GOST 12.3.002-75

ГОСТ 12.3.002-75

Occupational safety standards system. Manufacturing processes. General safety requirements

Система стандартов безопасности труда Процессы производственные Общие требования безопасности

Status: Not effective - Superseded. Registration information 1368-st dated 09/23/2015 (the official website of Rosstandart); (IUS 5-2016)

The standard establishes general safety requirements for production processes, as well as requirements for the construction and maintenance of standards of the Occupational Safety Standards System for groups of production processes.

Стандарт устанавливает общие требования безопасности к производственным процессам, а также требования к построению и содержанию стандартов Системы стандартов безопасности труда на группы производственных процессов.

Choose Language: 
Format: Electronic (pdf/doc)
Page Count: 12

Approved: State Committee of Standards of the Council of Ministers of the USSR, 4/25/1975

SKU: RUSS16097

Price: $67.32




The Product is Contained in the Following Classifiers:

Construction (Max) » Standards » Other state standards used in construction » 13 Environmental protection, protection of people from environmental exposure. Security »

PromExpert » SECTION III. LABOR PROTECTION AND SAFETY » III Occupational safety requirements for production equipment and processes » 2 Safety requirements for certain types of work » 2.3 Safety requirements of production processes »

ISO classifier » 13 ENVIRONMENTAL PROTECTION, HUMAN PROTECTION AGAINST ENVIRONMENTAL IMPACT. SECURITY » 13.100 Safety of professional activity. Industrial hygiene »

National standards » 13 ENVIRONMENTAL PROTECTION, HUMAN PROTECTION AGAINST ENVIRONMENTAL IMPACT. SECURITY » 13.100 Safety of professional activity. Industrial hygiene »

National Standards for KGS (State Standards Classification) » Latest edition » T General technical and organizational and methodological standards » T5 Documentation System » T58 System of standards infield of nature conservation and improvement of use of natural resources, labor safety, scientific organization of labor »

National Standards for OKSTU » SYSTEMS OF GENERAL TECHNICAL AND ORGANIZATIONAL-METHODOLOGICAL STANDARDS » Occupational safety standards system (SSBT). Scientific organization of labor. Safety precautions. Sanitation and occupational health »


The Document is Replaced With:

GOST 12.3.002-2014: System of labor safety standards Production processes. General safety requirements.

The Document References:

GOST 12.0.001-82: Occupational safety standards system. Basic rules

GOST 12.0.004-90: Organization of training for labor safety. General rules

GOST 12.1.004-91: Fire safety. General requirements

GOST 12.1.010-76: Explosion safety. General requirements

GOST 12.2.003-91: Industrial equipment. General safety requirements

GOST 12.2.058-81: Requirements for color of crane components dangerous in exploitation

GOST 12.4.009-83: Fire-fighting equipment for protection of units. Basic types. Location and maintenance

GOST 12.4.026-76: Signal colors and safety signs

GOST 3.1120-83: Unified system of technological documentation. General rules for presentation of labour safety requirements in technological documentation

GOST R 12.4.026-2001: Occupational safety standards system. Safety colors, safety signs and signal marking. Purpose and rules of application. General technical requirements and characteristics. Test methods

SNiP 2.01.02-85: Fire-prevention standards

The Document is Referenced By:

GKINP 15-236-91: Instructions for printing processes in kartoizdaniya

GOST 10141-91: Rod and ball mills

GOST 10297-94: Indium. Specifications

GOST 10700-97: Waste paper and board. Specifications

GOST 10772-78: Antipenetration water-based washes

GOST 10791-2004: All-rolled wheels. Specifications

GOST 10921-90: Radial and axial fans. Aerodynamic testing methods

GOST 10950-2013: Coniferous sawn timber. Antiseptic surface treatment

GOST 10982-75: Write enamel ЭП-148 for refrigerators and other electrodomestic devices. Specifications

GOST 11018-2000: Traction railway stock for 1520 mm gauge railways. Wheel sets. General specifications

GOST 11018-2011: Traction railway stock wheelsets of 1520 mm gauge railways. General specifications

GOST 11107-90: Artificial leather T, haberdashery. General specifications

GOST 11142-78: Plate boxes for personal defense means. Specifications

GOST 11368-89: Wood moulding compounds. Specifications

GOST 12.1.005-76: Occupational safety standards system. Working zone air. General hygiene requirements

GOST 12.1.008-76: Occupational safety standards system. Biological safety. General requirements

GOST 12.1.031-81: Occupational safety standards system. Lasers. Methods of dosimetrical control of laser radiation

GOST 12.1.040-83: Occupational safety standards system. Laser safety. General

GOST 12.1.041-83: Fire and explosion safety of combustible dusts

GOST 12.2.002-91: Occupational safety standards system. Agricultural machinery. Methods of safety evaluation.

GOST 12.2.042-2013: Occupational safety standards system. Machines and technological equipment for live-stock-raising and forage production. General safety requirements

GOST 12.2.042-91: Occupational safety standards system. Machines and technological equipment for livestock raising and forage production.

GOST 12.2.084-93: Occupational safety standards system. Machines and equipment for laundries and dry-cleaning enterprises. General safety requirements

GOST 12.2.086-83: Positive displacement hydraulic drives and lubrication systems

GOST 12.2.102-2013: Occupational safety standards system. Machines and equipment for timber logging and floating. Safety requirements, control methods for safety requirements and evaluation of labour safety

GOST 12.3.001-85: System of labor safety standards pneumatic drives

GOST 12.3.003-75: Occupational safety standards system Electric welding works. Safety requirements

GOST 12.3.003-86: Occupational safety standards system Electric welding works. Safety requirements

GOST 12.3.004-75: Occupational safety standards system. Heat treatment of metals. General safety requirements

GOST 12.3.005-75: Painting works

GOST 12.3.006-75: Occupational safety standards system. Operation of water supply and sewerage systems. General safety requirements

GOST 12.3.007-75: Occupational safety standards system. Woodworking. General safety requirements

GOST 12.3.008-75: Production of metallic and non-metallic inorganic coatings

GOST 12.3.009-76: Occupational safety standards system. Loading and unloading works General safety requirements

GOST 12.3.010-76: Occupational safety standards system. Industrial packing. Safety requirements under operation

GOST 12.3.010-82: Occupational safety standards system. Industrial packing. Safety requirements under operation

GOST 12.3.011-77: Occupational safety standards system. Sawmilling. Safety requirements

GOST 12.3.013-77: Occupational safety standards system. Type-writing works. General safety requirements

GOST 12.3.014-90: Occupational safety standards system. Manufacture of pressed wood shaving plates. General safety requirement

GOST 12.3.015-78: Occupational safety standards system. Logging operations. Safety requirements

GOST 12.3.016-87: Occupational safety standards system. Building construction anticorrosive protective works. Safety requirements

GOST 12.3.017-79: Occupational safety standards system. Automobile maintenance and service. General safety requirements

GOST 12.3.019-80: Occupational safety standards system. Electrical tests and measurements. General safety requirements

GOST 12.3.020-80: Occupational safety standards system. Transporting process of loads in all fields of national economy. General requirements safety

GOST 12.3.026-81: Occupational safety standards system. Forge-pressing. Safety requirements

GOST 12.3.027-2004: Foundry work. Safety requirements

GOST 12.3.027-81: Occupational safety standards system. Foundry work. Safety requirements

GOST 12.3.027-92: Foundry work

GOST 12.3.029-82: Occupational safety standards system. Handling operations in the sea. Safety requirements

GOST 12.3.030-83: Occupation safety standards system. Safety requirements. Plastics processing

GOST 12.3.031-83: Occupational safety standards system. Work with mercury. Safety requirements

GOST 12.3.032-84: Occupational safety standards system. Electric installation works. General safety requirements

GOST 12.3.034-84: Occupational safety standards system. Wood protection works. General safety requirements

GOST 12.3.035-84: Construction. Painting. Safety requirements

GOST 12.3.036-84: Occupational safety standards system. Flame machining of metals. Safety requirements

GOST 12.3.037-84: Occupational safety standards system. Use of fertilizers in agriculture and forestry. General safety requirements

GOST 12.3.038-85: Occupational safety standards system. Construction. Works on thermal instulation of equipment and pipe lines. Safety requirements

GOST 12.3.040-86: Occupational safety standards system. Construction. Roofing and water proofing. Safety requirements

GOST 12.3.041-86: Occupational safety standards system. Use of pesticides for plant protection. Safety requirements

GOST 12.3.042-88: Occupational safety standards system. Woodworking manufacture. General safety requirements

GOST 12.3.043-90: Occupational safety standards system. Industrial technologies of optical coating application on pieces. General safety requirements

GOST 12367-85: Tube mills of grinding units. General technical specifications

GOST 1293.0-83: Lead-antimony alloys. General requirements for methods of chemical analysis

GOST 13.1.120-99: Reprography. Micrography. Microforms with vesicular films. General technical requirements and methods of control

GOST 13.1.305-93: Reprography. Micrography. Diazotype films. General specifications

GOST 13047.1-2002: Nickel. Cobalt. General requirements for methods of analysis

GOST 13047.1-2014: Nickel. Cobalt. General requirements for methods of analysis

GOST 13354-91: Gated wooden patterns. Specifications

GOST 13448-82: Plastic ventilation grilles. Technical conditions

GOST 1467-93: Cadmium. Specifications

GOST 14782-86: Nondestructive testing. Welded joints. Ultrasonic methods

GOST 14923-78: Enamels ПФ-223. Specifications

GOST 14940-96: Bleached sulphate pulp made of deciduous (aspen) wood. Specifications

GOST 16295-82: Packing anticorrosive paper. Specifications

GOST 16295-93: Anticorrosion paper

GOST 16446-2012: Dry complement for the complement fixation test. Specification

GOST 16763-79: Zink chromate. Specifications

GOST 17108-86: Positive-displacement hydraulic drive and lubricating systems. Methods of parameters measurement

GOST 17262.1-78: Cadmium. Method of spectral for the determination of copper, nickel, lead and thallium

GOST 17366-80: Welded thick-walled steel barrels for chemical products

GOST 17493-80: Electric machine frequency converters with power rating 250 kw up

GOST 17607-72: Nickel soured. Technical conditions

GOST 17772-88: Semiconducting photoelectric detectors and receiving photoelectric devices. Methods of measuring photoelectric parameters and determining characteristics

GOST 18099-78: Enamels ML-152. Specifications

GOST 18176-79: Furniture of packing cases. Specifications

GOST 18188-72: Solvents of grades 645, 646, 647, 648 for paint materials. Specifications

GOST 18374-79: Enamels XB-110 and XB-113. Specifications

GOST 18442-80: Non-destructive testing. Capillary methods. General requirements

GOST 18576-85: Non-destructive testing. Railway rails. Ultrasonic control methods

GOST 18576-96: Non-destructive testing. Railway rails. Ultrasonic testing methods

GOST 18620-86: Electrotechnical articles

GOST 18896-73: Steel thick-walled drums for chemical products. Specifications

GOST 19024-79: Enamels AC-182. Specifications

GOST 19674-74: Cadmium high purity. Method for the determination of mercury content

GOST 19862-87: Pneumatic drives. Methods of measuring parameters

GOST 20054-2016: Concrete non-pressure pipes. Specifications

GOST 20073-81: General-purpose stationary air piston compressors. Acceptance rules and methods of tests

GOST 202-84: Zinc white

GOST 20580.0-80: Lead. General requirements for methods of chemical analysis

GOST 20793-2009: Agricultural tractors and machines. Maintenance

GOST 21105-87: Non-destructive testing. Method of magnetic particle testing

GOST 21399-75: Transport packs of non-ferrous metal pigs, cathodes and ingots. General requirements

