Hand arc welding. Acute and blunt weld joints. Main types, design elements and dimensions
Ручная дуговая сварка. соединения сварные под острыми и тупыми углами Основные типы, конструктивные элементы и размеры
Status: Effective - Supersedes. The limitation of effectiveness has been lifted: Decree of the State Standard No. 696 dated 05.16.91
The standard establishes the main types, structural elements and dimensions of welded joints of structures made of carbon and low alloyed steels, performed by manual arc welding with consumable electrode in all spatial positions with the thickness of the metal being welded up to 60 mm inclusive with the location of the welded parts at acute and obtuse angles. The standard does not establish the types, structural elements and dimensions of welded joints of pipelines and welds performed by deep penetration welding.
Стандарт устанавливает основные типы, конструктивные элементы и размеры сварных соединений конструкций из углеродистых и низколегированных сталей, выполняемых ручной дуговой сваркой плавящимся электродом во всех пространственных положениях при толщине свариваемого металла до 60 мм включительно с расположением свариваемых деталей под острыми и тупыми углами. Стандарт не устанавливает типы, конструктивные элементы и размеры сварных соединений трубопроводов и сварных швов, выполняемых сваркой с глубоким проплавлением.
Format: Electronic (pdf/doc)
Page Count: 24
Approved: State Committee of Standards of the Council of Ministers of the USSR,
The Product is Contained in the Following Classifiers:
Construction (Max) »
Other state standards used in construction »
25 Mechanical Engineering »
Welding regulations »
Welding work »
Welding regulations »
Welding regulations »
Welding materials »
Welding regulations »
Welding regulations »
ISO classifier »
25 MECHANICAL ENGINEERING »
25.160 Welding, brazing and hard soldering »
25.160.40 Welds and welding »
National standards »
25 MECHANICAL ENGINEERING »
25.160 Welding, brazing and hard soldering »
25.160.40 Welds and welding »
National Standards for KGS (State Standards Classification) »
Latest edition »
V Metals and metal products »
V0 General rules and regulations on metallurgy »
V05 Welding and cutting of metals. Soldering, riveting »
National Standards for OKSTU »
SYSTEMS OF GENERAL TECHNICAL AND ORGANIZATIONAL-METHODOLOGICAL STANDARDS »
One-piece connections (welding, riveting, soldering, etc.) »
As a Replacement Of:
GOST 11534-65: Seams of welded connections. Manual arc welding. Basic types and structural elements (at a sharp and obtuse angle)
The Document is Referenced By:
DiOR 05: Methodology of diagnosing of technical condition and determining of residual life of process equipment of oil refineries and petrochemical plants
GOST 12367-85: Tube mills of grinding units. General technical specifications
GOST 12393-2013: Line fittings for overhead system of railways. General common requirements
GOST 12393-2019: Rail contact network fittings linear. General specifications
GOST 13276-79: Overhead line hardware. General specifications
GOST 13531-74: Concrete placers for precast reinforced concrete factories
GOST 13981-77: Forms for reinforced concrete pressure pipes made by vibrohydropressed method. Specifications
GOST 16140-77: Collapsible racks. Specifications
GOST 17032-2010: Horizontal steel tanks for petroleum products. Specifications
GOST 18103-84: Installations for manufacturing reinforced concrete three-dimensional elements of sanitary engineering cabins and lift shafts. Specifications
GOST 22130-2018: Steel piping details. Movable supports and hangers. Specifications
GOST 22130-86: Steel Pipeline Parts
Movable supports and suspensions
GOST 23074-85: Fertilizer placers for liquid organic fertilizers
GOST 23118-2012: Building steel structures. General specifications
GOST 23118-99: Steel construction structures
General Technical Specifications
GOST 23476-79: Tramway and trolleybus overhead trolley wire supporting devices. General specifications
GOST 23484-79: Electrohydraulic-plants for removing of cores. Technical requirements
GOST 23518-79: Cas-shielded arc welding. Welded joints. Main types, design elements and dimensions
GOST 24259-80: Assembling equipment for temporary fastening and adjusting structural members of building. Classification and general technical requirements
GOST 25781-2018: Steel molds for the manufacture of reinforced concrete products. Technical specifications
GOST 25781-83: Steel moulds for reinforced concrete members. Specifications
