GOST 12.2.022-80
ГОСТ 12.2.022-80
|
|
Conveyers.
Система стандартов безопасности труда. Конвейеры. Общие требования безопасности
Status: Effective - Supersedes. The limitation of effectiveness has been lifted: Protocol No. 5-94 of the IGU dated 05.17.94 (IUS 11-12-1994)
The standard applies to conveyors, including those equipped with loading and unloading devices used in all sectors of the national economy, and establishes general safety requirements for their design and placement. The standard does not apply to conveyors intended for the transport of people, conveyors installed on ships, in mines and quarries, as well as conveyors that are integral parts (nodes) of production (technological) equipment or machinery.
Стандарт распространяется на конвейеры, в том числе оснащенные загрузочными и разгрузочными устройствами, применяемые во всех отраслях народного хозяйства, и устанавливает общие требования безопасности к их конструкции и размещению. Стандарт не распространяется на конвейеры, предназначенные для перевозки людей, конвейеры, устанавливаемые на судах, в шахтах и карьерах, а также конвейеры, являющиеся составными частями (узлами) производственного (технологического) оборудования или машин.
Choose Language:
Format: Electronic (pdf/doc)
Approved: USSR State Committee for Standards,
9/5/1980
SKU: RUSS16141
The Product is Contained in the Following Classifiers:
Construction (Max) »
Standards »
Other state standards used in construction »
13 Environmental protection, protection of people from environmental exposure. Security »
Construction (Max) »
Standards »
Other state standards used in construction »
53 Handling equipment »
Evidence base (TR CU, Technical Regulation of the Customs Union) »
010/2011 TR CU. On safety of machinery and equipment »
Regulations and standards (to ТР ТС ТС 010/2011) »
PromExpert »
SECTION III. LABOR PROTECTION AND SAFETY »
III Occupational safety requirements for production equipment and processes »
2 Safety requirements for certain types of work »
2.2 Operation of production machines and equipment »
ISO classifier »
13 ENVIRONMENTAL PROTECTION, HUMAN PROTECTION AGAINST ENVIRONMENTAL IMPACT. SECURITY »
13.100 Safety of professional activity. Industrial hygiene »
National standards »
13 ENVIRONMENTAL PROTECTION, HUMAN PROTECTION AGAINST ENVIRONMENTAL IMPACT. SECURITY »
13.100 Safety of professional activity. Industrial hygiene »
ISO classifier »
53 LIFTING AND TRANSPORT EQUIPMENT »
53.040 Continuous handling equipment »
53.040.10 Conveyors »
National standards »
53 LIFTING AND TRANSPORT EQUIPMENT »
53.040 Continuous handling equipment »
53.040.10 Conveyors »
National Standards for KGS (State Standards Classification) »
Latest edition »
T General technical and organizational and methodological standards »
T5 Documentation System »
T58 System of standards infield of nature conservation and improvement of use of natural resources, labor safety, scientific organization of labor »
National Standards for OKSTU »
SYSTEMS OF GENERAL TECHNICAL AND ORGANIZATIONAL-METHODOLOGICAL STANDARDS »
Occupational safety standards system (SSBT). Scientific organization of labor. Safety precautions. Sanitation and occupational health »
National Standards for OKSTU »
HEAVY, POWER AND TRANSPORTATION ENGINEERING PRODUCTS »
Rules for acceptance, use, operation and repair. Safety engineering »
National Standards for OKSTU »
HEAVY, POWER AND TRANSPORTATION ENGINEERING PRODUCTS »
Hoisting-and-transport equipment (conveyors) »
As a Replacement Of:
GOST 12.2.022-76: Occupational safety standards system. Conveyers. General safety requirements
The Document References:
GOST 12.1.003-83: Noise. General safety requirements
GOST 12.1.005-88: General sanitary requirements for working zone air
GOST 12.1.012-90: SSBT. Occupational Safety Standards System. Vibrational safety. General requirements
GOST 12.1.026-80: Occupational safety standards system. Noise. Determination of noise characteristics of noise sources in a free-field over reflecting plane. Engineering method
GOST 12.1.027-80: Occupational safety standards system. Noise. Determination of noise characteristics of noise sources in reverberation room. Engineering method
GOST 12.1.028-80: System of the standards for safety of work
GOST 12.2.003-91: Industrial equipment. General safety requirements
