GOST 12.1.030-81

ГОСТ 12.1.030-81

Electrical safety protective grounding, neutral grounding

Система стандартов безопасности труда. Электробезопасность. Защитное заземление, зануление

Status: Effective - Introduced for the first time. IUS 8-1981 The limitation of effectiveness has been lifted: Resolution of the State Standard No. 564 of 06.22.92

The standard applies to protective grounding and zeroing electrical installations of direct and alternating current with a frequency up to 400 Hz and establishes requirements for ensuring electrical safety by using protective grounding, grounding. The standard does not apply to protective grounding, zeroing of electrical installations used in hazardous areas, on electrified vehicles, ships, in metal tanks, under water, underground, and for medical equipment.

Стандарт распространяется на защитное заземление и зануление электроустановок постоянного и переменного тока частотой до 400 Гц и устанавливает требования по обеспечению электробезопасности с помощью защитного заземления, зануления. Стандарт не распространяется на защитное заземление, зануление электроустановок, применяемых во взрывоопасных зонах, на электрифицированном транспорте, судах, в металлических резервуарах, под водой, под землей и для медицинской техники.

Choose Language: 
Format: Electronic (pdf/doc)

Approved: USSR State Committee for Standards, 5/15/1981

SKU: RUSS16102

Price: $48.00




The Product is Contained in the Following Classifiers:

Construction (Max) » Standards » Other state standards used in construction » 13 Environmental protection, protection of people from environmental exposure. Security »

Evidence base (TR CU, Technical Regulation of the Customs Union) » 001/2011 TR TS. On safety of railway rolling stock » Regulations and standards (to TR CU 001/2011) »

Evidence base (TR CU, Technical Regulation of the Customs Union) » 003/2011 TR TS. On safety of railway infrastructure » Regulations and standards (for TR CU 003/2011) »

Evidence base (TR CU, Technical Regulation of the Customs Union) » 004/2011 TR CU. About safety of low voltage equipment » Regulations and standards (to TR CU 004/2011) »

Evidence base (TR CU, Technical Regulation of the Customs Union) » 010/2011 TR CU. On safety of machinery and equipment » Regulations and standards (to ТР ТС ТС 010/2011) »

PromExpert » SECTION III. LABOR PROTECTION AND SAFETY » III Occupational safety requirements for production equipment and processes » 2 Safety requirements for certain types of work » 2.10 Operation of electrical installations, electrical equipment and power tools »

PromExpert » SECTION III. LABOR PROTECTION AND SAFETY » II Industrial sanitation and occupational health » 6 Protection against electromagnetic radiation » 6.1 Non-ionizing electromagnetic fields and radiation »

ISO classifier » 13 ENVIRONMENTAL PROTECTION, HUMAN PROTECTION AGAINST ENVIRONMENTAL IMPACT. SECURITY » 13.260 Protection against electric shock. Means of protection »

National standards » 13 ENVIRONMENTAL PROTECTION, HUMAN PROTECTION AGAINST ENVIRONMENTAL IMPACT. SECURITY » 13.260 Protection against electric shock. Means of protection »

National Standards for KGS (State Standards Classification) » Latest edition » T General technical and organizational and methodological standards » T5 Documentation System » T58 System of standards infield of nature conservation and improvement of use of natural resources, labor safety, scientific organization of labor »

National Standards for OKSTU » SYSTEMS OF GENERAL TECHNICAL AND ORGANIZATIONAL-METHODOLOGICAL STANDARDS » Occupational safety standards system (SSBT). Scientific organization of labor. Safety precautions. Sanitation and occupational health »


The Document References:

GOST 12.1.013-78: Occupational safety standards system. Construction. Electrical safety. General requirements

ST SEV 3230-81: Electric installations with voltage up to 1000 V for AC and voltage up to 1500 V for DC. General requirements to electrical shock protection

The Document is Referenced By:

Decision 162: On the list of international and regional (interstate) standards, and in their absence - national (state) standards, the application of which on a voluntary basis ensures compliance with the requirements of the technical regulations of the Eurasian Economic Union "On requirements for main pipelines for the transportation of liquid and gaseous hydrocarbons (TR EAEU 049/2020), and the list of international and regional (interstate) standards, and in their absence - national (state) standards that contain rules and methods of research (tests) and measurements, including sampling rules necessary for the application and implementation of the requirements of technical regulation of the Eurasian Economic Union "On requirements for pipelines for the transportation of liquid and gaseous hydrocarbons (TR EAEU 049/2020) and conformity assessment of technical regulation objects

FTS ZhT TsL 01-98: Railway passenger cars. Certification requirements

FTS ZhT TsP 096-2002: Track-measuring equipment for monitoring and assessing the parameters of the state and the device of the railway track (track measuring meters). Certification requirements

GKINP 15-236-91: Instructions for printing processes in kartoizdaniya

GOST 10223-97: Weighing batchers of periodic operation

GOST 10512-93: Magnetic and electromagnetic separators

GOST 10580-2006: Technological foundry equipment. General specifications

GOST 10700-97: Waste paper and board. Specifications

GOST 11004-84: Principal ventilation mine blowers

GOST 11107-90: Artificial leather T, haberdashery. General specifications

GOST 11612.0-81: Photomultipliers. Measuring methods of the electric and light technics parameters

GOST 11930.0-79: Hard-facind materials. General requirements for methods of analysis

GOST 12.1.031-81: Occupational safety standards system. Lasers. Methods of dosimetrical control of laser radiation

GOST 12.2.007.7-83: Occupation safety standards system. Safety requirements. Factory-built assemblies of regulating equipment

GOST 12.2.026.0-2015: Woodworking machinery. Construction safety requirements

GOST 12.2.026.0-93: Woodworking equipment safety requirements for design

GOST 12.2.029-88: Machine tool attachments

GOST 12.2.045-94: The equipment for production of rubber-technical products

GOST 12.2.046.0-2004: Technological foundry еequipment. Safety requirements

GOST 12.2.094-83: Occupational safety standards system. Rolling equipment. General safety requirements

GOST 12.2.096-83: Standard system of labour safety. Steam boilers with pressure up to 0.07 MPa. Safety requirements

GOST 12.2.099-84: Occupational safety standards system. Aggregates for steel smelting. General safety requirements

GOST 12.2.100-84: Occupational safety standards system. Machines and equipment for manufacturing clay and lime brick, ceramic and asbestos cement products. General safety requirements

GOST 12.2.100-97: Machines and equipment for manufacturing clau and lime brick, ceramic and asbestos cement products. General safety requirements

GOST 12.2.102-2013: Occupational safety standards system. Machines and equipment for timber logging and floating. Safety requirements, control methods for safety requirements and evaluation of labour safety

GOST 12.2.102-89: Machines and equipment for timber logging and floating, forestry tractors

GOST 12.2.104-84: Mechanized logging equipment

GOST 12.2.105-84: Occupational safety standards system. Mineral processing equipment. General safety requirements

GOST 12.2.108-85: Occupational safety standards system. Rigs for drilling exploration and hydrogeological holes. Safety requirements

GOST 12.2.115-2002: Operation safety standard system. Blow-out preventers. Safety requirements

GOST 12.2.115-86: Occupational safety standards system. Blowout preventer equipment. Safety requirements

GOST 12.2.119-88: Occupational safety standards system. Rotary and rotary conveyor automatic lines. General safety requirements

GOST 12.2.124-2013: Occupational safety standards system. Alimentary product equipment. General safety requirements

GOST 12.2.124-90: The food industry equipment

GOST 12.2.132-93: Occupational safety standards system. Oil Extraction Wellhead Equipment. General Safety Requirements

GOST 12.2.135-95: Equipment for processing of meat and poultry farming products

GOST 12.2.139-97: Agricultural machinery. Maintenance-production equipment. General safety requirements

GOST 12.2.231-2012: Occupational safety standards system. Polygraphic equipment. Safety requirements and test methods

GOST 12.3.003-86: Occupational safety standards system Electric welding works. Safety requirements

GOST 12.3.016-87: Occupational safety standards system. Building construction anticorrosive protective works. Safety requirements

GOST 12.3.030-83: Occupation safety standards system. Safety requirements. Plastics processing

GOST 12.3.032-84: Occupational safety standards system. Electric installation works. General safety requirements

GOST 12.3.039-85: Occupational safety standards system. Plasma treatment of metals. Safety requirements

GOST 12.3.043-90: Occupational safety standards system. Industrial technologies of optical coating application on pieces. General safety requirements

GOST 12.4.124-83: Occupational safety standards system. Means of static electricity protection. General technical requirements

GOST 12.4.154-85: Occupational safety standards system. Screening devices for protection from power frequency fields. General technical requirements. Basic parameters and dimensions

GOST 12.4.222-2002: Special with upper from leather for the protection from vibration. Technical specifications.

