OSN-APK 2.10.03.001-04
ОСН-АПК 2.10.03.001-04
|
|
Designing the integrated protection of reinforced concrete structures of industrial agricultural buildings and structures from the effects of corrosive environments
Проектирование комплексной защиты железобетонных конструкций производственных сельскохозяйственных зданий и сооружений от воздействия агрессивных сред
Status: Effective
The requirements of the Standards should be observed in the design, manufacture and installation of reinforced concrete structures intended for the construction of livestock and poultry farms, farms, buildings and structures, including premises for the maintenance and feeding of pigs, cattle of all directions, sheep, rabbits, poultry; facilities for the storage and cleaning of manure runoff, as well as the preparation and storage of feed.
Требования Норм должны соблюдаться при проектировании, изготовлении и монтаже железобетонных конструкций, предназначенных для строительства животноводческих и птицеводческих комплексов, ферм, зданий и сооружений, в том числе помещений для содержания и откорма свиней, крупного рогатого скота всех направлений, овец, кроликов, птицы; сооружений по хранению и очистке навозных стоков, а также по приготовлению и хранению кормов.
Choose Language:
Format: Electronic (pdf/doc)
Approved: Ministry of Agriculture of the Russian Federation,
11/10/2004
SKU: RUSS161642
The Product is Contained in the Following Classifiers:
Construction (Max) »
Regulations »
Sectoral and departmental regulatory and methodological documents »
Design of agricultural enterprises »
ISO classifier »
65 AGRICULTURE »
65.040 Agricultural buildings, structures and installations »
65.040.99 Agricultural buildings and installations, other aspects »
The Document References:
GOST 10060.0-95: Methods for the determination of frost-resistance. General requirements
GOST 10178-85: Portland cement and portland blastfurnace slag cement. Specifications
GOST 10922-90: Welded reinforcing products and inserts, welded joints of reinforcement and inserts for reinforced concrete structures. General specifications
GOST 111-90: Polished glass. Specifications
GOST 127.1-93: Commercial sulfur
GOST 12730.2-78: Concretes. Method of determination of moisture content
GOST 12730.3-78: Concretes. Method of determination of water absorption
GOST 12730.4-78: Concretes. Methods of determination of porosity parameters
GOST 12730.5-84: Concretes. Methods for determination of water tightness
GOST 13015.1-81: Prefabricated concrete and reinforced concrete constructions and products. Acceptance
GOST 13015-2003: Concrete and reinforced concrete products for construction. General technical requirements. Rules for acceptance, marking, transportation and storage
GOST 14782-86: Nondestructive testing. Welded joints. Ultrasonic methods
GOST 14818-69: Stamped no-go plain plug gauges with headpieces of diameter over 50 to 100 mm. Design and dimensions
GOST 14918-80: Continuously galvanized sheet steel. Technical conditions.
GOST 1497-84: Metals. Methods of tension test
GOST 15140-78: Paintwork materials. Methods for determination of adhesion
GOST 17623-87: Concrete. Radioisotope method of average density determination
GOST 17624-87: Concrete. Ultrasonic method of strength determination
GOST 17625-83: Reinforced concrete structures and units. Radioactive method of determination of concrete protective covering thickness, reinforcement dimensions and arrangement
GOST 18105-86: Concretes. Rules for the strength control
GOST 19804.7-83: Two-console reinforced concrete pile-pillars for agricultural buildings. Construction and dimensions
GOST 22266-76: Sulphate resisting cements. Specifications
GOST 22266-94: Sulphate-resistant cements. Specifications
GOST 22690-88: Concretes. Determination of strength by mechanical methods of nondestructive testing
GOST 22904-93: Reinforced concrete structures. Magnetic method for determining the thickness of the protective layer of concrete and the location of reinforcement
GOST 24022-80: Precast reinforced concrete foundations for columns of agricultural buildings. Specifications
GOST 24332-88: Silica bricks and stones. Ultrasonic method of compressive strength determination
GOST 24640-91: Additions for cements. Classification
GOST 25485-89: Cellular concretes. Specifications
GOST 25881-83: Chemically resistant concretes. Methods of test
GOST 26134-84: Concretes. Ultrasonic method of frost resistance determination
GOST 26254-84: Buildings and structures. Methods of determination of thermal resistance of enclosing structures
GOST 27006-86: Concretes. Rules for mix proportioning
GOST 27180-86: Ceramic tiles. Test methods
GOST 28570-90: Concretes. Methods of strength evaluation on cores drilled from structures
GOST 30515-97: Cements General specifications
GOST 4.205-79: Quality ratings system. Building. Glass for building and glass and slag sital products. Nomenclature of characteristics
GOST 5802-86: Mortars. Test methods.
GOST 6992-68: Lacquers and paints. Method for determination of weather-resistance of coatings
GOST 7025-91: Ceramic and calcium silicate bricks and stones. Methods for water absorption and density determination and frost resistance control
GOST 7076-99: Building materials and products. Method of determination of steady-state thermal conductivity and thermal resistance
GOST 7512-82: Nondestructive testing. Welded joints. Radiography method
GOST 7564-73: Steel. General rules of samples, blanks and test pieces for mechanical and technological tests
GOST 7565-81: Iron, steel and alloys. Sampling for determination of chemical composition
GOST 8462-85: Wall materials. Methods for determination of ultimate compressive and bending strength
GOST 8829-94: Reinforced concrete and prefabricated concrete building products. Loading test methods. Assesment of strength, rigidity and crack resistance
GOST 9.301-86: Unified system of corrosion and ageing protection. Metal and non-metal inorganic coatings. General requirements
GOST 9.302-88: Unified system of corrosion and ageing protection. Metal and non-metal inorganic coatings. Control methods
GOST 9.304-87: Unified system of corrosion and ageing protection. Thermal sprayed coatings. General requirements and methods of control
GOST 9.307-89: Unified system of corrosion and ageing protection. Hot-dip zinc coatings. general requirements and methods of checking
GOST 9.402-80: Metal surface preparation for painting
GOST 9454-78: Metals. Method for testing the impact strength at the low, room and high temperature
GOST 9757-90: Artificial porous gravel, crushed stone and sand artificially produced expanded/foamed gravel, crushed rock and sand]. Specifications
SN 245-71: Sanitary standards for the design of industrial enterprises
SNiP 2.03.11-85: Corrosion protection of buildings structures
|
Customers Who Viewed This Item Also Viewed:
 |
Jet fuels
Language: English |
System for ensuring the reliability and safety of construction sites. Loads and impacts. design standards
Language: English |
Chill moulds. Ventilation channels. Dimensions
Language: English |
Laminated glued wood. Methods for determination of ultimate and modulus of elasticity in static bending
Language: English |
Microbiology of food and animal feeding stuffs. Methods for detection and enumeration of sulphite-reducing bacteria growing under anaerobic conditions
Language: English |
Rails of types P38 and P42. Technical conditions
Language: English |
 |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.