GOST 21751-76: Sealants. Determination method of tensile strength, ultimate elongation at break and deformation set after break

GOST 21929-76: Transportation of goods in packages. General requirements

GOST 21981-76: Sealants. Determination method of bond strength with metal at peeling

GOST 22133-86: Paint and varnish coatings of metal-cutting, press-forging, foundry and wood-working equipment

GOST 22161-76: Marine machines, mechanisms, steam boilers, vessels, apparatus. Norms and rules of hydraulic and air testing

GOST 22637-77: Corrugated fibreboard boxes for electronic components. Specifications

GOST 22860-93: Cadmium of high purity. Specifications

GOST 22861-93: Lead of high purity. Specifications

GOST 22896-77: Paint coatings for electric locomotives of 1520 mm gauge main line railways. Specifications

GOST 22947-78: Paint coatings for diesel locomotives of 1520 mm gauge main line railways. Specifications

GOST 23050-2012: Virus vaccine against Aujeszky disease cultural dry. Specification

GOST 23116.0-83: Cadmium of high purity. General requirements for methods of spectral analysis

GOST 23367-86: Upholstery vinyl artificial leather. General specifications

GOST 23438-79: Varnishes of type ПЭ-232, ПЭ-250, ПЭ-250М, ПЭ-250ПМ. Specifications

GOST 23494-79: Primer XC-059, enamels XC-759, varnish XC-724. Specifications

GOST 23543-88: Geodesic instruments

GOST 23691-79: Joints of tubes with tube-plates and collectors of heat exchangers. Compression of tubes by sources of impulse pressure. General

GOST 23692-79: Joints of tubes with tube-plates and collectors of heat exchangers. Requirements for typical technology of making tube to tube-plate joints by means of leads electrical explosion energy

GOST 23693-79: Joints of tubes with tube-plates and collectors of heat exchangers. Requirements for typical technology of making tube to tube-plate joints by means of explosion energy of explosives

GOST 23745-2014: Product for reproduction. Fresh non-diluted sperm of bulls. Specifications

GOST 23760-79: Enamels MЧ-145. Specifications

GOST 24028-2013: Internal combustion reciprocating engines. Visible pollutants. Limit values and test methods

GOST 24028-80: Marine, locomotive and industrial diesel engines. Exhaust smoke opacity. Standard values and testing methods

GOST 24329-80: Modified wood. Modification methods

GOST 24507-80: Non-destructive testing. Forgings from ferrous and non-ferrous metals. Ultrasonic methods of slow defection

GOST 24585-81: Marine, locomotive and commercial diesels. Emission of harmful substances with exhaust gases. Permissible values and measurement methods

GOST 24714-81: Lasers. The measurement methods of radiation parameters. General rules

GOST 24784-81: Enamels ПФ-188. Specifications

GOST 24897-81: Solid magnetic deformed materials. Marks

GOST 25573-82: Freight handling rope slings for construction

GOST 25646-95: Service of building machines. General requirements

GOST 26030-2015: Product for reproduction. Frozen semen of bulls. Specifications

GOST 26093-84: Ceramic insulators. Test methods

GOST 26182-84: Non-destructive testing. Fluorescent method of leak testing

GOST 263-75: Rubber. Method for the determination of Shore A hardness

GOST 26501-85: Marine ship hulls. General requirements for electrochemical protection

GOST 26548-85: Air heaters. Methods of tests

GOST 26646-90: Stationary distillation desalinization units

GOST 267-73: Rubber. Methods for the determination of density

GOST 26910-86: Antiseptic water-proof compounds for protection of timber butt-ends. Specifications

GOST 26957-97: Variators with wide-angle belt pulleys. General specifications

GOST 26991-86: Optical connectors. Requirements for technological process

GOST 27750-88: Restoring coatings. Coating thickness control methods

GOST 27819-88: Fresh apples. Cold storage

GOST 27981.0-88: Copper of high purity. General requirements for methods analysis

GOST 28143-89: Vinyl artificial leather for footwear. Type NT. General specifications

GOST 28144-89: Synthetic leather on non-woven sheet for footwear uppers. General specifications

GOST 28275-94: Fresh food garden carrots. Guide to storage

GOST 28302-89: Thermal sprayed protective coatings from zinc and aluminium metallic construction. General requirements for a typical technological process

GOST 28323-89: Apron feeders

GOST 28346-89: Fresh table grapes. Cold storage

GOST 28372-93: Fresh food potatoes. Guide to storage

GOST 28373-94: Round-headed and Savoy cabbage. Guide to storage

GOST 28424-2014: Product for reproduction. Bovine embryos. Specifications

GOST 28426-90: Thermo diffusion strengthening and protection of metal products. General requirements for technological process

GOST 28461-90: Artificial leather for garments. General specifications

GOST 28812-90: Coke chemical pyridine-base products. Gas chromatographic method for determination of component composition

GOST 29151-91: RVC-coated tarpaulins for automobile transport. General specifications

GOST 29181-91: Fresh table grapes. Storage in controlled atmosphere refrigerating chambers

GOST 3.1120-83: Unified system of technological documentation. General rules for presentation of labour safety requirements in technological documentation

GOST 30222-95: Cone variable speed drives. General specifications

GOST 30223-95: Motorised conveyor drums. General specifications

GOST 30246-2016: Rolled thin-walled metal sheet with protective and decorative paintwork for building structures. Specification

GOST 30246-94: Continuously rolled sheet steel with paint coating for Building

GOST 30276-95: Textile synthetic filter materials for sugar industry. General specifications

GOST 30277-95: Synthetic bulky fabrics for technical use. General specifications

GOST 30357-96: Carbons cation exchangers. Specifications

GOST 30430-96: Arc welding of structural cast irons. Requirements for technological process

GOST 30443-97: Technological faundry equipment. Methods of control and estimation of safety

GOST 30620-98: Aluminium piston alloys. Specifications

GOST 30703-2001: Non-destructive testing. Safety measures for leakage testing. General requirements

GOST 30803-2002: Transmission tooth gears of the traction main railway stock . Specifications

GOST 30884-2003: Ready-mixed oil paints. General specifications

GOST 31089-2003: Household solvents (diluents) for paint coating materials. General specifications

GOST 31093-2003: Paints and varnishes for furniture. General specifications

GOST 31244-2004: Non-destructive testing. Evaluation of material physical and mechanical properties for technical system elements by acoustic method. General requirements

GOST 31334-2007: Axles for rolling stock of 1520 mm gauge railways. Specifications

GOST 31343-2007: Machines and equipment for processing and decontamination of a fluid manure. Test methods

GOST 31344-2007: Machines and equipment for removing the manure. Test methods

GOST 31346-2007: Instаllation for processing of dung. Test methods

GOST 31384-2008: Structural concrete protection against corrosion. General requirements

GOST 31448-2012: Steel pipes with defensive covering for main gas and oil pipelines. Specifications

GOST 31461-2012: Poultry dung. Raw material for manufacture of organic fertilizers. Specifications

GOST 31537-2012: Wheelset assembly for locomotives and motor-powered units using shrink fit method. Typical technological process

GOST 31581-2012: Laser safety. General safety requirements for development and operation of laser products

GOST 31591-2012: Gearmotors of general purposes. General specifications

GOST 31656-2012: Food additives. Food potassium lactate Е326. Specifications

GOST 31809-2012: Hurient stillage. Specifications

GOST 31835-2012: Well sucker-rod pumps. General technical requirements

GOST 31895-2012: White sugar. Specifications

GOST 31905-2012: Food additives. Calcium lactate Е327. Specifications

GOST 31927-2012: Live vaccine against salmonellosis of animals. General specifications

GOST 32085-2013: Chemical (synthetic) fibres. Safety requirements

GOST 32210-2013: Emission of the exhaust gas pollutants by the main-line and shunting of the special-purpose railway rolling stock. Norms and determination methods

GOST 32220-2013: Drinking bottled water. General specifications

GOST 32279-2013: Iron ores, concentrates, agglomerates and pellets. Method for determination of hygroscopic water content

GOST 32345-2013: Coals of Yakutia for power supply and technological purposes. Specification

GOST 32346-2013: Sakhalin coals for power supply and technological purposes. Specifications

GOST 32347-2013: Hard coal and anthracites of Kuznetsk and Gorlovsky basins for power supply purposes. Specifications

GOST 32348-2013: Hard coals and anthracites of Kuznetsk and Gorlovsky basins for cement and lime furnaces and production of brick. Specifications

GOST 32349-2013: Hard coals and anthracites of Kuznets and Gorlovsky basins of technological purposes. Specification

GOST 32351-2013: Chelyabinsk Basin coals for pulverized, stratified burning and domestic needs. Specifications

GOST 32354-2013: Coals of Far East for power supply purposes. Specification

GOST 32355-2013: Coals of the Far East for cement and lime furnaces and production of brick. Specification

GOST 32389-2013: Boiled oils. General specifications

GOST 32517.1-2013: Iron ores, concentrates, agglomerates and pellets. Methods for the determination of total iron

GOST 32518.1-2013: Iron ores, concentrates, agglomerates and pellets. Determination of silica gravimetric method

GOST 32518.2-2013: Iron ores, concentrates, agglomerates and pellets. Determination of silica spectrophotometric method

GOST 32520-2013: Iron ores, concentrates, agglomerates and pellets. General requirements to the methods of chemical analyses

GOST 32530-2013: Glass and glass products. Marking, packing, transportation, storage

GOST 32599.1-2013: Iron ores, concentrates, agglomerates and pellets. Determination of sulfur content. Barium sulfate gravimetric method

GOST 32599.2-2013: Iron ores, concentrates, agglomerates and pellets. Determination of sulfur content. Combustion/titration c method

GOST 32662-2014: Polymer composite components of the ventilating equipment. Specifications

GOST 32663-2014: Polymer composite components of the pumps for special purpose. Specifications

GOST 32732-2014: Medicine remedies for veterinary use. Vaccines against emfizematoze carbuncle of cattle and sheep. Specifications

GOST 32808-2014: Medicine remedies for veterinary use. Vaccines against brucellose of animals. Specifications

GOST 32829-2014: Automobile roads of general use. Road marking materials. Methods of testing

GOST 32870-2014: Automobile roads of general use. Bituminous mastics. Technical requirements

GOST 32893-2014: Perfumery and cosmetics. Methods of evaluation of toxicological and clinical safety indices

GOST 32991-2014: Pechora basin coals for power technology goals. Specifications.

