GOST 10178-85
ГОСТ 10178-85
|
|
Portland cement and portland blastfurnace slag cement. Specifications
Портландцемент и шлакопортландцемент. Технические условия
Status: Effective
The standard applies to general purpose cements based on Portland cement clinker. The standard does not apply to cements that are subject to special requirements and which are produced according to relevant standards and specifications.
Стандарт распространяется на цементы общестроительного назначения на основе портландцементного клинкера. Стандарт не распространяется на цементы, к которым предъявляются специальные требования и которые изготовляются по соответствующим стандартам и техническим условиям
Choose Language:
Format: Electronic (pdf/doc)
Approved: Gosstroy of the USSR (State Committee of the Council of Ministers of the USSR for Construction),
7/10/1985
SKU: RUSS16247
The Product is Contained in the Following Classifiers:
Construction (Max) »
Regulations »
Documents System of normative documents in construction »
6. Regulatory documents for building materials and products »
k.61 Mineral binders »
ISO classifier »
91 CONSTRUCTION MATERIALS AND CONSTRUCTION »
91.100 Building Materials »
91.100.10 Cement. Gypsum. Lime. Building mixture »
National standards »
91 CONSTRUCTION MATERIALS AND CONSTRUCTION »
91.100 Building Materials »
91.100.10 Cement. Gypsum. Lime. Building mixture »
National Standards for KGS (State Standards Classification) »
Latest edition »
Zh Construction and building materials »
Zh1 Construction materials »
Zh12 Cementing materials »
The Document is Replaced With:
GOST 31108-2020: Cements for general construction. Specifications
As a Replacement Of:
GOST 10178-76: Portland cement and slag Portland cement. Specification
The Document References:
GOST 10178-76: Portland cement and slag Portland cement. Specification
GOST 22236-85: Cements. Rules of acceptance
GOST 22237-85: Cements. Packing, labelling, transport and storage
GOST 23464-79: Cements classification
GOST 30515-97: Cements General specifications
GOST 310.1-76: Cements. Test methods
GOST 310.2-76: Cements. Methods of grinding fineness determination
GOST 310.3-76: Cements. Methods of tests consistency, times of settining and of soundness
GOST 310.4-81: Cements. Methods of tests of bending and compression strengths
GOST 3476-74: Slags domain and electrothermophosphoric granulated for the production of cements
GOST 4013-82: Gypsum and gypsum-anhydrite rock for the manufacture of binders. Specifications
GOST 5382-91: Cements and materials for cement production. Chemical analysis methods
GOST 6613-86: Square meshed woven wire gauzes
SNiP 82-02-95: Federal (standard) element cement consumption rates at manufacture of concrete and reinforced concrete products and structures
The Document is Referenced By:
GOST 11118-2009: Autoclaved aerated concrete panels for external walls of buildings. Specifications
GOST 12586.0-83: Reinforced-concrete vibrohydropressed pressure pipes
GOST 14047.3-81: Lead concentrates. Methods for the determination of gold and silver
GOST 14048.13-80: Zinc concentrates. Methods for the determination of silver and gold
GOST 14254-2015: Degrees of protection provided by enclosures (IP Code)
GOST 14254-96: Degrees of protection provided by enclosures (IP Code)
GOST 15934.10-82: Copper concentrates. Methods for determination of gold and silver
GOST 17412-72: Electrical articles for the cold climate regions. Technical requirements, acceptance and test methods
GOST 17608-2017: The concrete paving slabs. Specifications
GOST 17608-91: Footway concrete slabs. Specifications
GOST 19222-2019: Arbolit and products from it. General specifications
GOST 19222-84: Arbolit and its products. General specifications
GOST 19330-2013: Masts (poles) for overhead contact line supports of railways. Specifications
GOST 19330-99: Centrifugal reinforced concrete posts for railway overhead line equipment. Specifications
GOST 19570-2018: Panels made of autoclaved aerated concrete for floors of residential and public buildings. Technical specifications
GOST 19804.7-83: Two-console reinforced concrete pile-pillars for agricultural buildings. Construction and dimensions
GOST 20054-2016: Concrete non-pressure pipes. Specifications
GOST 20910-2019: Concrete is heat-resistant. Technical specifications
GOST 20910-90: Refractory concretes. Specifications
GOST 21174-75: Prestressed reinforced concrete sleepers for the wide-gauge tramways
GOST 21924.0-84: Reinforced-Concrete Slabs for Urban Road Pavements. Specifications
GOST 22131-2016: Concrete towers for railway high voltage signal line of autoblock. Technical requirements
GOST 22229-83: Ceramic through insulators for voltage over 1000 V. General specifications
GOST 22234-76: Polyester 24K. Specifications
GOST 22236-85: Cements. Rules of acceptance
GOST 2226-2013: Bags made of paper and composite materials. General specifications
GOST 22263-76: Crushed stone and sand of porous rocks. Technical requirements
GOST 22266-94: Sulphate-resistant cements. Specifications
GOST 2226-88: Paper bags
GOST 22687.0-85: Racks reinforced concrete centrifuged for supports of high-voltage power lines. Technical conditions
GOST 22688-2018: Lime for building purposes. Test methods
GOST 22688-77: Lime for building purposes. Test methods
GOST 22690-88: Concretes. Determination of strength by mechanical methods of nondestructive testing
GOST 22782.6-81: Explosion proof electrical apparatus. Flameproof enclosure. Technical requirements and Test methods.
