST R 18.12.02-2017: Technology of the aviation fueling. Installation of the aviation fuel supply typical schemes.General technical requirements

GOST R 51017-97: Fire engineering. Wheeled fire extinguishers. General technical requirements. Test methods

GOST R 51659-2000: Tank cars of 1520 mm gauge main line railways. General specifications

GOST R 51706-2001: Ozonisation equipment. Safety requirements

GOST R 52264-2004: Pressure diving chambers. General specifications

GOST R 52720-2007: Pipeline valves. Terms and definitions

GOST R 52906-2008: Equipment of the aviation fuelling system. General technical requirements

GOST R 53130-2008: Safety of attractions. General requirements

GOST R 53543-2009: Aircraft and helicopter ground support equipment. General technical requirements

GOST R 53601-2009: Food products, food raw materials. Method of determination of the antibiotic residues of tetracycline group by High Performance Liquid Chromatography. Mass Spectrometry (HPLC-MS)

GOST R 53672-2009: Pipeline valves. General safety requirements

GOST R 53991-2010: Food products, feeds, food raw materials. Method for determination of polychlorinated biphenyls

GOST R 53992-2010: Food products, food raw materials. Method for determination of the nitro furan metobolites residual content by high performance liquid chromatography-mass spectrometry (HPLC-MS)

GOST R 54032-2010: Food products, feeds, food raw materials. Method of determination of beta-agonists by gas chromatography with mass spectrometry detector

GOST R 54035-2010: Food products, feeds, food raw materials. Method of determination of anabolic steroids and stylben derivatives by gas chromatography with mass spectrometry detector

GOST R 54317-2011: Launching and technical complexes of space-rocket complexes. Safety requirements

GOST R 54518-2011: Food products, feeds, food raw materials. Method of the determination of the coccidiastats content by high performance liquid chromatography-mass spectrometry (HPLC-MS)

GOST R 54808-2011: Pipeline valves. Leakage rates of valves.

GOST R 54904-2012: Food products, food raw materials. Method of determination of sulphonamides, nitroimidazoles, penicillins, amphenicols by high performance liquid chromatography - mass spectrometry

GOST R 55018-2012: Pipeline valves for objects of energetics. General specifications

GOST R 55460-2013: Alcoholic production. Identification. Method for determination the relation of isotopes C13/C12 carbon dioxide in sparkling wines and fermentation drinks

GOST R 55508-2013: Pipeline valves. Technique of the experimental definitions hydraulic and cavitation characteristics

GOST R 55892-2013: Objects of low-tonnage liquefied natural gas production and consumption. General technical requirements

GOST R 56001-2014: Pipeline valves for objects of gas industry. General specifications

GOST R 57217-2016: Medical multi-place hyperbaric chambers with operating pressure 1, 0 MPa. General technical requirements

GOST R 57817-2017: Underground gas storage. Design standards

MUK 4.1.1349-03: Gas chromatographic measurement of mass concentrations of chlorocyan (cyanchloride) in the air of the working area

MUK 4.1.1351-03: Measurement of mass concentrations of ethyl alpha cyan alpha ethyl phenylacetate (alpha cyano alpha ethyl phenylacetic acid ethyl ester) in the air of the working zone using gas chromatography

MUK 4.1.1362-03: Gas chromatographic measurement of mass concentrations of 2-methyl-4-oxo-3- (2-propenyl) -cyclopent-2-ene-1-yl-2, 2-dimethyl-3- (2-methylprop-1-enyl) -cyclopropanecarboxylate esbiotrin) in the air of the working area. Methodical instructions

MUK 4.1.1363-03: Gas chromatographic measurement of mass concentrations of 2-methyl-4-oxo-3- (2-propenyl) -cyclopent-2-enyl-2, 2-dimethyl-3- (2-methyl-1-propenyl) -cyclopropane carbonate (etoka) working area. Methodical instructions

MUK 4.1.1621-03: Gas chromatography measuring of mass concentration of hexafluorethane (freon-116) in working zone air

MUK 4.1.1625-03: Gas chromatographic measurement of mass concentrations of decafluorobutane (freon-31-10) in the air of the working area

MUK 4.1.1628-03: Gas chromatographic measurement of mass concentrations of 1, 1-difluoro-1, 2, 2-trichloroethane (freon-122) in the air of the working area