GOST 25878-2018: Steel molds for the manufacture of reinforced concrete products. Pallets Technical specifications
GOST 25878-85: Steel moulds for reinforced concrete members. Pallets. Construction and dimensions
GOST 27204-87: Steel moulds for reinforced concrete members. Sides. Construction and dimensions
GOST 29166-91: Mechanical attractions. Steel structures. Principal rules of the design
GOST 31173-2003: Steel doors. Specifications
GOST 31174-2003: Gates of metall. General specifications
GOST 31174-2017: Gates of metall. General specifications
GOST 31824-2012: Fibrous mist eliminators. Types and main parameters. Safety requirements. Methods of testing
GOST 31826-2012: Gas cleaning and dust catching equipment. Bag filters. Wet dust catching equipment. Safety requirement. Methods of testing
GOST 31830-2012: Electrostatic precipitators. Safety requirement and methods of testing
GOST 31831-2012: Centrifugal dust collectors. Safety requirement and methods of testing
GOST 31834-2012: Adsorptive gas cleaners. Safety requirements and test methods
GOST 31837-2012: Abcorptive gas purifiers. Safety requirements and test methods
GOST 31841-2012: Petroleum and natural gas industries. Well service equipment. General technical requirements
GOST 31844-2012: Petroleum and natural gas industries. Drilling and production equipment. Hoisting equipment. General technical equipments
GOST 32947-2014: Automobile roads of general use. Supports of stationary electric lighting. Technical requirements
GOST 32949-2014: Automobile roads of general use. Supports of stationary electric lighting. Control methods
GOST 32955-2014: Public roads. Trays for road drainage. Technical specifications
GOST 33164.1-2014: Mining equipment. Longwall powered roof shocks. Section of support. General specifications
GOST 33857-2016: Pipe fittings. Welding and quality control of welded joints. Technical requirements
GOST 33976-2016: Welded joints in steel structures of railway rolling stock. Requirements for design, implementation and quality control
GOST 34011-2016: Gas distribution systems. Block gas delivery stations. Cabinet gas delivery stations. General technical requirements
GOST 34329-2017: Formworks. General specifications
GOST 34433-2018: Trunk pipelines for oil and oil products transportation. Transformer complete substations with voltage from 35 to 220 kV. General specifications
GOST 34587-2019: Hoisting cranes. Metal constructions. Manufacturing requirements
GOST 5464-75: Pontoons of pressure floating mud pipelines and pipelines. General specifications
GOST 7075-80: Manual Traveling Underrunning Cranes Specifications
GOST 7496-84: Beet harvesters
GOST 7623-84: Outdoor drainage pipes. Specification
GOST 7890-84: Travelling single-girder suspended cranes. Specifications
GOST 7890-93: Travelling single girder suspended cranes. Specifications
GOST R 50059-92: Travelling single-girder suspended cranes. Specifications
GOST R 50821-95: Fibrous mist eliminators. Their types and main parameters. Safety requirements. Methods of testing
GOST R 51177-2017: Overhead line hardware. General technical requirements
GOST R 51177-98: Overhead line hardware. General specifications
GOST R 51562-2000: Gas cleaning and dust catching equipment. Bag filters. Wet dust catching equipment. Safety requirement. Methods of testing
GOST R 51707-2001: Electrostatic precipitators. Safety requirement and methods of testing
GOST R 51708-2001: Centrifugal dust collectors. Safety requirement and methods of testing
GOST R 51878-2002: Adsorptive gas cleaners. Safety requirements and test methods
GOST R 52085-2003: Formworks. General specifications
GOST R 52170-2003: Mechanized attractions safety. Principal rules of the design of steel constructions
GOST R 52445-2005: Absorptive gas purifiers. Safety requirements and test methods
GOST R 53192-2008: Welded steel structures of freight cars. Technical requirements
GOST R 53192-2014: Welded joints in steel structures of railway rolling stock. Requirements for design, production and quality control
GOST R 53680-2009: Petroleum and natural gas industries. Well service equipment. General technical requirements
GOST R 53683-2009: Petroleum and natural gas industries. Drilling and production equipment. Hoisting equipment. General technical rudiments
GOST R 54892-2012: Installation of air separation plants and other cryogenic equipment. General provisions
GOST R 54960-2012: Gas distribution systems. Block gas delivery stations. Cabinet gas delivery stations. General technical requirements