GOST 22930-87: Prestressed reinforced concrete slabs for irrigation canal lining of melioration systems. Specifications
GOST 23558-94: Crushed stone-gravel-sandy mixtures, and soils treated by inorganic binders for road and airfield construction. Specifications
GOST 24099-2013: Decorative facing slabs on basis of natural stone. Specifications
GOST 24099-80: Decorative facing slabs of crushed natural stone. Specifications
GOST 24594-81: Wall panels and blocks of brick and ceramic stones. General specifications
GOST 24893.0-81: Reinforced concrete frame brace for industrial buildings. Specifications
GOST 25363-82: Zinc concentrates. Atomic-absorption methods for the determination of gold and silver contents
GOST 25485-2019: Cellular concrete. General specifications
GOST 25485-89: Cellular concretes. Specifications
GOST 25820-2000: Lightweight aggregates concretes. Specifications
GOST 25820-2014: Lightweight aggregates concretes. Specifications
GOST 25820-83: Lightweight concrete. Specifications
GOST 25912.0-83: Prestressed reinforced concrete slabs for aerodrome pavement. Specifications
GOST 25912.0-91: Reinforced concrete slabs for aerodrome pavement
GOST 25912-2015: Prestressed reinforced concrete slabs for aerodrome pavement. Specifications
GOST 26071-84: Racks of ferro-concrete, vibrated for supports of overhead power lines 0,38 kV. Specification
GOST 26633-2012: Heavy-weight and sand concretes. Specifications
GOST 26633-2015: Heavy-weight and sand concretes. Specifications
GOST 26633-85: Heavy-weight and sand concretes. Specifications
GOST 26633-91: Heavy-weight and sand concretes. Specifications
GOST 26815-86: Constructions of support walls reinforced concrete. Specification
GOST 26819-86: Reinforced concrete pressure pipes with steel mandrel
GOST 28013-89: Mortars. General specifications
GOST 28013-98: Mortars. General specifications
GOST 28089-2012: Wall masonry constructions. Test methods for bond strength of facing tiles with the base
GOST 28089-89: Wall masonry constructions. Test method for bond strength of facing tiles with the base
GOST 28570-2019: Concrete Methods for determining the strength of samples taken from structures
GOST 28570-90: Concretes. Methods of strength evaluation on cores drilled from structures
GOST 28575-2014: Corrosion protection in construction. Structural concrete. Test of vapour permeability of coatings
GOST 30459-2003: Additives for concretes and mortars. Methods of determining the efficiency
GOST 30459-2008: Admixtures for concretes and mortars. Determination and estimate of the efficiency
GOST 30491-2012: Organomineral mixtures and soils stabilized by organic binders for road and airfield construction. Specifications
GOST 30491-97: Organic mineral mixtures and soils stabilized by organic dinders for road and airfield construction Specifications
GOST 30515-97: Cements General specifications
GOST 30630.2.7-2013: Test methods for resistance to climatic external influencing factors for machines, instruments and other industrial products. Tests on the effects of dust (sand)
GOST 30744-2001: Cements. Methods of testing with using polyfraction standard sand
GOST 30852.1-2002: Explosionproof electrical equipment. Part 1. Flameproof enclusure type explosion protection
GOST 31108-2003: General structural Portland clinker cements. Specifications
GOST 31356-2007: Dry building cement binder mixes. Test methods
GOST 31357-2007: Dry bulding cement binder mixes. General specifications
GOST 31359-2007: Cellular autoclave curing concretes. Specifications
GOST 31383-2008: Protection against corrosion of concrete and reinforced concrete constructions. Test methods
GOST 31384-2008: Structural concrete protection against corrosion. General requirements
GOST 31384-2017: Protection of concrete and reinforced concrete structures against corrosion. General technical requirements
GOST 32209-2013: Reinforced for overhead contact line supports оf railways. Specifications
GOST 32221-2013: Copper concentrates. Methods of analysis
GOST 32492-2015: Fibre-reinforced polymer bar for concrete reinforcement. Determination of physical-mechanical properties
GOST 32521-2013: Pоlymеric sасks. General specifications
GOST 32522-2013: Polypropylene woven sacks. General specifications
GOST 32803-2014: Self-stressing concrete. General specifications
GOST 32955-2014: Public roads. Trays for road drainage. Technical specifications
GOST 33083-2014: Dry building plaster cement binder mixes. Specifications
GOST 33126-2014: Expanded clay concrete blocs. Specifications
GOST 33174-2014: Automobile roads of general use. Cement. Technical requirements
GOST 33320-2015: Ferro-concrete cross ties for railways. General specifications
GOST 33929-2016: Concrete with polysterene aggregates. Specifications
GOST 34000-2016: Shaped charge. Test methods for function and safety
GOST 34518-2019: Industrial furnaces and thermal units. Rules for the organization and production of work, monitoring of performance and requirements for the results of work
GOST 34519-2019: Industrial chimney and ventilation pipes. Rules for the organization and production of work, monitoring of performance and requirements for the results of work
GOST 34823-2022: Trunk pipeline transport of oil and petroleum products. Organization and performance of construction and installation works on the territory of permafrost soils spreading
GOST 6133-2019: Concrete wall stones. Technical conditions
GOST 6133-99: Concrete wall stone. Specifications
GOST 6482-2011: Ferroconcrete nonpressure pipes. Technical specifications.