GOST 12.4.256-2014: Occupational safety standards system. Filtering protective clothing. Method of determining the coefficient of package protection materials from fumes, gases of toxic substances in dynamic conditions

GOST 12.4.260-2014: Occupational safety standards system. Insulating suits. Test methods of insulating materials for permeability and the time of protective effect by liquid phase of oxidants

GOST 12.4.286-2015: Occupational safety standards system. Filter protective clothing from steams, gases of toxic substances. Test methods

GOST 12.4.289-2015: Occupational safety standards system. Insulating suits with forced oxygen supply into interior space of the suit. Test methods

GOST 12.4.301-2015: Occupational safety standards system. Special clothing for protection from sulphur dioxide. Method for determining the protective properties of materials

GOST 12.4.302-2015: Occupational safety standards system. Special protective clothing. Accelerated test methods on climatic ageing

GOST 12.4.311-2017: Occupational safety standards system. The suits isolating multipurpose. Test methods

GOST 12252-86: Angle modulation radio stations of land mobile service. Types. Basic parameters. Technical requirements. Methods of measurement

GOST 12645.0-83: Indium. General requirements for methods of analysis

GOST 1293.0-2006: Lead-antimony alloys. General requirements for methods of chemical analysis

GOST 1293.15-90: Antimonous lead alloys. Spectrographical method for determination of nickel

GOST 12997-84: SSI Products. General specifications

GOST 13.1.302-87: Reprography. Micrography. Vesicular film. General specifications

GOST 13047.1-2002: Nickel. Cobalt. General requirements for methods of analysis

GOST 13047.1-2014: Nickel. Cobalt. General requirements for methods of analysis

GOST 13348-74: Antimonous antimonides. Method of spectral analysis

GOST 13384-93: Measuring transducers for thermoelectric transducers and resistance thermo-transducers. General technical requirements and methods of tests

GOST 1341-2018: Vegetable parchment. Specifications

GOST 13496.7-97: Feed grain, grain by products, compound feeds. Methods for the determination of toxicity

GOST 13556-2016: Cranes. Tower cranes. General technical requirements

GOST 13556-91: Building tower pillars building tower pillars

GOST 13717-84: Pressure-operated indicating electrical-contact instruments

GOST 1429.14-2004: Tin-lead solders. Methods of atomic-emission spectral analysis

GOST 14662-83: Radiotelegraph channel receiving-transmitting equipment

GOST 14663-83: Point-to-point radio communication mf hf receivers

GOST 14940-96: Bleached sulphate pulp made of deciduous (aspen) wood. Specifications

GOST 15483.0-78: Tin. General requirements for methods of analysis

GOST 16264.0-2018: Electric machines of low power. Engines General specifications

GOST 16264.0-85: Low-power electric motors

GOST 16295-2018: Anticorrosive paper. Specifications

GOST 16295-93: Anticorrosion paper

GOST 17261-2008: Zinc. Methods of the atomic emission spectrographic analysis.

GOST 17261-77: Zinc. Spectral method of analysis

GOST 17335-79: Positive displacement pumps

GOST 17353-89: Devices for measuring the shape and arrangement deviations of the surface of revolution

GOST 17614-2018: Technical tellurium. Technical requirements

GOST 17772-88: Semiconducting photoelectric detectors and receiving photoelectric devices. Methods of measuring photoelectric parameters and determining characteristics

GOST 18103-84: Installations for manufacturing reinforced concrete three-dimensional elements of sanitary engineering cabins and lift shafts. Specifications

GOST 18140-84: SSI differential pressure gauges. General specifications.

GOST 18604.0-83: Bipolar transistors. General requirements for measuring of electrical parameters

GOST 18910-96: Hydraulic instruments and devices. General specifications

GOST 19138.0-85: Thyristors. General requirements for methods of measuring parameters

GOST 19263-73: Mains busways up to 1200 V, dc. General technical conditions

GOST 19497-90: Chill casting machines

GOST 19734-80: Input control devices for residential and public buildings

GOST 19834.0-75: Semiconductor emitters. Methods for measurement of parameters. General principles

GOST 20054-2016: Concrete non-pressure pipes. Specifications

GOST 20180-91: Radioisotope densitometers for liquid and pulp measuring

GOST 20398.0-83: Field-effect transistors. General requirements for measuring electrical parameters

GOST 20680-2002: Mechanical mixing devices (agitated vessels). General specifications

GOST 20996.0-2014: Selenium technical. General requirements for methods of analysis

GOST 21105-87: Non-destructive testing. Method of magnetic particle testing

GOST 21751-76: Sealants. Determination method of tensile strength, ultimate elongation at break and deformation set after break

GOST 21981-76: Sealants. Determination method of bond strength with metal at peeling

GOST 22012-82: Man-made noise from overhead power lines and electric substations. Limits and measuring methods

GOST 22045-89: Overhead travelling single-beam cranes. Specifications

GOST 22247-96: Centrifugal and section pumps for handling water. Basic parameters and dimensions. Safety requirements. Control methods

GOST 22505-83: Man-made noise from television receivers and frequency modulated usw broadcast receivers

GOST 22520-85: Pressure, pressure difference and vacuum transmitters with electrical analog output signals gsp

GOST 22579-86: Single-sideband modulation radio stations of land mobile service. Types, basic parameters, technical requirements and methods of measurement

GOST 22580-84: Angle modulation radio stations of marine mobile service. Types, basic parameters, technical requirements and methods of measurement

GOST 22661-77: Grapples for containers with a gross weight of 3.0, 5.0, and 6.0 metric tons

GOST 23116.0-83: Cadmium of high purity. General requirements for methods of spectral analysis

GOST 23450-79: Industrial radio noise from industrial, science, medical and domestic high-frequency equipment standards and measuring methods

GOST 24.104-85: Unified system of standards of computer control systems. Computer control systems. General requirements

GOST 24461-80: Power semiconductor devices. Test and measurement methods

GOST 24613.0-81: Optoelectronic integrated microcircuits and opto-couples. General requirements at measuring of electrical parameters

GOST 24752-81: Trolley bus bars of voltage up to 1 000 v

GOST 25024.0-83: Signal produce displays. General requirements to parameter measurement

GOST 25086-2011: Non-ferrous metals and their alloys. General requirements for methods of analysis

GOST 25792-85: Radio receivers for marine mobile service

GOST 25810-83: Sealed ferried contacts. Methods of measuring electrical parameters

GOST 26.205-88: Telemechanics complexes and devices

GOST 26054-85: Industrial robots for resistance welding

GOST 26056-84: Industrial robots for arc welding

GOST 26116-84: Well-logging apparatus.

GOST 26170-84: Non-destructive testing. Radio wave instruments. General technical requirements

GOST 26222-86: Ionizing-radiation semiconductor detectors

GOST 26346-84: Lighting buses for the ac voltage up to 660 v

GOST 263-75: Rubber. Method for the determination of Shore A hardness

GOST 26567-85: Semiconductor energy converters. Test methods

GOST 265-77: Rubber. Methods of short static compression tests

GOST 267-73: Rubber. Methods for the determination of density

GOST 26814-86: Optical cables. Methods of measurements

GOST 26840-86: Electrically-and-hand driven ventilating sets erv 72-2 and erv 72-3

GOST 26881-86: Stationary leaden batteries

GOST 26897-86: Single-sideband modulation radio stations of marine mobile service. Types, basic parameters, technical requirement and methods of measurement

GOST 26949-86: Integrated microcircuits. Methods for measuring of electrical parameters of continuous voltage regulators

GOST 26991-86: Optical connectors. Requirements for technological process

GOST 27173-86: Spectrometric units and devices for detection of ionizing radiation

GOST 27174-86: Open-type alkaline nickel-cadmium rechargeable cells and storage batteries of capacity up to 150 a/h

GOST 27338-93: Concrete mixing plant

GOST 27358-87: Press moulds for manufacturing of plastic items

GOST 27451-87: Ionizing radiation measurement instruments

GOST 27636-95: Stone extraction and processing equipment

GOST 27694-88: Integrated circuits. Low-, intermediate- and high-frequency amplifiers. Methods for measuring electric parameters

GOST 27780-88: Integrated circuits. Multiplexers and switches. Methods for measurement of electric parameters

GOST 27809-88: Steel and cast iron. Methods of spectroorganic analysis

GOST 27809-95: Cast iron and steel. Methods of spectrographic analysis

GOST 27810-88: Cathode-ray converter tubes. Measurement and control methods of parameters

GOST 28279-89: Electromagnetic compatibility of on-board radio equipment and vehicle electrical circuitry

GOST 28298-89: Mine equipment earthing. Check methods and specifications

GOST 28347-89: Rolling scaffold with movable working place. Specifications

GOST 28461-90: Artificial leather for garments. General specifications

GOST 28617-90: Metallic and non-metallic inorganic coatings of bicycles, motor cycles, scooters, motor bicycles. General requirements and methods of control

GOST 28723-90: Velocity, electromagnetic and vortex flow meters

GOST 28725-90: Instruments for measuring the level of liquids and loose materials

GOST 28775-90: Gas pumping units driven with gas turbine. General specifications

GOST 28812-90: Coke chemical pyridine-base products. Gas chromatographic method for determination of component composition

GOST 28814-90: Integrated circuits. Methods of measuring electrical parameters of pulse voltage regulators operation circuits

GOST 28836-90: Resistive strain-gauge

GOST 28840-90: Machines for tension, compression and bending tests of materials

GOST 28841-90: Machines for fatigue testing of materials

GOST 28845-90: Machines for long time strength creep, testing and relaxation of materials. General technical requirements

GOST 28853-90: Installations, instruments, devices, units, functional modules of aggregate complex of technical means for local information-controlling systems (KTS LIUS). General requirements

GOST 28953-91: Photosensitive charge transfer device. Measuring methods for parameters

GOST 29024-91: Turbidimetric and nephelometric liquid analyzers

GOST 29065-91: Tanks for milk

GOST 29125-91: Programmable controllers

GOST 29226-91: Viscometers for liquids

GOST 29328-92: Stationary gas turbines for turbo generators. General technical requirements

GOST 30315-95: Electric drills and components. Safety requirements.

