GOST 4.212-80
ГОСТ 4.212-80
|
|
Product-quality index system. Building. Concretes. Nomenclature of indices
Система показателей качества продукции. Строительство. Бетоны. Номенклатура показателей
Status: Effective
The standard applies to concrete mixes and concretes manufactured on mineral binders and mineral aggregates used in the construction of all kinds. The standard establishes a range of indicators of the quality of concrete mix and concrete, used in: the development of standards, building codes and other regulatory and technical documentation for the design and manufacture of concrete and reinforced concrete products and structures; quality forecasting and planning; development of quality management systems; reporting and quality information. Specific values, methods for determining and evaluating indicators of the quality of concrete and concrete mix should be established by the relevant standards, specifications or working drawings for concrete and reinforced concrete products and structures of certain types, as well as methodological guidelines for assessing the quality level approved in the prescribed manner. The standard was developed on the basis of and in accordance with GOST 4.200-78.
Стандарт распространяется на бетонные смеси и бетоны, изготовляемые на минеральных вяжущих и минеральных заполнителях, применяемые в строительстве всех видов. Стандарт устанавливает номенклатуру показателей качества бетонной смеси и бетона, применяемую при: разработке стандартов, строительных норм и правил, а также другой нормативно-технической документации по проектированию и изготовлению бетонных и железобетонных изделий и конструкций; прогнозировании и планировании качества; разработке систем управления качеством; составлении отчетности и информации о качестве. Конкретные значения, методы определения и оценки показателей качества бетона и бетонной смеси должны устанавливаться соответствующими стандартами, техническими условиями или рабочими чертежами на бетонные и железобетонные изделия и конструкции отдельных видов, а также методическими указаниями по оценке уровня качества, утверждаемым в установленном порядке. Стандарт разработан на основе и в соответствии с ГОСТ 4.200-78.
Choose Language:
Format: Electronic (pdf/doc)
Approved: Gosstroy of the USSR (State Committee of the Council of Ministers of the USSR for Construction),
12/29/1979
SKU: RUSS16121
The Product is Contained in the Following Classifiers:
Construction (Max) »
Regulations »
Documents System of normative documents in construction »
6. Regulatory documents for building materials and products »
k.62 Concretes and mortars »
PromExpert »
SECTION I. TECHNICAL REGULATION »
III Quality »
2 Product quality assurance »
2.2 Quality requirements for individual product properties »
2.2.1 System of indicators of product quality »
ISO classifier »
91 CONSTRUCTION MATERIALS AND CONSTRUCTION »
91.100 Building Materials »
91.100.30 Concrete and concrete products »
National standards »
91 CONSTRUCTION MATERIALS AND CONSTRUCTION »
91.100 Building Materials »
91.100.30 Concrete and concrete products »
National Standards for KGS (State Standards Classification) »
Latest edition »
Zh Construction and building materials »
Zh0 General rules and regulations for construction and building materials »
Zh01 Technical documentation. Construction drawings »
National Standards for OKSTU »
SYSTEMS OF GENERAL TECHNICAL AND ORGANIZATIONAL-METHODOLOGICAL STANDARDS »
Product quality indicators system (SPKP). Standards that determine the indicators of reliability and durability of products »
National Standards for OKSTU »
REINFORCED CONCRETE STRUCTURES AND PARTS (INCLUDING REINFORCED CONCRETE CONCRETE PRODUCTS) »
Concrete and mortars »
The Document References:
GOST 4.200-78: Quality index system. Building. General principles
The Document is Referenced By:
GOST 19222-2019: Arbolit and products from it. General specifications
GOST 19222-84: Arbolit and its products. General specifications
GOST 25214-2021: Dense silicate concrete. Technical specifications
GOST 25246-82: Chemically resistant concretes. Specifications
GOST 25485-2019: Cellular concrete. General specifications
GOST 25485-82: Cellular concretes. Specifications
GOST 25485-89: Cellular concretes. Specifications
GOST 25820-2000: Lightweight aggregates concretes. Specifications
GOST 25820-2014: Lightweight aggregates concretes. Specifications
GOST 25820-83: Lightweight concrete. Specifications
GOST 26633-2012: Heavy-weight and sand concretes. Specifications
GOST 26633-2015: Heavy-weight and sand concretes. Specifications
GOST 26633-85: Heavy-weight and sand concretes. Specifications
GOST 26633-91: Heavy-weight and sand concretes. Specifications
GOST 31357-2007: Dry bulding cement binder mixes. General specifications
GOST 31358-2007: Dry building flooring cement binder mixes. Specifications
GOST 31359-2007: Cellular autoclave curing concretes. Specifications
GOST 31360-2007: Wall unreinforced products of cellular autoclave curing concrete. Specifications
GOST 33929-2016: Concrete with polysterene aggregates. Specifications
GOST R 51263-2012: Concrete with polystyrene aggregates. Specifications
GOST R 51263-99: Concrete with polysterene aggregates. Specifications
GOST R 54854-2011: Light-weight concretes on phytogenesis organic aggregates. Specifications
GOST R 56703-2015: Dry building in-depth waterproofing capillary mixes based on cement binder. Specifications
GOST R 57255-2016: Photo catalytic self-cleaning concrete. Specifications
GOST R 58895-2020: Concrete is chemically resistant. Specifications
GOST R 58896-2020: Concrete is chemically resistant. Test methods
GOST R 70222-2022: Heavy concretes. Technical conditions
Manual: Manual for impulse and low consumption fire extinguishing systems
MDS 31-11.2007: Floor construction
SNiP 52-01-2003: Concrete and ferroconcrete structures. Principal rules
SP 369.1325800.2017: Fixed offshore platforms. Design principles
SP 52-104-2006: Steel fibre reineorced concrete structures
SP 63.13330.2012: Concrete and reinforced concrete structures. General provisions.
ST RK 1858-2008: Bridgeworks and culverts on motor roads. Requirements at designing of concrete and reinforced concrete structures
STO DOKTOR BETON 68686983-001-2011: Dry building mixtures trade mark "ДОКТОР БЕТОН®" for waterproofing and repair concrete construction. Classification. Nomenclature of indicators. Technical requirements
STO DOKTOR BETON 68686983-002-2011: Dry building mixtures trade mark "ДОКТОР БЕТОН®" for waterproofing and repair concrete construction. Technical specifications and quality characteristics
STO DOKTOR BETON 68686983-003-2011: Dry building mixtures trade mark "ДОКТОР БЕТОН®" for waterproofing and repair concrete construction. Technologies execution and methods estimation of quality
STO DOKTOR BETON 68686983-004-2014: Dry building mixtures trade mark "ДОКТОР БЕТОН®" for waterproofing and repair concrete construction.
Supplement to SP 63.13330: Toolkit. Calculation of reinforced concrete structures without prestressed reinforcement
|
Customers Who Viewed This Item Also Viewed:
 |
Cylindrical evolvent gears of external engagment. Strength calculation
Language: English |
Plastics structured-wall pipes and their fittings for sewerage systems outside the buildings. Specifications
Language: English |
Vegetable oils. General technical requirements
Language: English |
Current transformers. General specifications
Language: English |
 |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.
