GOST 10877-76

ГОСТ 10877-76

Preservative oil K-17

Масло консервационное к-17

Status: Effective - Supersedes. The limitation of effectiveness has been lifted: Decree of the State Standard No. 1834 of 11.28.91

The standard applies to conservation oil K-17 (K-17 grease) used for long-term protection of products and mechanisms stored under cover from atmospheric corrosion.

Стандарт распространяется на консервационное масло К-17 (смазку К-17), применяемое для долговременной защиты от атмосферной коррозии изделий и механизмов, хранящихся под укрытием.

Choose Language: 
Format: Electronic (pdf/doc)
Page Count: 8

Approved: Gosstandart of the USSR, 4/7/1976

SKU: RUSS16131

Price: $47.53

English keywords: industrial oils; lubricants;



The Product is Contained in the Following Classifiers:

PromExpert » SECTION I. TECHNICAL REGULATION » V Testing and control » 4 Testing and control of products » 4.9 Testing and control of chemical and industrial products » 4.9.9 Petroleum products of industrial and domestic consumption, lubricating oils and greases, plastic »

ISO classifier » 75 EXTRACTION AND PROCESSING OF OIL, GAS AND RELATED PRODUCTION » 75.100 Lubricants, industrial oils and related products »

National standards » 75 EXTRACTION AND PROCESSING OF OIL, GAS AND RELATED PRODUCTION » 75.100 Lubricants, industrial oils and related products »

National Standards for KGS (State Standards Classification) » Latest edition » B Oil products » B2 Lubricating oils » B28 Preservative oils »


As a Replacement Of:

GOST 10877-64: Conservation lube K-17. Technical requirements

The Document References:

GOST 1050-88: Carbon structural quality steel gauged bars with special surface finish. General specifications

GOST 13950-91: Welded and folded steel barrels

GOST 1461-75: Petroleum and petroleum products. Method of ash test

GOST 1510-84: Petroleum and petroleum products. Marking, packing, transportation and storage

GOST 15527-70: Copper zinc pressure treated alloys (brasses). Types

GOST 20287-91: Petroleum products Method of test for flow point and pour point

GOST 2477-65: Petroleum and petroleum products. Method for determination of water content

GOST 2517-85: Crude oil and petroleum products. Methods of sampling

GOST 26358-84: Pig iron castings

GOST 33-2000: Petroleum products. Transparent and opaque liquids. Determination of kinematic viscosity and calculation of dynamic viscosity

GOST 4784-97: Aluminium and wrought aluminium alloys. Grades

GOST 6128-81: Metal cans for chemical products

GOST 6479-73: Lubricating greases. Method for determination of mechanical impurities content by hydrochloric acid decomposition

GOST 6613-86: Square meshed woven wire gauzes

GOST 6707-76: Lubricating greases. Method for determination of free alkalies and free organic acids

GOST 9.014-78: Unified system of corrosion and ageing protection. Temporary corrosion protection of products. General requirements

GOST 9.054-75: Unified system of corrosion and ageing protection. Anticorrosive oils, greases and inhibited film-forming petroleum compounds. Accelerated test methods of protective property

The Document is Referenced By:

GOST 10160-75: Magnetically soft precision alloys

GOST 1071-81: Heat treated steel spring wire

GOST 11801-74: Foundry moulding and finishing tool. Specifications

GOST 12617-78: Ship's cargo winches. General specifications

GOST 1526-81: Steel zinc-coated wire for electrical lead and cable armoring

GOST 15598-70: Piano steel wire

GOST 15616-84: Pneumatic screw pumps for cement. General specifications

GOST 16135-70: Steel wire for calculating devices

GOST 17305-71: Wire of carbon construction steel. Specification

GOST 17305-91: Wire of carbon construction steel

GOST 17327-95: Bread baking forms

GOST 18160-72: Fasteners. Packing. Marking. Transportation and storage

GOST 21694-82: Welding mechanical equipment. General technical requirements

GOST 2172-80: Aviation steel ropes

GOST 21834-87: High-precision heavy-duty transmission roller chains

GOST 2283-79: Cold-rolled tape made of tool steel and spring steel

GOST 2284-79: Cold-rolled carbon structural steel strip

GOST 23216-78: Electrotechnical products. Storage, transportation, temporary corrosion protection and packing. General requirements and test methods

GOST 23522-79: Cold-rolled strip for hack saws. Specifications

GOST 25088-81: Ship's doors. Specifications

GOST 25938-90: Luffing-jib slewing deck-mounted cranes. General specifications

GOST 27590-2005: House-tube water-watered heat supply systems. General specifications

