ODM 218.2.031-2013

ОДМ 218.2.031-2013

Guidelines for the use of fly ash and ash-and-slag mixtures from coal combustion at thermal power plants in road construction

Методические рекомендации по применению золы-уноса и золошлаковых смесей от сжигания угля на тепловых электростанциях в дорожном строительстве

Status: Effective

The methodical document contains recommendations on the use of fly ash and ash-and-slag mixtures from the combustion of coal in thermal power plants during the construction, reconstruction, repairs of the road bed and road pavements of public roads. Methodical document can be used in the construction, reconstruction and repair of roads of industrial and agricultural enterprises, urban roads. The provisions of this methodological document are intended for use by organizations that carry out work on the design and construction of roads.

Методический документ содержит рекомендации по применению золы-уноса и золошлаковых смесей от сжигания угля на тепловых электростанциях при строительстве, реконструкции, ремонтах земляного полотна и дорожных одежд автомобильных дорог общего пользования. Методический документ может быть использован при строительстве, реконструкции и ремонте автомобильных дорог промышленных и сельскохозяйственных предприятий, городских дорог. Положения настоящего методического документа предназначены для применения организациями, выполняющими работы по проектированию и строительству автомобильных дорог.

Choose Language: 
Format: Electronic (pdf/doc)
Page Count: 36

Approved: Federal Highway Agency, 3/4/2013

SKU: RUSS161441

Price: $500.52




The Product is Contained in the Following Classifiers:

Highways (Max) » Design, construction, repair and maintenance of roads » 25. Road pavement » 25.5 Coatings and bases of stabilized soil and materials. Use of industrial waste in road construction »

Construction (Max) » Regulations » Sectoral and departmental regulatory and methodological documents » Design and construction of roads »

ISO classifier » 93 CIVIL CONSTRUCTION » 93.080 Road construction » 93.080.10 Road construction »


As a Replacement Of:

VSN 185-75: Technical Guidelines for Roadbed and Pavement Construction Using Fly Ash and Ash-Slag Mixtures of Residue from Combustion of Various Types of Solid Fuels

The Document References:

GOST 10060.1-95: Concretes, Basic Method For The Determination Of Frost-Resistance

GOST 10178-85: Portland cement and portland blastfurnace slag cement. Specifications

GOST 10180-2012: Concretes. Methods for strength determination using reference specimens

GOST 11022-95: Solid mineral fuels. Methods for determination of ash

GOST 12536-79: Soils. Methods of laboratory granulometric (grain-size) and microaggregate distribution

GOST 12801-98: Materials on the basis of organic binders for road and airfield construction. Test methods

GOST 22245-90: Viscous petroleum road bitumens. Specification.

GOST 22266-94: Sulphate-resistant cements. Specifications

GOST 22733-2002: Soils. Laboratory method for determination of maximum density.

GOST 23227-78: Brown coals, hard coals, anthracite, combustible shales and turf. Method for the determination of free calcium oxide in the ash

GOST 23558-94: Crushed stone-gravel-sandy mixtures, and soils treated by inorganic binders for road and airfield construction. Specifications

GOST 23732-2011: Water for concretes and cement mortars Technical specifications.

GOST 25100-2011: Soils. Classification

GOST 25328-82: Masonry cement. Specifications.

GOST 25584-90: Soils. Laboratory methods for determination of filtration factor

GOST 25592-91: Mixes of fly-ash and slag of thermal plants for concretes. Specifications

GOST 25818-91: Thermal plant fly-ashes for concretes. Specifications

GOST 25951-83: Thermoshrinking polyethylene film. Specifications

GOST 26644-85: Slag crushed stone and slag sand fly-ash for concrete. Specifications

GOST 28622-2012: Soils. Laboratory method for determination of frost-heave degree

GOST 28622-90: Soils. Laboratory method for determination of frost-heave degree

GOST 30108-94: Building materials and elements. Determination of specific activity of natural radioactive nuclei

GOST 30491-2012: Organomineral mixtures and soils stabilized by organic binders for road and airfield construction. Specifications