GOST 30331.3-95: Electrical installations of buildings. Part 4. Protection for safety. Protection against electric shock

GOST 30373-95: Electromagnet compatibility of technical means. Test equipment. Shielded chambers. Classes, basic parameters, technical requirements and test methods

GOST 30379-95: Electromagnetic compatibility of technical means of protection fire-alarm and fire-protection systems. Requirements, standards and methods of tests on interference immunity and industrial interference

GOST 30414-96: Weighbridges for weighing of vehicles in motion. General technical requirements

GOST 30540-97: The equipment for manufacture of products from cellular autoclaved concrete. General specifications and control methods

GOST 30823-2002: Fodders, compound feeds and feed additives. Determination of the elementary composition by means of atomic emission method.

GOST 31335-2006: Technological foundry equipment. Equipment for shot shooting, shot blasting and shot shooting-blasting treatment. Safety requirements

GOST 31382-2009: Copper. Methods of analysis

GOST 31411-2009: Ammonium perrenat. Specifications

GOST 31481-2012: Mixed fodders, raw stuff for mixed fodders. Method for determining the residual quantities of chlorine-organic pesticides

GOST 31521-2012: Food рrocessing machinery. Сutting machines for meat. Specifications

GOST 31522-2012: Food processing machinery. Dough and pastry brakes. Specifications

GOST 31523-2012: Food processing machinery. Dough mixers. Specifications

GOST 31524-2012: Food processing machinery. Moulders. Specifications

GOST 31525-2012: Food processing machinery. Band saw machines. Specifications

GOST 31527-2012: Food processing machinery. Intermediate provers. Specifications

GOST 31528-2012: Machines and equipment for munufacturing of sugar. Safety requirements

GOST 31529-2012: Machinery and equipment for bread baking industry. Safety requirements

GOST 31535-2012: Electrical thermal equipment. General test methods

GOST 31591-2012: Gearmotors of general purposes. General specifications

GOST 31593-2012: Machines and equipment for wood industrial low landings. Safety requirements. Control methods

GOST 31674-2012: Feeds, compound feeds, material for compound feeds. Methods for the determination of common toxicity

GOST 31812-2012: Civil aviation aircraft and helicopter ground support equipment. General technical requirements

GOST 31817.1.1-2012: Alarm systems. Part 1. General requirements. Section 1. General

GOST 31827-2012: Liquid centrifugal separators. Safety requirements. Test methods

GOST 31829-2012: Ozonization equipment. Safety requirements

GOST 31833-2012: Biotechnical industries equipment. Vegetable materials hydrolysis apparatus. Fermenters. Safety requirements. Test methods

GOST 31836-2012: Industrial centrifuges. Safety requirements. Test methods

GOST 32216-2013: Special railway rolling stock. General technical requirements

GOST 32221-2013: Copper concentrates. Methods of analysis

GOST 32520-2013: Iron ores, concentrates, agglomerates and pellets. General requirements to the methods of chemical analyses

GOST 32663-2014: Polymer composite components of the pumps for special purpose. Specifications

GOST 32699-2014: Moulded side frame and bolster beam of two-axle three-piece bogies for freight wagons of 1520 mm gauge railways. Methods of non-destructive testing

GOST 33012-2014: Propane and butane for sale. Determination of the hydrocarbon composition by gas chromatography

GOST 33145-2014: Public roads. Road mirrors. Methods of control

GOST 33447-2015: Packaging. Determination of formaldehyde concentration in air

GOST 33448-2015: Packaging. Determination of acetaldehyde and acetone by gas chromatography in model media

GOST 33466-2015: Global navigation satellite system. Accident emergency response system. Methods of testing the device / system for calling emergency operational services for compliance with the requirements of electromagnetic compatibility, resistance to climatic and mec

GOST 33467-2015: Global navigation satellite system. Road accident emergency response system. Functional test methods for in-vehicle emergency call device/system and data transfer protocols

GOST 33469-2015: Global navigation satellite system. Accident emergency response system. Methods of testing the device / system for calling emergency operational services to meet the requirements for determining the moment of the accident

GOST 33470-2015: Global navigation satellite system. Accident emergency response system. Test methods for the wireless modules of the emergency service device / system

GOST 33471-2015: Global navigation satellite system. Accident emergency response system. Test methods for the navigation module of the device / emergency service emergency call system

GOST 33474-2015: Satellite navigation equipment for mounting on wheeled vehicles. Test methods for compliance with electrical safety, climatic and mechanical requirements

GOST 33738-2016: Agricultural and forestry machinery with electric drive. General safety requirements

GOST 33798.5-2016: Railway applications. Electric equipment for rolling stock. Part 5. Electrotechnical components. Rules for HV fuses

GOST 33976-2016: Welded joints in steel structures of railway rolling stock. Requirements for design, implementation and quality control

GOST 34058-2017: Internal buildings and structures utilities. Mounting and start-up adaptive control of air-conditioning evaporative and condensing units. General technical requirements

GOST 34062-2017: Railway traction substations, transformer substations and power supply linear devices. Safety requirements and control methods

GOST 34183-2017: Оil and oil products trunk pipeline transportation. Oil centrifugal pumps. General specifications

GOST 34433-2018: Trunk pipelines for oil and oil products transportation. Transformer complete substations with voltage from 35 to 220 kV. General specifications

GOST 34439-2018: Veterinary preparation, feed, feed additive. Determination of antioxidants by high-performance liquid chromatography with spectrophotometric detection

GOST 34564-2019: The main pipeline transport of oil and oil products. Gear pumps. General specifications

GOST 34565-2019: The main pipeline transport of oil and oil products. Piston and plunger pumps. General specifications

GOST 34589-2019: Hoisting cranes. Overhead and gantry cranes. General technical requirements

GOST 34606-2019: Medicines for veterinary use, feed, feed additives. Method for determining the content of aromatic components using gas-liquid chromatography with flame ionization detection

GOST 34773-2021: Systems for technical diagnostics and monitoring of high-speed railway lines. General technical requirements

GOST 464-79: Grounds for stationary telegraph and telephone installations, wire-broadcasting distribution points, radio-relay stations and CATV antennas. Resistance norms

GOST 6012-2011: Nickel. Methods of the chemical and atomic emission spectrographic analysis.

GOST 6012-78: Nickel. Methods of chemical-atomic-emission spectral analysis

GOST 6012-98: Nickel. Methods of chemical-atomic-emission spectral analysis

GOST 6134-2007: Rotodynamic pumps. Test methods

GOST 6134-87: Rotor-dynamic pumps

GOST 6482-2011: Ferroconcrete nonpressure pipes. Technical specifications.

GOST 6815-79: Mains and distribution busways up to 1000 V a.c. General specifications

GOST 7524-2015: Steel grinding balls for ball mills. Specifications.

GOST 7890-84: Travelling single-girder suspended cranes. Specifications

GOST 7890-93: Travelling single girder suspended cranes. Specifications

GOST 8.331-99: State system for ensuring the uniformity of measurement. Distortion meters. Methods and means of verification and calibration

GOST 8.616-2013: State system for ensuring the uniformity of measurements. Laboratory and stream chromatographs for control of component composition Liquefied hydrocarbon fuel gases. The method of verification

GOST 8339-84: Oil pressure installations for hydraulic turbines

GOST 8776-2010: Cobalt. Methods of chemical-atomic-emission spectral analysis

GOST 8776-99: Cobalt. Methods of chemical-atomic-emission spectral analysis

GOST 9.024-74: Unified system of corrosion and ageing protection. Rubbers. Methods of heat ageing stability determination

GOST 9.026-74: Unified system of corrosion and ageing protection. Vulcanized rubber. Method of accelerated determination to ozone and thermolightozone resistance

GOST 9.030-74: Unified system of corrosion and ageing protection. Vulcanized rubbers. Method of testing resistance to attack by corrosive media in limp state

GOST 9.068-76: Unified system of corrosion and ageing protection. Sealants. Test methods for resistance to attack by liquid corrosive media

GOST 9.070-76: Unified system of corrosion and ageing protection. Vulcanized rubbers. Test methods for resistance to attack by liquid corrosive media at static compressive strain

GOST 9.302-88: Unified system of corrosion and ageing protection. Metal and non-metal inorganic coatings. Control methods

GOST 9.313-89: Unified system of corrosion and ageing protection. Metal and non-metal inorganic coatings on the plastics. General requirements and technological operations

GOST 9.704-80: Unified system of corrosion and ageing protection. Vulcanized rubbers. Methods of determination of the packing parts for the fixed joints working capacity during the radiation-thermal ageing

GOST 9.712-86: Unified system of corrosion and ageing protection. Adhesives. Test methods of adhesive bonds of rubber with rubber-fabric materials and metals for resistance to the influence of liquid aggressive media

GOST 9.913-90: Unified system of corrosion and ageing protection. Aluminium, magnesium and alloys. Methods of accelerated corrosion test

GOST 9413-78: Lighting panels for dwelling-houses. General specifications

GOST 9816.0-2014: Tellurium technical. General requirements for methods of analysis

GOST 9982-76: Rubber. Determination of stress relaxation in compression

GOST IEC 62040-3-2009: Guaranteed power supply systems. Uninterruptible power supply units. Part 3. General technical requirements. Test methods

GOST R 12.2.133-97: Occupational safety standards system. Polygraphic equipment. Safety requirements and test methods

GOST R 12.4.286-2017: Occupational safety standards system. Special clothing for protection against gases and liquid chemicals. Method for determining the protective properties of the material under the action оf chlorine and ammonia

GOST R 22.1.12-2005: Safety in emergencies. Structured system for monitoring and control of building. Construction engineering equipment. General requirements

GOST R 22.1.17-2016: Safety in emergencies. Structured system for monitoring and control of building/construction engineering equipment. System for РЎРѓommunication and РЎРѓontrol in crisis situation. General requirements