GOST R 55525-2017: Storage systems. Adjustable pallet racking. General specifications
GOST R 56204-2014: Steam and hot-water stationary boilers. Steel structures. General operating specification
GOST R 56400-2015: Petroleum and natural gas industries. Design and operation of offshore terminals of liquefied natural gas. General requirements
GOST R 57381-2017: Storage systems. Hand loaded steel static shelving. General specifications
GOST R 58174-2018: Basket trolleys. Specifications
GOST R 58249-2018: Machines for planting, harvesting, post-harvest processing of potatoes. Technical requirements
GOST R 58863-2020: Production tables. Metal workbenches. General specifications
GOST R 58864-2020: Tool cabinets made of metal. General specifications
GOST R 58934-2020: Plants for the manufacture of reinforced concrete volume blocks of sanitary cabins and elevator shafts. Specifications
ITN 93: Instructions for technical supervision, methods of audit and rejection of tube furnaces, tanks, vessels and apparatuses of oil refining and petrochemical industries
Manual: Manual for impulse and low consumption fire extinguishing systems
Manual for SNiP II-23-81*: Manual on the design of steel structures of overhead power lines (VL) power transmission towers and outdoor switchgears (outdoor switchgear) of substations with voltages above 1 kV
Manual for SNiP II-23-81*: Strength Design Guide for Steel Structures
Manual for SNiP II-23-81*: Steel Structural Engineering Tutorial
MDS 12-41.2008: Assembly equipment for temporary fixing of prefabricated elements of erected and dismantled buildings
OST 108.033.01-86: mechanical stokers. Technical conditions.
OST 153-34.0-969-99A: Assembly units and parts of the supports of the station pipelines of nuclear power plants Py <= 4.0 MPa (40 kgf/cm2). General technical requirements
OST 153-34.0-969-99А: Assembling units and support station pipeline details of nuclear power plants. Nominal pressure is no more than 4,0 MPa. General technical requirements.
OST 153-34.0-971-99A: Assembly units and support parts of the station piping of nuclear power plants Py <= 4.0 MPa (40 kgf/cm2). Sleeve for passage through the roof. Design and dimensions
OST 153-34.0-984-99A: Assembly units and suspension parts of nuclear power plant station pipelines Py <= 4.0 MPa (40 kgf/cm2). General technical requirements
OST 24.050.34-84: Wagon steel structures design and production. Specifications.
OST 24.940.09-74: Welded joint seams. Main types and design elements.
OST 26.260.758-2003: Metal structures. General technical requirements.
OST 26-04-2388-79: Welding by melting of the steels. Welded connections. Types, constructive elements and dimensions.
OST 26-3-87: Welding in chemical mechanical engineering. Main provisions.
OST 34-10-621-93: Welded branches bearing. Types and basic dimensions.
OST 36-146-88: Bearings for steel industrial pipelines for P 10 MPa. Specifications.
OST 36-58-81: Steel building structures. Welding. Basic requirements.
OST 36-60-81: Welding at installation of steel building constructions. Main provisions.
OST 36-62-81: Hoisting equipment. General technical requirements.
OST 95 10440-2002: Equipment for radioactive environments. Welded joints. Types and dimensions and structural elements.
OTU 3-01: Vessels and apparatuses. General specifications for the repair of buildings
PB 03-381-00: Regulations of installation of vertical cylindrical steel reservoirs (steel scroll tanks) for petroleum and petroleum products
PGVU 021-92: Unified dust and air duct elements. Welded assemblies of blocks and elements of ducts of dust and gas air ducts of thermal power plants. Design and dimensions
PNAE G-10-031-92: Basic provisions for localizing safety system elements welding on nuclear stations
RD 059/01-2019: Instructions for welding and surfacing during the repair of freight cars (with Amendment No. 1)
RD 10-138-97: Thorough Inspection of Rail Crane Tracks of Hoisting Machinery. Part 1: General Provisions. Procedural Guidelines
RD 153-34.0-04.185-2003: Machines and equipment for construction, technical re-equipment and repair of energy facilities. Requirements for design, materials, manufacturing, acceptance and testing
RD 22-207-88: Lifting machines. General requirements and production standards
RD 22-326-97: Self-propelled jib cranes and loader cranes. Overhaul. General technical conditions
RD 26.260.010-2002: The leading document on standardization. The list of standard documentation on standardization on the cells and devices working under pressure.
