PND F T 14.1:2:3:4.10-2004
ПНД Ф Т 14.1:2:3:4.10-2004
|
|
Toxicological methods of analysis. Methods for determining the toxicity of drinking, natural and waste waters, water extracts from the soil, sewage sludge and production and consumption waste by changing the optical density of the chlorella algae culture
Токсикологические методы анализа. Методика определения токсичности питьевых, природных и сточных вод, водных вытяжек из почв, осадков сточных вод и отходов производства и потребления по изменению оптической плотности культуры водоросли хлорелла (Сhlоrellа
Status: Not effective
The document establishes a method for determining the acute toxicity of surface fresh, groundwater, drinking water, wastewater, water extracts from the soil, sewage sludge and production and consumption waste by changing the optical density of the Chlorella Vulgaris green test canal culture in laboratory conditions. The optical density of the algae test culture after 22 hours of growth is measured using a photoelectrocolorimeter.
Документ устанавливает методику определения острой токсичности проб поверхностных пресных, грунтовых, питьевых, сточных вод, водных вытяжек из почвы, осадков сточных вод и отходов производства и потребления по изменению оптической плотности тест-культуры зеленой протококковой водоросли хлорелла (Chlorella vulgaris Beijer) в лабораторных условиях. Оптическая плотность тест-культуры водоросли после 22 часов роста измеряется с помощью фотоэлектроколориметра.
Choose Language:
Format: Electronic (pdf/doc)
Approved: Federal State Institution Federal Center for Analysis and Assessment of Technogenic Impact,
12/10/2012
SKU: RUSS162533
The Product is Contained in the Following Classifiers:
Construction (Max) »
Regulations »
Regulatory documents of supervisory authorities »
Normative documents of Ministry of Environmental Protection and Natural Resources of Russian Federation »
PromExpert »
SECTION V. ENVIRONMENTAL PROTECTION. NATURE USE »
II Ensuring environmental safety »
3 Hazardous Waste Management »
3.1 Waste Management »
3.1.2 Industrial and public control infield of waste management »
PromExpert »
SECTION V. ENVIRONMENTAL PROTECTION. NATURE USE »
II Ensuring environmental safety »
2 Protection and protection of surface water bodies »
2.2 Rationing impact on water bodies »
2.2.1 Rationing of quality of water bodies »
2.2.1.1 General requirements for composition and properties of surface waters »
PromExpert »
SECTION V. ENVIRONMENTAL PROTECTION. NATURE USE »
II Ensuring environmental safety »
2 Protection and protection of surface water bodies »
2.1 Management in use and protection of water bodies »
2.1.2 Production and public control infield of use and protection of water bodies »
PromExpert »
SECTION V. ENVIRONMENTAL PROTECTION. NATURE USE »
II Ensuring environmental safety »
2 Protection and protection of surface water bodies »
2.1 Management in use and protection of water bodies »
2.1.1 State supervision and environmental monitoring infield of use and protection of water bodies »
PromExpert »
SECTION V. ENVIRONMENTAL PROTECTION. NATURE USE »
I Environmental-legal and economic-legal mechanisms for environmental protection »
1 Management infield of environmental protection and environmental management »
1.5 Environmental monitoring and control »
ISO classifier »
13 ENVIRONMENTAL PROTECTION, HUMAN PROTECTION AGAINST ENVIRONMENTAL IMPACT. SECURITY »
13.060 Water quality »
13.060.30 Wastewater »
ISO classifier »
13 ENVIRONMENTAL PROTECTION, HUMAN PROTECTION AGAINST ENVIRONMENTAL IMPACT. SECURITY »
13.060 Water quality »
13.060.50 Examination of water to determine content of chemicals »
The Document is Replaced With:
PND F T 14.1:2:3:4.10-04: Toxicological control methods. Measurement method of the optical density of the culture of chlorella alga (Chlorella Vulgaris Beijer) to determine the toxicity of drinking, fresh natural and wastewater, water extracts from soils, soils, sewage sludge, pro
The Document References:
FR 1.39.2007.03223: Biological control methods. Methods for determining the toxicity of water, water extracts from the soil, sewage sludge and waste by changing the level of chlorophyll fluorescence and the number of algae cells
GOST 12.0.004-90: Organization of training for labor safety. General rules
GOST 12.1.004-91: Fire safety. General requirements
GOST 12.1.005-88: General sanitary requirements for working zone air
GOST 12.1.007-76: Noxious substances. Classification and general safety requirements
GOST 12.4.009-83: Fire-fighting equipment for protection of units. Basic types. Location and maintenance
GOST 12.4.103-83: Occupational safety standards system. Special protective clothes, personal means of hand and legs protections. Classification