GOST 3302-95: Rubber ice-bags. Specification

GOST 3303-94: Rabber hot-water bottles. Specifications

GOST 33164.1-2014: Mining equipment. Longwall powered roof shocks. Section of support. General specifications

GOST 33164.3-2014: Mining and tunneling equipment. Timbering, mechanized. Hydraulic control systems. Safety requirements and methods of testing

GOST 33222-2015: White sugar. Specifications

GOST 33262-2015: Medicine remedies for veterinary use. Vaccine against cattle trichophytosis «LTF-130». Specifications

GOST 33275-2015: Biological medicine remedies for veterinary use. Vaccines fowl pox. Specifications

GOST 33280-2015: Medicine remedies for veterinary use. Vaccine against leptospirosis of animals. Specifications

GOST 33290-2015: Paint materials used in building. General specifications

GOST 33354-2015: Paint materials being in contact with food products. General specifications

GOST 33380-2015: Organic fertilizers. Effluent. Specifications

GOST 33459-2015: Medicine remedies for veterinary use. Vaccines against dermatophytosis of animals. General specification

GOST 33504-2015: Food additives. Dihydroquercetin. Specifications

GOST 33565-2015: Materials used for the preparation and treatment of water-based drilling fluids. Input control

GOST 33596-2015: Electric heating devices for heating rolling stock railways. Safety requirements and test methods

GOST 33726-2016: Static non-tractive converters for railway rolling stock. General specifications

GOST 33754-2016: Emissions of harmful substances and smoke of exhaust gases of autonomous traction and motor rolling stock. Norms and determination methods

GOST 33757-2016: Flat wooden pallets. Specification

GOST 33826-2016: Product for reproduction. Sperm of boars frozen. Specification

GOST 33827-2016: Products for reproduction. Fresh-received diluted boar’s semen. Specifications

GOST 33885-2016: Passenger cars on locomotive traction. Test methods of sanitary-hygienic and ecological indicators

GOST 34028-2016: Reinforcing rolled products for reinforced concrete constructions. Specifications

GOST 34058-2017: Internal buildings and structures utilities. Mounting and start-up adaptive control of air-conditioning evaporative and condensing units. General technical requirements

GOST 3778-77: Lead. Specifications

GOST 3778-98: Lead. Specifications

GOST 3864-75: 22% Mastic. Specifications

GOST 478-80: Lead chromate pigments

GOST 4835-2006: Car wheelsets of 1520 mm gauge mainline railways. Specifications

GOST 4835-2013: Wheelsets for freight and passenger car. Technical specifications

GOST 490-79: Lactic acid for use in foodstuffs. Specifications

GOST 4976-83: Furniture lacquers НЦ-218, НЦ-222, НЦ-243 and НЦ-223. Specifications

GOST 5006-83: Toothed clutches. Specifications

GOST 5044-79: Thin-walled steel drums for chemical products

GOST 5406-84: Enamels НЦ-25. Specifications

GOST 5971-78: Enamels for instruments. Specifications

GOST 6012-2011: Nickel. Methods of the chemical and atomic emission spectrographic analysis.

GOST 6012-78: Nickel. Methods of chemical-atomic-emission spectral analysis

GOST 6012-98: Nickel. Methods of chemical-atomic-emission spectral analysis

GOST 6482-2011: Ferroconcrete nonpressure pipes. Technical specifications.

GOST 6937-81: Conic crushers. Specification

GOST 6937-91: Conic crushers

GOST 6993-79: Enamels HV-1100. Specification

GOST 7122-81: Weld seams and all-weld metal. Methods of sample selection for determination of chemical composition

GOST 7313-75: Enamels ХВ-785 and lacquer XB-784. Specifications

GOST 7409-90: Main line freight cars for 1520 mm gauge. Specifications for the development of paint coating technologies

GOST 7524-2015: Steel grinding balls for ball mills. Specifications.

GOST 765-85: Anchor shackles. Specifications

GOST 7751-2009: Agriculture machinery. Regulations of storage

GOST 7751-85: Technique used in agriculture. Regulations of storage

GOST 7827-74: Solvents of grades P-4, P-4A, P-5, P-5A, P-12 for paint materials. Specifications

GOST 8.548-86: State system for ensuring the uniformity of measurements. Clock-type dial indicators graduated in unit divisions of 0,01mm. Procedure of verification

GOST 8776-2010: Cobalt. Methods of chemical-atomic-emission spectral analysis

GOST 8776-79: Cobalt. Methods of chemical-atomic-emission spectral analysis

GOST 8776-99: Cobalt. Methods of chemical-atomic-emission spectral analysis

GOST 9.014-78: Unified system of corrosion and ageing protection. Temporary corrosion protection of products. General requirements

GOST 9.024-74: Unified system of corrosion and ageing protection. Rubbers. Methods of heat ageing stability determination

GOST 9.026-74: Unified system of corrosion and ageing protection. Vulcanized rubber. Method of accelerated determination to ozone and thermolightozone resistance

GOST 9.030-74: Unified system of corrosion and ageing protection. Vulcanized rubbers. Method of testing resistance to attack by corrosive media in limp state

GOST 9.068-76: Unified system of corrosion and ageing protection. Sealants. Test methods for resistance to attack by liquid corrosive media

GOST 9.070-76: Unified system of corrosion and ageing protection. Vulcanized rubbers. Test methods for resistance to attack by liquid corrosive media at static compressive strain

GOST 9.402-2004: Unified system of corrosion and ageing protection. Paint coatings. Metal surface preparation for painting

GOST 9.704-80: Unified system of corrosion and ageing protection. Vulcanized rubbers. Methods of determination of the packing parts for the fixed joints working capacity during the radiation-thermal ageing

GOST 9.712-86: Unified system of corrosion and ageing protection. Adhesives. Test methods of adhesive bonds of rubber with rubber-fabric materials and metals for resistance to the influence of liquid aggressive media

GOST 9.715-86: Unified system of corrosion and ageing protection. Polymeric materials. Test methods for temperature shock resistance

GOST 9.716-91: Unified system of corrosion and ageing protection. Polymeric materials. Methods of determining variation of plasticizer content with ageing

GOST 9.717-91: Unified system of corrosion and ageing protection. Polymeric materials. Method of determining the mass portion of chemically and physically bound water

GOST 9.718-93: Unified system of corrosion and ageing protection. Polymeric materials. Antioxidant protective efficiency determining method

GOST 9.719-94: Unified system of corrosion and ageing protection. Polymeric materials. Methods of ageing tests under the influence of moist heat, aqueous and salt spray

GOST 9.906-83: Unified system of corrosion and ageing protection. Test climatic stations. General requirements

GOST 9014.3-2013: Road timber. Chemical preservation by spraying at storage

GOST 9014.3-81: Round timber. Chemical preservation by spraying at storage

GOST 9078-84: Flat pallets

GOST 9109-81: Primers ФЛ-03k and ФЛ-03Ж. Specifications

GOST 9128-2009: Asphaltic concrete mixtures for roads and aerodromes and asphaltic concrete. Specifications

GOST 9128-2013: Asphaltic concrete and polymer asphaltic concrete mixtures, asphaltic concrete and polymer asphaltic concrete for roads and aerodromes. Specifications

GOST 9198-83: Enamels of types НЦ-11 and НЦ-11А. Specifications

GOST 926-82: Enamels ПФ-133. Specifications

GOST 9286-2012: Technical pentaerythritol. Specifications

GOST 9355-81: Primer HS-010. Enamel HS-710. Lacquer HS-76. Specification

GOST 9519.0-82: Lead-calcium bearing alloys. General requirements for methods of spectral analysis

GOST 9569-79: Paraffin paper

GOST 9570-84: Box and post pallets

GOST 9982-76: Rubber. Determination of stress relaxation in compression

GOST R 12.1.031-2010: Occupational safety standards system. Lasers. Methods of dosimetric control of laser radiation

GOST R 22.9.29-2015: Safety in emergencies. Emergency and rescue vehicles. Test methods

GOST R 50357-92: Ultramarines for paints. General specifications

GOST R 50522-93: Table grapes. Guide to cold storage

GOST R 50528-93: Fresh apples. Storage in controlled atmospheres

GOST R 50552-93: Industrial purity. Filtering materials. Specifications

GOST R 50599-93: Welded steel vessels and apparatus under high pressure. Non-destructive control while the manufacturing and operating

GOST R 50714-94: Artificial leather for personal safety facilities. General specifications

GOST R 50723-94: Laser safety. General requirements for development and operation the laser products

GOST R 50892-96: Elastic couplings with a toroid-shape shell. Specifications

GOST R 50894-96: Star elastic clutches. Specifications

GOST R 50895-96: Toothed clutches. Specifications

GOST R 50908-96: Small tractors, powered blocks and motor cultivators. Method for estimation of safety

GOST R 50953-2008: Emission of the exhaust gas pollutants by the main-line and shunting diesel locomotives. Norms and determination methods

GOST R 50953-96: Emission of the exhaust gas pollutants by the main line and shunting diesel locomotives. Norms and determination methods

GOST R 50968-96: Gearmotors of general purpose. General standard specifications

GOST R 51110-97: Equipment for bank protection. General technical requirements

GOST R 51111-97: Equipment for bank protection. Acceptance rules and test methods

GOST R 51175-98: Transmission tooth gears of the traction main railway stock. Specifications

GOST R 51249-99: Internal combustion reciprocating engines. Emissions of harmful substances with the exhaust gases. Limit values and test methods

GOST R 51250-99: Internal combustion reciprocating engines. Visible pollutants. Limit values and test methods

GOST R 51304-99: Services of retailing. General requirements

GOST R 51586-2000: Brown coals, hard coal and anthracites of Kuznetsk and Gorlovsky basins for power supply purposes. Specifications

GOST R 51587-2000: Hard coal anthracites of Kuznetsk and Gorlovsky basins for cement and lime furnaces and production of brick. Specifications

GOST R 51588-2000: Hard coal and anthracites of Kuznetsk and Gorlovsky basins for technological purposes. Specifications

GOST R 51626-2000: Chemical (synthetic) fibres. Safety requirements

GOST R 51660-2000: Services. Boots repair services. General specifications

GOST R 51691-2000: Paint materials. Enamels. General specifications

GOST R 51691-2008: Paint materials. Enamels. General specifications

GOST R 51692-2000: Boiled oils. General specifications

GOST R 51693-2000: Anticorrosion primers. General specifications

GOST R 51738-2001: Biotechnical industries equipment. Vegetable materials hydrolysis apparatus. Fermenters. Safety requirements. Test methods

GOST R 51775-2001: Wheel sets for the special-purpose rolling stock. General specifications

GOST R 51896-2002: Well sucker-rod pumps. General technical requirements

GOST R 51957-2002: Chelyabinsk Basin coals for pulverized, stratified burning and domestic needs. Specifications

GOST R 51971-2002: East Siberia coals for power supply purposes. Specifications

GOST R 51972-2002: East Siberia coals for power supply and technological purposes. Specifications

GOST R 52020-2003: Water dispersible paint materials. General specifications

GOST R 52056-2003: Polymer-bitumen binders for roads on the basis of block copolymers of styrene-butadiene-styrene type. Specifications

GOST R 52146-2003: Cold rolled and cold rolled hot-galvanized sheet with polymer coating, prepainted by the continuous coil-coating process. Specifications

GOST R 52165-2003: Paint materials. Varnishes. General specifications

GOST R 52284-2004: Fire aerial ladders. General technical requirements. Test methods

GOST R 52365-2005: Seals. Requirements for test methods of locking system reliability and resistance to unauthorized access

GOST R 52543-2006: Hydraulic drives. Safety requirements

GOST R 52568-2006: Steel pipes with defensive covering for main gas and oil pipelines. Specifications

GOST R 52569-2006: Frits. Specifications

GOST R 52576-2006: General use highways. Road marking materials. Test methods

GOST R 52616-2006: Live vaccine against anthrax of animals from strain 55-VNIIVV & M. Specifications

GOST R 52727-2007: Technical diagnostics. Acoustic-emission diagnostics. General requirements

GOST R 52728-2007: Method of strain-and-temperature measurements in situ. General requirements

GOST R 52731-2007: Non-destructive testing. Stress evaluation by ultrasound. General requirements

GOST R 52751-2007: Steel-fibro-concrete slabs for bridge spans. Specifications

GOST R 52869-2007: Pneumatic drives. Safety requirements

GOST R 52889-2007: Non-destructive testing. Ultrasound measurement of screw tightening forces. General requirements

GOST R 52890-2007: Non-destructive testing. Evaluation of stresses in material of pipelines by ultrasound. General requirements

