ODM 218.2.003-2007
ОДМ 218.2.003-2007
|
|
Recommendations for the use of polymer-bitumen binders based on SBS-type block copolymers in the construction and reconstruction of roads
Рекомендации по использованию полимерно-битумных вяжущих материалов на основе блоксополимеров типа СБС при строительстве и реконструкции автомобильных дорог
Status: Effective
The Recommendations reflect the features of the preparation and use of polymer-bitumen binders based on block copolymers of type SBS, made on the basis of alternative block copolymers and surfactants, for hot polymer-asphalt-concrete mixtures used for road pavement, bridges and aerodromes, as well as for surface treatment of surfaces and crack-breaking layers. tack coat - thin and very thin layers of coatings.
В Рекомендациях отражены особенности приготовления и применения полимерно-битумных вяжущих на основе блоксополимеров типа СБС, изготовленных на основе альтернативных блоксополимеров и ПАВ, для горячих полимерасфальтобетонных смесей, применяемых для устройства покрытий дорог, мостов и аэродромов, а также для устройства поверхностных обработок и трещинопрерывающих прослоек-подгрунтовок - тонких и очень тонких слоев покрытий.
Choose Language:
Format: Electronic (pdf/doc)
Approved: Rosavtodor,
2/1/2007
SKU: RUSS161422
The Product is Contained in the Following Classifiers:
Highways (Max) »
Design, construction, repair and maintenance of roads »
25. Road pavement »
25.3 Asphalt pavements (and others using bitumen, tar and mastic gum) »
Construction (Max) »
Regulations »
Sectoral and departmental regulatory and methodological documents »
Design and construction of roads »
ISO classifier »
93 CIVIL CONSTRUCTION »
93.080 Road construction »
93.080.20 Road construction materials »
The Document References:
GOST 10028-81: Glass capillary viscosimeters. Specifications
GOST 11501-78: Petroleum bitumen. Method for determination of depth of penetrometer needle penetration
GOST 11503-74: Petroleum bitumen. Method for the determination of viscosity
GOST 11505-75: Petroleum bitumen. Method for determination of ductility
GOST 11506-73: Petroleum bitumen. The method of the determination of softening point by ring and ball
GOST 11507-78: Petroleum bitumen. Method for determination of brittle point
GOST 11508-74: Petroleum bitumens. Methods for determination of bitumen adhesion to marble and sand
GOST 12.1.004-91: Fire safety. General requirements
GOST 12.1.007-76: Noxious substances. Classification and general safety requirements
GOST 12.1.044-89: Fire and explosion hazard of substances and materials. Nomenclature of indices and methods of their determination
GOST 12.3.002-75: Occupational safety standards system. Manufacturing processes. General safety requirements
GOST 12.4.011-89: Occupational safety standards system. Means of protection. General requirements and classification
GOST 12.4.021-75: Ventilation systems. General requirements
GOST 12801-98: Materials on the basis of organic binders for road and airfield construction. Test methods
GOST 14710-78: Petroleum toluene
GOST 1510-84: Petroleum and petroleum products. Marking, packing, transportation and storage
GOST 16557-78: Mineral powder for asphaltic-mixtures. Technical requirements
GOST 17.2.3.02-78: Regulations for establishing permissible emissions of noxious pollutants from industrial enterprises
GOST 17811-78: Polyethylene bags for chemical products. Specifications
GOST 18180-72: Petroleum bitumen. Method for determination of change of mass after hitting
GOST 19338-90: The synthetic rubber. The method for the determination of the mass loss on drying
GOST 19360-74: Film liner-bags. General specifications
GOST 20292-74: Laboratory volumetric glassware. Burettes, pipettes
GOST 20799-88: Industrial oils Specifications
GOST 21104-75: Non-destructive testing. Ferrosonde method
GOST 22245-90: Viscous petroleum road bitumens. Specification.
GOST 2226-88: Paper bags
GOST 2283-79: Cold-rolled tape made of tool steel and spring steel
GOST 24104-2001: Laboratory scales. General technical requirements
GOST 24104-88: General purpose and reference laboratory balances
GOST 2517-85: Crude oil and petroleum products. Methods of sampling
GOST 28840-90: Machines for tension, compression and bending tests of materials
GOST 31015-2002: Bituminous stone mastic mixtures and stone mastic asphalt. Specifications
GOST 3344-83: Slag crushed stone and slag sand for road construction. Specifications
GOST 3956-76: Silica gel technical. Technical conditions
GOST 400-80: Glass thermometers for testing of petroleum products. Specifications
GOST 4333-87: Petroleum products. Methods for determination of flash and ignition points in open crucible
GOST 450-77: Calcium chloride technical. Technical conditions
GOST 5789-78: Reagents. Toluene. Specifications
GOST 6613-86: Square meshed woven wire gauzes
GOST 7328-82: General-purpose and reference mass gages
GOST 8267-93: Crushed stone and gravel of solid rocks for construction works. Specifications
GOST 8420-74: Paint and lacquer materials. Method for determination of relative viscosity
GOST 8736-93: Sand for construction works. Specifications
GOST 9078-84: Flat pallets
GOST 9128-97: Asphaltic concrete Mixtures for roads and aerodromes and asphaltic concrete. Specifications
GOST 9147-80: Laboratory porcelain ware and apparatus. Specifications
GOST 9880-76: Coal and shale toluenes. Specifications
GOST R 52056-2003: Polymer-bitumen binders for roads on the basis of block copolymers of styrene-butadiene-styrene type. Specifications
GOST R 52129-2003: Mineral powders for asphaltic concrete and organomineral mixtures. Specifications
OST 218.010-98: Cementing polymer-bitumen road coating on the basis of block copolymers such as SBS. Specifications
Resolution 18-25: Temporary order of application in the construction of new, including imported materials, products and structures
SNiP 2.01.01-82: Construction climatology and geophysics
SNiP 3.06.03-85: Automobile roads
SNiP 3.06.06-88: Airports
The Document is Referenced By:
Directive 1414-r: On the invalidation of industry road methodological documents
Letter 05-32/27581: About consideration of the appeal
ODM 218.3.007-2011: Rationing of the properties of organic binders depending on climatic conditions and operating conditions of coatings
ODM 218.3.026-2012: Recommendations for the use of high-density asphalt concrete based on polymer-bitumen binders for road pavements in different climatic conditions of the Russian Federation
ODM 218.5.008-2008: Methodical recommendations on the use of a crack-interrupting layer when constructing road pavements with a polymer-asphalt-concrete coating (for experimental implementation)
Customers Who Viewed This Item Also Viewed:
|
Limit dimension deviation from 0,1 to 10000 mm and surface shape and arrangement allowances, not specified on drawings.
Language: English |
Vessels and apparatus. Norms and methods of strength calculation. General requirements
Language: English |
Norms of structural design of nuclear power plants with reactors of different types
Language: English |
Mineral fertilizers. Method for determination of dynamic strength and attrition
Language: English |
Diesel fuel EURO. Specifications
Language: English |
Inch thread with a profile angle of 55 degrees
Language: English |
|
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.