GOST 12.2.022-76: Occupational safety standards system. Conveyers. General safety requirements
GOST R 51400-99: Noise of machines. Determination of sound power levels using sound pressure. Engineering methods for small, movable sources in reverberant fields for hard - walls test rooms and for special reverberation test rooms
GOST R 51401-99: Noise of machines. Determination of sound power levels of noise sources using sound pressure. Engineering method in an essentially free field over a reflecting plane
GOST R 51402-99: Noise of machine. Determination of power levels of noise sources using sound pressure. Survey method using an enveloping measurement surface over a reflecting plane
The Document is Referenced By:
GOST 11732-78: Horizontal jigging conveyers. Specification
GOST 12.2.026.0-2015: Woodworking machinery. Construction safety requirements
GOST 12.2.026.0-93: Woodworking equipment safety requirements for design
GOST 12.2.042-2013: Occupational safety standards system. Machines and technological equipment for live-stock-raising and forage production. General safety requirements
GOST 12.2.042-91: Occupational safety standards system. Machines and technological equipment for livestock raising and forage production.
GOST 12.2.045-94: The equipment for production of rubber-technical products
GOST 12.2.046.0-2004: Technological foundry еequipment. Safety requirements
GOST 12.2.055-81: Ferrous and nonferrous scrap and waste metal processing equipment
GOST 12.2.100-84: Occupational safety standards system. Machines and equipment for manufacturing clay and lime brick, ceramic and asbestos cement products. General safety requirements
GOST 12.2.100-97: Machines and equipment for manufacturing clau and lime brick, ceramic and asbestos cement products. General safety requirements
GOST 12.2.123-90: Textile machinery
GOST 12.2.124-2013: Occupational safety standards system. Alimentary product equipment. General safety requirements
GOST 12.2.124-90: The food industry equipment
GOST 12.2.135-95: Equipment for processing of meat and poultry farming products
GOST 12.2.231-2012: Occupational safety standards system. Polygraphic equipment. Safety requirements and test methods
GOST 12.3.014-90: Occupational safety standards system. Manufacture of pressed wood shaving plates. General safety requirement
GOST 12.3.025-80: Occupational safety standards system. Metal working by cutting. Safety requirements
GOST 12.3.026-81: Occupational safety standards system. Forge-pressing. Safety requirements
GOST 12.3.027-2004: Foundry work. Safety requirements
GOST 12.3.027-81: Occupational safety standards system. Foundry work. Safety requirements
GOST 12.3.027-92: Foundry work
GOST 12.3.030-83: Occupation safety standards system. Safety requirements. Plastics processing
GOST 12.3.042-88: Occupational safety standards system. Woodworking manufacture. General safety requirements
GOST 2036-77: Vertical bucket excavators. Specification
GOST 2037-82: Auger conveyors, stationary, general purpose. General specifications
GOST 2103-78: Belt conveyors, mobile, general purpose. Specification
GOST 2103-89: General purpose mobile belt conveyors
GOST 22281-76: Plate conveyors, stationary, general purpose. Specification
GOST 27338-93: Concrete mixing plant
GOST 27945-2018: Asphalt mixing plants. General specifications
GOST 27945-95: Asphalt mixing plants
GOST 28323-89: Apron feeders
GOST 30137-95: Horizontal jigging conveyers. General specifications
GOST 31335-2006: Technological foundry equipment. Equipment for shot shooting, shot blasting and shot shooting-blasting treatment. Safety requirements
GOST 31525-2012: Food processing machinery. Band saw machines. Specifications
GOST 31526-2012: Food processing machinery. Circular saw machines. Specifications
GOST 31528-2012: Machines and equipment for munufacturing of sugar. Safety requirements
GOST 31529-2012: Machinery and equipment for bread baking industry. Safety requirements
GOST 31549-2012: Road general-purpose mobile belt conveyors. General specifications
GOST 5946-79: Conveyors, chain, suspension, load-carrying, general purpose. Specification
GOST R 12.2.133-97: Occupational safety standards system. Polygraphic equipment. Safety requirements and test methods
