ODM 218.2.044-2014
ОДМ 218.2.044-2014
|
|
Recommendations for the performance of instrument and instrumental measurements in assessing the technical condition of bridge structures on highways
Рекомендации по выполнению приборных и инструментальных измерений при оценке технического состояния мостовых сооружений на автомобильных дорогах
Status: Effective - Introduced for the first time
The document is an act of recommendatory nature in the road sector, containing technical recommendations for the implementation of instrumental and instrumental surveys in assessing the technical condition of bridges on highways. The document is used in the examination and testing of any type of bridge structures on federal highways at various stages of the life cycle - newly built, operated, after repair, major repairs and reconstruction. The recommendations do not affect the geophysical methods for studying the underground foundation of the supports. The recommendations are addressed to Rosavtodor structural subdivisions, federal highways departments, highways departments, interregional directorates for the construction of federal roads, territorial road management authorities of the constituent entities of the Russian Federation in organizing and accepting survey works in accordance with the rules for applying technical regulation documents in the road sector. . Recommendations, in addition to the main purpose, can be used in the implementation of certain types of construction control works.
Документ является актом рекомендательного характера в дорожном хозяйстве, содержащим технические рекомендации по выполнению инструментального и приборного обследования при оценке технического состояния мостовых сооружений на автомобильных дорогах. Документ применяется при обследовании и испытаниях любых типов мостовых сооружений на федеральных автомобильных дорогах на различных этапах жизненного цикла - вновь построенных, эксплуатируемых, после выполнения ремонта, капитального ремонта и реконструкции. Рекомендации не затрагивают геофизические методы исследования подземной фундаментной части опор. Рекомендации адресованы структурным подразделениям Росавтодора, федеральным управлениям автомобильных дорог, управлениям автомобильных магистралей, межрегиональным дирекциям по строительству автомобильных дорог федерального значения, территориальным органам управления дорожным хозяйством субъектов Российской Федерации при организации и приемке обследовательских работ в соответствии с правилами применения документов технического регулирования в сфере дорожного хозяйства. Рекомендации, помимо основного назначения, могут быть использованы при реализации отдельных видов работ строительного контроля.
Choose Language:
Format: Electronic (pdf/doc)
Approved: Federal Road Agency Rosavtodor,
7/29/2014
SKU: RUSS161451
The Product is Contained in the Following Classifiers:
Construction (Max) »
Regulations »
Sectoral and departmental regulatory and methodological documents »
Design and construction of roads »
ISO classifier »
93 CIVIL CONSTRUCTION »
93.080 Road construction »
93.080.10 Road construction »
The Document References:
Code 190-FZ: Town Planning Code of the Russian Federation
Federal Law 184-FZ: About technical regulation
Federal Law 196-FZ: Traffic Safety
GOST 10060-2012: Concretes. Methods for the determination of frost-resistance
GOST 10180-2012: Concretes. Methods for strength determination using reference specimens
GOST 10181-2000: Concrete Mixtures Test method
GOST 12.0.004-90: Organization of training for labor safety. General rules
GOST 12004-81: Reinforcing-bar steel. Tensile test methods
GOST 12346-78: Alloyed and high-alloyed steels. Methods of silicon determination
GOST 12347-77: Alloyed and high-alloyed steels. Methods for determination of phosphorus
GOST 12348-78: Alloyed and high-alloyed steels. Methods of manganese determination
GOST 12350-78: Alloyed and high-alloyed steels. Methods of chromium determination
GOST 12351-2003: Alloyed and highalloyed steels. Methods for determination of vanadium
GOST 12352-81: Steels alloyed and highalloyed. Methods for the determination of nickel
GOST 12355-78: Alloyed and high-alloyed steels. Methods of copper determination
GOST 12356-81: Steels alloyed and highalloyed. Methods of the determination of titanium
GOST 12357-84: Steels alloyed and highalloyed. Methods for the, determination of aluminium
GOST 12358-2002: Alloyed and highalloyed steels. Methods for determination of arsenic
GOST 12359-81: Steels carbon, alloyed and highalloyed. Methods for the determination of nitrogen