GOST R 50.05.06-2018: Conformity assessment system for the use of nuclear energy. Conformity assessment in the form of examination. Unified procedures. Magnetic particles examination

GOST R 50009-92: Electromagnetic compatibility of technical means of protection fire-alarm and fire-protection systems. Requirements, standards and methods of tests on interference immunity and industrial interference

GOST R 50012-92: Electromagnetic compatibility of technical equipment. Power electrotechnic equipment. Methods of measurement for low frequency periodical magnetic field parameters

GOST R 50059-92: Travelling single-girder suspended cranes. Specifications

GOST R 50339.0-2003: Low-voltage fuses. Part 1. General requirements

GOST R 50339.0-92: Low-voltage fuses. General requirements

GOST R 50414-92: Electromagnet compatibility of technical means. Test equipment. Shielded chambers. Classes, general parameters, technical requirements and test methods

GOST R 50514-93: Electrical relays. Insulation test

GOST R 50571.3-94: Electrical installations of buildings. Part 4. Protection for safety. Protection against elecric shock

GOST R 50612-93: Machines and equipment for manufacturing of sugar. Safety requirements

GOST R 50620-93: Machinery and equipment for bread baking industry. Safety requirements

GOST R 50714-94: Artificial leather for personal safety facilities. General specifications

GOST R 50736-95: Antenna-feeder devices of systems of land mobile radiocommunication. Types, basic parameters, technical requirements and methods of measurements

GOST R 50775-95: Alarm systems. Part 1. General requirements. Section 1. General

GOST R 50803-2008: Food processing machinery. Tanks for cooling and storage of milk in milk-trade farms and reception stations. Technical requirements and safety parameters

GOST R 50829-95: Safety of radio stations. Radio equipment containing transceivers and their elements. General requirements and test methods

GOST R 50860-2009: Aircrafts and helicopters. Antenna feeder devices of connection, navigation, landing and air traffic control. General technical requirements, parameters, methods of measurements

GOST R 50860-96: Aircraft and helicopters. Antenna feeder devices of connection, navigation, landing and air traffic control. General specification, parameters, methods of measurements

GOST R 50911-96: Agricultural machinery. Maintenance-production equipment. General safety requirements

GOST R 50968-96: Gearmotors of general purpose. General standard specifications

GOST R 51036-97: Electrooptical elements. Methods for measurement of electrooptical parameters

GOST R 51097-97: Electromagnetic compatibility of technical equipment. Radiofrequency disturbances from insulator sets and line fittings. Limits and measuring methods

GOST R 51126-98: Liquid vacuum and gravitation filters. Safety requirements and test methods

GOST R 51127-98: Liquid filters periodic action, working under pressure. Safety requirements and test methods

GOST R 51186-98: Alarm sonic passive glass break detectors for use in buildings. General technical requirements and methods of tests

GOST R 51563-2000: Liquid centrifugal separators. Safety requirements. Test methods

GOST R 51635-2000: Nuclear material radiation monitors. General specifications

GOST R 51662-2000: Commutators of transmitting antennas. Basic parameters. General technical requirements. Methods of measurements

GOST R 51663-2000: Diplexers of low frequency and medium frequency transmitters. Basic parameters. General technical requirements. Methods of measurements

GOST R 51665-2000: Power combiners for low, medium and high frequency transmitters. Basic parameters. General technical requirements. Methods of measurements

GOST R 51706-2001: Ozonisation equipment. Safety requirements

GOST R 51721-2001: Installation for thermal utilization of wastes. General test methods

GOST R 51738-2001: Biotechnical industries equipment. Vegetable materials hydrolysis apparatus. Fermenters. Safety requirements. Test methods

GOST R 51754-2001: Machines and equipment for wood industrial low landings. Safety requirements. Control methods

GOST R 51837-2001: Electrical thermal equipment. General test methods

GOST R 51918-2002: The equipment for care of coordinates through the vertical mine. General technical requirements and test methods

GOST R 51931-2002: Industrial centrifuges. Safety requirements. Test methods

GOST R 52016-2003: Point-to-point radio communication MF-HF receivers. Parameters, general technical requirements and methods of measuring

GOST R 52222-2004: Fused fluxes for automatic welding. Specifications

GOST R 52337-2005: Feeds, compound feeds, material for compounds feeds. Methods for the determination of common toxicity

GOST R 52371-2005: Tin and lead babbits. Method of inductively coupled plasma atomic-emission spectrometry

GOST R 52436-2005: Control equipment of intruder and intruder-fire alarm systems. Classification. General technical requirements and test methods

GOST R 52648-2006: Machines and equipment for timber floating. Safety requirements. Control methods of safety requirements

GOST R 52687-2006: Fermented-milk product, enriched with bifidum bifidobacteria. Specifications

GOST R 52698-2006: Mixed fodders, rawstuff for mixed fodders. Method for determining the residual quantities of chlorine-organic pesticides

GOST R 52751-2007: Steel-fibro-concrete slabs for bridge spans. Specifications

GOST R 52860-2007: Physical protection systems. General technical requirements

GOST R 52906-2008: Equipment of the aviation fuelling system. General technical requirements

GOST R 53055-2008: Agricultural and forestry machinery with the electric drive. General safety requirements

GOST R 53140-2008: Food processing machinery. Intermediate provers. Specifications

GOST R 53192-2008: Welded steel structures of freight cars. Technical requirements

GOST R 53192-2014: Welded joints in steel structures of railway rolling stock. Requirements for design, production and quality control

GOST R 53198-2008: Ores and concentrates of non-ferrous metals. General requirements for methods of chemical analysis

GOST R 53237-2008: Fiber glass. General requirements for safety in the course of Production and Application

GOST R 53367-2009: Combustible natural gas. Determination of sulphur-containing components using chromatographic method

GOST R 53473-2009: Food processing machinery. Moulders Specifications

GOST R 53474-2009: Food processing machinery. Band saw machines. Specifications

GOST R 53476-2009: Food processing machinery. Cutting machines for meat. Specifications

GOST R 53477-2009: Food processing machinery. Dough and pastry brakes. Specifications

GOST R 53478-2009: Food processing machinery. Dough mixers. Specifications

GOST R 53527-2009: Digital Video Broadcasting (DVB). Specifications to realization of security system DVB Simulcrypt at head stations. Basic parameters. Technical requirements

GOST R 53530-2009: Digital broadcasting television. Access networks with active network terminals. Basic parameters. Technical requirements

GOST R 53531-2009: Digital video broadcasting (DVB). Requirements to information protection from non-authorized access in the cable and terrestrial television broadcast networks. Basic parameters. Technical requirements

GOST R 53543-2009: Aircraft and helicopter ground support equipment. General technical requirements

GOST R 53734.5.1-2009: Electrostatics. Protection of electronic devices from electrostatics phenomena. General requirements

GOST R 53896-2010: Food processing machinery. Pasta processing dryers and coolers. Safety and hygiene requirements

GOST R 53978-2010: Special railway rolling stock. General technical requirements

GOST R 54317-2011: Launching and technical complexes of space-rocket complexes. Safety requirements

GOST R 54320-2011: Food processing machinery. Rotary rack ovens. Safety and hygiene requirements

GOST R 54321-2011: Food processing machinery. Centrifugal machines for processing edible oils and fats. Safety and hygiene requirements

GOST R 54369-2011: Unified system of standards of computer control systems. Engineering, manufacturing and bringing into operation of the control systems of electrical equipment for supply of workflow of movement of ships through newly reproduced, reconstructed and subjecte

GOST R 54403-2011: Stationary gas turbines for drive of turbogenerators. General specifications

GOST R 54404-2011: Gas pumping units driven with gas turbine. General specifications

GOST R 54418.1-2012: Renewable power engineering. Wind power engineering. Wind turbines. Part 1. Technical requirements

GOST R 54418.2-2014: Renewable power engineering. Wind power engineering. Wind turbines. Part 2. Design requirements for small wind turbines

GOST R 54433-2011: Renovable power engineering. Wind power plants. Maintenance safety requirements

GOST R 54435-2011: Wind power plant constructions. Base safety requirements

GOST R 54484-2011: Liquefied hydrocarbon fuel gases. Method for determination of hydrocarbon composition

GOST R 54618-2011: Global navigation satellite system. Road accident emergency response system. Compliance test methods of in-vehicle emergency call system/device for electromagnetic compatibility, environmental and mechanical resistance requirements

GOST R 54716-2011: Broadcasting Digital System DRM at frequency bands below 30 MHz Monitoring receiver. Basis parameters and technical requirements

GOST R 54718-2011: Digital broadcasting system DRM in the frequency range less than 30 MHz Digital encoder-modulator. Basis parameters and technical requirements

GOST R 54775-2011: Powered support pumping stations. General technical requirements. Test methods

GOST R 54787-2011: Nanodimensional processing of precision details. Production requirements

GOST R 54919-2012: Concentrates lead. Methods for the determination of gold and silver

GOST R 54921-2012: Zink concentrates. Atomic emission spectroscopy with inductively coupled plasma. Determination of copper, lead, cadmium, iron, aluminium, cobalt, antimony, manganese, arsenic and indium

GOST R 54922-2012: Zink concentrates. Technical specification

GOST R 54968-2012: Food processing machinery. Mixing machines. Safety and hygiene requirements

GOST R 54969-2012: Food processing machinery and equipment. Equipment for pasta pressing. Safety and hygiene requirements

GOST R 54971-2012: Food processing machinery. Spreaders, stripping and cutting machines, stick return conveyors, stick magazines. Safety and hygiene requirements

GOST R 54972-2012: Food processing machinery and equipment. Filling machines and auxiliary machines. Safety and hygiene requirements