GOST R 52891-2007: Control of residual technological stresses by laser interferometrical method. General requirements

GOST R 53039-2008: Food additives. Food potassium lactate E326. Specifications

GOST R 53098-2008: Nutrient stillage. Specifications

GOST R 53116-2008: Organic fertilizers on basis of waste of crop production and plant processing enterprises. Specifications

GOST R 53117-2008: Organic fertilizers on basis of waste of stock-raising. Specifications

GOST R 53191-2008: Wheelset assembly for locomotives and motor-powered units using shrink fit method. Typical technological process

GOST R 53192-2008: Welded steel structures of freight cars. Technical requirements

GOST R 53192-2014: Welded joints in steel structures of railway rolling stock. Requirements for design, production and quality control

GOST R 53198-2008: Ores and concentrates of non-ferrous metals. General requirements for methods of chemical analysis

GOST R 53202-2008: Paint materials being in contact with food products. General specifications

GOST R 53204-2008: Non-destructive testing. Alternating stress evaluation by ultrasound. General requirements

GOST R 53205-2008: Non-destructive testing. Evaluation of grains size of steel by ultrasound. General requirements

GOST R 53237-2008: Fiber glass. General requirements for safety in the course of Production and Application

GOST R 53328-2009: Fire fighting technics. Fire extinguishing trucks. General technical requirements. Test methods

GOST R 53329-2009: Fire elevators. General technical requirements. Test methods

GOST R 53330-2009: Fire foam elevators. General technical requirements. Test methods

GOST R 53380-2009: Soils and Grounds. Hothouse grounds. Specifications

GOST R 53381-2009: Soils and Grounds. Feeding Grounds. Specifications

GOST R 53396-2009: White sugar. Specifications

GOST R 53403-2009: Iron ores, concentrates, agglomerates and pellets. Method for the determination of titanium content

GOST R 53427-2009: Aerosol packaged perfumery and cosmetic products. General specifications

GOST R 53432-2009: Printed circuit boards. General technical requirements for manufacture

GOST R 53481-2009: Lubrication systems. Safety requirements

GOST R 53491.1-2009: Pools. Treatment of water. Part 1. General requirements

GOST R 53491.2-2012: Pools. Treatment of water. Part 2. Safety requirements

GOST R 53630-2009: Pressure multilayer pipes for water-supply and heating systems. General specifications

GOST R 53657-2009: Iron ores, concentrates, agglomerates and pellets. Method for determination of divalent iron calculated as ferrous oxide

GOST R 53658-2009: Iron ores, concentrates, agglomerates and pellets. Atomic absorption method for determination of copper content

GOST R 53659-2009: Iron ores, concentrates, agglomerates and pellets. Atomic absorption method for determination of total manganese calculated as protoxide

GOST R 53765-2009: Poultry dung. Raw material for manufacture of organic fertilizers. Specifications

GOST R 53943-2010: Food additives. Calcium lactate Е327. Specifications

GOST R 54064-2010: Live vaccine against salmonellosis of animals. General specifications

GOST R 54093-2010: Wheel for railway stock. Methods of residual stress determination

GOST R 54129-2010: Emission of the exhaust gas pollutants by the main-line and shunting for the special-purpose rolling stock. Norms and determination methods

GOST R 54301-2011: Cold-rolled electrolyze zinc sheet with polymer coating, repainted by the continuous coil-coating process. Specifications

GOST R 54317-2011: Launching and technical complexes of space-rocket complexes. Safety requirements

GOST R 54401-2011: Automobile roads of general use. Hot road mastic asphalt. Technical requirements

GOST R 54418.1-2012: Renewable power engineering. Wind power engineering. Wind turbines. Part 1. Technical requirements

GOST R 54433-2011: Renovable power engineering. Wind power plants. Maintenance safety requirements

GOST R 54435-2011: Wind power plant constructions. Base safety requirements

GOST R 54468-2011: Flexible pipes with thermal insulation for district heating, hot and cold water networks. General specifications

GOST R 54487-2011: Non-destructive testing. Evaluation of gas porosity in aluminium casting alloys by ultrasound. General requirements

GOST R 54537-2011: Food additives. Calcium acetate Е263. Specifications

GOST R 54564-2011: Non-ferrous metals and alloys scarp and waste. General specifications

GOST R 54574-2011: Steel drums for paint materials. Specifications

GOST R 54633-2011: Products for reproduction. Сryopreserved sexed sperm of bulls. Specifications

GOST R 54636-2011: Products for reproduction. Сryopreserved semen of boars. Specifications

GOST R 54638-2011: Products for reproduction. Fresh-received diluted boar’s semen. Specifications

GOST R 54651-2011: Organic fertilizers on basis of sewage sludge. Specifications

GOST R 54763-2011: Medicinal remedies for veterinary. Manufacture production regulations. The maintenance, order of working out, the coordination and confirmation

GOST R 54780-2011: Machines for goods processing fruit. Test methods

GOST R 54901-2012: Dried beet pulp. Specifications

GOST R 54902-2012: Raw cane sugar molasses. Specifications

GOST R 54919-2012: Concentrates lead. Methods for the determination of gold and silver

GOST R 54921-2012: Zink concentrates. Atomic emission spectroscopy with inductively coupled plasma. Determination of copper, lead, cadmium, iron, aluminium, cobalt, antimony, manganese, arsenic and indium

GOST R 54928-2012: Pedestrian bridges for polymer composites. Specifications

GOST R 55004-2012: Renewable power engineering. Geothermal power plants. Base safety requirements

GOST R 55005-2012: Renewable power engineering. Geothermal power plants. Safety requirements under operation

GOST R 55042-2012: Non-destructive testing. Evaluation of metallic coating thickness by ultrasound. General requirements

GOST R 55043-2012: Non-destructive testing. Evaluation of elastic-acoustic coefficients. General requirements

GOST R 55052-2012: Reclaimed asphalt. Specifications

GOST R 55074-2012: Chemical resistance polymer composites for lining industrial tanks and vessels. General specifications

GOST R 55078-2012: Fiberglass reinforced thermosetting plastic pipes. Glass reinforced thermosetting plastics cylinder shells of chimney and flue-pipes. Specifications

GOST R 55153-2012: The mountain-mine equipment. Underground loading-transport machines. The safety requisitions and test methods

GOST R 55275-2012: Live vaccine against rabies of animals

GOST R 55283-2012: Inactivated vaccines against rabies of animals. Specifications

GOST R 55301-2012: Fodder yeast from the corn distillers. Specifications

GOST R 55308-2012: Artificial leather for industrial safety shoes. General specifications

GOST R 55439-2013: Inland water transport. Operation of cargo transfer complexes and passenger terminals of river ports. Safety requirements

GOST R 55454-2013: Washing zoohygienic liquid products for unproductive animals. General specifications

GOST R 55476-2013: Products zoocosmetics for unproductive animals. Creams and gels. General specifications

GOST R 55558-2013: Sulphide copper-nickel ore. Mass-spectrometry method for determination of platinum, palladium, rhodium, ruthenium, iridium and cold content with preliminary collecting for nickel matte

GOST R 55570-2013: Organic fertilizers. Biocompost. Specifications

GOST R 55571-2013: Organic fertilizers on basis of solid domestic waste. Specifications

GOST R 55618-2013: Guide for procurement of power station equipment. Part 5-3. Wind turbines

GOST R 55658-2013: Panels wall with the wooden framework. Specifications

GOST R 55765-2013: Biological medicine remedies for veterinary use. Vaccines against a virus haemorrhagic disease of rabbits tissue inactivated. Specifications

GOST R 55805-2013: Non-destructive testing. Ultrasonic monitoring of texture in rolled steel sheets. General requirements

GOST R 55806-2013: Non-destructive testing. Ultrasound measurement of bonding strength of layers in bimetal. General requirements

GOST R 55807-2013: Non-destructive testing. Ultrasonic monitoring of internal straight pipe threads. General requirements

GOST R 55973-2014: Food additives. Calcium chloride. Technical requirements

GOST R 55985-2014: Functional feeding stuffs for non-productive animals. General specifications

GOST R 56004-2014: Organic fertilizers. Vermicomposting. Specifications

GOST R 56185-2014: Technical diagnostics. Evaluation of stresses in sides of pressure vessels by ultrasound. General requirements

GOST R 56186-2014: Technical diagnostics. Evaluation of a status of long used rails by acoustic method. General requirements

GOST R 56187-2014: Technical diagnostics. Ultrasonic monitoring of steel overheating sheets. General requirements

GOST R 56204-2014: Steam and hot-water stationary boilers. Steel structures. General operating specification

GOST R 56232-2014: Determination of B«stress-strainB» diagram in the course of ball instrumental indentation. General requirements

GOST R 56244-2014: Inland water transport. Cargo transfer complexes and passenger terminals of river ports. Cargo handling machines and equipment maintenance. Safety requirements

GOST R 56249-2014: Technical gas sulphur. Specifications

GOST R 56306-2014: Silver. Method of inductively coupled plasma atomic-emission analysis

GOST R 56383-2015: Artificial dried grass fodder. Specifications

GOST R 56393-2015: Passenger cars on locomotive traction. Test methods of sanitary-hygienic and ecological indicators

GOST R 56512-2015: Non-destructive testing. Method of magnetic particle testing. Standard technological processes

GOST R 56553-2015: Low voltage systems. Cable systems. Installation of cable systems. Planning and installation inside buildings

GOST R 56600-2015: Reinforced concrete prestressed slabs for pavements of roads. Specifications

GOST R 56663-2015: Non-destructive testing. Quality control of engineering products by residual magnetization formed during their manufacture. General requirements

GOST R 56664-2015: Non-destructive testing. Evaluation of stress state material engineering products by acoustoelastic methods. General requirements

GOST R 56665-2015: Non-destructive testing. Ultrasonic method for determining the residual stresses in the railway wheel rims. General requirements

GOST R 56666-2015: Technical diagnostics. Acoustic method of diagnostics and evaluation a residual resource of side frames trucks wagons. General requirements

GOST R 56667-2015: Technical diagnostics. Acoustic method for assessing conditions of high-speed wagons. General requirements

GOST R 56708-2015: Polymer hexagonal geogrid. Specifications

GOST R 57021-2016: Kansk-Achincky basin coals for power supply purposes. Specification

GOST R 57072-2016: Probiotics 'Subtilin' and 'Acidophil' (probiotic feed additive). Specifications

GOST R 57087-2016: Dry bacterial starter for making silage of food. Specification

GOST R 57154-2016: Technical diagnostics. Monitoring of mechanical and heat npp equipment. General requirements

GOST R 57172-2016: Technical diagnostics. Determination of surface residual stresses by method of instrumental indentation. General requirements

GOST R 57173-2016: Calculation and strength testing. Methods of mechanical testing of metals. Test for stress relaxation of metals and alloys at a compression. General requirements

GOST R 57179-2016: Thermite welding of rails. The method of testing and quality control

GOST R 57850-2017: Fodder threonine. Specifications

GOST R 9.518-2006: Unified system of corrosion and ageing protection. Temporary corrosion protection during assembling operations. General requirements

IM 4-12-95: Automation systems. Handbook of materials. Part 1. Basic materials

Indication O-1515u: Recommendations for planning labor protection measures in railway transport

M 15-2010: Recommendation. General requirements for quantitative chemical analysis

M 15-2019: Recommendation. General requirements for analysis methods

Manual: Manual for impulse and low consumption fire extinguishing systems

Manual for MGSN 2.09-03: Corrosion protection of concrete and reinforced concrete structures of transport facilities