GOST R 50612-93: Machines and equipment for manufacturing of sugar. Safety requirements
GOST R 50620-93: Machinery and equipment for bread baking industry. Safety requirements
GOST R 51803-2001: Road general-purpose mobile belt conveyors. General specifications
GOST R 53237-2008: Fiber glass. General requirements for safety in the course of Production and Application
GOST R 53474-2009: Food processing machinery. Band saw machines. Specifications
GOST R 53475-2009: Food processing machinery. Circular saw machines. Specifications
GOST R 55156-2012: Mining equipment. Mine belt stage loader. General technical requirements and test methods
GOST R 55439-2013: Inland water transport. Operation of cargo transfer complexes and passenger terminals of river ports. Safety requirements
GOST R 57818-2017: Design standards of buildings and constructions for gas processing industry
GOST R 70517-2022: Hydrometallurgical plants of uranium mining enterprises. Norms of technological design
Indication O-1515u: Recommendations for planning labor protection measures in railway transport
Manual for SNiP 11-01-95: Guide to SNiP 11-01-95 on the development of the section of project documentation "Environmental Protection"
Manual for SNiP 11-01-95: The manual on the initial requirements for the development of design documentation for equipment of individual production (to SNiP 11-01-95)
Manual for SNiP 11-01-95: A collection of explanations of certain provisions and the contents of paragraphs of the Instructions on the procedure for the development, coordination, approval and preparation of project documents for the construction of enterprises, buildings and structures of SNiP 11-01-95 (Questions and Answers)
Manual for SNiP 11-01-95: A guide to SNiP 11-01-95 on the development of a section of project documentation "Organization and working conditions of workers. Production and enterprise management"
Manual for SNiP 2.09.03-85: Design of open crane overpasses
Manual for SNiP 2.09.03-85: Design Guide for Anchor Bolts for Securing Building Structures and Equipment
Manual for SNiP 2.09.03-85: Manual on designing stand-alone supports and overpasses for process pipelines
Manual for SNiP 2.09.03-85: Conveyor Gallery Design Guide
Manual for SNiP 2.09.03-85: Design of retaining walls and basement walls
MDS 12-11.2002: Procedures Manual for SNIP 12-03-2001 "Occupational Safety and Health in Construction. Part 1: General Requirements" for Occupational Safety and Health Training and Testing of Supervisors and Specialists in Construction
MDS 12-16.2003: Recommended Practice for the Development of Local Regulations (Proprietary Standards) for Use in an Occupational Safety and Health Management Systems in a Construction Organization
MDS 12-17.2004: Methodological manual for the joint venture 12-133-2000 Safety of labor in construction. Regulations on the procedure for certification of workplaces on working conditions in construction and housing and communal services. Expert safety assessment of non-
MDS 12-26.2006: Methodological manual for the examination of knowledge of labor protection requirements by executives and specialists of construction organizations
MDS 12-27.2006: Methodological manual for conducting labor protection training for executives and specialists of construction organizations
MDS 12-28.2006: Methodological guide for the expert assessment of the safety of non-stationary jobs at construction sites
MDS 12-35.2007: Methodological manual for the development of administrative and regulatory documentation of the labor protection management system of a construction organization
MDS 12-53.2010: Layouts of administrative and regulatory documents of the labor protection management system of a construction organization. Toolkit
NTP 10-12976-2000*: Norms of technological design of enterprises of the alcohol industry
NTP 10-12977-2000: Standards of technological design of enterprises of the alcoholic beverage industry
NTP-APK 1.10.12.001-02: Engineering Design Standards for Facilities for Storage and Processing of Potatoes and Fruit and Vegetable Products
NTP-APK 1.10.17.001-03: Standards for technological design of bases and warehouses for general-purpose enterprises for resource provision
NTP-APK 1.20.11.001-04: Standards of technological design of enterprises of the yeast industry