GOST R 55005-2012: Renewable power engineering. Geothermal power plants. Safety requirements under operation

GOST R 55152-2012: Mining equipment. Mobile armoured face conveyors. General technical requirements and test methods

GOST R 55156-2012: Mining equipment. Mine belt stage loader. General technical requirements and test methods

GOST R 55168-2012: Stationary gas turbine plants' air intake ducts. General technical requirements

GOST R 55196-2012: Gas turbines of low capacity for turbogenerators. General technical requirements

GOST R 55532-2013: Global navigation satellite system. Road accident emergency response system. Test methods of in-vehicle emergency call system crash detection feature

GOST R 55533-2013: Global Navigation Satellite System. Road accident emergency response system. Test methods for wireless communication module of in-vehicle emergency call system

GOST R 55534-2013: Global navigation satellite system. Road accident emergency response system. Test methods for navigation module of in-vehicle emergency call system

GOST R 55558-2013: Sulphide copper-nickel ore. Mass-spectrometry method for determination of platinum, palladium, rhodium, ruthenium, iridium and cold content with preliminary collecting for nickel matte

GOST R 55610-2013: Oil measuring systems. General specifications

GOST R 55658-2013: Panels wall with the wooden framework. Specifications

GOST R 55686-2013: Real-time audio-visual information system (RAVIS). Digital modulator. Basic parameters and technical requirements

GOST R 55687-2013: Real-time audio-visual information system (RAVIS). Monitoring receiver. General technical requirements

GOST R 55688-2013: Real-time audio-visual information system (RAVIS). Content composer. Structure and data transmission protocols

GOST R 55853-2013: Medium speed roller mill. Types, critical parameters, specification

GOST R 55882.5-2013: Railway applications. Electric equipment for rolling stock. Part 5. Electrotechnical components. Rules for HV fuses

GOST R 56093-2014: Information protection. Protected operational systems. Means of detection of purposeful powerful electromagnetic impacts. General requirements

GOST R 56115-2014: Information protection. Protected operational systems. Means of protection against purposeful powerful electromagnetic impacts. General requirements

GOST R 56151-2014: Digital Video Broadcasting. Test receiver of a second generation digital terrestrial television broadcasting system (DVB-T2). BasiC parameters. Technical requirements

GOST R 56161-2014: Digital Video Broadcasting. Modulator of a second generation digital terrestrial television broadcasting system (DVB-T2). Basic parameters. Technical requirements

GOST R 56171-2014: Digital Video Broadcasting. Gateway of a second generation digital terrestrial television broadcasting system (DVB-T2). Basis parameters. Technical requirements

GOST R 56363-2015: Global navigation satellite system. Satellite navigation equipment for mounting on wheeled vehicles. Methods of compliance testing with requirements for electrical safety, climatic and mechanical influences

GOST R 56456-2015: Digital Video Broadcasting. Integrated receiver decoder of a second generation digital satellite television broadcasting system (DVB-T2). Basic parameters. Technical requirements

GOST R 56512-2015: Non-destructive testing. Method of magnetic particle testing. Standard technological processes

GOST R 56529-2015: Electromagnetic compatibility of space technology. General requirements and test methods

GOST R 56787-2015: Polymer composites. Non-destructive testing

GOST R 57177-2016: The induction-metallurgical method of surfacing. Technological process

GOST R 57178-2016: Electric-contact method of surface hardening of details. Typical technological process

GOST R 57180-2016: Welding joints. Methods for determination of mechanical properties, macrostructure and microstructure

GOST R 57190-2016: Grounding conductors and grounding devices different purposes. Terms and definitions

GOST R 57213-2016: Electromagnetic compatibility of technical equipment. Radar absorbing composite polymer self-adhesive coating. General specifications

GOST R 57395-2017: Angle-to-digit converters. General requirements for measuring instruments, testing and monitoring of input and output parameters

GOST R 57407-2017: Carbon fibers. General technical requirements and test methods

GOST R 57484-2017: Complex system of GLONASS unified on-board equipment. Technical means controlling circumstances of any harm inflicted to vehicle as a result of road traffic accident. General technical requirements and test methods

GOST R 57485-2017: Complex system of GLONASS unified on-board equipment. Technical means controlling circumstances of any harm inflicted to vehicle as a result of road traffic accident. Functional test methods

GOST R 57566-2017: Pulp for absorbing articles from paper sanitary purposes. Specifications

GOST R 57637-2017: Food packaging grease resistant thin paper. General specifications

GOST R 57641-2017: Xerographic paper for office equipment. General specifications

GOST R 57642-2017: Filter paper for industrial end-use. General specifications

GOST R 57898-2017: Induction-metallurgical method of surfacing. Materials for surfacing

GOST R 57975.2-2017: Аssociated oil gas. Determination of composition by gas chromatography. Part 2. Determination of sulfur compounds using flame photometric detector

GOST R 58079-2018: Thermal-sensitive paper for printing devices. General specifications

GOST R 58106-2018: Paper for office equipment. Specifications

GOST R 58176-2018: Electric industry. Energy construction. Organisation of commissioning of thermal power plants. General requirements

GOST R 58177-2018: United power system and isolated power systems. Thermal power plants. Thermal-mechanical equipment of thermal power plants. Control of condition of metal. Norms and requirements

GOST R 58232-2018: Railway infrastructure objects. Complex protection against lightning and transient surges. General requirements

GOST R 58234-2018: Traction rolling stock. Cleaning and washing requirements

GOST R 58320-2018: Electrical installation of traction power supply systems of the DC railway. Grounding Requirements

GOST R 58321-2018: Electrical installation of traction power supply systems of the AC railway. Grounding Requirements

GOST R 58323-2018: Reinforced concrete pipes for trenchless laying of engineering networks. Technical conditions

GOST R 58432-2019: Laser hardening of mechanical engineering parts. Technological process

GOST R 58604-2019: Unified energy system and isolated energy systems. Thermal power plants. Automated process control systems. Terms of creation. Norms and Requirements

GOST R 58611-2019: Writing paper. General specifications

GOST R 58786-2019: Electrical equipment for nuclear power plants. General technical requirements

GOST R 58819-2020: Pipe fittings for trunk oil pipelines and oil product pipelines. Rules for assessing the technical condition and extension of assigned indicators

GOST R 58858-2020: Alarm systems. Aerosol systems. General technical requirements and test methods

GOST R 58867-2020: Instrument rolling bearings. Methods for measuring the hardness of bearing parts

GOST R 58868-2020: Instrument rolling bearings. Deviation from the roundness of the surfaces of the parts. Measurement procedure

GOST R 58882-2020: Grounding devices. Potential equalization systems. Earthing switches. Grounding conductors. Technical requirements

GOST R 58934-2020: Plants for the manufacture of reinforced concrete volume blocks of sanitary cabins and elevator shafts. Specifications

GOST R 70084-2022: Cardboard for phase preservation of cultural monuments on a cellulose base. General specifications

GOST R 8.686-2009: State system for ensuring the uniformity of measurements. A.C. balanced bridges. Verification methods

GOST R 8.903-2015: State system for ensuring the uniformity of measurements. Mass of petroleum and petroleum products. Procedures of measurements

GOST R 8.908-2015: State system for ensuring the uniformity of measurements. Measuring instruments of volume flow of oil and oil products. Tests, verification and calibration with provers

I 23 SD-80*: Instructions for flaw detection of pipe bends made of pearlite steel

IN 4-7-92: Index of regulatory and technical documents (as of 01.03.92)

Indication O-1515u: Recommendations for planning labor protection measures in railway transport

IOT RZhD-4100612-CDRP-021-2013: Occupational safety instructions for the bulldozer operator

IOT RZhD-4100612-TsDRP-024-2013: Instructions for labor protection for an electric gas welder (when traveling)

KPO 01.03.11-06: Catalog-list of equipment. Power plants and power plants. Guaranteed power installations. Converters

M 15-2019: Recommendation. General requirements for analysis methods

M61900: Recommended Practice for Grounding and Electrical Safety Measures in Electric Power Facilities With Voltage up to 1 kV in Industrial Facilities

Manual: Manual for impulse and low consumption fire extinguishing systems

Manual for SNiP 3.05.01-85: Manual for the production and acceptance of work when installing ventilation and air conditioning systems

MDS 12-11.2002: Procedures Manual for SNIP 12-03-2001 "Occupational Safety and Health in Construction. Part 1: General Requirements" for Occupational Safety and Health Training and Testing of Supervisors and Specialists in Construction

MDS 12-16.2003: Recommended Practice for the Development of Local Regulations (Proprietary Standards) for Use in an Occupational Safety and Health Management Systems in a Construction Organization

MDS 12-22.2005: Recommendations for the application in the construction industry of the requirements of regulatory legal and other regulatory acts containing state regulatory labor protection requirements

MDS 12-29.2006: Guidelines for the development and execution of the flow chart

MDS 12-40.2008: Recommendations for the preparation of a project for the installation of scaffolding

MDS 12-44.2008: Recommendations for drafting work on the construction of a railway track tower crane

MDS 12-45.2008: Recommendations for drafting a project for the installation and operation of a tower crane

MDS 12-48.2009: Winter concreting with the use of heating wire

MDS 12-52.2009: In situ pile construction

MDS 12-57.2010: Installation of scaffolding on high-rise buildings. Project of work production

MDS 12-58.2011: Scaffolding. Manufacturing, installation, operation

MDS 12-60.2011: Production design for installation of steel structures of buildings

MDS 12-61.2012: The project for the production of works on the device of a rail track of a tower crane with a concrete beam BRP-62.8.3