GOST 12361-2002: Alloyed and highalloyed steels. Methods for determination of niobium
GOST 12364-84: Steels alloyed and highalloyed. Methods for the determination of cetium
GOST 12730.0-78: Concretes. General requirements for methods of determination of density, moisture content, water absorptions porosity and watertightness
GOST 12730.1-78: Concretes. Methods of determination of density
GOST 12730.2-78: Concretes. Method of determination of moisture content
GOST 12730.3-78: Concretes. Method of determination of water absorption
GOST 12730.4-78: Concretes. Methods of determination of porosity parameters
GOST 12730.5-84: Concretes. Methods for determination of water tightness
GOST 14019-2003: Metallic materials. Bend test method
GOST 14782-86: Nondestructive testing. Welded joints. Ultrasonic methods
GOST 1497-84: Metals. Methods of tension test
GOST 15140-78: Paintwork materials. Methods for determination of adhesion
GOST 15467-79: Product quality control. Basic concepts. Terms and definitions
GOST 16483.10-73: Wood. Methods for determination of ultimate strength in compression parallel the grain
GOST 16483.11-72: Wood. Method for determination of conventional ultimate strength in compression perpendicular to grain
GOST 16483.12-72: Wood. Method for determination of ultimate strength in shearing perpendicular to grain
GOST 16483.2-70: Wood. Method for determination of conventional ultimate strength in local compression perpendicular to grain
GOST 16483.3-73: Wood. Methods for determining the ultimate strength at static bending
GOST 16483.5-73: Wood. Methods for determination of ultimate shearing strength parallel to grain
GOST 16483.7-71: Wood. Methods for determination of moisture content
GOST 16483.9-73: Wood. Methods for determination of modulus of elasticity in static bending
GOST 16504-81: The state system of testing products. Product test and quality inspection. General terms and definitions
GOST 16588-91: Sawn products and wooden details. Methods for determining moisture content
GOST 166-89: Vernier callipers. Specifications
GOST 17623-87: Concrete. Radioisotope method of average density determination
GOST 17624-2012: Concrete. Ultrasonic method of strength determination
GOST 17625-83: Reinforced concrete structures and units. Radioactive method of determination of concrete protective covering thickness, reinforcement dimensions and arrangement
GOST 17745-90: Steels and alloys. Methods for determination of gases
GOST 18105-2010: Concretes. Rules of control and norm of an assessment of quality.
GOST 18353-79: Non-destructive check. Classification of types and methods
GOST 18661-73: Steel. Method for measurement of hardness by shock indentation
GOST 18835-73: Metals. Method for determination of plastic hardness
GOST 18895-97: Steel. Method of photoelectric spectral analysis
GOST 20420-75: Strain gauges. Terms and definitions
GOST 20911-89: Technical diagnostics. Terms and definitions
GOST 21105-87: Non-destructive testing. Method of magnetic particle testing
GOST 21616-91: Resistive-strain sensors
GOST 21718-84: Building materials. Dielectric method of measurement of moisture
GOST 21780-2006: System of ensuring the accuracy of geometrical parameters in construction. Accuracy calculation
GOST 22536.0-87: Carbon steel and unalloyed cast iron. General requirements for methods of analysis
GOST 22536.10-88: Carbon steel and unalloyed cast iron. Methods for determination of alluminium
GOST 22536.1-88: Carbon steel and unalloyed cast iron. Methods for determination of general carbon and graphite
GOST 22536.2-87: Carbon steel and unalloyed cast iron. Methods for the determination of sulfur
GOST 22536.3-88: Carbon steel and unalloyed cast iron. Methods for determination of phosphorus
GOST 22536.4-88: Carbon steel and unalloyed cast iron. Methods for determination of silicon
GOST 22536.5-87: Carbon steel and unalloyed cast iron. Methods for determination of manganese
GOST 22536.6-88: Carbon steel and unalloyed cast iron. Methods for determination of arsenic
GOST 22536.7-88: Carbon steel and unalloyed cast iron. Methods for determination of chromium
GOST 22536.8-87: Carbon steel and unalloyed cast iron. Methods for determination of copper
GOST 22536.9-88: Carbon steel and unalloyed cast iron. Methods for determination of nickel
GOST 22690-88: Concretes. Determination of strength by mechanical methods of nondestructive testing
GOST 22761-77: Metals and alloys. Brinell hardness test by static action portable hardness meters
GOST 22762-77: Metals and alloys. Yield point hardness test by ball indentation