GOST 6490-2017: Line suspension disk insulators. General specifications
GOST 6665-91: Concrete and Reinforced Concrete Curbs. Specifications
GOST 6786-80: Reinforced concrete parapet slabs for production buildings. Specifications
GOST 8462-85: Wall materials. Methods for determination of ultimate compressive and bending strength
GOST 8608-79: Porcelain pin support insulators for voltage above 1000 V. General specifications
GOST 9758-2012: Porous inorganic aggregates for construction work. Test methods
GOST 9758-86: Non-organic porous aggregates for construction work
GOST 9984-85: Ceramic support insulators rated for voltage over 1000 v
GOST R 51263-2012: Concrete with polystyrene aggregates. Specifications
GOST R 51263-99: Concrete with polysterene aggregates. Specifications
GOST R 51330.1-99: Electrical apparatus for explosive gas atmospheres. Part 1. Construction and verification test of flameproof enclosures of electrical apparatus
GOST R 51720-2001: Polymeric sacks. General specifications
GOST R 52034-2003: Ceramic support insulators for voltage over 1000 V. General specifications
GOST R 52034-2008: Ceramic support insulators for voltage over 1000 V. General specifications
GOST R 52560-2006: Climatic environment stability test methods for machines, instruments and other industrial products. Test methods for dust (sand) influence
GOST R 52564-2006: Polypropylene woven sacks. General specifications
GOST R 52751-2007: Steel-fibro-concrete slabs for bridge spans. Specifications
GOST R 53361-2009: Bags made of paper and composite materials. General specifications
GOST R 54270-2010: Masts (Poles) for overhead contact line supports of railways. Specifications
GOST R 54271-2010: Anchors for overhead and contact line supports of rail ways. Specifications
GOST R 54272-2010: Reinforced concrete foundations for overhead contact line supports of railways. Specifications
GOST R 54358-2011: Dry cement base decorative coats for facade’s thermal insulation composite systems with external mortar’s lays. Specifications
GOST R 54358-2017: Dry cement base decorative coats for faзade’s thermo insulation composite systems with external plaster lays. Specifications
GOST R 54359-2011: Dry cement base adhesives, base coats and patching putties for facade’s thermo insulation composite systems with external mortar’s lays. Specifications
GOST R 54854-2011: Light-weight concretes on phytogenesis organic aggregates. Specifications
GOST R 54919-2012: Concentrates lead. Methods for the determination of gold and silver
GOST R 55224-2012: Cements for the transport construction. Specifications
GOST R 55260.1.3-2012: Hydro power plants. Part 1-3. Hydroelectric power station hydraulic installations. Concrete construction and reinforced concrete construction. Safety requirements
GOST R 55685-2013: Blister copper. Methods of analysis
GOST R 56178-2014: Modifiers of organic-mineral origin of MB type for concretes, mortars and dry mixes. Specifications
GOST R 56506-2015: Coarse-pored claydite-concrete heat insulating tiles. Specifications
GOST R 56589-2015: Claydite-concrete heating main chutes. Specifications
GOST R 56593-2015: Mineral admixtures for concretes and mortars. Test methods
GOST R 56600-2015: Reinforced concrete prestressed slabs for pavements of roads. Specifications
GOST R 56686-2015: Dry construction plaster mixes based on cement binder with use of ceramsite sand. Specifications
GOST R 56687-2015: Protection of concrete and reinforced-concrete construction from corrosion. Test method of sulphate resistance of concrete
GOST R 56731-2015: Anchors for use in concrete. Test methods
GOST R 56859-2016: Copper and complex ores, and products of their processing. Methods of measurement of gold and silver weight fraction
GOST R 57255-2016: Photo catalytic self-cleaning concrete. Specifications
GOST R 57796-2017: Dry building mixes on cement binder with use of ceramsite sand for mortars. Specifications
GOST R 58323-2018: Reinforced concrete pipes for trenchless laying of engineering networks. Technical conditions
GOST R 58336-2018: Anchor angles. Test methods
GOST R 58387-2019: Glue anchors for fastening in concrete. Test methods
GOST R 58411-2019: Flexible concrete slabs. Technical specifications
GOST R 58527-2019: Wall materials. Methods for determining compressive and bending strengths
GOST R 58757-2019: Fiberglass products for the installation of decorative and facing elements of building facades. Technical specifications
GOST R 58766-2019: Building solutions. General specifications
GOST R 58818-2020: Automobile roads with low traffic intensity. Design, construction and calculation
GOST R 58894-2020: Condensed silica fume for concrete and mortars. Specifications
Guideline 424: Guidelines for the construction of line structures for backbone and intra-zone cable communication lines (Sections 15-23. Appendices 1-11)