MDS 12-62.2012: The project of the installation of a protective screen from parts of scaffolding

MDS 12-68.2015: Work Project. The device rail track tower crane

MGSN 4.19-2005: Temporary norms and standards for design of multifunctional high-rise buildings and buildings complexes in Moscow. Part 2. (Part 1 is sold separately as MGSN 4.19-05)

MI 1201-86: Guidelines. State system for ensuring uniformity of measurements. Sequence Spectrum Analyzers. Method of verification

MI 1515-86: Guidelines. State system for ensuring uniformity of measurements. Rail flaw detector GSP.MD-22FD-11E. Method of verification

MI 1778-87: Methodical instructions. State system for ensuring uniformity of measurements. Dynamic workload. Methodology for measuring the energy costs of a worker

MI 1839-88: Guidelines. State system for ensuring uniformity of measurements. Transducers primary pyrometric full radiation exemplary 3rd category. Method of verification

MI 2229-92: State system for ensuring uniformity of measurements. Incandescent light-emitting lamps, model and working lamps. Methods of metrological certification and verification

MI 2419-97: Recommendation. State system for ensuring uniformity of measurements. Modular measuring converters. Verification Method

MI 2728-2002: State system for ensuring uniformity of measurements. The list of regulatory documents on security requirements. The order of their application in the normative documents of the ICE

MI 2825-2003: Oil quantity and quality ratio measurement system. Metrological and technical design requirements

MI 2971-2006: Recommendation. State system for ensuring uniformity of measurements. Technique and technology of works during calibration, calibration and adjustment of car scales using weighing car A-300

MI 2986-2006: Recommendation. State system for ensuring uniformity of measurements. Scales for static weighing according to GOST 29329-92 with LEL up to 600 kg with the automated workplace of the verifier (ARMP) manufactured by OOO Mera, Moscow. Method of verification

MI 3372-12: Recommendation. State system for ensuring uniformity of measurements. Oil product pipeline. Systems for measuring the quantity and quality of petroleum products. General technical and metrological requirements

MI 390-87: Guidelines. GSE. Levels are electronic. Method of verification

MP OCSM 084196-2019: GSI. Channels measuring instruments for monitoring the neutron flux of the initiating part of the control and protection system of the BARS-4 research nuclear installation

MP OCSM 084196-2019: GSI. Channels measuring instruments for monitoring the neutron flux of the initiating part of the control and protection system of the BARS-4 research nuclear installation

MU OT RM 02-99: Assessment of the safety of workplaces for their certification of working conditions

NB ZhT TsP 035-99: Special railway rolling stock. Safety standards

NB ZhT TsT 01-98: Diesel train Safety Standards Change №1

NB ZhT TsT 02-98: Diesel locomotives. Safety regulations

NB ZhT TsT 03-98: Electric trains. Safety Standards. Amendments №1-4

NPB 192-2000: Fire engineering. Communnication and lighting truck. General technical requirements. Test methods

NPB 88-2001*: Fire extinguishing and alarm systems. Norms and design rules

NTP TsTKS-FZhT-2002: Standards for technological design of digital telecommunication networks in the federal railway transport

NTP-APK 1.10.13.003-03: Technological design standards for pesticide stores

ODM 218.2.014-2011: Guidelines for the use of steel-fiber-concrete in the repair of bridge structures

Order 1317: The list of documents in the field of standardization, as a result of which, on a voluntary basis, compliance with the requirements of the Federal Law of July 22, 2008 No. 123-FZ "Technical Regulations on Fire Safety Requirements" is ensured

Order 1573: The list of national standards and sets of rules, as a result of which, on a voluntary basis, compliance with the requirements of the Federal Law of July 22, 2008 No. 123-FZ "Technical Regulations on Fire Safety Requirements" is ensured

Order 832: The list of documents in the field of standardization, as a result of which, on a voluntary basis, compliance with the requirements of the Federal Law of July 22, 2008 No. 123-FZ "Technical Regulations on Fire Safety Requirements" is ensured

OST 1-42172-83: Control of protective environment during welding of parts from titanium alloys

OST 26-07-2051-82: Pipeline fittings. Climatic tests methods.

OST 32.146-2000: Devices of railway automation, telemechanics and telecommunications. General specification requirements

OST 35-09-86: Hoisting machinery and equipment. General specifications.

OST 36-100.2.03-84: Occupational safety standards system. Labour saving tools. Installation tools and devices. General safety and ergonomics requirements.

OST 36-100.3.06-85: Occupational safety standards system. Special works on the erection of high-level reinforced concrete structures. Safety requirements.

OST 36-100.3.13-85: Labour safety standard system. Processing equipment installation. General safety requirements.

OST 45.131-99: The joint of the optical synchronous digital hierarchy transmission system. Parameter measurement methods

OST 45.183-2001: stationary Installations of Electrical power of electrical connection apparatus. General technical requirements.

OST 45.50-96: Automatic container telephone exchanges. General technical requirements.

OST 45.56-96: Types, basic parameters, technical requirements

OST 45.77-97: Terrestrial stations transmitting feeder lines of satellite systems for direct television broadcasting. Main settings. Measurement methods

OST 45.97-97: Equipment echo and ehocompensation for communication lines. Types, basic parameters, technical requirements

OST 45.98-98: VSAT type ground stations for sattelite communication networks

OST 48-41-91: Engineering products of non-ferrous metallurgy. General Specifications.

OST 51.141-86: Combustible natural gases. Manometric method of preparation of calibration gas mixture

OTT 08042462: Instruments and automation equipment for nuclear power plants. General technical requirements

PB 08-389-00: Safety Rules for Gas Processing Plants Production

PB 11-219-98: Safety Requirements in Coke Byproducts Operations

PI 1.4.75-2000: Arc welding in shielding gases of structural, stainless and heat-resistant steels and alloys

PNAE G-7-014-89: Standardized methods of testing of basic materials (semifinished products, weld joints and surfacing of equipment and piping of npp. Ultrasonic inspection. Part I. Control of basic materials (semifinished products)

PNST 159-2016: Automatic information and measuring system of commercial accounting of electric energy. General specifications

PNST 164-2016: Electric equipment for nuclear power plants. General technical requirements

POT R M-002-97: Intersectoral rules on labor protection in foundry

POT R M-003-97: Intersectoral rules on labor protection when performing forging and pressing

POT R M-005-97: Intersectoral labor protection rules for heat treatment of metals

POT R M-006-97: Intersectoral labor protection rules for cold metal processing

POT R M-011-2000: Intersectoral rules on labor protection in public catering

POT R M-013-2000: Industry-Wide Occupational Safety and Health Requirements for Chemical Cleaning and Washing

POT R M-014-2000: Intersectoral Occupational Safety Rules

POT R M-015-2000: Intersectoral labor protection regulations for the operation of freon refrigeration units

POT R M-017-2001: Inter-Industry Occupational Safety and Health Regulations for Painting Operations

POT R M-018-2001: Intersectoral labor protection rules when applying metal coatings

POT R M-019-2001: Intersectoral rules for labor protection in the production of acetylene, oxygen, the process of spraying and gas-plasma processing of metals

POT R M-022-2002: Intersectoral rules on labor protection during soldering and tinning of products

POT R O 00030171: Labor protection rules during the operation of navigable hydraulic structures

POT R O 13153-ZhDRM-946-03: Industry rules on labor protection during factory repair of locomotives and freight cars

POT R O 97300-12-97: Labor protection regulations in the beer and non-alcoholic food industry

POT R O-001-2002: Rules on labor protection for printing organizations

POT R O-00-97: Occupational Safety and Health Requirements in the Pulp and Paper and Rosin Industry

POT R O-112-001-95: Rules for labor protection during the operation of oil depots and gas stations

POT R O-112-002-98: Rules for labor protection during the operation of trunk oil pipelines

POT R O-13153-TsSh-877-02: Industry rules for labor protection during maintenance and repair of signaling, centralization and blocking devices on federal railway transport

POT R O-200-01-95: Rules on labor protection in automobile transport

POT R O-29-002-94: Occupational Safety Rules for Publishers

POT R O-29-003-95: Occupational Safety Rules for Bookstores

POT R O-32-CV-400-96: Labor protection rules for the maintenance and repair of freight cars and refrigerated rolling stock

POT R O-32-TsT-668-99: Rules for labor protection during maintenance and current repair of traction rolling stock and cranes on the railway

POT R O-97300-016-98: Rules on labor protection. Beekeeping

POT R O-97300-03-95: Occupational Health and Safety Rules

POT R O-97300-05-95: Rules for labor protection in food concentrate and vegetable drying industries of the food industry

POT R O-97300-06-95: Rules for labor protection in the sugar industry of the food industry

POT R O-97300-07-95: Rules for labor protection in the production of alcohol and alcoholic beverages

POT R O-97300-08-96: Rules on labor protection in animal husbandry. Pig breeding

POT R O-97300-09-96: Rules on labor protection in animal husbandry. Sheep and goat breeding

POT R O-97300-10-96: Rules on labor protection in animal husbandry. Horse breeding

POT R O-97300-13-97: Occupational Safety and Health Requirements in Poultry Farming

POT R O-97300-14-97: Rules on labor protection in animal husbandry. Fur farming

POT RO-13153-TsL-923-02: Industry rules for labor protection in the passenger sector of the federal railway transport

POT RO-13153-TsM-933-03: Industry rules for labor protection in the economy of freight and commercial work on the federal railway transport

POT RO-32-TsP-652-99: Rules for labor protection during the maintenance and repair of railway tracks and structures

POT RZhD 4100612-CT-613-2015: Temporary rules on labor protection during the operation of prototypes of the TEM19 gas locomotive and the GT1h gas turbine locomotive