GOST 22904-93: Reinforced concrete structures. Magnetic method for determining the thickness of the protective layer of concrete and the location of reinforcement
GOST 22975-78: Metals and alloys. Rockwell hardness test under low loads (using Super-Rockwell test)
GOST 23615-79: System of ensuring accuracy of geometrical parameters in construction. Statistical analysis of accuracy
GOST 23616-79: System of ensuring of geometrical accuracy of parameters in construction. Control of accuracy
GOST 24289-80: Eddy current non-destructive testing. Terms and definitions
GOST 24450-80: Magnetic non-destructive inspection. Terms and definitions
GOST 24452-80: Concretes. Methods of prismatic compressive strengths, modulus of elasticity and Poisson ratio determination
GOST 24544-81: Concretes. Methods for determining shrinkage and creep deformations
GOST 24545-81: Concretes. Methods of fatigue tests
GOST 24846-2012: Soils. Methods of measuring the strains of structures and building bases
GOST 25313-82: Radio wave non-destructive testing. Terms and definitions
GOST 25794.1-83: Reagents. Methods of preparation of standard volumetric solutions for acid-base titration
GOST 25866-83: Exploitation of technique. Terms and definitions
GOST 26134-84: Concretes. Ultrasonic method of frost resistance determination
GOST 26433.0-85: System of ensuring geometrical parameters accuracy in construction. Rules of measurement. General
GOST 26433.2-94: System of ensuring geometric parameters accuracy in building. Rules for measuring parameters of buildings and works
GOST 26775-97: Clearances of navigable bridge spans in the inland waterways. Norms and technical requirements
GOST 27677-88: Corrosion protection in construction. Concretes. General requirements for testing
GOST 27809-95: Cast iron and steel. Methods of spectrographic analysis
GOST 28570-90: Concretes. Methods of strength evaluation on cores drilled from structures
GOST 28702-90: Non-destructive testing. Ultrasonic thickness gauges. General technical requirements
GOST 29167-91: Concrete. The determination methods of fracture toughness characteristics
GOST 2999-75: Metals and alloys. Vickers hardness teat by diamond pyramid
GOST 31244-2004: Non-destructive testing. Evaluation of material physical and mechanical properties for technical system elements by acoustic method. General requirements
GOST 31993-2013: Paint materials. Determination of film thickness
GOST 3242-79: Welded joints
GOST 427-75: Measuring metal rules. Basic parameters and dimensions. Specifications
GOST 4919.1-77: Reagents and matters of special purity. Methods for preparation of indicators solutions
GOST 5382-91: Cements and materials for cement production. Chemical analysis methods
GOST 5639-82: Steel and alloys. Methods for detection and determination of grain size
GOST 5802-86: Mortars. Test methods.
GOST 6996-66: Welded joints. Methods of mechanical properties determination
GOST 7.54-88: System of standards on information, librarianship and publishing. Representation of numerical data on properties of substances and materials in scientific-technical documents
GOST 7268-82: Steel. Method for determination of ability to mechanical aging by impact bend testing
GOST 7473-2010: Fresh concrete. Specifications
GOST 7502-98: Measuring metal tapes. Specifications
GOST 7564-97: Rolled products general rules of samples, rough specimens and test pieces selection for mechanical and technological testing
GOST 7565-81: Iron, steel and alloys. Sampling for determination of chemical composition
GOST 8.009-84: State system for ensuring the uniformity of measurements. Standardized metrological characteristics of measuring instruments
GOST 8.050-73: State system for ensuring the uniformity of measurements. Reference conditions for linear and angular measurements
GOST 8.051-81: State system for ensuring the uniformity measurements. Permissible errors of measurement of linear dimensions to 500 mm
GOST 8.283-78: State system for ensuring the uniformity of measurements. Electromagnet flaw detector. Methods and means of verification
GOST 8.326-89: State system for ensuring the uniformity of measurements. Metrological certification measuring instruments
GOST 8.549-86: The state system of ensuring the uniformity of measurements. Permissible errors of measurement of linear dimensions to 500 mm with non-specified tolerances
GOST 8462-85: Wall materials. Methods for determination of ultimate compressive and bending strength
GOST 9012-59: Metals. Method of Brinell hardness measurement