Guideline 424: Guidelines for the construction of line structures for backbone and intra-zone cable communication lines
Manual: Manual for impulse and low consumption fire extinguishing systems
Manual for MGSN 2.09-03: Corrosion protection of concrete and reinforced concrete structures of transport facilities
Manual for SNiP 2.03.11-85: Manual on the design of corrosion protection for stone, reinforced stone and asbestos-cement structures
Manual for SNiP 2.03.11-85: A manual for monitoring the state of building metal structures of buildings and structures in aggressive environments, conducting surveys and designing the restoration of corrosion protection of structures
Manual for SNiP 2.03.11-85: Designer's Guide to Corrosion Protection for Concrete and Reinforced Concrete Structures
Manual for SNiP 2.04.02-84: A guide to designing automation and dispatching water systems
Manual for SNiP 2.04.02-84: Cooling Tower Design Guide
Manual for SNiP 2.04.02-84: Manual for the design of facilities for water treatment and treatment
Manual for SNiP 2.04.02-84: Design of facilities for sludge dewatering of natural water treatment plants
Manual for SNiP 2.04.02-84: Allowance for the volume and content of technical documentation for off-site water supply and sewage systems
Manual for SNiP 2.04.02-84: A guide to determining the wall thickness of steel pipes, the selection of grades, groups and categories of steels for external water supply and sewage networks
Manual for SNiP 2.04.02-84: Drawing up the technical and economic part of the off-site water supply and sewage systems projects. Reference manual to SNiP
Manual for SNiP 2.04.02-84: Design Guide for Surface Water Abstraction Facilities
Manual for SNiP 2.04.02-84: Design Guide for Groundwater Abstraction
Manual for SNiP 2.04.02-84: Manual for the protection of the inner surface of steel pipes from corrosion (to SNiP 2.04.02-84)
Manual for SNiP 2.04.02-84: A guide for the design of water supply and sanitation in difficult engineering and geological conditions. T-3083
Manual for SNiP 2.09.03-85: Design of retaining walls and basement walls
Manual for SNiP 2.09.03-85: Design of open crane overpasses
Manual for SNiP 2.09.03-85: Design Guide for Anchor Bolts for Securing Building Structures and Equipment
Manual for SNiP 2.09.03-85: Manual on designing stand-alone supports and overpasses for process pipelines
Manual for SNiP 2.09.03-85: Conveyor Gallery Design Guide
Manual for SNiP 3.06.03-85: Manual for the preparation and use of bitumen road emulsions
Manual for SNiP 3.06.03-85: Manual for surface treatment on roads
Manual for SNiP 3.06.03-85: Manual on the construction of coatings and foundations of roads and airfields from soils reinforced with cementing materials to SNiP 3.06.03-85 and SNiP 3.06.06-88
Manual for SNiP 3.06.03-85: Manual for the construction of asphalt concrete pavements and foundations of roads and airfields
Manual for SNiP 3.07.02-87: Allowance for the production and acceptance of work during the construction of new, reconstruction and expansion of existing hydrotechnical sea and river transport facilities
Manual for SNiP 3.09.01-85: Manual on the use of chemical additives in the production of precast concrete structures and products
Manual for SNiP 3.09.01-85: Manual for the heat treatment of precast concrete structures and products
Manual for SNiP 3.09.01-85: The technology of manufacturing reinforced concrete pressure pipes with a steel core
Manual for SNiP 3.09.01-85: Manual for the heat treatment of reinforced concrete products with natural gas combustion products
Manual for SNiP 3.09.01-85: Production of prefabricated self-reinforced concrete structures and products
Manual for SNiP 3.09.01-85: Reinforced concrete molding technology manual
Manual for SNiP 3.09.01-85: Manual for heliothermal processing of concrete and reinforced concrete products using SVITAP coatings
Manual for SNiP 3.09.01-85: Manual for heliothermal treatment of concrete and reinforced concrete products using film-forming compounds
Manual for SNiP II-22-81: Design and application of panel and brick walls with various types of cladding. Reference manual to SNiP
Manual for SNiP II-22-81: Manual for the design of stone and reinforced stone structures
MDS 12-23.2006: Temporary recommendations on the technology and organization of construction of multifunctional high-rise buildings and building complexes in Moscow
MDS 12-24.2006: Installation of ordinary, decorative and waterproofing plaster coatings of building facades
MDS 12-61.2012: The project for the production of works on the device of a rail track of a tower crane with a concrete beam BRP-62.8.3
MDS 31-12.2007: The floors of residential, public and industrial buildings using materials from the company "Henkel Bautechnik." Materials for design and working drawings of nodes
MGSN 2.08-01: Corrosion Protection of Concrete and Reinforced Concrete Structures for Residential and Public Buildings