RD 26.260.010-97: List of Regulatory Documents on Standardization for Pressure Vessels and Apparatus
RD 32 TsV-056-97: Freight cars of 1520 mm gauge railways. Quick Release Guide
RD 34 02.028-2007: Technical rules. Mechanical equipment and special steel structures for hydraulic structures. Manufacturing, installation and acceptance.
RD 34.10.130-96: Instructions for visual and measuring control.
RD 34.15.132-96: Welding and Quality Control of Welded Joints in Metal Structures of Buildings During Construction of Industrial Facilities
RD 36-62-00: Hoisting equipment. General technical requirements.
RD 5.0679-91: Certification of welders and gas cutters. rules
RD NIIKranostroeniya 03-05: Guidelines. Jib cranes for general use and cranes; Overhaul. General specifications
RD RTM 38.14.006-86: Method for determining the service life of the coils of catalytic reforming furnaces that have worked out the project resource
RTM 108.940.08-85: Welded structures of power equipment. General requirements for structural and process design
RTM 24-85: Information index of state, republican and industry standards, technical specifications for materials and products used in the design of furnaces and dryers
SNiP 3.03.01-87: Bearing and enclosing structures
SP 16.13330.2011: Steel structures
SP 294.1325800.2017: The construction of steel. Design rules
SP 46.13330.2012: Bridges and pipes
SP 470.1325800.2019: Steel structures. Work Rules
SP 53-101-98: Manufacturing and quality control of steel structures for construction
SP 53-102-2004: General rules for steel structure design
SP 70.13330.2012: Bearing and enclosing structures. Updated living edition of SNiP 3.03.01-87
ST TsKBA 025-2006: Pipe fittings. Welding and quality control of welded joints. Technical requirements
STB 1026-2008: Section metal railing for bridges and overpasses. Technical conditions
TU 3631-002-76457067-2012: Dynamic Pumps and Pump Units MST-TsN type and spare parts for them
VSN 169-80: Guidelines for Using Manual and Automated Welding in Shop-Fabrication of Structural Steel Components for Bridges
VSN 191-79: Guidelines for Machine Oxygen Cutting of Rolled Carbon and Low-Alloy Steel for Bridge Structures
VSN 41.88: Design of ice-resistant stationary platforms
Customers Who Viewed This Item Also Viewed:
Concrete with polysterene aggregates. Specifications
Steel welded vessels and apparatus. General technical conditions
Guidance on the selection of precautionary statements for the labelling in accordance with GOST 31340-2013
Billet of rotor shafts and rings of turbine generators
Vessels and apparatus. Norms and methods of strength calculation. Calculation of cylindrical and conical shells, convex and flat bottoms and covers
Seismic building design code
Aviation fuel for gas turbine engines JET A-1 (Jet A-1). Specifications
On the approval of federal norms and rules in the field of industrial safety "General explosion safety rules for explosive and fire hazardous chemical, petrochemical and oil refining industries"
Noxious substances. Classification and general safety requirements
Safety valves of stream and hot-water boilers. Technical requirements
Steam and hot-water boilers
System of ensuring of geometrical parameters accuracy in construction. Manufacturing and assembling tolerances
Manufacturing and quality control of steel structures for construction
Machines, instruments and other industrial products. Modifications for different climatic regions. Categories, operating, storage and transportation conditions as to environment climatic aspects influence
Rules of Electrical Installations Design (Russian Electrical Code). 7th Edition. All sections and exhibits
Buildings and structures foundations
Basic norms of interchangeability. General tolerances. Limit deviations for linear and angular dimensions without tolerance indications
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.