ONTP 02-94: Sectoral norms of technological design of enterprises in the automotive industry. Woodworking shops (sites)
ONTP 07-95: Sectoral norms of technological design of enterprises in the automotive industry. Foundries and warehouses of charge and molding materials
ONTP 09-85: All-Union norms of technological design of enterprises for the production of products from cellular and dense autoclaved concrete
ONTP 10-85: All-Union norms of technological design of production for the manufacture of products from metal powders based on iron and copper
ONTP 1-85/Minstrojdormash: All-Union norms of technological design of engineering enterprises, instrument making metallo-processing. Metalwork shops (Stocking and welding production)
ONTP 4-86: All-Union norms of technological design of transport on the surface of mining enterprises
ONTP 6-85: All-Union norms of technological design of warehouse complexes and mechanical repair shops of mines, mines and concentration plants of the mining industry
Order 498: List of questions proposed in the qualification examination for certification of experts in the field of industrial safety
OST 113-18-014-87: Occupational safety standards system. Loading and unloading operations. General safety requirements.
PB 06-227-98: Safety regulations for auxiliary workshops of mining enterprises
PB 11-242-98: Foundry Safety Requirements
PB 11-80-94: Safety Requirements in Blast Furnace Operations
POT R M-002-97: Intersectoral rules on labor protection in foundry
POT R M-003-97: Intersectoral rules on labor protection when performing forging and pressing
POT R M-005-97: Intersectoral labor protection rules for heat treatment of metals
POT R M-006-97: Intersectoral labor protection rules for cold metal processing
POT R M-007-98: Industry-Wide Occupational Safety and Health Requirements for Freight Loading/Offloading and Placement Operations
POT R M-010-2000: Intersectoral labor protection rules in the production of asbestos and asbestos-containing materials and products
POT R M-013-2000: Industry-Wide Occupational Safety and Health Requirements for Chemical Cleaning and Washing
POT R M-020-2001: Industry-Wide Occupational Safety and Health Requirements for Electric Welding and Gas Welding Operations
POT R O 29-001-93: Labor protection regulations for printing companies
POT R O 97300-12-97: Labor protection regulations in the beer and non-alcoholic food industry
POT R O-00-97: Occupational Safety and Health Requirements in the Pulp and Paper and Rosin Industry
POT R O-14000-001-98: Rules on labor protection at enterprises and organizations of mechanical engineering
POT R O-14000-004-98: Regulation
POT R O-152.31.82.03-96: Occupational health and safety regulations in seaports
POT R O-29-002-94: Occupational Safety Rules for Publishers
POT R O-29-003-95: Occupational Safety Rules for Bookstores
POT R O-45-001-94: Rules on labor protection in institutions and enterprises of the postal service and Rospechat
POT R O-97300-016-98: Rules on labor protection. Beekeeping
POT R O-97300-04-95: Rules for labor protection during storage and processing of fruits and vegetables
POT R O-97300-05-95: Rules for labor protection in food concentrate and vegetable drying industries of the food industry
POT R O-97300-06-95: Rules for labor protection in the sugar industry of the food industry
POT R O-97300-08-96: Rules on labor protection in animal husbandry. Pig breeding
POT R O-97300-09-96: Rules on labor protection in animal husbandry. Sheep and goat breeding
POT R O-97300-11-97: Rules for labor protection in the repair and maintenance of agricultural machinery
POT R O-97300-13-97: Occupational Safety and Health Requirements in Poultry Farming
POT R O-97300-14-97: Rules on labor protection in animal husbandry. Fur farming
POT RO-13153-TsL-923-02: Industry rules for labor protection in the passenger sector of the federal railway transport
POT RZhD 4100612-CTR-062-2015: Temporary rules on labor protection during maintenance and current repair of prototypes of the TEM19 gas locomotive and the GT1h gas turbine locomotive
RD 31.06.05-85: Method for the Determination of Atmospheric Emissions of Particulate Matter During Transshipment of Bulk Cargoes
RD 31.82.03-87: Labour safety rules in sea ports.