MRDS 02-08: Manual on scientific and technical support and monitoring of buildings and structures under construction, including long-span, high-altitude and unique
MU 2.1.674-97: Sanitary and hygienic estimation of construction materials with use of industrial waste
ND 2-020301-002: Rules for the classification and construction of offshore subsea pipelines
ODM 218.2.002-2009: Guidelines for the use of modern materials in the mating pavement with the expansion joints of bridge structures
ODM 218.2.014-2011: Guidelines for the use of steel-fiber-concrete in the repair of bridge structures
ODM 218.2.016-2011: Guidelines for the design and installation of bored piles with increased bearing capacity along the ground
ODM 218.2.017-2011: Guidelines Design, construction and operation of roads with low traffic
ODM 218.2.026-2012: Design and calculation guidelines for pile-anchor structures of highways
ODM 218.2.031-2013: Guidelines for the use of fly ash and ash-and-slag mixtures from coal combustion at thermal power plants in road construction
ODM 218.2.035-2013: Recommendations for the use of fly ash in concrete foundations of roads
ODM 218.2.051-2015: Recommendations for the design and design of anti-tailing structures on highways
ODM 218.2.063-2015: Recommendations for the use of deep-mixing technology to strengthen the weak soils of the road bed
ODM 218.2.066-2016: Guidelines for the use of anchor piles and micropiles as part of the engineering protection of roads
ODM 218.3.012-2011: Cements for concrete coatings and road foundations
ODM 218.3.015-2011: Guidelines for the construction of cement concrete pavements in sliding forms
ODM 218.3.027-2013: Recommendations for the use of fabric composite materials in the repair of reinforced concrete structures of bridge structures
ODM 218.3.028-2013: Guidelines for the repair and maintenance of cement concrete pavements of roads
ODM 218.3.039-2014: Recommendations for testing film-forming materials for the care of freshly laid concrete
ODM 218.3.046-2015: Recommendations about technology of repair of water throughput pipes with use of composite materials
ODM 218.3.070-2016: Guidelines on formulation of self-compacting concrete with prescribed waterproof properties for bored piles
ODM 218.3.084-2020: Recommendations for the preparation and use of organic-mineral mixtures in the construction of structural layers of road pavements of capital and lightweight types
OSN-APK 2.10.03.001-04: Designing the integrated protection of reinforced concrete structures of industrial agricultural buildings and structures from the effects of corrosive environments
OSN-APK 2.10.22.001-04: Instructions for the use of local insulation materials in the construction of livestock buildings
OSN-APK 2.10.32.001-04: Instructions for the use of chemical additives in concrete and mortars for rural construction
OST 218.2.001-2002: Portland cement for concrete artificial constructions and road pavements of the St. Petersburg ring road. Specifications
OST 32.72-97: Reinforced concrete slabs without ballast bridge bed for metal superstructures of railway bridges. General specifications
OST 35-27.0-85: Reinforced concrete links of round and rectangular culverts under the railways and roads. Design and dimensions.
P 76-2000: Handbook for the design of concrete compositions for wear-resistant facings of hydraulic structures
PNST 213-2017: Nanomaterials. Fresh concrete nanomodified for protective concrete. Technical requirements and test methods
PNST 306-2018: Automobile roads of general use. Organo-mineral cold mixes with addition of recycled asphalt concrete pavement (RAP). Specifications
PNST 320-2018: Bearing structures of railway signaling devices. General technical requirements
PNST 322-2019: General automobile roads. Soils stabilized and fortified with inorganic binders. Technical specifications
PNST 326-2019: General automobile roads. Mixtures of crushed stone, gravel and sand, treated with inorganic binders. Technical specifications
PNST 371-2019: Public roads with low traffic density. Road clothes. Design and calculation
RD 12.13.055-87: Instructions for the preparation and use of concrete and mortar for mining coal mines
RD 12.18.076-88: Guidelines for the technology of preparation of concrete with chemical additives
RD 153-34.0-21.601-98: Model Guidelines for Operation of Process Buildings and Structures of Electric Power Facilities. Part II, Sections 1, 2
RD 153-34.2-21.544-2002: Guidelines for the chemical control of corrosion processes in water filtration through concrete and reinforced concrete hydraulic structures
RD 153-34.2-21.624-2003: Standard instructions for restoring and repairing seals for expansion joints of hydraulic structures
RD 153-34.2-21.625-2003: Typical instructions for cementation of cracks in concrete hydraulic structures
RD 31.11.21.13-96: Packaged freight shipping safety rules.