POT RZhD 4100612-CTR-062-2015: Temporary rules on labor protection during maintenance and current repair of prototypes of the TEM19 gas locomotive and the GT1h gas turbine locomotive

POT RZhD 4100612-TsSh-074-2015: Rules for labor protection during maintenance and repair of signaling, centralization and blocking devices at Russian Railways

POT RZhD-4100612-TsP-TsDRP-022-2013: Rules for labor protection, environmental, industrial and fire safety during maintenance and repair of infrastructure facilities of the railway complex of JSC Russian Railways

PPBO-157-90: Fire Safety Regulations in the Timber Industry

PUE: Electrical Installation Rules (PUE). Chapter 1.1 General (Seventh Edition)

PUE: Electrical Installation Rules (PUE). Chapter 1.2 Electricity supply and electrical networks (Seventh edition)

PUE: Electrical Installation Rules (PUE). Chapter 1.7 Grounding and Electrical Safety Precautions (Seven Edition)

PUE: Electrical Installation Rules (PUE). Chapter 1.9 Insulation of electrical installations (Seventh edition)

PUE: Electrical Installation Rules (PUE). Chapter 7.6 Electric Welding Machines (Seven Edition)

PUE: Electrical Installation Rules (PUE). Chapter 7.10. Electrolysis Plants and Plating Plants (Seventh Edition)

PUE: Electrical Installation Rules (PUE). Chapter 1.8. Acceptance Test Standards (Sixth Edition)

PUE: Electrical Installation Rules (PUE). Chapter 4.1. Switchgears up to 1 kV AC and up to 1.5 kV DC (Sixth Edition)

PUE: Electrical Installation Rules (PUE). Chapter 1.1. General part (Sixth edition)

PUE: Electrical Installation Rules (PUE). Chapter 1.2. Electricity supply and electrical networks (Sixth edition)

PUE: Electrical Installation Rules (PUE). Chapter 1.3. Selection of conductors by heating, economic current density and by corona conditions (Sixth edition)

PUE: Electrical Installation Rules (PUE). Chapter 1.4. Selection of electrical devices and conductors for short circuit conditions (Sixth edition)

PUE: Electrical Installation Rules (PUE). Chapter 1.5. Electricity metering (Sixth edition)

PUE: Electrical Installation Rules (PUE). Chapter 1.6. Electrical Measurements (Sixth Edition)

PUE: Electrical Installation Rules (PUE). Chapter 1.7. Grounding and Electrical Safety Precautions (Sixth Edition)

PUE: Electrical Installation Rules (PUE). Chapter 2.1. Electrical Wiring (Sixth Edition)

PUE: Electrical Installation Rules (PUE). Chapter 2.2. Busducts up to 35 kV (Sixth Edition)

PUE: Electrical Installation Rules (PUE). Chapter 2.3. Cable lines with voltage up to 220 kV (Sixth edition)

PUE: Electrical Installation Rules (PUE). Chapter 2.4. Overhead power lines with voltage up to 1 kV (Sixth edition)

PUE: Electrical Installation Rules (PUE). Chapter 2.5. Overhead power lines with voltage above 1 kV (Beginning) (with Amendments and additions) (Sixth edition)

PUE: Electrical Installation Rules (PUE). Chapter 3.1. Protection of electrical networks with voltage up to 1 kV (Sixth edition)

PUE: Electrical Installation Rules (PUE). Chapter 3.2. Relay Protection (Sixth Edition)

PUE: Electrical Installation Rules (PUE). Chapter 3.3. Automation and telemechanics (Sixth edition)

PUE: Electrical Installation Rules (PUE). Chapter 3.4. Secondary Circuits (Sixth Edition)

PUE: Electrical Installation Rules (PUE). Chapter 4.2. Switchgears and substations with voltages above 1 kV (Sixth edition)

PUE: Electrical Installation Rules (PUE). Chapter 4.3. Converter substations and installations (Sixth edition)

PUE: Electrical Installation Rules (PUE). Chapter 4.4. Battery Units (Sixth Edition)

PUE: Electrical Installation Rules (PUE). Chapter 5.1. Electrical machine rooms (Sixth edition)

PUE: Electrical Installation Rules (PUE). Chapter 5.2. Generators and Synchronous Compensators (Sixth Edition)

PUE: Electrical Installation Rules (PUE). Chapter 5.3. Electric motors and their switching devices (Sixth edition)

PUE: Electrical Installation Rules (PUE). Chapter 5.4. Crane Electrical Equipment (Sixth Edition)

PUE: Electrical Installation Rules (PUE). Chapter 5.5. Elevator Electrical Equipment (Sixth Edition)

PUE: Electrical Installation Rules (PUE). Chapter 5.6. Condensing Units (Sixth Edition)

PUE: Electrical Installation Rules (PUE). Chapter 6.1. General part (Seventh edition)

PUE: Electrical Installation Rules (PUE). Chapter 7.1. Electrical equipment of residential, public, administrative and domestic buildings (Seventh edition)

PUE: Electrical Installation Rules (PUE). Chapter 6.2. Interior lighting (seventh edition)

PUE: Electrical Installation Rules (PUE). Chapter 6.3. Outdoor lighting (Seventh edition)

PUE: Electrical Installation Rules (PUE). Chapter 6.4. Advertising Lighting (Seventh Edition)

PUE: Electrical Installation Rules (PUE). Chapter 6.5. Lighting fixtures, installation devices (Seventh edition)

PUE: Electrical Installation Rules (PUE). Chapter 7.2. Electrical installations of entertainment enterprises, clubs and sports facilities (Seventh edition)

PUE: Electrical Installation Rules (PUE). Chapter 7.3. Electrical Installations in Hazardous Areas (Sixth Edition)

PUE: Electrical Installation Rules (PUE). Chapter 7.4. Electrical Installations in Fire Hazardous Zones (Sixth Edition)

PUE: Electrical Installation Rules (PUE). Chapter 7.5. Electrothermal Plants (Sixth Edition)

PUE: Electrical Installation Rules (PUE). Chapter 7.6. Electric welding machines (sixth edition)

PUE: Electrical Installation Rules (PUE). Chapter 7.7. Peat electrical installations (Sixth edition)

PUE: Electrical Installation Rules (PUE). Chapter 2.5. Overhead power lines with voltages above 1 kV (End) (Sixth edition)

PUE: Electrical Installation Rules (PUE). Applications

PUE: Electrical Installation Rules (PUE). Chapter 6.6. Lighting devices and wiring devices (Seventh edition)

PUE: Electrical Installation Rules (PUE). Chapter 6.1. General part (Sixth edition)

PUE: Electrical Installation Rules (PUE). Chapter 6.2. Interior lighting (Sixth edition)

PUE: Electrical Installation Rules (PUE). Chapter 6.3. Outdoor Lighting (Sixth Edition)

PUE: Electrical Installation Rules (PUE). Chapter 6.4. Advertising Lighting (Sixth Edition)

PUE: Electrical Installation Rules (PUE). Chapter 6.5. Lighting fixtures, installation devices (Sixth edition)

PUE: Electrical Installation Rules (PUE). Chapter 7.1. Electrical Equipment for Residential and Public Buildings (Sixth Edition)

PUE: Electrical Installation Rules (PUE). Chapter 7.2. Electrical equipment for entertainment enterprises, clubs and sports facilities (Sixth edition)

PUE: Electrical Installation Rules (PUE). Chapter 2.4. Overhead power lines with voltage up to 1 kV (Seventh edition)

PUE: Electrical Installation Rules (PUE). Chapter 2.5. Overhead power lines with voltage above 1 kV (Seventh edition) (with Amendment)

PUE: Electrical Installation Rules (PUE). Chapter 4.1. Switchgears up to 1 kV AC and up to 1.5 kV DC (Seventh Edition)

PUE: Electrical Installation Rules (PUE). Chapter 4.2. Switchgears and substations with voltages above 1 kV (Seventh edition)

PUE: Electrical Installation Rules (PUE). Chapter 1.8. Acceptance test standards (Seventh edition)

R 466-82: Guidelines for conducting induction training on labor protection in organizations and enterprises of the Ministry of Oil and Gas Industry

R 470-82: Safety Guide and Special Issues of Industrial Sanitation in Construction of Main Pipelines in Western Siberia

R 50-601-21-92: Recommendations. Establishment of product safety requirements in standards and technical conditions

R 78.36.008-99: Design and Installation of Security Intercom and Closed Circuit Television Systems. Recommended Practice

RD 102-011-89: Occupational Safety and Health. Management and Procedural Documents

RD 12.23.102-85: Mountain cars. Method for establishing values of noise and vibration characteristics

RD 153-34.0-04.185-2003: Machines and equipment for construction, technical re-equipment and repair of energy facilities. Requirements for design, materials, manufacturing, acceptance and testing

RD 153-34.1-11.320-00: Natural Gas. Methods for Measurement of Quality Ratings of Gaseous Fuel Supplied to Thermal Power Stations

RD 153-34.1-30.106-00: Rules for technical operation of gas-handling facilities for gas-turbine and combined-cycle units at thermal power plants

RD 153-34.1-35.127-2002: General technical requirements for program and technical complex for technological process automated control system of thermal power plant

RD 153-34.1-35.137-00: Technical requirements for microprocessor technology based process protection subsystem

RD 153-34.3-03.285-2002: Safety Requirements for Construction of Electric Power Transmission Lines and Electrical Installation Work

RD 22-207-88: Lifting machines. General requirements and production standards

RD 24.200.13-90: Seamless steel pipes. Methodic of uniformity incoming ultrasonic control.

