GOST 23478-79
ГОСТ 23478-79
|
|
Form for monolithic concrete and reinforced concrete structures erection. Classification and general technical requirements
Опалубка для возведения монолитных бетонных и железобетонных конструкций. Классификация и общие технические требования
Status: Not effective - Canceled in the Russian Federation. IUS 9-2003
The standard applies to the formwork for the construction of monolithic concrete and reinforced concrete structures, consisting of forming and supporting elements that provide the design dimensions of structures. The standard does not apply to single-use removable formwork for the construction of individual and unique monolithic structures, as well as to special formwork and formwork used as additional elements.
Стандарт распространяется на опалубку для возведения монолитных бетонных и железобетонных конструкций, состоящую из формообразующих и поддерживающих элементов, обеспечивающих проектные размеры конструкций. Стандарт не распространяется на съемную опалубку разового применения для возведения индивидуальных и уникальных монолитных конструкций, а также на специальную опалубку и опалубку, применяемую в качестве доборных элементов.
Choose Language:
Format: Electronic (pdf/doc)
Approved: State Committee of the Council of Ministers of the USSR for Construction,
1/19/1979
SKU: RUSS16258
The Product is Contained in the Following Classifiers:
Construction (Max) »
Regulations »
Documents System of normative documents in construction »
7. Normative documents for mobile buildings and structures, equipment, inventory and tools »
K.71 Equipment of construction organizations »
ISO classifier »
91 CONSTRUCTION MATERIALS AND CONSTRUCTION »
91.220 Construction equipment »
National standards »
91 CONSTRUCTION MATERIALS AND CONSTRUCTION »
91.220 Construction equipment »
National Standards for KGS (State Standards Classification) »
Latest edition »
Zh Construction and building materials »
Zh3 Building structures and parts »
Zh33 Stone, brick, concrete and reinforced concrete structures and parts »
National Standards for OKSTU »
REINFORCED CONCRETE STRUCTURES AND PARTS (INCLUDING REINFORCED CONCRETE CONCRETE PRODUCTS) »
Reinforcement for structures. Forms and equipment for the production of structures »
The Document References:
GOST 5264-80: Manual arc welding. Welding joints. Main types, design elements and dimensions
GOST 1050-74: High-grade constructional carbon steel
GOST 1050-88: Carbon structural quality steel gauged bars with special surface finish. General specifications
GOST 10632-77: Particle boards. Specification
GOST 10632-89: Wood particle boards
GOST 11539-73: Bakelite resin plywood
GOST 11539-83: Bakelite resin plywood
GOST 13168-69: Preservation of metal products (including large-size ones)
GOST 14637-69: Steel thick-plate and broadband (universal) carbonaceous of ordinary quality. Technical requirements
GOST 14637-89: Thick sheet rolled stock of normal quality carbon steel
GOST 16523-70: Rolled sheets from carbon quality and ordinary steel for general purposes. Specification
GOST 19414-90: Solid glued wood. General requirements for glued finger joints
GOST 21779-76: System for ensuring geometric accuracy in construction. Technological tolerances of geometric parameters
GOST 21779-82: System of ensuring of geometrical parameters accuracy in construction. Manufacturing and assembling tolerances
GOST 22753-77: Preparation of surfaces of building structures for painting and wallpapering. Typical technological processes
GOST 2695-71: Sawn timber of leaf-bearing species
GOST 2695-83: Sawn timber of leaf-bearing species
GOST 380-71: Common quality carbon steel. Grades
GOST 3916.2-89: Plywood with outer layers of coniferous veneer for general use. Specifications
GOST 3916-69: Plywood. Specification
GOST 4598-74: Fibre board. Technical requirements
GOST 4598-86: Fibre boards. Specifications
GOST 5264-69: Seams of welded connections. Manual arc welding. Main types and structural elements
GOST 8486-66: Lumber from softwood
GOST 8486-86: Coniferous sawn timber. Specifications
GOST 8713-70: Seams of welded connections. Automatic and semi-automatic submerged arc welding. Main types and structural elements
GOST 8713-79: Flux welding. Welded joints. Maih types design elements and dimensions
GOST 9.014-78: Unified system of corrosion and ageing protection. Temporary corrosion protection of products. General requirements
GOST 9463-72: Round timber of coniferous species
GOST 9463-88: Round wood products
SNiP 3.04.01-87: Insulation and finishing coatings
The Document is Referenced By:
GOST 23477-79: Collapsible travelling small panel inventory form for monolithic concrete and reinforced concrete. Specifications
Manual: Manual for impulse and low consumption fire extinguishing systems
MDS 12-65.2014: Project production work. Concreting of reinforced concrete structures of a building (structure) using concrete pumps
OST 36-100.3.06-85: Occupational safety standards system. Special works on the erection of high-level reinforced concrete structures. Safety requirements.