RD 31.35.13-90: Instructions for repair of hydraulic structures in maritime transport. Minmorflot, Soyuzmorniiproekt, 1990
RD 31.52.04-90: Polymer adhesive compositions. Application in ship repair. Technological requirements
RD EO 1.1.2.05.0696-2006: Guidelines for the construction and commissioning of the foundations of turbine units of nuclear power plants
RD EO 1.1.2.05.0697-2006: Guide to the construction and commissioning of reinforced concrete tower cooling towers of nuclear power plants
Recommendations: Aspiration smoke-sensitive alarms VESDA. Part 1. Scope
Resolution 2425: On approval of the single list of products subject to mandatory certification and the single list of products subject to declaration of conformity, amending the decree of the Government of the Russian Federation of December 31, 2020 N 2467 and repealing certain acts of the Government of the Russian Federation
RMD 31-04-2008 Sankt-Peterburg: Recommendations for construction of residential and public high-rise buildings
RMD 32-18-2012 Sankt-Peterburg: Recommendations for the use of paving in the paving of residential and public business areas
RMD 32-18-2016 St. Petersburg: Recommendations for the use of paving in the construction of pavements for residential and public and business buildings
RMD 52-01-2006 Sankt-Peterburg: Design and construction of enclosing structures of residential and public buildings using cellular concrete in St. Petersburg. Part I
RMD 52-12-2012 Sankt-Peterburg: Typical temporary concrete fences during work on the city’s road network
RSN 90-85 Gosstroj LitSSR: Instructions for the installation of monolithic floors of livestock buildings of sawdust-cement latex
RSN-88: Design and Construction of Roads and Highways in Non-Chernozem Areas of the RSFSR
RTM 17-01-2002: Guiding technical materials on the design and use of steel-fiber-concrete building structures
RTM 17-02-2003: Guiding technical materials on the design and manufacture of steel-fiber-concrete structures on fiber, cut from sheet
RTM 17-03-2005: Guiding technical materials on the design, manufacture and use of steel fiber concrete structures on steel wire fiber
RTM 36.44.12.2-90: Design and Installation of Foundations Using Pile Driven by Pushing
RTM 5-05-2009: Guiding technical materials for the design, manufacture and use of steel fiber concrete structures on the fiber of thin steel wire
RTM 75-95: Process Guidelines for Factory Production of Prefabricated Prestressed Reinforced Concrete Structures -
SN 277-80: Guidelines for the Fabrication of Cellular Concrete Products
SN 549-82: Guidelines for the Design, Fabrication, and Application of Structures and Products Made of Organic Fiber Reinforced Concrete (Arbolite)
SNiP 2.03.11-85: Corrosion protection of buildings structures
SNiP 3.03.01-87: Bearing and enclosing structures
SNiP 3.06.04-91: Bridges and pipes
SNiP 3.07.02-87: Hydraulic engineering marine and river transport facilities
SNiP 3.09.01-85: Precast reinforced concrete structure and work-piece production
SNiP 82-02-95: Federal (standard) element cement consumption rates at manufacture of concrete and reinforced concrete products and structures
SP 100.13330.2016: The reclamation systems and construction
SP 130.13330.2018: Production of prefabricated reinforced concrete structures and products
SP 229.1325800.2014: Reinforced concrete structures of underground and utility systems. Protection against corrosion
SP 243.1326000.2015: Design and construction of low-volume roads
SP 249.1325800.2016: Design and construction of underground utilities by closed and cut-and-cover methods
SP 250.1325800.2016: Building and structures. Protection against groundwater
SP 267.1325800.2016: High rise buildings and complexes. Design rules
SP 28.13330.2012: Corrosion protection of buildings structures. Updated living edition of SNiP 2.03.11-85
SP 287.1325800.2016: Marine berthing facilities. Rules of design and construction
SP 289.1325800.2017: Constructions cattle-breeding, poultry-breeding and beast-breeding. Design rules
SP 29.13330.2011: Floors
SP 32-101-95: Design and installation of the foundations of bridges in areas with permafrost
SP 357.1325800.2017: Concrete hydraulic structures. Rules of works and acceptance of works
SP 361.1325800.2017: Buildings and constructions. Protective measures in the zone of influence of construction of underground objects
SP 369.1325800.2017: Fixed offshore platforms. Design principles
SP 43.13330.2012: Structures for industrial installations
SP 435.1325800.2018: Monolithic concrete and reinforced concrete structures. Rules for the production and acceptance of work
SP 46.13330.2012: Bridges and pipes
SP 52-105-2009: Reinforced concrete structures in cold climates and on permafrost soils. (In the development of SNiP 52-01-2003 and SNiP 2.02.04-88)
SP 70.13330.2012: Bearing and enclosing structures. Updated living edition of SNiP 3.03.01-87
SP 72.13330.2016: Protection of buildings, facilities and structures against corrosion
SP 82-101-98: Preparation and use of masonry mortars. To replace SN 290-74. Letter № AB-20-218 / 12 dated 06.17.98.