RD 26-11-08-86: Welded Joints. Mechanical Tests

RD 26-11-87: Instructions on acoustic methods for monitoring the structure and mechanical characteristics of gray and high-strength cast irons

RD 31.30.10-83: Manual on technological design of coastal enterprises and radio communication facilities of the Ministry of the Navy

RD 31.83.04-89: Labour safety rules in companies of the Ministry of Navy of the USSR.

RD 32-CSR-110/34-03: Guidance document. Labor protection during the operation of buildings and structures and the repair and construction work at railway facilities

RD 34.03.201-97: Safety Code for the Operation of the Thermo mechanical Equipment of Electric Power Stations and Heat Networks.

RD 34.17.427-89: Procedural Guidelines. Nondestructive Testing at Thermal Power Stations. General Requirements

RD 34.30.106-95: Guidelines for the design of gas supply system with the addition of natural gas up to 0.5 MPa for gas turbine and combined cycle thermal power plants of RAO "UES of Russia", 08/24/95

RD 34.35.310-97: General Technical Requirements for Microprocessor-Based Protective Relaying and Automation Devices of Power Systems

RD 34.44.102-97: Guidance on the design of farms for liquid fuel for gas turbine and combined cycle power plants of TPP RAO "UES of Russia", 08/25/97

RD 39-0147103-338-88: Temporary standards for the design of electric heating above-ground main pipelines (Axial electric heating system of ASE)

RD 45.093-97: General technical requirements for a terrestrial station for satellite communications lines operating with a satellite in geostationary orbit in the frequency bands 6/4 GHz and 14/11-12 GHz

RD 45.155-2000: Grounding and potential equalization of FOCL equipment at wired communication facilities

RD 45.158-2000: Automatic digital long-distance telephone stations for use on an interconnected communication network of the Russian Federation. General technical requirements

RD 45.162-2001: Complexes of cellular and satellite mobile communication public networks.

RD 45.191-2001: Call Service Centers. General technical requirements

RD 45.192-2001: Rules for technical maintenance for satellite lines

RD 45.298-2002: Equipment for analog trunked mobile radio systems. General technical requirements

RD 45.380-2003: Devices for combining signals from several connected transmitters of the VHF and UHF bands. General technical requirements

RD 45.382-2003: Stationary transmitting antennas for radio communications in the MF, HF, VHF and UHF bands. General technical requirements

RD 50-700-91: Guidelines. Industrial particle accelerators. General requirements for the measurement of parameters

RD 51-0158623-07-95: The use of a new generation of power plants with a piston and gas turbine drive

RD 78.143-92: Security alarm systems and sets elements of technical reinforcement of sites, design standards

RD EO 0505-03: Instructions for metal styloscope

RD IATs 2.004-97: Passenger and freight elevators. Guidelines for testing insulation resistance, protective earth and loop phase-zero

RD RosJeK 10-KM-03: Rules for the design, construction and manufacture of hoisting cranes

RD RosJeK 10-KR-01: Rules for the design, construction and manufacture of hoisting cranes

RD RosJeK 10-PV-02: Rules for the design, construction and manufacture of hoists (towers)

Recommendations: Aspiration smoke-sensitive alarms VESDA. Part 1. Scope

RM 4-249-91: Process automation systems. Device grounding networks. Allowance for the BCH 205-84/MMSS USSR

RMD 31-04-2008 Sankt-Peterburg: Recommendations for construction of residential and public high-rise buildings

RMD 32-24-2015 Sankt-Peterburg: Design of artificial structures at transport facilities in St. Petersburg

RMG 101-2010: State system for ensuring the uniformity of measurements. Petroleum quantity and parameters of quality measurements systems. Metrological and technical specifications to the designing

R-SSK 05-2016: Recommendations on the procedure, rules for the development, coordination and approval of work projects using lifting structures

Rules 00-97: Rules for Occupational Safety and Health in the Pulp and Paper and Forestry Industries (final)

SNiP 3.05.06-85: Electrical devices

SO 34.03.355-2005: Methodological instructions for ensuring fire and explosion safety during operating power gas turbine electric power units.

SO 34.20.514-2005: Guidelines for the operation of the gas economy of thermal power plants

SO 34.23.501-2005: Guidelines for the operation of fuel oil facilities of thermal power plants

SO 34.35.146-2003: Guidelines for the creation of automated process control systems for water treatment plants (TLU) power plants

SO 34.35.677-2003: Technical requirements for the automated control system for gas-oil-fired boiler burners to enhance explosion safety during ignition of burners

SP 12-133-2000: Safety in construction. Statutes on the procedure for certification of work stations by working conditions in construction and housing and utilities.

SP 226.1326000.2014: Power supply of not traction consumers. Rules for design, construction and renovation

SP 241.1311500.2015: Fire protection systems. Automatic water extinguishing systems for high rack storages. Designing and regulations rules

SP 265.1325800.2016: Manifold for engineering networks

SP 42-103-97: Renovation of steel underground gas pipelines used synthetic flexible pipes and complicated adhesiyes

SP 485.1311500.2020: Fire protection systems. Automatic fire extinguishing installations. Norms and rules of design

SP 5.13130.2009: Fire protection systems. Automated fire alarm and fire extinguishing installations. Design norms and regulations

ST CKBA 097-2019: Pipe fittings. Test methods for resistance to climatic external factors

ST RK 1447-2005: Pre-stressed reinforced concrete sleepers for railway with gage 1520 mm. General specification

ST SSFZhT TsSh 095-2003: LED signaling devices for railway transport. Typical methods of certification tests.

STB 1208-2000: Construction and finishing machines. General safety requirements. Test methods

STB 1523-2005: Grain. Relative starch content determining method

STB 1568-2005: Occupational safety standards system. Printing equipment. Safety requirements and test methods

STO 1.1.1.07.001.0675-2008: Atom stations. Equipment, instruments, means of monitoring and control systems. General technical requirements

STO 1.1.1.07.001.0675-2017: Atom stations. Equipment, instruments, means of monitoring and control systems. General technical requirements

TsE-191: Instructions for grounding power supply devices on electrified railways

TU 2245-010-44271562-2004: Tape, heat-shrinkable polyethylene radiation-modified "Therma-L"

TU 2245-017-44271562-2005: Polymer tape "Terma-P". Technical conditions

TU 2293-004-44271562-2004: Cuff the thermosetting "Terma-STMP"

TU 3631-002-76457067-2012: Dynamic Pumps and Pump Units MST-TsN type and spare parts for them

TU IShBZh.801571.191: Machine lentotkatsky shuttle dvuhtsovy brand TL-2/70

VMU-20-90: Temporary guidelines for the development of technical specifications for the creation of automated process control systems

VNTP 01-87: Guidelines for Process Design of Pasta Industry Facilities

VNTP 02-92: Norms of technological design of bakery industry enterprises. Part I. Bakeries

VNTP 02-92: Norms of technological design of bakery industry enterprises. Part II Bakeries

VNTP 51-1-88: Industry norms of technological design of Installations for Production and Storage of Liquefied Natural Gas, Isothermal Storages and Gas Filling Stations

VRD 39-1.8-055-2002: Standard design specification for compressor stations (CS), booster compressor stations (BCS) and compressor stations of underground gas storage facilities (CS UGSF)

VSN 203-84: Safety Requirements for the Construction of Hi-Rise Reinforced Concrete Structures

VSN 332-93: Design Guidelines for Electrical Installations for Telecommunication, Cable Broadcasting, and Radio and Television Broadcasting Facilities and Structures

Customers Who Viewed This Item Also Viewed:

Petroleum for oil-processing plants. Specifications
Language: English
Price: $18.00
Industrial gas burners. General technical requirements
Language: English
Price: $152.00
Electrical articles. General requirement for environment mechanical stability
Language: English
Price: $28.00
Rules of Electrical Installations Design (Russian Electrical Code). 7th Edition. All sections and exhibits
Language: English
Price: $478.76
Power transformer on-load tap-changing devices. General specifications
Language: English
Price: $167.00
Conical pipe thread. Profile, basic dimensions and tolerances
Language: English
Price: $71.00
Glass and glass products. Visual faults. Terms and definitions
Language: English
Price: $158.00
Industrial gas burners. Test methods
Language: English
Price: $204.00
Glass and glass products. Inspection methods for geometric parameters and appearance
Language: English
Price: $110.00
Weldable deformed reinforcing rolled products of A500C and B500C classes for reinforcement of concrete constructions. Specifications
Language: English
Price: $112.00
Crude petroleum. General specifications
Language: English
Price: $58.00
Power transformers. Test methods of tap changing devices
Language: English
Price: $626.00
Unified system for design documentation. Stages of designing
Language: English
Price: $71.00
White sugar. Specifications
Language: English
Price: $279.00
Stainless steels and corrosion resisting, heat-resisting and creep resisting alloys. Grades
Language: English
Price: $215.00
Rolled of normal, increased - and high-strength steel for shipbuilding. Specifications
Language: English
Price: $1,639.74
Guidelines for the photometric determination of hydrogen sulfide in the air
Language: English
Price: $62.00
Tempered glass. Specifications.
Language: English
Price: $149.00
Glass with low emissivity hard coating. Specifications.
Language: English
Price: $212.00
Glass laminated. Specifications.
Language: English
Price: $231.00

YOUR ORDERING MADE EASY!

RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.

Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.

We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.

Placing Your Order

Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).

Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.

For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.

For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.

Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.

Your Order Best Quality and Authenticity Guarantee

Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).

We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.

We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.

All Codes and Regulations

All Categories

Send us a message Expand Collapse

Leave your message in the form below, and we will write back by e-mail!