MUK 4.1.1629-03: Measurement of mass concentrations of 1,1-difluoroethylene in working zone area by gas chromatography

MUK 4.1.1634-03: Gas chromatography measuring of mass concentration of pentafluoroiodoethane (freon-R11511) in working zone air

MUK 4.1.1637-03: Gas chromatographic measurement of mass concentrations of (1, 1, 2, 2-tetrafluoroethoxy) methane in the air of the working area

MUK 4.1.1674-03: Measurement of concentration of dimethylamine in water by gas chromatographic method

MUK 4.1.1733-03: Gas chromatographic measurement of mass concentrations of ethyl tert-butyl ether (ETBE) in the air of the working area

MUK 4.1.1930-04: Measurement of mass concentrations of 4-methylphenylene-1,3-diisocyanate (toluenediisocyanate) in workplace air by gas chromatography

MUK 4.1.2102-06: Measurement of the mass concentration of selenium in the urine using atomic absorption spectrometry

MUK 4.1.2144-06: Gas chromatographic determination of 1-methoxypropan-2-ol acetate in ambient air. Methodical instructions

MUK 4.1.2254-07: Measurement of mass concentrations of poly-1, 4beta-O-acetatebutanoate-D-pyranosyl-D-gluconyranose (cellulose acetobutyrate) by the spectrophotometric method in the working area air

MUK 4.1.2256-07: Measurement of mass concentrations of dimethyl sulfoxide (DMSO) in the air of the working area using gas chromatography

MUK 4.1.2257-07: Measurement of mass concentrations of 2- (dimethylamino) ethanol (N, N-dimethylethanolamine), 1, 4-diazabicyclo [2, 2, 2] octane (triethylenediamine) and 2-aminoethanol (ethanolamine) with their joint presence in the air of the working zone by gas chromat

MUK 4.1.2977-12: Measurement of mass concentrations of butan-1-ol (butanol), butylprop-2-enoate (butyl acrylate), methanol, methylprop-2-enoate (methyl acrylate), prop-2-en-1-ala (acrolein), prop-2-enoic (acrylic) acid and ethylprop-2-enoate (ethyl acrylate) in the air of

MUK 4.1.2978-12: Measurement of the mass concentration of 1, 4-diazabicyclo [2, 2, 2] octane (triethylenediamine) in the air of the working area by photometry

MUK 4.1.2979-12: Measurement of the mass concentration of (E) -N- (6, 6-dimethyl-2-hepten-4-ynyl) -N-methyl-1-naphthalenmethanamine hydrochloride (terbinafine hydrochloride, terbinafine, mycoterbin, lamisil) in the air of the working area using spectrophotometry

MUK 4.1.2980-12: Measurement of the mass concentration of magnesium dihydroxide in the air of the working area using spectrophotometry

MUK 4.1.2981-12: Measurement of mass concentration of motherwort dry extract in the air of the working area using spectrophotometry

MUK 4.1.3292-15: Measurement of the mass concentration of a mixture of saturated hydrocarbons (C1-C5) in the atmospheric air of populated areas by gas chromatography with flame ionization detection

MUK 4.1.3293-15: Measurement of the mass concentration of a mixture of marginal normal hydrocarbons (C6-C10) in the atmospheric air of populated areas by gas chromatography with flame ionization detection

MUK 4.1.3482-17: Measurement of the mass concentration of vitamin K1 in serum by high performance liquid chromatography (HPLC)

OIT-0013-2000: Nomenclature of equipment, products and technologies for nuclear installations, radiation sources and storage facilities, subject to mandatory certification in the System of certification of equipment, products and technologies for nuclear installations,

Order 498: List of questions proposed in the qualification examination for certification of experts in the field of industrial safety

OST 26.260.18-2004: Process modules for oil and gas industry. General technical specifications

OST 26-04-280-93: Pipeline fittings of cryogenic equipment products. General specifications.

PB 09-322-99: Safety Requirements for Production, Storage, Transportation, and Use of Chlorine

PNST 166-2016: Safety class 4 pipeline valves for technological systems of nuclear stations. General technical requirements

PNST 248-2017: On-board cryogenic tanks for locomotives on liquefied natural gas. General specifications

POT R M-003-97: Intersectoral rules on labor protection when performing forging and pressing

POT R M-015-2000: Intersectoral labor protection regulations for the operation of freon refrigeration units

RD 03-29-93: Instructional Guidelines For Engineering Certification of Steam and Hot-Water Boilers, Pressure Vessels, Steam and Hot-Water Pipelines

RD 24.200.11-90: Pressure-operated vessels and devices. Safety rules and standards during hydro-proof and leak-proof testing operations.