GOST 30491-97: Organic mineral mixtures and soils stabilized by organic dinders for road and airfield construction Specifications

GOST 30515-97: Cements General specifications

GOST 310.2-76: Cements. Methods of grinding fineness determination

GOST 310.3-76: Cements. Methods of tests consistency, times of settining and of soundness

GOST 3344-83: Slag crushed stone and slag sand for road construction. Specifications

GOST 5382-91: Cements and materials for cement production. Chemical analysis methods

GOST 8269.0-97: Mauntainous rock road-metal and gravel, industrial waste products for construction works. Methods of physical and mechanical tests

GOST 8269.1-97: Mauntainous rock road-metal and gravel, industrial waste products for construction works Methods clicmical analysis

GOST 8735-88: Sand for construction work. Testing methods

GOST 9078-84: Flat pallets

GOST 9128-2009: Asphaltic concrete mixtures for roads and aerodromes and asphaltic concrete. Specifications

GOST 9179-77: Lime for building purposes. Specifications

GOST 9758-2012: Porous inorganic aggregates for construction work. Test methods

GOST 9758-86: Non-organic porous aggregates for construction work

GOST R 1.5-2012: Standardization in Russian Federation. National Standards. Rules of structure, drafting, presentation and indication

GOST R 52129-2003: Mineral powders for asphaltic concrete and organomineral mixtures. Specifications

GOST R 54096-2010: Resources saving. Waste treatment. Interconnection of requirements of Federal classification catalogue of waste and Russian classification of production

Manual: Manual for impulse and low consumption fire extinguishing systems

ODM 218.5.002-2008: Guidelines for the use of polymer geogrids (geogrids) to reinforce the pavement layers of granular materials

ODM 218.5.003-2010: Recommendations for the use of geosynthetic materials in the construction and repair of roads

ODN 218.046-01: Design of non-rigid pavement

SanPiN 2.6.1.2523-09: Norms of radiation safety

SNiP 11-02-96: Engineering surveying for construction. fundamentals

SNiP 12-03-2001: Labor safety in construction industry

SNiP 2.05.11-83: Access Roads Operated by Farm Сooperatives, Non-Family Farm Corporations, and Other Agricultural Enterprises and Organizations

SNiP 3.02.01-87: Earthen structures, foundation and basis

SNiP 3.06.03-85: Automobile roads

SP 11-109-98: Prospecting for soil building materials

SP 42.13330.2011: Urban development. Urban and rural planning and development

SP 45.13330.2012: Earth structures, bases and foundations

SP 47.13330.2012: Engineering survey for construction. Basic principles

VSN 123-77: Instruction for installation of paving and roadbeds made from crushed stone, gravel and sand materials impregnated with organic binders

VSN 182-91: Standards for Road Construction Material Surveying and the Design and Development of Near-Road Quarries for Road and Highway Construction

VSN 185-75: Technical Guidelines for Roadbed and Pavement Construction Using Fly Ash and Ash-Slag Mixtures of Residue from Combustion of Various Types of Solid Fuels

VSN 197-91: Design Guidelines for Rigid Road Pavements

VSN 19-89: Work acceptance rules for highway construction and repair

VSN 77-89: Roadbed Design and Construction Standards for Sand Deserts

VSN 8-89: Instruction for nature conservation in road construction, repair and maintenance

Federal Law 52-FZ: Public Sanitary and Epidemiological Well-Being

Federal Law 7-FZ: Environmental Protection

Federal Law 89-FZ: Production and Consumption Wastes

GOST 10180-90: Concretes. Methods for strength determination using reference specimens

Manual for SNiP 2.05.02-85: Manual on the design of methods for regulating the water-thermal regime of the upper part of the subgrade

Manual for SNiP 2.05.02-85: Guide to the design of the subgrade of roads on soft soils

Manual for SNiP 2.05.07-85: Hydraulic Vehicle Design Guide

Manual for SNiP 2.05.07-85: A guide to determining the integrated technical and economic indicators of the cost of construction for comparing options and choosing types of industrial transport