GOST 27590-88: Water heaters for heat supply systems

GOST 27834-88: Tool joints for drill pipers. Specifications

GOST 27834-95: Tool joints for drill pipes. Specifications

GOST 285-69: Monobasic corrugated barbed wire

GOST 28679-90: Steam-water heaters for heat supply systems

GOST 31901-2013: Pipeline valves for nuclear stations. General specifications

GOST 3282-74: General-purpose low-carbon steel wire. Specifications

GOST 33535-2015: Connections and crossings of railway tracks. Specifications

GOST 33852-2016: Pipeline valves. Knife gate valves for trunk pipelines. General specifications

GOST 34029-2016: Pipeline accessories. Check fittings for main oil pipelines and oil product pipelines. General specifications

GOST 34473-2018: Pipe fittings. Cranes spherical steel all-welded for water thermal networks. General technical conditions

GOST 3559-75: Steel band for armoring cables

GOST 3875-83: Steel card wire

GOST 4229-94: Colter knives. Specifications

GOST 4230-93: Garden knives

GOST 4727-83: Bearing wire

GOST 503-81: Cold-rolled low-carbon steel strip. Specifications

GOST 5437-85: Reed wire

GOST 5468-88: Needle wire

GOST 5663-79: Carbon steel wire for cold upsetting

GOST 7370-2015: Railway frogs. Specifications

GOST 7372-79: Steel wire for ropes

GOST 7480-73: Polygraphic wire

GOST 7751-2009: Agriculture machinery. Regulations of storage

GOST 8054-81: Metal propellers. General specifications

GOST 8117-74: Ship's bells. Specifications

GOST 9.014-78: Unified system of corrosion and ageing protection. Temporary corrosion protection of products. General requirements

GOST 9161-85: Harness wire

GOST 9389-75: Carbon steel spring wire

GOST R 55020-2012: Pipeline valves. Knife gate valves for trunk pipelines. General specifications

GOST R 55288-2012: Drill stem testing tools. Downhole and wellhead equipment. General technical requirements

GOST R 55429-2013: Hoop-in detachable joints of pipelines. Design, dimensions and general specifications

GOST R 55778-2013: Jet guns. Technical conditions

GOST R 55779-2013: Cases of cumulative punches. Technical conditions

GOST R 56001-2014: Pipeline valves for objects of gas industry. General specifications

GOST R 57420-2017: Heat recovery steam generators. Сonditions of еquipment storage, handling and preservation

GOST R 57797-2017: Hydraulic jack-pullers. General technical requirements

MI 2077-90: Micrometers with inserts

MU 34-70-106-85: Procedural Guidelines for Preservation of Standby Equipment of Stationary Electric Power Generating Stations

OST 108.020.131-85: Steam, Gas and Hydraulic Turbines. General requirements for conservation.

OST 108.988.01-82: Preservation of items of boiler production. Lubricants, inhibitors. Technical requirements.

OST 13-158-83: Wooden returnable and reusable furniture container. Technical specifications.

OST 26.260.758-2003: Metal structures. General technical requirements.

OST 5R.9527-94: Pipes and products of general purpose marine systems. Cleaning and preservation (before installation). Typical processes.

R 50-114-89: Recommendations. Unified system of technological documentation. The rules of registration of documents on the technological processes of conservation and packaging

RD 24.207.09-90: Pipe fittings. Temporary anti-corrosion protection. General requirements

RD 34.24.503-96: Model Guidelines for Operation of Individual Direct-Injection Fuel Pulverizing Systems with Bowl Mills Type MVS

RD 34.41.202: Guidelines for Installation of Feed Pumps for Units with Turbines Types K-300-240, K-500-240 and T-250/300-240

ST TsKBA 015-2005: Pipe fittings. The program of quality control of fittings of nuclear power plants

ST TsKBA 021-2004: Painting and conservation of pipeline valves and drive devices for it supplied for nuclear power plants. Typical technological instructions for cleanliness, dyeing and conservation

ST TsKBA 061-2010: Pipe fittings. Temporary anti-corrosion protection. General requirements for the choice of means and methods of protection

TU 34-10-10173-80: Mobile boiler room PKBM - 10

TU 34-38-20120-94: Pipelines of station thermal stations. General technical conditions for major repairs

TU 34-38-20188-94: Frameworks, stairs and platforms of stationary boilers. General technical conditions for major repairs