SP 83.13330.2016: Industrial furnaces and brick chimneys
SP 99.13330.2016: On-farm roads in the collective and state farms and other agricultural enterprises and organizations
ST RK 1409-2005: Reinforced concrete road signs supports. Specification
STB 1081-97: Ferro-concrete sleepers, prestressed for 1520 mm gauge railways. Technical conditions
STO DOKTOR BETON 68686983-001-2011: Dry building mixtures trade mark "ДОКТОР БЕТОН®" for waterproofing and repair concrete construction. Classification. Nomenclature of indicators. Technical requirements
STO DOKTOR BETON 68686983-002-2011: Dry building mixtures trade mark "ДОКТОР БЕТОН®" for waterproofing and repair concrete construction. Technical specifications and quality characteristics
TR 101-99: Guide to Good Practice for Use of Grouts and Concretes With "Akvatron-6" Material for Road Construction
TR 120-01: Technical recommendations on the waterproofing of the underground part of buildings and structures using materials "Akvatron-6u", "Akvatron-8b", "Akvatron-12"
TR 121-01: Technical recommendations for mastic waterproofing of the internal surfaces of the underground part of buildings and structures
TR 126-01: Technical recommendations on the technology of application of various industrial wastes, dornita in road construction
TR 127-01: Technical recommendations on repair and restoration works of roads, sidewalks, platforms for various purposes with the complex improvement of courtyards
TR 135-02: Technical recommendations on the construction and technology of road construction in areas exposed to increased traffic loads
TR 136-03: Technical recommendations on the technology of stabilizing the structural layers of pavements, pavements, park paths and sidewalks using chemical reagents
TR 137-03: Technical recommendations on the use of dry specialized finishing mixtures for exterior and interior work in the construction of new buildings and structures, reconstruction and repair
TR 140-03: Technical recommendations on the technology of painting the interiors and facades of residential and public buildings under construction
TR 144-04: Technical recommendations on the use of waterproofing materials "Akvatron"
TR 147-03: Technical recommendations for the construction of road structures from cast concrete mixes
TR 149-03: Technical recommendations on the technology of using the complex of specialized finishing materials for the renovation of external and internal surfaces during reconstruction and major repairs of buildings
TR 166-04: Technical recommendations for quality assurance of concrete and mortar mixes and prevention of concrete corrosion in reinforced concrete structures
TR 172-05: Technical recommendations for the construction of urban roads with curved side stones
TR 182-08: Technical recommendations on scientific and technical support and monitoring of the construction of long-span, high-altitude and other unique buildings and structures
TR 192-08: Technical recommendations on the construction of foundations for intra-quarter roads, incl. under adverse hydrogeological conditions, the presence of underground utilities, trenches, pits
TR 50-180-06: Technical recommendations for the design and installation of pile foundations using discharge-pulse technology for high-rise buildings
TR 80-98: Recommended Practice for Concrete Laying Process by Unheated Method of Cast-in-Place Structures Using Thermos and Accelerated Thermos
TR 86-98: Guide to Good Practice for Use of Dispersed Reinforced Concrete Mixes for Construction of Cast-in-Place High-Reliability Urban Roadbeds and Pavements
TR 92-99: Technical recommendations on the use of the mineral expanding additive to cements IR-1
TR 97-99: Guide to Good Practice for Comprehensive Site Improvements and Amenities for Residential Complexes
TR 99-99: Technical recommendations on the use of waterproofing mortars and concrete with the material "Akvatron-6" for underground construction
TSN 20-303-2006: Protection of building structures, buildings and structures from aggressive chemical and biological environmental influences. St. Petersburg
TSN 40-303-2003: Trenchless Installation of Utility Lines Using Microtunneling Complexes and Rehabilitation of Pipelines Using Special Equipment
TSN 50-303-99: Design and Installation of Shallow Foundations for Low-Rise Dwellings in the Moscow Region
TSN 52-302-2003: Corrosion Protection of Concrete and Reinforced Concrete Structures of Transport Facilities
TU 102-300-81: Weights prefabricated reinforced concrete covering type UBO
TU 102-454-88: Expanded clay and concrete for building envelopes. Technical specifications
TU 102-541-89: Garage assembly individual use of ash and slag concrete
TU 102-737-95: Concrete marsh weighting compounds wedge-shaped for pipes with a diameter of 426, 325, 219 (ZUBKm)
TU 102-738-95: Weighted reinforced concrete marsh wedge with a diameter of 530, 426, 525 with low steel reinforcement consumption (1 UBKm, 2 UBKm)
TU 1390-003-86695843-2010: Steel pipes and fittings with internal anti-corrosion cement-sand coating
TU 1461-037-50254094-2004: High-strength cast iron pressure pipes. Technical conditions
TU 218 RSFSR 620-90: Hard concrete mixes for the construction of cement concrete pavements and foundations of roads and airfields
TU 33-82-86: Plates flat with reinforcement outlets
TU 34-12-11410-89: Racks of reinforced concrete CB95-1, CB95-1-a, CB95-2, CB95-2-a
TU 36-16-22-23-88: Limestone-Silica Lining Panels with Protective Layer (PFI, PFIm)
TU 36-16-22-46-90: Textolite glass cement for heat-insulating structures