Manual for SNiP 11-01-95: A collection of explanations of certain provisions and the contents of paragraphs of the Instructions on the procedure for the development, coordination, approval and preparation of project documents for the construction of enterprises, buildings and structures of SNiP 11-01-95 (Questions and Answers)

Manual for SNiP 11-01-95: A guide to SNiP 11-01-95 on the development of a section of project documentation "Organization and working conditions of workers. Production and enterprise management"

Manual for SNiP 11-01-95: The manual on the initial requirements for the development of design documentation for equipment of individual production (to SNiP 11-01-95)

Manual for SNiP 11-01-95: Guide to SNiP 11-01-95 on the development of the section of project documentation "Environmental Protection"

Manual for SNiP 2.04.05-86: Manual for the design of automated climate control systems for industrial buildings

Manual for SNiP 3.05.01-85: Manual for the production and acceptance of work when installing ventilation and air conditioning systems

Manual for SNiP III-18-75: A manual on quality control methods for welded joints of metal structures and pipelines performed in construction

MDS 12-16.2003: Recommended Practice for the Development of Local Regulations (Proprietary Standards) for Use in an Occupational Safety and Health Management Systems in a Construction Organization

MDS 12-22.2005: Recommendations for the application in the construction industry of the requirements of regulatory legal and other regulatory acts containing state regulatory labor protection requirements

MDS 12-23.2006: Temporary recommendations on the technology and organization of construction of multifunctional high-rise buildings and building complexes in Moscow

Methodical instructions 2942-83: Improvement of working conditions at enterprises producing and using phosphors

MI 1276-86: Guidelines. GSE. Table scales for determining and recording the mass and cost of products 1799 ВЧЧ-3 Dina, 9026 ВН-3D13, 9026 ВН-10Д13, 9026 ВН-6Д13 and 1261 ВН-3ЦТ. Method of verification

MI 1382-86: Guidelines. Protractor pendulum. Type ZURI-M. Method of verification

MI 1725-87: Methodical instructions. GSI. Spring measuring heads with a division price of 0.05 and 0.02 mm. Verification Method

MI 2018-89: State system for ensuring uniformity of measurements. Micrometric depth gauges. Method of verification

MI 2077-90: Micrometers with inserts

MI 2087-90: Recommendation. State system for ensuring uniformity of measurements. Micrometers desktop with a dial reading device. Method of verification

MI 2190-92: State system for ensuring uniformity of measurements. Shtangenreysmasy. Method of verification

MI 2192-92: State system for ensuring uniformity of measurements. Indicators of the watch type with a division value of 0.01 mm. Method of verification

MI 2196-92: Depth gauges

MI 2520-99: State system for ensuring uniformity of measurements. Scales electromechanical heavy. Method of verification

MI 2728-2002: State system for ensuring uniformity of measurements. The list of regulatory documents on security requirements. The order of their application in the normative documents of the ICE

MI 424-84: State system for ensuring uniformity of measurements. Shtangenreissmass arrow model BV-6226. Methods and means of verification

MI 516-84: Methodical instructions. Caliper of the traveling PShV type. Verification Method

MI 524-89: Recommendation. GSE. Stangenzubomery with nonius. Types of SHZN-18, SHZN-40. Method of verification

MI 782-85: Guidelines. State system for ensuring uniformity of measurements. Micrometers with a division value of 0.01 mm. Method of verification

MI 905-85: State system for ensuring uniformity of measurements. Micrometer pipe. Type MT 15-M. Verification Method

MP 001-06-2012: Micrometers MK, ML, MT, MZ. Verification Method

MT-RTS-VIK-M-01-2017: Methods of visual and measuring control of trunnions and traverses of metal pouring ladles, hooks and extensions of hook suspensions of cranes transporting molten metal

MU 0898-00.001: Methods of conducting non-destructive testing of hooks of lifting and transport equipment (automobile, tractor, trailer cranes and crane beams)

MU 1002-00.004: Methods of conducting non-destructive ultrasonic testing of steam double-drum boilers of the type DE and Е-1-9

MU 1198-00.006: Method of conducting non-destructive testing of the pulley block

MU 1198-00.007: Method of nondestructive testing of hook blocks and lifting hooks

MU 1198-00.009: UTBC-5-170 hook block non-destructive testing methodology

MU 1198-00.010: Method for the non-destructive testing of shaft shaft winch LV-15

MU 1198-00.011: PBC-4 key non-destructive testing procedure

MU 1198-00.012: Methods of conducting non-destructive testing of HC-250 swivels

MU 1798-00.001: Methods of conducting non-destructive testing of the universal machine key UMK-1C

MU 4296/755-00.011: Method of conducting non-destructive ultrasonic testing of gearbox KPC-700

MU 4428-87: Guidelines for improving the state preventive sanitary inspection of the design of workshops and welding stations, the development of technological processes and equipment for welding production

MU OT RM 02-99: Assessment of the safety of workplaces for their certification of working conditions

NB ZhT TsP 110-2003: Spring terminals of a flawless separate fastening ZhBR-65. Safety standards

NB ZhT TsP 122-2003: Intermediate rail fastenings of a railway track. Safety standards

NB ZhT TsP 142-2003: Covers with polymeric coating for insulating joints of railway rails. Safety standards

NPB 101-2005*: Fire safety standards of the Republic of Belarus. The main fire trucks. General technical requirements. Test methods

NPB 163-97*: Fire fighting equipment. The main fire trucks. General technical requirements. Test methods

NPB 181-99: Fire water tenders , complete parts and accessories. Release from repair. General technical requirements. Test methods

NPB 188-2000: Fire aerial ladder. General technical requirements. Test methods

NPB 192-2000: Fire engineering. Communnication and lighting truck. General technical requirements. Test methods

NPB 194-2000: Fire engineering. Smoke ejector truck. General technical requirements. Test methods

NPB 195-2000: Fire water tenders, complete parts and accessories. Release from repair. General technical requirements. Test methods

NPB 197-2001: Fire elevators. General technical requirements. Test methods

NPB 198-2001: Fire elevators, complete parts and accessories. Release from repair. General technical requirements. Test methods

NPB 307-2002: Fire fighting vehicles. Designation

NPB 311-2002: Fire equipment. Command vehicle. General technical requirements. Test methods

NPB 312-2003: Fire engineering. Rescue vehicle. General technical requirements. Test methods

NPB 314-2003: Firefoam elevators. General technical requirements. Test methods

NTP 10-12976-2000*: Norms of technological design of enterprises of the alcohol industry

NTP 10-12977-2000: Standards of technological design of enterprises of the alcoholic beverage industry

NTP-APK 1.10.04.002-02: Engineering Design Standards for Camel Breeding Facilities

NTP-APK 1.10.05.001-01: Engineering Design Standards for Poultry Raising Facilities

NTP-APK 1.10.06.001-00: Engineering Design Standards for Fur Farms and Rabbit Farms

NTP-APK 1.10.06.002-01: Norms of technological design of enterprises of low power of animal husbandry and rabbit farms

NTP-APK 1.10.09.002-04: Standards of technological design of complexes for the cultivation of champignons

NTP-APK 1.10.09.003-04: Norms of technological design of oyster mushroom growing complexes

NTP-APK 1.10.10.001-02: Engineering Design Standards for Grain Seed Companies and Small-Capacity Grain Processing Facilities

NTP-APK 1.10.12.001-02: Engineering Design Standards for Facilities for Storage and Processing of Potatoes and Fruit and Vegetable Products

NTP-APK 1.10.13.001-03: Norms of technological design of warehouses of solid mineral fertilizers and chemical ameliorants

NTP-APK 1.10.13.002-03: Technological design norms for warehouses of liquid matters for chemicalization

NTP-APK 1.10.13.003-03: Technological design standards for pesticide stores

NTP-APK 1.10.16.001-02: Engineering Design Standards for Livestock Raising Farms and Complexes

NTP-APK 1.20.11.001-04: Standards of technological design of enterprises of the yeast industry

ODM 218.2.003-2007: Recommendations for the use of polymer-bitumen binders based on SBS-type block copolymers in the construction and reconstruction of roads

ODM 218.2.014-2011: Guidelines for the use of steel-fiber-concrete in the repair of bridge structures

ODM 218.2.063-2015: Recommendations for the use of deep-mixing technology to strengthen the weak soils of the road bed

ODM 218.2.075-2016: Guidelines for the use of structural composite grids and gratings instead of steel when used to strengthen the arches of tunnels and retaining walls by the method of gunning

ODM 218.3.007-2011: Rationing of the properties of organic binders depending on climatic conditions and operating conditions of coatings

ODM 218.3.016-2011: Guidelines for the determination of fractional segregation of asphalt mixes

ODM 218.3.026-2012: Recommendations for the use of high-density asphalt concrete based on polymer-bitumen binders for road pavements in different climatic conditions of the Russian Federation

ODM 218.3.027-2013: Recommendations for the use of fabric composite materials in the repair of reinforced concrete structures of bridge structures

ODM 218.3.045-2015: Recommendations on the construction of seamless sprayed bridge waterproofing from composite materials on reinforced concrete and steel orthotropic slabs of span structures of bridge structures, as well as on other building structures made of steel and rei

ODM 218.3.058-2015: Guidelines for the use of synthetic fiber for dispersed reinforcement of hot asphalt concrete

ODM 218.3.089-2019: Guidelines for the experimental use of prestressing reinforcement made of high-strength composite materials for reinforcing reinforced concrete bridge structures

ODM 218.3.096-2017: Guidelines for the volumetric design of asphalt mixtures according to the Marshall Methodology

ODM 218.4.002-2009: Recommendations for protection against corrosion of structures used on the roads of the Russian Federation bridges, fences and road signs

ODM 218.4.038-2017: Guidelines for the acceptance of coatings from dense asphalt concrete mixtures, designed by the volumetric method

ONTP 01-86/Minavtotrans RSFSR: All-Union norms for technological design of automobile transport enterprises

ONTP 01-91: All-Union norms for technological design of automobile transport enterprises

ONTP 02-85: National Engineering Design Standards for Lumbering Facilities

ONTP 02-94: Sectoral norms of technological design of enterprises in the automotive industry. Woodworking shops (sites)

ONTP 07-85: All-Union norms for the technological design of precast concrete enterprises

ONTP 08-87: All-Union norms for the technological design of engineering, instrument-making and metal-working enterprises. Workshops for the repair of pipelines, sanitary appliances and heat and power equipment

ONTP 09-85: All-Union norms of technological design of enterprises for the production of products from cellular and dense autoclaved concrete

ONTP 10-85: All-Union norms of technological design of production for the manufacture of products from metal powders based on iron and copper

ONTP 11-93: Standards for the technological design of engineering, instrument-making and metal-working enterprises. Workshops for the production of tools and tooling (completion ONTP-11-93)

ONTP 14-93: Standards for the technological design of engineering, instrument-making and metal-working enterprises (refinement of ONTP-14-93). Mechanical processing assembly shops

ONTP 1-85/Minstrojdormash: All-Union norms of technological design of engineering enterprises, instrument making metallo-processing. Metalwork shops (Stocking and welding production)

ONTP 444-86: National Engineering Design Standards for Facilities for the Production of Mineral Wool Products and Building Components

ONTP 4-86: All-Union norms of technological design of transport on the surface of mining enterprises

ONTP 51-1-85: National Engineering Design Standards. Trunk Pipelines. Part I: Gas Pipelines

ONTP 6-85: All-Union norms of technological design of warehouse complexes and mechanical repair shops of mines, mines and concentration plants of the mining industry

OST 107.12.028-2002: Occupational safety standards system. Flammable, combustible, chemically hazardous and harmful substances. Safety requirements for use, storage and transportation

OST 108.020.131-85: Steam, Gas and Hydraulic Turbines. General requirements for conservation.