RD 26.260.010-2002: The leading document on standardization. The list of standard documentation on standardization on the cells and devices working under pressure.

RD 26-07-262-86: Guidelines. The method of calculation of full-lift safety valves with medium flow under the valve

SA 03-005-07: Industrial pipelines of oil-refining, petrochemical and chemical industry. Requirements to configuration and operation

SP 162.1330610.2014: Safety requirements for production, storage, transportation and use of liquid hydrogen

SP 42-101-2003: The general provision and construction gas distribution sistem from steel and polyethyelene pipes

ST TsKBA 003-2003: Pipe fittings. Enclosures and covers. Rationing static strength

ST TsKBA 011-2004: Pipe fittings. Terms and Definitions

ST TsKBA 029-2006: Pipe fittings. Methods of experimental determination of hydraulic and cavitation characteristics

TU 3113-028-00220302-01: Heaters of steam and water-to-water for heating networks of heating and hot water systems. Technical conditions

TU 3612-023-00220302-01: Shell-and-tube heat exchangers with a floating head, shell-and-tube with U-tubes and tube bundles for them

TU 3612-024-00220302-02: Shell and tube heat exchangers with fixed tube sheets and shell and tube with temperature compensator on the shell

TU 3612-100-00220302-2005: Shell and tube heat exchangers, tube bundles for them and heat exchangers "pipe in pipe". General technical conditions

TU 3615-018-00217320-2006: Spherical tanks. Technical specifications

TU 3615-132-00220302-2008: Ball tanks for liquefied petroleum gases. Specifications

VNP-10041-2002: Departmental norms and rules for creating coastal fishing enterprises. Treatment facilities

Customers Who Viewed This Item Also Viewed:

Rules of Electrical Installations Design (Russian Electrical Code). 7th Edition. All sections and exhibits
Language: English
Price: $478.76
Foundation bolts. Structure and dimensions
Language: English
Price: $198.99
Pipeline valves. Leakage rates of valves
Language: English
Price: $173.25
Steel welded vessels and apparatus. General technical conditions
Language: English
Price: $108.90
Flanges for valves, fittings and pipelines for pressure to PN 250. Design, dimensions and general technical requirements
Language: English
Price: $293.04
Stainless steels and corrosion resisting, heat-resisting and creep resisting alloys. Grades
Language: English
Price: $212.85
State system for ensuring the uniformity of measurements. Verification of testing equipment. General principles
Language: English
Price: $121.77
Billet of rotor shafts and rings of turbine generators
Language: English
Price: $1,487.33
Steel building structures. General specifications
Language: English
Price: $250.17
Fencing constructions for translucent buildings and structures. Design rules
Language: English
Price: $609.15
Electromagnetic compatibility of multimedia equipment. Emission requirements
Language: English
Price: $974.64
Non-destructive testing. Method of magnetic particle testing. Standard technological processes
Language: English
Price: $292.05
Supports for Cylindrical and Conical Upright Apparatus. Types and Basic Parameters
Language: English
Price: $573.20
Steel structures
Language: English
Price: $297.00
Hot-rolled sheet. Range
Language: English
Price: $72.27
Obosnovanie bezopasnosti oborudovaniya. Rekomendatsii po podgotovke
Language: English
Price: $67.32
Reinforcing rolled products for reinforced concrete constructions. Specifications
Language: English
Price: $298.98
Tests on electric and optical cables under fire conditions. Part 3-22. Flame spread of vertically-mounted bunched wires or cables. Category A
Language: English
Price: $102.96
Unified system for design documentation. Exploitative documents
Language: English
Price: $150.48
Hexagon head bolts. Product grades A and B
Language: English
Price: $203.94

YOUR ORDERING MADE EASY!

RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.

Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.

We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.

Placing Your Order

Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).

Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.

For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.

For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.

Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.

Your Order Best Quality and Authenticity Guarantee

Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).

We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.

We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.

All Codes and Regulations

All Categories

Send us a message Expand Collapse

Leave your message in the form below, and we will write back by e-mail!