TU 4859-002-03984155-99: Steel Pipes with Thermal Insulating and Waterproofing Coatings. Technical Specifications
TU 5718-001-53737504-00: Mineral-Emulsion Mixes for Abrasion-Resistant Coatings
TU 5741-001-41927111-96: Cellular Concrete Wall Blocks and Slabs. Technical Specifications
TU 5745-001-01386160-001: Dispersed concrete mixes-reinforced with steel fiber milled from slab
TU 5760-160-00284807-96: Polystyrene Concrete Thermal Insulating Slabs. Technical Specifications
TU 5851-008-01388383-2002: Reinforced concrete beams with frame fittings for the superstructure of road bridges and overpasses with a length of 12, 15 and 18 m. Specifications
TU 5853-001-04000633-2006: Adjustable tip manholes. Technical conditions
TU 5859-002-59565714-2012: Concrete protective flexible universal slabs
TU 5870-001-21655395-2000: Cellular Concrete. Technical Specifications
TU 67-1003-88: Lattice arched beams prestressed with a span of 12 m
VNTP 06-91: Departmental norms for the technological design of cement plants
VNTP 1-90/Mintransstroj, MPS: Departmental rules for the process design of heat treatment procedures for reinforced concrete bridge structures
VSN 104-93: Design and Installation Standards for Waterproofing for Subway Tunnels Constructed Using Opencast Method
VSN 126-90: Anchored Cast-In-Place Concrete Tunnel Lining for Transportation Tunnels and Subways. Design and Execution Standards
VSN 132-92: Execution and Acceptance Requirements for Injection Grouting Behind Tunnel Liner
VSN 150-68: Technical guidelines for improving the frost resistance of concrete transport structures
VSN 150-93: Guidelines for the Improvement of Frost Resistance of Concrete Used in Transportation Construction
VSN 164-69: Technical guidelines for the installation of cement-reinforced road foundations made of debris
VSN 16-95: Industry-Specific Building Code. Guidelines on the Use of Rolled Lean-Mix Concrete in Road Pavements
VSN 184-75: Technical guidelines for the installation of pavement bases made of stone materials, not reinforced and fortified with inorganic binders
VSN 198-88: Cold-Weather Construction of Reinforced Roadbeds for Precast Reinforced Concrete Road Pavements at Oil Fields in Western Siberia
VSN 212-91: Use of Natural-Porous-Aggregate Concrete in Transportation Tunnel Construction
VSN 261-86: Laying Concrete by Vibration Method Under Water and Clay Mixture
VSN 27-76: Technical Instructions for the Use of Bitumen Sludges for Arrangement of Protective Layers on Roads
VSN 33-95: Guidelines for Use of Chemical Admixtures in Cement Grouts for Erection of Residential and Public Occupancies in Winter
VSN 34-91/MT-st: Execution and Acceptance Requirements for New Construction, Rehabilitation, and Expansion of Existing Marine and River Hydraulic Transport Structures. Part I: Part II: Part III
VSN 3-94: Industry-Specific Building Code for the Installation of Underground Cold Water Supply Pipelines Made of Steel Pipe 300-600 mm in Diameter with Internal Cement-Sand Insulation
VSN 40-88: Design and Installation of Soil-Cement Foundations for Low-Rise Buildings Constructed in Rural Areas
VSN 46-96: Instruction on preparation and use of concrete with sodium nitrite additive in winter conditions
VSN 48-93: Installation Manual for Cast-In-Place Concrete and Reinforced Concrete Tunnel Lining for Transportation Tunnels
VSN 51-96: Instruction on construction technology of municipal roads in winter time
VSN 56-97: Design and Basic Principles for Technology for Production of Fiber Reinforced Concrete Structures
VSN 61-97: Process Guidelines for Construction of Decorative Concrete Road Pavements
VSN 62-97: Process Guidelines for the Use of Adjustable Heads on Inspection Manholes During Rehabilitation and Repair of Urban Roads
VSN 66-97: Instructions for arranging self-leveling screeds using dry cement-sand mixtures
VSN 6-94: Guidelines for the Use of Percolation Slabs in Wall and Slab Drains for Buildings and Non-Building Structures
VSN 7-94: Guidelines for the Application of Poured Concrete Mixtures in Road Construction
VSN 83-92: Technical instructions for the use of concrete and cement-sand mortars hardening in the frost, in the construction of artificial structures
VSN 9-94: Flooring Guidelines for Residential and Public Buildings
VSN-1-90: Technological rules for the manufacture of centrifuged racks of contact network supports, communication lines and self-locking
VSP 02.01.32/Russian Defense Ministry: Rules for the production and acceptance of work in the construction of aerodromes of the Armed Forces of the Russian Federation
VSP 103-97: Steel Fiber Reinforced Concrete Enclosures for Secure Spaces in Russian Federation Central Bank Facilities. Execution, Quality Control, and Acceptance Requirements
Customers Who Viewed This Item Also Viewed:
|
Building materials. Methods for combustibility test
Language: English |
Building materials spread flame test method
Language: English |
Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V. Non-sheathed cables for fixed wiring
Language: English |
Clear sheet glass. Specifications
Language: English |
Steel welded vessels and apparatus. General technical conditions
Language: English |
System of Standards for Occupational Safety and Health (SSBT). Personal protective equipment for respiratory organs. Self-rescuers insulating on chemically bound or with compressed oxygen. Technical requirements. Test methods. Marking. Sampling rules
Language: English |
|
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.