OST 108.030.113-87: Carbon and alloy steel forgings for thermal and nuclear power stations equipment and pipelines. Technical specifications.

OST 108.030.30-79: Stationary structural steel boilers. General specifications.

OST 108.030.40-79: Pipe elements of hear surfaces, connecting pipes with boiler, land-type steam boiler headers. General specifications.

OST 108.033.01-86: mechanical stokers. Technical conditions.

OST 108.109.01-92: Basic part billets made of corrosion-resistant steels of austenitic class. Technical conditions.

OST 108.838.10-80: Remote cyclones for low- and middle pressure boilers. General specifications.

OST 108.988.01-82: Preservation of items of boiler production. Lubricants, inhibitors. Technical requirements.

OST 113-18-014-87: Occupational safety standards system. Loading and unloading operations. General safety requirements.

OST 2 N83-44-80: Occupational safety standards system. Arc and electroslag welding. Safety requirements

OST 2 N83-45-80: Occupational safety standards system. Contact welding. Safety requirements

OST 2 N83-46-80: Occupational safety standards system. Oxygen cutting. Safety requirements

OST 2 Н83-44-80: Occupational safety standards system. Electric arc welding and slag welding. Safety requirements.

OST 2 Н83-45-80: Labour safety standard system. Contact welding. Safety requirements.

OST 2 Н83-46-80: Labour safety standard system. Oxygen cutting. Safety requirements.

OST 21.112.0.001-85: Constructional materials industry safety standard system.

OST 24.023.31-85: Multi-casting steel in forging ingots. Typical technological process.

OST 24.050.34-84: Wagon steel structures design and production. Specifications.

OST 24.149.03-89: Cogwheels for traction rolling stock of mainline railways. Technical conditions.

OST 24.201.03-90: Steel high-pressure vessels and devices. General technical requirements.

OST 24.207.01-90: Pipeline fittings. Casting from cast iron and colour alloys. General specifications.

OST 26.260.18-2004: Process modules for oil and gas industry. General technical specifications

OST 26.260.758-2003: Metal structures. General technical requirements.

OST 32.13-82: Preparation of tanks for filling and repair. Safety requirements

OST 32.146-2000: Devices of railway automation, telemechanics and telecommunications. General specification requirements

OST 32.72-97: Reinforced concrete slabs without ballast bridge bed for metal superstructures of railway bridges. General specifications

OST 34-13-910-86: Cargo rope slings for construction. Technical conditions

OST 35-15-82: Technological processes. Waterproofing of concrete roof panels with mastic compounds in the factory.

OST 35-23-83: Occupational safety standards system. Construction of highways. Asphalt and concrete and black coatings and foundations. Safety requirements.

OST 36-100.2.03-84: Occupational safety standards system. Labour saving tools. Installation tools and devices. General safety and ergonomics requirements.

OST 36-100.3.06-85: Occupational safety standards system. Special works on the erection of high-level reinforced concrete structures. Safety requirements.

OST 36-100.3.13-85: Labour safety standard system. Processing equipment installation. General safety requirements.

OST 36-13-90: Shields and consoles of automation systems for technological processes. General technical conditions

OST 36-37-79: Labour safety standard system. Lifting mechanisms with a manual drive. General ergonomic and safety standards.

OST 36-62-81: Hoisting equipment. General technical requirements.

OST 36-79-83: Steel process pipes of carbon and low alloy steels Pi up to 10 MPa (100 kgs/cm2). Semi-automatic welding with consumable electrode in carbon dioxide. Typical process.

OST 4.054.035-78: Spring elements from alloys of ferrous and non-ferrous metals. Heat treatment. Typical Processes

OST 45.183-2001: stationary Installations of Electrical power of electrical connection apparatus. General technical requirements.

OST 45.37-86: Organization of works regarding telephone repair.

OST 4G 0.054.268: Radio-electronic equipment. Assembly and assembly production. Wiring by solderless methods. Typical Technological Operations

OST 5R.9527-94: Pipes and products of general purpose marine systems. Cleaning and preservation (before installation). Typical processes.

OST 64-02-003-2002: Products of the medical industry. Technological regulations of production. Content, procedure of development, coordination and approval

OST 64-7-472-83: Occupational safety standards system. Production processes of finished pharmaceutical products. Production of ampouled injections. Safety requirements.

OST 68-12.0.01-02: Sectoral system of standards for labor safety. Main provisions

OST 92-9440-81: Conducting lacquer coating. Technical requirements and typical technological processes.

P SSFZhT 45/ISO 9001-2003: The certification system on the federal railway transport of the Russian Federation. Quality Management System. Requirements

PB 06-227-98: Safety regulations for auxiliary workshops of mining enterprises

PI 1.2.315-89: Production of glazing parts from organic glasses

PI 1.4.75-2000: Arc welding in shielding gases of structural, stainless and heat-resistant steels and alloys

PNST 105-2016: Sulfur concrete mixtures and sulfur concrete. General specifications

PNST 114-2016: Automobile roads of general use. Hot asphalt mixtures and asphalt. Technical requirements for volumetric design method according to Superpave methodology

PNST 127-2016: Automobile roads of general use. Asphaltic concrete mixtures stone-mastic. Technical requirements for the method of volume designing

POT R M-002-97: Intersectoral rules on labor protection in foundry

POT R M-003-97: Intersectoral rules on labor protection when performing forging and pressing

POT R M-004-97: Intersectoral labor protection regulations for the use of chemicals

POT R M-005-97: Intersectoral labor protection rules for heat treatment of metals

POT R M-006-97: Intersectoral labor protection rules for cold metal processing

POT R M-007-98: Industry-Wide Occupational Safety and Health Requirements for Freight Loading/Offloading and Placement Operations

POT R M-009-99: Intersectoral labor protection regulations for the production and use of mercury

POT R M-010-2000: Intersectoral labor protection rules in the production of asbestos and asbestos-containing materials and products

POT R M-011-2000: Intersectoral rules on labor protection in public catering

POT R M-013-2000: Industry-Wide Occupational Safety and Health Requirements for Chemical Cleaning and Washing

POT R M-014-2000: Intersectoral Occupational Safety Rules

POT R M-016-2001: Inter-Industry Occupational Safety and Health Regulations (Safety Regulations) for Operation of Electrical Installations

POT R M-017-2001: Inter-Industry Occupational Safety and Health Regulations for Painting Operations

POT R M-018-2001: Intersectoral labor protection rules when applying metal coatings

POT R M-019-2001: Intersectoral rules for labor protection in the production of acetylene, oxygen, the process of spraying and gas-plasma processing of metals

POT R M-022-2002: Intersectoral rules on labor protection during soldering and tinning of products

POT R M-028-2003: Intersectoral labor protection regulations for plastics processing

POT R O 13153-ZhDRM-946-03: Industry rules on labor protection during factory repair of locomotives and freight cars

POT R O 29-001-93: Labor protection regulations for printing companies

POT R O 97300-12-97: Labor protection regulations in the beer and non-alcoholic food industry

POT R O-001-2002: Rules on labor protection for printing organizations

POT R O-00-97: Occupational Safety and Health Requirements in the Pulp and Paper and Rosin Industry

POT R O-112-001-95: Rules for labor protection during the operation of oil depots and gas stations

POT R O-112-002-98: Rules for labor protection during the operation of trunk oil pipelines

POT R O-13153-TsT-926-02: Industry safety rules for railroad solid fuel bases

POT R O-14000-001-98: Rules on labor protection at enterprises and organizations of mechanical engineering

POT R O-14000-003-98: Rules for labor protection in the manufacture of boiler work and metal structures

POT R O-14000-007-98: Ordinance - Occupational Safety and Health for Material Storage

POT R O-200-01-95: Rules on labor protection in automobile transport

POT R O-29-002-94: Occupational Safety Rules for Publishers

POT R O-29-003-95: Occupational Safety Rules for Bookstores

POT R O-32-CV-400-96: Labor protection rules for the maintenance and repair of freight cars and refrigerated rolling stock

POT R O-32-TsT-668-99: Rules for labor protection during maintenance and current repair of traction rolling stock and cranes on the railway

POT R O-45-001-94: Rules on labor protection in institutions and enterprises of the postal service and Rospechat

POT R O-95120-001-94: Rules of labor protection at retailers

POT R O-97300-03-95: Occupational Health and Safety Rules

POT R O-97300-04-95: Rules for labor protection during storage and processing of fruits and vegetables

POT R O-97300-05-95: Rules for labor protection in food concentrate and vegetable drying industries of the food industry

POT R O-97300-06-95: Rules for labor protection in the sugar industry of the food industry

POT R O-97300-07-95: Rules for labor protection in the production of alcohol and alcoholic beverages

POT R O-97300-08-96: Rules on labor protection in animal husbandry. Pig breeding

POT R O-97300-09-96: Rules on labor protection in animal husbandry. Sheep and goat breeding

POT R O-97300-11-97: Rules for labor protection in the repair and maintenance of agricultural machinery

POT R O-97300-13-97: Occupational Safety and Health Requirements in Poultry Farming

POT R O-97300-14-97: Rules on labor protection in animal husbandry. Fur farming

POT RO-13153-TsL-923-02: Industry rules for labor protection in the passenger sector of the federal railway transport

POT RO-32-TsV-406-96: Rules for labor protection during the current repair and preparation for filling tanks for oil products and bunker-type cars for oil bitumen

POT RZhD-4100612-TsP-TsDRP-022-2013: Rules for labor protection, environmental, industrial and fire safety during maintenance and repair of infrastructure facilities of the railway complex of JSC Russian Railways

R 466-82: Guidelines for conducting induction training on labor protection in organizations and enterprises of the Ministry of Oil and Gas Industry

R 50-1-86: Reprography. Micrography. Technical control for production and use of microfilms

R 50-54-45-88: Recommendations. Calculations and tests of strength. Experimental methods for determining the stress-strain state of machine elements and structures. Method of full-scale tensometry of power equipment

R 50-601-21-92: Recommendations. Establishment of product safety requirements in standards and technical conditions

RD 02-01297858-00: Instructions for external insulation of shaped pipeline fittings and valve units with protective polyurethane coating of COPON HYCOTE type, produced by Company 165 E. WOOD, England.