Manual for SNiP 2.05.07-85: Guide for the design of conveyor transport. Conveyor belts

Manual for SNiP 2.05.07-85: Design Guide for Industrial Rail Stations

Manual for SNiP 2.05.07-85: Manual on the design of railways and roads of industrial enterprises in permafrost areas (to SNiP 2.05.07-85)

Manual for SNiP 2.05.07-85: Guide for the design of subgrade and drainage of railways and roads of industrial enterprises

Manual for SNiP 2.05.07-85: Cable Car Design Toolkit

Manual for SNiP 3.06.03-85: Manual for the preparation and use of bitumen road emulsions

Manual for SNiP 3.06.03-85: Manual for the construction of asphalt concrete pavements and foundations of roads and airfields

Manual for SNiP 3.06.03-85: Manual for surface treatment on roads

Manual for SNiP 3.06.03-85: Manual on the construction of coatings and foundations of roads and airfields from soils reinforced with cementing materials to SNiP 3.06.03-85 and SNiP 3.06.06-88

SP 34.13330.2012: Automobile roads. Updated living edition of SNIP 2.05.02-85

The Document is Referenced By:

GOST R 56828.17-2017: Best available techniques. Resources saving. Strategies and methods for hazardous waste incineration

GOST R 58769-2019: Roads with low traffic. Rules for construction and operation

Customers Who Viewed This Item Also Viewed:

Electromagnetic compatibility of technical equipment. Immunity of equipment for general lighting purposes to electromagnetic disturbance. Requirements and test methods
Language: English
Price: $218.25
Unified system for design documentation. Exploitative documents
Language: English
Price: $150.48
Еlectromagnetic compatibility of technical equipment. Harmonic current emissions (equipment input current <= 16 A per phase). Limits and test methods
Language: English
Price: $410.31
Limits and methods of measurement of radio disturbance characteristics of electrical lighting and similar equipment
Language: English
Price: $714.89
Еlectromagnetic compatibility of technical equipment. Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems. Equipment with rated current <= 16 A and not subject to conditional connection. Limits and test methods
Language: English
Price: $359.87
Pipeline valves. General safety requirements
Language: English
Price: $213.84
Steel welded vessels and apparatus. General technical conditions
Language: English
Price: $108.90
Conformity assessment system for the use of nuclear energy. Personnel in the non-destructive and destructive testing of metal. Requirements and qualification procedure Дата введения в действие 15.03.2018
Language: English
Price: $207.90
State system for ensuring the uniformity of measurements. Verification of testing equipment. General principles
Language: English
Price: $121.77
Unified system of corrosion and ageing protection. Paint coatings. Groups of operation conditions
Language: English
Price: $158.40
Atom stations. Equipment, instruments, means of monitoring and control systems. General technical requirements
Language: English
Price: $1,146.54
System of design documents for construction. Basic requirements for design and working documentation
Language: English
Price: $867.18
Hoisting cranes. Rules and test methods
Language: English
Price: $393.39
Stainless steels and corrosion resisting, heat-resisting and creep resisting alloys. Grades
Language: English
Price: $212.85
Non-destructive Testing. Welded Joints. Ultrasonic Methods
Language: English
Price: $140.58
Compilation and execution of safety data sheet of chemical products
Language: English
Price: $175.23
Cable products for nuclear power plants. Technical requirements of the operating organization
Language: English
Price: $449.11
Rolling stock of railways. Springs cylindrical screw. Certification requirements
Language: English
Price: $175.65
Loads and actions
Language: English
Price: $495.00
Technical Regulations of the Eurasian Economic Union "On Restriction of the Use of Hazardous Substances in Electrical and Radioelectronic Products"
Language: English
Price: $83.16

YOUR ORDERING MADE EASY!

RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.

Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.

We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.

Placing Your Order

Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).

Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.

For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.

For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.

Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.

Your Order Best Quality and Authenticity Guarantee

Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).

We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.

We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.

All Codes and Regulations

All Categories

Send us a message Expand Collapse

Leave your message in the form below, and we will write back by e-mail!