GOST 9013-59: Metals. Method of measuring Rockwell hardness
GOST 9450-76: Measurements microhardness by diamond instruments indentation
GOST 9454-78: Metals. Method for testing the impact strength at the low, room and high temperature
GOST R 27.002-2009: Dependability in technics. Terms and definitions
GOST R 50597-93: Automobile roads and streets. The requirements to the level of maintenance. Satisfied the traffic safety
GOST R 52289-2004: Traffic control devices. Rules of application of traffic signs, markings, traffic lights, guardrails and delineators
GOST R 52290-2004: Traffic control devices. Traffic signs. General technical requirements
GOST R 52330-2005: Non-destructive testing. Evaluation of deformations in industrial and vehicle structures. General requirements
GOST R 52398-2005: Classification of automobile roads. General parameters and requirements
GOST R 52399-2005: Geometric elements of automobile roads
GOST R 52577-2006: General use highways. Methods for determination of parameters of highways geometric elements
GOST R 52607-2006: Traffic control devices. Roadside barriers. General technical requirements
GOST R 52727-2007: Technical diagnostics. Acoustic-emission diagnostics. General requirements
GOST R 52728-2007: Method of strain-and-temperature measurements in situ. General requirements
GOST R 52748-2007: Automobile roads of the general use. Standard loads, loading systems and clearance approaches
GOST R 53204-2008: Non-destructive testing. Alternating stress evaluation by ultrasound. General requirements
GOST R 53700-2009: Non-destructive testing. Magnetic particle testing. Part 3: Equipment
GOST R 53965-2010: Non-destructive testing. Evaluation of mechanical stresses. General requirements to the methods classification
GOST R 54257-2010: Reliability of the constructions and foundations. Basic principles and requirements
GOST R 54859-2011: Buildings and constructions. Definition of the parameters of the basic tone of free oscillations of buildings
GOST R 8.563-2009: State system for ensuring the uniformity of measurements. Procedures of measurements
GOST R 8.736-2011: State system for ensuring the uniformity of measurements. Multiple direct measurements. Methods of measurement results processing. Main principles
GOST R 8.753-2011: State system for ensuring the uniformity of measurements. Reference materials of materials (substance). Basic principles
GOST R ISO 12716-2009: Non-destructive testing. Acoustic emission inspection. Vocabulary
GOST R ISO 24497-1-2009: Non-destructive testing. Metal magnetic memory. Part 1. Vocabulary
GOST R ISO 24497-2-2009: Non-destructive testing. Metal magnetic memory. Part 2. General requirements
GOST R ISO 24497-3-2009: Non-destructive testing. Metal magnetic memory method. Part 3. Inspection of welded joints
GOST R ISO 5725-1-2002: Accuracy (trueness and precision) of measurement methods and results. Part 1. General principles and definitions
GOST R ISO 5725-2-2002: Accuracy (trueness and precision) of measurement methods and results. Part 2. Basic method for the determination of repeatability and reproducibility of a standard measurement method
GOST R ISO 5725-3-2002: Accuracy (trueness and precision) of measurement methods and results. Part 3. Intermediate measures of the precision of a standard measurement method
GOST R ISO 5725-4-2002: Accuracy (trueness and precision) of measurement methods and results. Part 4. Basic methods for the determination of the trueness of a standard measurement method
GOST R ISO 5725-5-2002: Accuracy (trueness and precision) of measurement methods and results. Part 5. Alternative methods for the determination of the precision of a standard measurement method
GOST R ISO 5725-6-2002: Accuracy (trueness and precision) of measurement methods and results. Part 6. Use in practice of accuracy values
MDS 12-9.2001: Regulations on the customer during the construction of facilities for state needs in the Russian Federation
MI 1967-89: Recommendation. State system for ensuring uniformity of measurements. The choice of methods and measuring instruments in the development of measurement techniques. General provisions
ODM 218.1.001-2010: Recommendations for the development and application of technical regulation documents in the field of road facilities
ODM 218.3.001-2010: Recommendations for the diagnosis of active corrosion of reinforcement in reinforced concrete structures of bridges on highways using the half-cell potential method
ODM 218.3.014-2011: Evaluation method for technical condition of bridges and automobile roads.