TU 34-38-20189-94: Gas-oil burners for steam stationary boilers. Technical conditions for major repairs

TU 34-38-20190-94: Burner, types pulverized steam stationary boilers. Technical conditions for major repairs

TU 34-38-20191-94: Headset stationary boilers. General technical conditions for major repairs

TU 34-38-20195-94: Fuel oil heaters of PM and PMR types. Technical conditions for major repairs

TU 34-38-20196-94: Steam heaters, water-water heat exchangers. Technical conditions for major repairs

TU 34-38-20197-94: Valves for steam and water DN 10, 20, 40, 50, 65 mm Chekhov factory of power engineering. Technical conditions for major repairs

TU 34-38-20409-94: Pulse-safety devices Chekhov factory of power engineering. General technical conditions for major repairs

TU 36-1496-85: Cable prefabricated structures. Technical conditions

TU 36-2199-79: Lifting equipment. Overhaul

TU 3645-001-05693446-98: Installation of SGN-1 supersonic gas-plasma spraying coatings

TU 3742-011-34390194-2003: Check valves DN 100-1400 PN 8, 0 MPa; PN 12, 5 MPa; PN 16, 0 MPa. Technical conditions

GOST 34595-2019: Mining engineering. Pneumatic impulse cartridges. General technical requirements. Test methods

GOST R 58684-2019: Fireproof ship doors. General specifications

RD 27.05.01-2017: Guidance document for the repair and maintenance of wheelsets with axleboxes for freight cars of 1520 (1524) mm track gauge main railways

RD 31.55.03.07-86: Restoration of cast-iron diesel pistons D100 surfacing. Typical Processes

Customers Who Viewed This Item Also Viewed:

Electromagnetic compatibility of technical equipment. Immunity of equipment for general lighting purposes to electromagnetic disturbance. Requirements and test methods
Language: English
Price: $218.25
Еlectromagnetic compatibility of technical equipment. Harmonic current emissions (equipment input current <= 16 A per phase). Limits and test methods
Language: English
Price: $410.31
Limits and methods of measurement of radio disturbance characteristics of electrical lighting and similar equipment
Language: English
Price: $714.89
Pipeline valves. General safety requirements
Language: English
Price: $213.84
Еlectromagnetic compatibility of technical equipment. Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems. Equipment with rated current <= 16 A and not subject to conditional connection. Limits and test methods
Language: English
Price: $359.87
Obosnovanie bezopasnosti oborudovaniya. Rekomendatsii po podgotovke
Language: English
Price: $67.32
Steel welded vessels and apparatus. General technical conditions
Language: English
Price: $108.90
Conformity assessment system for the use of nuclear energy. Personnel in the non-destructive and destructive testing of metal. Requirements and qualification procedure Дата введения в действие 15.03.2018
Language: English
Price: $207.90
State system for ensuring the uniformity of measurements. Verification of testing equipment. General principles
Language: English
Price: $121.77
Unified system of corrosion and ageing protection. Paint coatings. Groups of operation conditions
Language: English
Price: $158.40
Atom stations. Equipment, instruments, means of monitoring and control systems. General technical requirements
Language: English
Price: $1,146.54
System of design documents for construction. Basic requirements for design and working documentation
Language: English
Price: $867.18
Reinforcing rolled products for reinforced concrete constructions. Specifications
Language: English
Price: $298.98
Passenger cars on locomotive traction. Requirements for structural strength and dynamic qualities
Language: English
Price: $595.58
Non-destructive Testing. Welded Joints. Ultrasonic Methods
Language: English
Price: $140.58
Flanges for valves, fittings and pipelines for pressure to PN 250. Design, dimensions and general technical requirements
Language: English
Price: $293.04
Stainless steels and corrosion resisting, heat-resisting and creep resisting alloys. Grades
Language: English
Price: $212.85
Pipeline valves. Leakage rates of valves
Language: English
Price: $173.25
Compilation and execution of safety data sheet of chemical products
Language: English
Price: $175.23
Supports for Cylindrical and Conical Upright Apparatus. Types and Basic Parameters
Language: English
Price: $573.20

YOUR ORDERING MADE EASY!

RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.

Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.

We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.

Placing Your Order

Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).

Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.

For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.

For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.

Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.

Your Order Best Quality and Authenticity Guarantee

Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).

We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.

We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.

All Codes and Regulations

All Categories

Send us a message Expand Collapse

Leave your message in the form below, and we will write back by e-mail!