RD EO 1.1.2.05.0696-2006: Guidelines for the construction and commissioning of the foundations of turbine units of nuclear power plants
SNiP 2.03.01-84 Reference Manual: Reference manual on design of concrete and reinforced concrete structures made of heavy and light concrete without reinforcement prestressing
SNiP 3.03.01-87: Bearing and enclosing structures
SNiP 3.06.04-91: Bridges and pipes
SNiP 3.07.01-85: Hydraulic engineering river constructions
SNiP 3.07.02-87: Hydraulic engineering marine and river transport facilities
SNiP 52-01-2003: Concrete and ferroconcrete structures. Principal rules
VSN 203-84: Safety Requirements for the Construction of Hi-Rise Reinforced Concrete Structures
VSN 212-91: Use of Natural-Porous-Aggregate Concrete in Transportation Tunnel Construction
VSN 31-83: Execution Requirements for Concrete Work for Construction of Hydraulic Structures
VSN 34-91/MT-st: Execution and Acceptance Requirements for New Construction, Rehabilitation, and Expansion of Existing Marine and River Hydraulic Transport Structures. Part I: Part II: Part III
VSN 40-84(r)/Gosgrazhdanstroj: Technical rules for spending of basic construction materials for the overhaul of residential buildings and utilities
VSN 48-93: Installation Manual for Cast-In-Place Concrete and Reinforced Concrete Tunnel Lining for Transportation Tunnels
VSN 56-97: Design and Basic Principles for Technology for Production of Fiber Reinforced Concrete Structures
VSP 103-97: Steel Fiber Reinforced Concrete Enclosures for Secure Spaces in Russian Federation Central Bank Facilities. Execution, Quality Control, and Acceptance Requirements
|
Customers Who Viewed This Item Also Viewed:
 |
Jet fuels
Language: English |
State system for ensuring the uniformity of measurements. Measurements of liquids and gases flow rate and quantity by means of orifice instruments. Part 5. Measurement procedure
Language: English |
Molded parts of coupler and automatic coupler devices of railway rolling stock. General specifications.
Language: English |
Main-line diesel locomotives. General technical requirements.
Language: English |
Four-wheel bogies of freight cars for mainline railways gauge 1520 (1524) mm. Specifications
Language: English |
Technical ethylcellosolve. Specifications
Language: English |
Automatic coupler model SA-3 and its components. Design and dimensions
Language: English |
Railway rolling stock. Devices to prevent running gear parts from dropping to the track. Methods of controlling strength characteristics
Language: English |
Electric heating devices for heating rolling stock railways. Safety requirements and test methods
Language: English |
Ice cream. General technical requirements
Language: English |
Welded joints in steel structures of railway rolling stock. Requirements for design, implementation and quality control
Language: English |
Locomotives The method of dynamic strength tests
Language: English |
Pipe fittings. Ball valves made of brass. General specifications
Language: English |
Railway rolling stock. Norms for permissible exposure of railway track and test methods
Language: English |
Locomotives. Requirements for strength and dynamic qualities
Language: English |
 |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.