ODM 218.4.001-2008: Guidelines for the organization of inspection and testing of bridge structures on highways
ODM 218.4.002-2008: Guidelines for monitoring the status of existing bridge structures
ODM 218.4.002-2009: Recommendations for protection against corrosion of structures used on the roads of the Russian Federation bridges, fences and road signs
ODM 218.7.001-2009: Recommendations for the implementation of construction control on federal highways
ODN 218.017-2003: Guide to Assessment of Transport Operational Condition of Bridge Structures
Order 970: Administrative Regulations on rendering by the Federal Agency on Technical Regulation and Metrology of the state service on type approval of certified reference materials or type of measuring instruments
R 50-54-45-88: Recommendations. Calculations and tests of strength. Experimental methods for determining the stress-strain state of machine elements and structures. Method of full-scale tensometry of power equipment
RD 03-348-00: Methodological guidelines for magnetic inspection of steel ropes. Basic provisions.
RD 34.17.425-86: Procedural Guidelines for X-Ray Detection of Macrodamage to Metal in Circulation Piping and Housing Equipment of Electric Power Generating Stations
SNiP 1.06.05-85: Regulation on construction design supervision of enterprises, buildings and installation by design organizations
SNiP 12-01-2004: Organization of construction
SNiP 12-03-2001: Labor safety in construction industry
SNiP 12-04-2002: Safety in construction. Part 2. Construction works
SNiP 3.01.03-84: Survey operations in construction
SNiP 3.02.01-87: Earthen structures, foundation and basis
SNiP 3.03.01-87: Bearing and enclosing structures
SNiP 3.06.04-91: Bridges and pipes
SNiP 3.06.07-86: Bridges and Pipes. Rules for Inspection and Testing
SP 126.13330.2012: Survey operations in construction
SP 35.13330.2011: Bridges and pipes. Updated living edition of SNiP 2.05.03-84
SP 45.13330.2012: Earth structures, bases and foundations
SP 46.13330.2012: Bridges and pipes
SP 48.13330.2011: Organization of construction
SP 70.13330.2012: Bearing and enclosing structures. Updated living edition of SNiP 3.03.01-87
SP 79.13330.2012: Bridges and culverts. Rules of examination and test
The Document is Referenced By:
GOST R 70073-2022: Public roads. Bridges and road pipes. Methods for determining geometric and physical parameters
ODM 218.2.070-2016: Guidelines for the design, installation and maintenance of seismic protective devices of bridges on highways
ODM 218.2.093-2019: Guidelines for assessing the technical condition and confirming the effectiveness of the use of structures made of polymer composite materials on roads
ODM 218.3.042-2014: Recommendations for determining the parameters and assignment of categories of defects in assessing the technical condition of bridges on highways
ODM 218.4.027-2016: Recommendations for determining the carrying capacity of operated bridge structures on public roads. Metal and steel-reinforced concrete structures
ODM 218.5.009-2008: Technology for magnetic diagnostics of prestressed reinforcement and assessment of the technical condition of reinforced concrete beams of bridge structures
ODM 218.6.030-2017: Recommendations for establishing and warranty periods and service life of structural elements of bridge structures
ODM 218.9.015-2016: Recommendations for the organization of automated monitoring of the state of the artificial structures of highways as part of intelligent transport systems
SP 79.13330.2012: Bridges and culverts. Rules of examination and test
Customers Who Viewed This Item Also Viewed:
 |
State system for ensuring the uniformity of measurements. Measurements of liquids and gases flow rate and quantity by means of orifice instruments. Part 5. Measurement procedure
Language: English |
Petroleum products. Method for measurement of viscosity by automatic capillar viscosimeter
Language: English |
Greases. Method for determination of ultimate strength and thermostrengthening
Language: English |
Electric heating devices for heating rolling stock railways. Safety requirements and test methods
Language: English |
Ice cream. General technical requirements
Language: English |
Pipe fittings. Ball valves made of brass. General specifications
Language: English |
 |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.