RD 02-419-01: Model Guidelines for Occupational Safety and Health for Government Inspectors Performing Operational Inspections of Hoisting Machinery

RD 08-195-98: Instructions for the technical diagnosis of the state of mobile units for well repair

RD 10-197-98: Guidelines for Operating Condition Assessment of Bolted and Riveted Joints of Hoisting Cranes

RD 102-005-88: Complete-block method of building ground objects. General requirements

RD 12-331-99: Ordinance on Industrial Safety Conformity Assessment at Gas Supply Facilities

RD 1300-01297858-04-00: Instructions for applying an external protective combination coating based on insulating materials СHEMP-ТЭСHU. Firms E. WOOD, England and "PEPUS" of the firm "Komplast", Russia in sections of underwater crossings of oil and gas products

RD 13-03-2006: Guidelines on the procedure for conducting eddy current testing of technical devices and structures used and operated at hazardous production facilities

RD 13-04-2006: Guidelines on the procedure for conducting thermal control of technical devices and structures used and operated at hazardous production facilities

RD 13-05-2006: Methodical recommendations on the procedure for conducting magnetic particle inspection of technical devices and structures used and operated at hazardous production facilities

RD 13-06-2006: Guidelines for the procedure for capillary control of technical devices and structures used and operated at hazardous production facilities

RD 153-34.0-03.231-00: Model Instruction Occupational Safety and Protection for Electrical Welders

RD 153-34.0-03.288-00: Instructions for Gas Welders (Flame Cutter Operators)

RD 153-34.0-03.289-00: Model Occupational Safety and Health Guidelines for Operation of Screw Cutting Lathes

RD 153-34.0-03.290-00: Model Occupational Safety and Health Guidelines for Operation of Milling Machines

RD 153-34.0-03.291-00: Model Occupational Safety and Health Guidelines for Gear Milling Machines

RD 153-34.0-03.292-00: Model Occupational Safety and Health Guidelines for Operation of Grinding Machines

RD 153-34.0-03.293-00: Model Occupational Safety and Health Guidelines for Operation of Slotting Machines

RD 153-34.0-03.294-00: Model Occupational Safety and Health Guidelines for Operation of Drilling Machines

RD 153-34.0-03.295-00: Model Occupational Safety and Health Guidelines for Operation of Planing Machines

RD 153-34.0-03.296-00: Model Occupational Safety and Health Guidelines for Operation of Cutting-Off Machines

RD 153-34.0-03.297-00: Model Occupational Safety and Health Guidelines for Operation of Tool Grinding Machines

RD 153-34.0-03.420-2002: Occupational Safety and Health Requirements for Operation and Maintenance of Automobiles and Other Wheeled Vehicles in the Electric Power Industry

RD 153-34.0-04.185-2003: Machines and equipment for construction, technical re-equipment and repair of energy facilities. Requirements for design, materials, manufacturing, acceptance and testing

RD 153-34.0-20.608-2003: Guidelines. Project work for the repair of power equipment power plants. Requirements for the composition, content and design

RD 153-34.1-17.461-00: Methodological guidelines for penetrant testing of welded joints, weld pads and parent metal during manufacturing, installation, operation and repairing of power equipment.

RD 153-34.3-03.285-2002: Safety Requirements for Construction of Electric Power Transmission Lines and Electrical Installation Work

RD 153-39.4-113-01: Standards for technological design of main pipelines

RD 24.207.01-90: Piping fittings. Water-flap average life time dependence on specific pressure on the sealing surface

RD 26-12-29-88: Rules for conducting pneumatic tests of products for strength and tightness

RD 31.1.02-04: Rules of technical operation of lifting and transport equipment of sea trading ports

RD 31.11.81.39-83: Technical conditions of sea transportation of isobutyl alcohol in bulk

RD 31.11.81.40-83: Technical conditions of bulk carriage of isopropyl alcohol

RD 31.11.81.41-83: Technical conditions of sea transportation of diethylhexanol (isooctyl alcohol) in bulk

RD 31.11.81.42-83: Technical Specifications for Maritime Transport of Bulk Gas Condensate

RD 31.11.81.47-85: The map of the technological regime of sea transportation of glycerol in bulk

RD 31.11.81.49-85: Map of the technological regime of the sea transportation of propylene glycol in bulk

RD 31.44.01-97: Rules of technical operation of lifting and transport equipment of sea trading ports

RD 31.52.04-90: Polymer adhesive compositions. Application in ship repair. Technological requirements

RD 31.81.01-87: Safety requirements for inland and mixed navigation and marine equipment.

RD 31.82.03-87: Labour safety rules in sea ports.

RD 31.83.04-89: Labour safety rules in companies of the Ministry of Navy of the USSR.

RD 31.84.01-90: Uniform occupational safety rules for diving operations

RD 31.89.01-89: Occupational Safety and Health Requirements for Hydrographic, Charting, and Other Operations in the Arctic

RD 3-1297858-02: Instructions for external insulation with epoxy-polyurethane coating “UP-1000/FRUCS 1000A” in factory and field conditions, for valves, shaped fittings and separate pipeline sections.

RD 34 10.068-91: Welded joints of heat power plant equipment. Radiographic control.

RD 34.03.212: Interim Safety Guidelines for Installation of Conductors and Lightning Cables During Construction of 1150 kV Overhead Lines

RD 34.10.124-94: Instructions for the preparation and storage of welding materials

RD 34.10.126-94: Instructions for operational control of assembly processes, welding and heat treatment.

RD 34.10.130-96: Instructions for visual and measuring control.

RD 34.17.102-88: Guidelines for Use of Portable Magnetizing Devices for Magnetic Particle Flaw Detection of Parts of Electrical Equipment Without Cleaning Surfaces

RD 34.26.203: Guidelines for Brick Lining Work During Installation of Boiler Plants and Energy Facilities

RD 34.40.201-91: Procedural Guidelines for Modernization of Atmospheric-Pressure and Elevated-Pressure Deaeration Columns

RD 3661-01297858-02-01: Instructions for complex corrosion protection of storage tanks for petroleum and petroleum products materials company "Ameron", USA

RD 3661-01297858-03-01: Guidelines for corrosion protection of petroleum and oil reservoirs using one-component polyurethane paint coatings

RD 36-62-00: Hoisting equipment. General technical requirements.

RD 3689-002-00220302/31-2008: Welding of radiant tubes and their elements for reaction tube furnaces. Main provisions

RD 413160-02-01297858-03: Corrosion protection rules for stock-tank oil vessels and for dynamic and technological oil settling vessels

RD 50-186-80: Guidelines. Reliability in technology. Methods of choice, regulation and control of environments for gas and liquid nitriding

RD 50-187-80: Guidelines. Reliability in technology. Hardening of steel products by chemical and heat treatment. Diffusion chrome plating

RD 50-664-88: Guidelines. Metallic and non-metallic inorganic coatings. Electrolyte preparation and correction methods

RD EO 0069-97: Rules for the organization of maintenance and repair of systems and equipment of nuclear power plants

RD GM-01-02: Guidance Document for Corrosion Protection of Mechanical Equipment and Special Steel Structures of Hydraulic Structures

RD ROSEK 02-008-96: Passenger, hospital and freight elevators. Nondestructive control. Main provisions

RD ROSEK-001-96: Hoisting machines. Metal structures. Ultrasonic control. Key Points

RD ROSEK-003-97: Hoisting machines. Magnetic particle control. Key Points

RD ROSEK-004-97: Hoisting machines. Capillary control. Key Points

RD ROSEK-006-97: Hoisting machines. Metal structures. Ultrasonic thickness gauging. Key Points

RD ROSEK-007-97: Hoisting machines. Eddy current control. Key Points

RD RTM 26-07-233-79: Surfacing pipe fitting details sealing surfaces with 06Х20Н10М3Д3С4 type material.

RD RTM 26-07-241-79: Surfacing of sealing surfaces of pipeline fittings with monel metal

RD-APK 1.10.05.04-13: Guidelines for technological design of poultry enterprises

RD-APK 1.10.06.02-13: Engineering Design Standards for Fur Farms and Rabbit Farms

RD-APK 1.10.07.04-17: Guidelines for the technological design of veterinary and sanitary utilization plants

RD-APK 1.10.07.06-08: Guidelines for the technological design of veterinary and sanitary utilization plants

Recommendations: Aspiration smoke-sensitive alarms VESDA. Part 1. Scope

RMD 31-04-2008 Sankt-Peterburg: Recommendations for construction of residential and public high-rise buildings

RSN 40-81: Instructions for use of organosilicate compositions for corrosion protection of metal and other building structures, process equipment and decoration finishes of the building materials and facades of buildings

R-SSK 05-2016: Recommendations on the procedure, rules for the development, coordination and approval of work projects using lifting structures

RST RSFSR 687-83: Cylinders. Repair and technical certification. Rules of repair and examination

RST RSFSR 723-84: Occupational safety standards system. Works hazardous. Classification. General requirements

RST RSFSR 739-87: Seed potatoes. Storage under conditions of active ventilation. Typical process

RTM 36.2-87: Guide to the Use of Photographic Paper and Magnifying Screens for Quality Control of Welded Joints in Organizations Administered by USSR Minmontzhspetststroy

SanPiN 1.2.681-97: Hygienic requirements for production and safety of perfumes and cosmetics

SanPiN 2.2.3.757-99: Working with asbestos and asbestos-based materials

SanPiN 2.2.4.0-95: Hygiene requirements when working in conditions of constant magnetic fields

SanPiN 2.3.4.704-98: Production of rectified ethyl spirits, liquor and vodka products

SDOS-07-2012: Methodological recommendations on the procedure for tightness control of technical devices and structures used and operated at hazardous production facilities

SDOS-11-2015: Guidelines on the procedure for conducting ultrasonic testing of metal structures of technical devices, buildings and structures

SNiP 3.09.01-85: Precast reinforced concrete structure and work-piece production

SP 107.13330.2012: Greenhouses and hotbeds

SP 28.13330.2012: Corrosion protection of buildings structures. Updated living edition of SNiP 2.03.11-85

SP 325.1325800.2017: Buildings and construction. Rules for the production of demolition and recycling

SP 350.1326000.2018: Norms for technological design of sea ports

SP 4053-85: Sanitary Rules on the installation and operation of equipment for plasma treatment of materials

SP 4783-88: Sanitary regulations for the production of synthetic polymeric materials and enterprises for their processing

SP 4950-89: Sanitary regulations for the production of carbon-based materials (coal, graphitized, fibrous, composite)

ST RK 1447-2005: Pre-stressed reinforced concrete sleepers for railway with gage 1520 mm. General specification

ST RK 1520-2006: Locomotives with gage 1520 mm. Requirements for application of ecological control

ST RK 1976-2010: Fire engineering. Tower ladders. General specification

ST RK 1980-2010: Fire engineering. Basic fire fighting trucks. General specification

ST RK 1981-2010: Fire engineering. Fire aerial ladders. General specification

ST RK 2823-2016: Industrial explosives Poremit-1. Technical conditions

ST SSFZhT TM 151-2003: The wheels are seamless. Determination of the endurance limit of the disk. Typical Test Procedure

ST SSFZhT TM 152-2003: Finishing carriage axles. Definition of the endurance limit of the necks of the axes. Typical test method

ST SSFZhT TM 153-2003: Finished car axles. Determination of cyclic fracture toughness. Standard test procedure

ST SSFZhT TM-TsP 115-2001: Broad gauge railway rails. Typical method for determining the performance of wide gauge rail rails.

ST SSFZhT TsE 134-2002: 27.5 kV AC sectioning posts for electrified railways. Typical methods of certification tests.

ST SSFZhT TsE 135-2002: 3.3 kV AC sectioning posts for electrified railways. Typical methods of certification tests.

ST SSFZhT TsE 136-2002: Telemechanics equipment traction substations. Typical certification test methods

ST SSFZhT TsL-TsT 146-2003: Cast wheel centers for rolling stock of 1520 mm gauge railways. Typical methods of control of the macrostructure

ST SSFZhT TsL-TsT 147-2003: Cast wheel centers for rolling stock of 1520 mm gauge railways. Typical method of controlling the microstructure

ST SSFZhT TsP 107-2001: Crushed stone from natural stone for the ballast layer of the railway track. Typical test method.

ST SSFZhT TsP 112-2001: Composite linings for the joints of insulating rails. Typical methodology for conducting field testing.

ST SSFZhT TsT 042-99: Certification system standard for the federal rail transport. Brake discs of engine carrying equipment applied for railways. Standard testing procedure.