GOST 12071-84: Soils. Sampling, packing, transportation and keeping of samples
GOST 15150-69: Machines, instruments and other industrial products. Modifications for different climatic regions. Categories, operating, storage and transportation conditions as to environment climatic aspects influence
GOST 17.1.5.04-81: Nature protection. Hydrosphere Apparatus and mechanisms for selection? Initial treatment and storing samples of natural waters. General technical conditions
GOST 17.1.5.05-85: Nature protection Hydrosphere General requirements for surface and sea waters, ice and atmospheric precipitation sampling
GOST 17.4.3.01-83: Nature protection. Soils. General requirements for sampling
GOST 17.4.3.02-85: Nature protection. Soils. Requirement for fertile layer conservation in performing earth-moving
GOST 17.4.3.03-85: Nature protection. Soils. General requirements for methods of determining contaminants
GOST 17.4.4.02-84: Nature protection. Soils. Methods for sampling and preparation of soils for chemical, bacteriological, helminthological analysis
GOST 1770-74: Laboratory volumetric glassware. Cylinders, beakers, measuring flasks, test tubes. General specifications
GOST 20010-93: Industrial rubber gloves
GOST 2517-85: Crude oil and petroleum products. Methods of sampling
GOST 25336-82: Laboratory glassware and equipment. Basic parameters and dimensions
GOST 26423-85: Soils. Methods for determination of specific electric conductivity, pH and solid residue of water extract
GOST 26428-85: Soils. Methods for determination of calcium and magnesium in water extract
GOST 27753.1-88: Greenhouse grounds. Sampling
GOST 28168-89: Soils. Sampling
GOST 28498-90: Liquid-in-glass thermometers
GOST 29227-91: Laboratory glassware. Graduated pipettes. Part 1. General requirements
GOST 3118-77: Reagents. Hydrochloric acid. Specifications
GOST 4198-75: Reagents. Potassium dihydrogen phosphate. Specifications
GOST 4217-77: Reagents. Potassium nitrate. Specifications
GOST 4328-77: Reagents. Sodium hydroxide. Specifications
GOST 4456-75: Reagents. Cadmium sulphate. Specifications
GOST 4461-77: Reagents. Nitric acid. Specifications
GOST 4523-77: Reagents. Magnesium sulphate 7-aqueous. Specifications
GOST 5180-84: Soils. Laboratory methods for determination
GOST 612-75: Reagents. Manganese chloride 4-aqueous. Specifications
GOST 6709-72: Distilled water. Specifications
GOST 7328-2001: Weights. General specifications
GOST 9336-75: Reagents. Ammonium metavanadate. Specifications
GOST 9656-75: Reagents. Boric acid. Specifications
GOST ISO/IEC 17025-2009: General requirements for the competence of testing and calibration laboratories
GOST R 12.1.019-2009: Occupational safety standards system. Electrical safety. General requirements and nomenclature of kinds of protection
GOST R 12.4.013-97: Occupational safety standards system. Goggles. General specifications
GOST R 51592-2000: Water. General requirements for sampling
GOST R 51593-2000: Drinking water. Sampling
GOST R 53228-2008: Non-automatic weighing instruments. Part 1. Metrological and technical requirements. Tests
GOST R 8.563-2009: State system for ensuring the uniformity of measurements. Procedures of measurements
GOST R ISO 5725-6-2002: Accuracy (trueness and precision) of measurement methods and results. Part 6. Use in practice of accuracy values
GOST R ISO/IEC 17025-2006: General requirements for the competence of testing and calibration laboratories
MI 2881-2004: Recommendation. GSE. Methods of quantitative chemical analysis. Procedures for testing the acceptability of analysis
MU 2.1.7.730-99: Hygienic evaluation of soil in residential areas
PND F 12.15.1-08: Guidelines for sampling for sewage analysis.
R 50.2.008-2001: National System for Standardization of Measurements. Techniques for Chemical Quantitative Analysis. Scope and Procedure for Execution of Metrological Expert Review
|
Customers Who Viewed This Item Also Viewed:
 |
Liquid lubricating and plastic materials. Method of test for lubricating properties on four ball machine
Language: English |
Armour clothes. Classification and general technical requirements
Language: English |
Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V. Non-sheathed cables for fixed wiring
Language: English |
Food products. Methods for detection and quantity determination of coliformes
Language: English |
Natural gas. Methods of calculation of physical properties. Calculation of physical properties on base information on density of standards conditions and nitrogen and carbon dioxide contents
Language: English |
Hotels design
Language: English |
Railroad rails. General specifications
Language: English |
Potassium chloride
Language: English |
Controllers acting without
Language: English |
 |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.
