PND F 13.1:2:3.74-2012
ПНД Ф 13.1:2:3.74-2012
|
|
Quantitative chemical analysis of atmospheric air and air emissions. Methods of measuring the mass concentration of hydrocarbons (total) in the atmospheric air, working area air, industrial emissions by the method of IR spectrophotometry using concentration meters of the KN series (MR SEP-09-11)
Количественный химический анализ атмосферного воздуха и выбросов в атмосферу. Методика измерений массовой концентрации углеводородов (суммарно) в атмосферном воздухе, воздухе рабочей зоны, промышленных выбросах методом ИК-спектрофотометрии с применением концентратомеров серии КН (МР СЭП-09-11)
Status: Effective. Certificate of certification of the measurement procedure (method) No. 08-47
The document establishes a method for measuring the mass concentration of hydrocarbons (total) in the atmospheric air, air of the working area and industrial emissions by the method of IR spectrophotometry using concentrator meters of the KN series. Measurement range from 1 to 500 mg
Документ устанавливает методику измерений массовой концентрации углеводородов (суммарно) в атмосферном воздухе, воздухе рабочей зоны и промышленных выбросах методом ИК-спектрофотометрии с применением концентратомеров серии КН. Диапазон измерений от 1 до 500 мг/м3. Методика предназначена для контроля выбросов углеводородов в атмосферном воздухе, воздухе рабочей зоны и промышленных выбросах.
Choose Language:
Format: Electronic (pdf/doc)
Approved: Federal State Institution Federal Center for Analysis and Assessment of Technogenic Impact,
3/24/2017
SKU: RUSS162087
The Product is Contained in the Following Classifiers:
PromExpert »
SECTION III. LABOR PROTECTION AND SAFETY »
V Social Security »
1 Requirements of sanitary and epidemiological regulation »
1.1 General requirements of sanitary-epidemiological regulation »
PromExpert »
SECTION V. ENVIRONMENTAL PROTECTION. NATURE USE »
II Ensuring environmental safety »
1 Air Protection »
1.2 Rationing infield of atmospheric air protection »
1.2.1 Rationing of air quality and harmful physical effects »
1.2.1.3 Requirements for quality of atmospheric air of industrial facilities and industries »
PromExpert »
SECTION V. ENVIRONMENTAL PROTECTION. NATURE USE »
II Ensuring environmental safety »
1 Air Protection »
1.2 Rationing infield of atmospheric air protection »
1.2.1 Rationing of air quality and harmful physical effects »
1.2.1.2 Requirements for air quality in populated areas »
PromExpert »
SECTION III. LABOR PROTECTION AND SAFETY »
II Industrial sanitation and occupational health »
3 Workspace air »
3.1 Hygienic regulation of microclimate parameters and content of harmful substances in air of working area »
ISO classifier »
13 ENVIRONMENTAL PROTECTION, HUMAN PROTECTION AGAINST ENVIRONMENTAL IMPACT. SECURITY »
13.040 Air quality »
13.040.20 Ambient atmosphere »
The Document References:
GN 2.1.6.1338-03: Maximum allowable concentrations (MACs) of pollutants in the air of residential areas
GOST 10727-2015: Unidirectional glass threads. Specifications
GOST 10727-91: Unidirectional glass threads. Specifications
GOST 12.0.004-2015: Occupational safety standards system. Organization of training for labor safety. General principles
GOST 12.0.004-90: Organization of training for labor safety. General rules
GOST 12.0.230-2007: Occupational safety standards system. Occupational safety and health management systems. General requirements
GOST 12.1.004-91: Fire safety. General requirements
GOST 12.1.005-88: General sanitary requirements for working zone air
GOST 12.1.007-76: Noxious substances. Classification and general safety requirements
GOST 12.1.016-79: Work area air
GOST 12.4.009-83: Fire-fighting equipment for protection of units. Basic types. Location and maintenance
GOST 14919-83: Household electric ranges, electric plates and electric frying ovens
GOST 17.2.3.01-86: Nature protection. Atmosphere. Air quality control regulations for populated areas
GOST 1770-74: Laboratory volumetric glassware. Cylinders, beakers, measuring flasks, test tubes. General specifications
GOST 19908-90: Transparent quartz glass crucibles, basins, cups, flasks, funnels, test-tubes and caps. General specifications
GOST 20288-74: Reagents. Carbon tetrachloride. Specifications
GOST 25336-82: Laboratory glassware and equipment. Basic parameters and dimensions
GOST 28498-90: Liquid-in-glass thermometers
GOST 29227-91: Laboratory glassware. Graduated pipettes. Part 1. General requirements
GOST 3956-76: Silica gel technical. Technical conditions
GOST 4166-76: Reagents. Sodium sulphate. Specifications
GOST 4204-77: Reagents. Sulphuric acid. Specifications
GOST 4461-77: Reagents. Nitric acid. Specifications
GOST 5556-81: Medical absorbent cotton
GOST 6217-74: Wood crushed activated carbon. Specifications
GOST 6709-72: Distilled water. Specifications
GOST 7328-2001: Weights. General specifications
GOST 8136-85: Active aluminum oxide
GOST 9147-80: Laboratory porcelain ware and apparatus. Specifications
GOST ISO/IEC 17025-2009: General requirements for the competence of testing and calibration laboratories
GOST R 12.1.019-2009: Occupational safety standards system. Electrical safety. General requirements and nomenclature of kinds of protection
GOST R 51945-2002: Aspirators. General specifications
GOST R 53228-2008: Non-automatic weighing instruments. Part 1. Metrological and technical requirements. Tests
GOST R 8.563-2009: State system for ensuring the uniformity of measurements. Procedures of measurements
GOST R ISO 5725-6-2002: Accuracy (trueness and precision) of measurement methods and results. Part 6. Use in practice of accuracy values
PND F 12.1.1-99: Guidelines for sampling in determining the concentration of harmful substances (gases and vapors) in industrial emissions.
RD 52.04.186-89: Part 1. Guidance on the control of air pollution. Pollution of the atmosphere in cities and other settlements. Main Geophysical Observatory. A.I.Voyeikova (MGO)
RMG 76-2014: State system for ensuring the uniformity of measurements. Internal control of quantitative chemical analysis result's accuracy
|
Customers Who Viewed This Item Also Viewed:
 |
Jet fuels
Language: English |
State system for ensuring the uniformity of measurements. Measurements of liquids and gases flow rate and quantity by means of orifice instruments. Part 5. Measurement procedure
Language: English |
Molded parts of coupler and automatic coupler devices of railway rolling stock. General specifications.
Language: English |
Main-line diesel locomotives. General technical requirements.
Language: English |
Four-wheel bogies of freight cars for mainline railways gauge 1520 (1524) mm. Specifications
Language: English |
Technical ethylcellosolve. Specifications
Language: English |
Automatic coupler model SA-3 and its components. Design and dimensions
Language: English |
Railway rolling stock. Devices to prevent running gear parts from dropping to the track. Methods of controlling strength characteristics
Language: English |
Electric heating devices for heating rolling stock railways. Safety requirements and test methods
Language: English |
Ice cream. General technical requirements
Language: English |
Welded joints in steel structures of railway rolling stock. Requirements for design, implementation and quality control
Language: English |
Locomotives The method of dynamic strength tests
Language: English |
Railway rolling stock. Norms for permissible exposure of railway track and test methods
Language: English |
Locomotives. Requirements for strength and dynamic qualities
Language: English |
 |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.