ST SSFZhT TsT 046-99: Shaft cardan main drive diesel locomotives and diesel trains. Typical test method

ST SSFZhT TsT 049-99: Transmission hydraulic for diesel locomotives and diesel trains. Typical test method

ST SSFZhT TsT-121-2001: Cylindrical cogged wheels of traction gearing of traction rolling stock of main railway lines. Standard testing method

ST SSFZhT TsT-TsV 045-99: Brake cylinders of railroad rolling stock. Standard testing method.

ST TsKBA 014-2004: Pipe fittings. Steel castings. General technical conditions

ST TsKBA 018-2007: Pipe fittings. Heat treatment of blanks (parts) of titanium and titanium alloys. Typical process

ST TsKBA 030-2006: Pipe fittings. Springs helical cylindrical. General technical conditions

ST TsKBA 050-2008: Pipe fittings. Castings from cast iron. Technical requirements

ST TsKBA 051-2008: Pipe fittings. Castings from non-ferrous alloys. Technical requirements

ST TsKBA 072-2009: Pipe fittings. Torques and dimensions of flywheels and handles

ST TsKBA 079-2010: General purpose pipeline valves. Paint coatings. General technical conditions

ST TsKBA 099-2011: Pipe fittings. Repairs. Organization of repair and general repair manual

STB 1172-99: Non-destructive testing. Control with penetrating (capillary) substances. General provisions

STB 1568-2005: Occupational safety standards system. Printing equipment. Safety requirements and test methods

STB 1734-2007: Chemical fibers and fabrics (synthetic). Safety requirements

STB 2240-2011: Perfume and cosmetic products in aerosol containers. General specifications

TR 103-07: Technical recommendations for the construction of road structures using asphalt concrete

TR 106-00: Technical recommendations on the use of water-swelling materials for the installation of impervious curtains and screens, and waterproofing underground structures

TR 107-00: Technical recommendations on the use of water-repellent compositions

TR 144-04: Technical recommendations on the use of waterproofing materials "Akvatron"

TR 186-07: Technological regulations for the installation of waterproofing keys Aquastop when constructing and restoring waterproofing of deformation and technological joints of concrete in reinforced concrete structures of underground and submerged structures

TR 197-08: Technical recommendations on the use of asphalt concrete mixtures modified with old asphalt concrete additives

TR 206-09: Technical recommendations on the design and production of works on the installation of walling pits in the cramped conditions of the existing urban development in Moscow

TR 50-180-06: Technical recommendations for the design and installation of pile foundations using discharge-pulse technology for high-rise buildings

TR 92-99: Technical recommendations on the use of the mineral expanding additive to cements IR-1

TR 99-99: Technical recommendations on the use of waterproofing mortars and concrete with the material "Akvatron-6" for underground construction

TSN 52-302-2003: Corrosion Protection of Concrete and Reinforced Concrete Structures of Transport Facilities

TU 108.11.853-87: Procurement of parts from purchased long products

TU 112000-001-12586100-2009: Steel curved profiles for light steel structures. Technical conditions

TU 1381-003-47966425-2006: Steel electric-welded steel pipes with an outer diameter of 610 - 1420 mm for gas pipelines for operating pressures up to 9.8 MPa

TU 1390-001-86695843-08: Steel pipes with a diameter of 57-1420 mm with an external two-layer and three-layer polyethylene coating

TU 1390-004-86695843-2010: Electrowelded steel pipes with a diameter of up to 1,420 mm with an external anticorrosive polyethylene coating for the construction of trunk pipelines

TU 1390-005-86695843-2010: Steel pipes with outer anti-corrosion polyethylene coating for gas pipelines

TU 1390-007-86695843-2010: Electrowelded steel pipes with a diameter of up to 1,420 mm with an external anti-corrosion polyethylene coating for the construction of field and main oil pipelines

TU 1390-008-86695843-2011: Steel pipes with internal smoothing coating for gas pipelines

TU 1390-010-86695843-2011: Steel pipes and pipeline components welded with an internal anti-corrosion coating based on a paint material with high dry residue

TU 1390-012-86695843-2011: Steel pipes and fittings 57–2020 mm in diameter with internal single-layer coating based on liquid solvent-free epoxy materials

TU 1390-014-86695843-2011: Steel pipes and parts of pipelines with external two-layer epoxy anticorrosion coating

TU 1390-015-86695843-2011: Steel pipes with Stelrant external anticorrosion polyurethane coating

TU 1390-016-86695843-2011: External epoxy coating for pipes. Technical conditions

TU 1390-017-05757848-2005: Electrowelded steel pipes with an internal smooth coating for gas pipelines with a diameter of 273 to 1420 mm

TU 1394-006-86695843-10: Steel pipes with epoxy protective coating

TU 1394-011-86695843-2011: Steel pipes with an external two-layer epoxy coating resistant to ultraviolet radiation. Technical conditions

TU 14-3-377-99: Steel welded longitudinal welded pipes for main gas and oil pipelines

TU 14-3R-110-2009: Thick-walled hot-deformed pipes made of corrosion-resistant steel. Technical conditions

TU 14-3R-115-2010: Centrifugally cast pipes for the chemical and petrochemical industries. Technical conditions

TU 14-3R-37-2000: Steel electric-welded longitudinal pipes with a diameter of 102–1220 mm with an external protective coating based on extruded polyethylene. Technical conditions

TU 14-3R-56-2001: Welded steel pipes with a diameter of 1420, 1620, 1720, 2020 and 2220 mm for general use. Technical conditions

TU 14-3R-67-2003: Electrowelded steel pipes with a diameter of up to 1,420 mm with an external anti-corrosion polyethylene coating for the construction of trunk pipelines. Technical conditions

TU 2310-001-83568382-2008: Composition for the treatment of concrete surfaces "Monolith-20M"

TU 2311-042-21743165-2005: Varnish "Yarly" V-PL-1120. Technical conditions

TU 2312-075-21743165-2005: Enamel "YARLI" V-MA-1232. Technical conditions

TU 26-02-1089-88: Type 1-AVG horizontal air coolers Technical conditions

TU 26-02-1098-89: Heat exchangers, shell and tube made of titanium. Technical conditions

TU 34-10-10173-80: Mobile boiler room PKBM - 10

TU 34-38-20140-94: Valves of gas pipelines TPP. General technical conditions for major repairs

TU 34-38-20365-94: Power valves. General technical conditions for major repairs

TU 34-38-20409-94: Pulse-safety devices Chekhov factory of power engineering. General technical conditions for major repairs

TU 3681-134-00220302-2007: Air coolers block-modular complete AVG-KB. Technical specifications

TU 4112-091-00220302-2005: Steel castings for equipment of oil refineries and petrochemical plants

TU 5284-001-56506912-03: The panel is sound-absorbing and soundproof, noise-proof. Technical conditions

TU 5285-003-42481025-2006: Cold-formed metal profiles such as "Siding", "Front panel", components and fasteners. Technical conditions

TU 5285-004-42481025-04: Steel curved profiles for building structures. Technical conditions

TU 5718-002-04000633-2006: Cast asphalt mix and cast asphalt mixes

TU 5718-003-04000633-2006: Asphalt (hot) and asphalt mixes for monolithic road structures

TU 6-10-1117-85: Primer EP-057 Protector

TU 6-10-1270-87: Varnish BT-5101

TU 6-10-741-79: PF-167 enamel of various colors

TU 67-18-163-93: Three-layer wall frameless panels with steel cladding and mineral wool insulation. Technical conditions

TU 67-18-172-94: Roofing and wall three-layer frame panels with steel linings and mineral wool insulation. Technical conditions

TU U 29.4-30482268.002-2001: Check valves, flame arresters and shut-off valves, as well as their combinations for gas-flame treatment of metals types KO, OB, OT

VNTP 02-86/MPS: Norms for the technological design of rail car depots for the repair of freight and passenger cars

VNTP 04-94k: Standards for technological design of enterprises for processing potatoes for starch

VNTP 10-79/Minavtoprom: Norms of technological design of metal-coating workshops of automobile industry plants

VNTP 12-79/Minsel'hoz SSSR: Norms of technological design of warehouses of solid mineral fertilizers and pesticides for collective farms, state farms and chemicalization points

VNTP 1-31-80/MChM SSSR: Instructions and norms for technological design and technical and economic indicators of the energy sector of ferrous metallurgy enterprises. Metallurgical plants. Volume 7. Electricity

VNTP 20-86: Industry-Specific Engineering Design Standards for Ceramics Industry Facilities. Ceramic Plumbing Fixtures Manufacturing

VNTP 9-1-80/MChM SSSR: Instructions and norms for technological design and technical and economic indicators of the energy sector of ferrous metallurgy enterprises. Metallurgical plants. Volume 11. Production of shielding gases

VRD 39-1.13-062-2002: Concept of Radiation Safety Assurance in Subsidiaries and Organizations of Gazprom OAO. Standard Procedures

VSN 176-78: Guidelines for the Design and Installation of Corrugated Metal Pipe Culverts

VSN 203-84: Safety Requirements for the Construction of Hi-Rise Reinforced Concrete Structures

VSN 362-87: Disinfections and Etching of Pipelines

VSN 436-82: Guidelines for Application of Organosilicate Composites for Protective Coatings for Steel Piping of Piped Heat Distribution Systems

VSN 454-84: Guidelines for Use of Isol [Rubber-Bitumen Roll Waterproofing Material] for Corrosion Protection for Steel Piping of Piped Heat Distribution Systems

Customers Who Viewed This Item Also Viewed:

Rules of Electrical Installations Design (Russian Electrical Code). 7th Edition. All sections and exhibits
Language: English
Price: $478.76
Foundation bolts. Structure and dimensions
Language: English
Price: $198.99
Pipeline valves. Leakage rates of valves
Language: English
Price: $173.25
Hot-rolled sheet. Range
Language: English
Price: $72.27
Steel welded vessels and apparatus. General technical conditions
Language: English
Price: $108.90
Flanges for valves, fittings and pipelines for pressure to PN 250. Design, dimensions and general technical requirements
Language: English
Price: $293.04
Stainless steels and corrosion resisting, heat-resisting and creep resisting alloys. Grades
Language: English
Price: $212.85
State system for ensuring the uniformity of measurements. Verification of testing equipment. General principles
Language: English
Price: $121.77
Billet of rotor shafts and rings of turbine generators
Language: English
Price: $1,487.33
Steel building structures. General specifications
Language: English
Price: $250.17
Fencing constructions for translucent buildings and structures. Design rules
Language: English
Price: $609.15
Metal products from structural alloy steel. Specification
Language: English
Price: $371.25
Obosnovanie bezopasnosti oborudovaniya. Rekomendatsii po podgotovke
Language: English
Price: $67.32
Reinforcing rolled products for reinforced concrete constructions. Specifications
Language: English
Price: $298.98
Electromagnetic compatibility of multimedia equipment. Emission requirements
Language: English
Price: $974.64
Non-destructive testing. Method of magnetic particle testing. Standard technological processes
Language: English
Price: $292.05
Supports for Cylindrical and Conical Upright Apparatus. Types and Basic Parameters
Language: English
Price: $573.20
Rolling stock of railways. Springs cylindrical screw. Certification requirements
Language: English
Price: $175.65
Steel structures
Language: English
Price: $297.00
Tests on electric and optical cables under fire conditions. Part 3-22. Flame spread of vertically-mounted bunched wires or cables. Category A
Language: English
Price: $102.96

YOUR ORDERING MADE EASY!

RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.

Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.

We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.

Placing Your Order

Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).

Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.

For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.

For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.

Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.

Your Order Best Quality and Authenticity Guarantee

Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).

We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.

We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.

All Codes and Regulations

All Categories

Send us a message Expand Collapse

Leave your message in the form below, and we will write back by e-mail!