RD 34.03.201-97: Safety Code for the Operation of the Thermo mechanical Equipment of Electric Power Stations and Heat Networks.
RD 34.03.215: Safety instructions for excavation work using the hydromechanization method at the facilities of the USSR Ministry of Energy
Rules 00-97: Rules for Occupational Safety and Health in the Pulp and Paper and Forestry Industries (final)
SanPiN 2.2.3.757-99: Working with asbestos and asbestos-based materials
SNiP 12-03-99: Occupational safety in construction part one. General safety requirements
SNiP 2.09.03-85: Structures for industrial installations
SNiP 2.11.06-91: Timber Storage Facilities. Fire Protection Design Standards
SP 2.2.2.1327-03: Hygienic regulations for organization of technological processes, production equipment and working instrument
SP 343.1325800.2017: Constructions of the industrial enterprises. The rules of operation
SP 37.13330.2012: Industrial transport
SP 43.13330.2012: Structures for industrial installations
SP 89.13330.2012: Combustion boiler systems of heating generation
STB 1568-2005: Occupational safety standards system. Printing equipment. Safety requirements and test methods
VNTP 01-87: Guidelines for Process Design of Pasta Industry Facilities
VNTP 02-92: Norms of technological design of bakery industry enterprises. Part I. Bakeries
VNTP 02-92: Norms of technological design of bakery industry enterprises. Part II Bakeries
VNTP 03-91: Departmental standards of technological design of sugar beet factories. Volume 2, Part 1. Appendices
VNTP 04-94: Engineering Design Standards for Wine Bottling Plants
VNTP 05-88: Engineering Design Standards for Grain Collecting Centers and Elevators
VNTP 06-91: Departmental norms for the technological design of cement plants
VNTP 10-91: Engineering Design Standards for Breweries
VNTP 19-86: Engineering Design Standards for Farm Federations, Farm Сooperatives, and Non-Family Farm Corporations for Production of Mixed Feed
VNTP 20-86: Industry-Specific Engineering Design Standards for Ceramics Industry Facilities. Ceramic Plumbing Fixtures Manufacturing
VNTP 20m-93: Engineering Design Standards for Small-Capacity Facilities for the Production of Vegetable Oil, Sunflower Oil, and Rapeseed Oil Produced by Pressing
VNTP 21-92: Standards for technological design of enterprises of the confectionery industry
VNTP 26-94: Standards for technological design of sparkling wine factories (production of Soviet champagne using a continuous tank method)
VNTP 34-93: Engineering Design Standards for Alcohol Industry Facilities
VNTP 35-93: Engineering Design Standards for Alcoholic Beverage Plants/Distilleries
VNTP 36-92: Standards of technological design of enterprises of the food concentrate industry
VNTP 40-91: Engineering Design Standards for Nonalcoholic Beverage Plants (Shops)
VSN 13-2002: Instructions for the design of fire and explosion hazardous production of alcohol, alcoholic beverage and brandy enterprises of the food industry
VSN 214-82: Collected volume of instructions on rust-proofing
|
Customers Who Viewed This Item Also Viewed:
 |
Unified system for design documentation. Types and sets of design documentation
Language: English |
Loads and impacts
Language: English |
Vessels and Apparatus. Norms and methods of strength calculation from wind loads, seismic influence and other external loads
Language: English |
Articulated connector devices with cast male and female parts for freight cars of articulated type. General technical specifications
Language: English |
 |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.
