Seamless hot-deformed steel pipes. Range of sizes
Трубы стальные бесшовные горячедеформированные Сортамент
Status: Effective - Supersedes. The limitation of the effectiveness period has been lifted: Protocol No. 3-93 of the IGU dated 03.03.93 (IUS 5-6-1993)
The standard applies to hot-rolled seamless steel pipes of general purpose, manufactured on the outer diameter, wall thickness and length.
Стандарт распространяется на горячедеформированные бесшовные стальные трубы общего назначения, изготовляемые по наружному диаметру, толщине стенки и длине.
Format: Electronic (pdf/doc)
Page Count: 16
Approved: State Committee of Standards of the Council of Ministers of the USSR,
The Product is Contained in the Following Classifiers:
Construction (Max) »
Other state standards used in construction »
23 Hydraulic and pneumatic systems and components for general use. »
Standards for pipe fittings (TPA) »
10. Production »
10.2 Billets (forgings, stampings, rolling, castings, etc.) »
ISO classifier »
23 HYDRAULIC AND PNEUMATIC SYSTEMS AND GENERAL PURPOSE COMPONENTS »
23.040 Pipelines and their components »
23.040.10 Cast iron and steel pipes »
National standards »
23 HYDRAULIC AND PNEUMATIC SYSTEMS AND GENERAL PURPOSE COMPONENTS »
23.040 Pipelines and their components »
23.040.10 Cast iron and steel pipes »
National Standards for KGS (State Standards Classification) »
Latest edition »
V Metals and metal products »
V6 Pipes metal and pipe products »
V62 Steel pipes and their connecting parts »
As a Replacement Of:
GOST 8732-70: Pipes of steel, seamless hot-rolled. Range
The Document References:
GOST 8731-74: Seamless hot-deformed steel pipes. Specifications
GOST 9567-75: Precision steel tubes. Range
The Document is Referenced By:
ATK 26-01-1-89: Pipeline viewing lights. Types and designs
GOST 11127-78: Wooden drums for wire ropes. Specifications
GOST 11265-73: Bitts. Specifications
GOST 12.2.008-75: Equipment and facilities for gas-flame treatment of metals and thermal
GOST 12.2.060-81: Acetylene pipelines
GOST 14114-85: Vessels attaching rigs. Erection lugs. Design and dimensions
GOST 14115-85: Vessels attaching rigs. Oblong erection lugs. Design and dimensions
GOST 14116-85: Vessels attaching rigs. Election lugs. Technical requirements
GOST 14839.19-69: Industrial explosives. Methods of full detonation determination
GOST 15876-90: Gauges for products made from wood and wooden materials
GOST 16339-70: Support holders for a 250 and 500 kg force rolling heads. Construction and dimensions
GOST 16340-70: Support holders for 1000 and 2000 kg force rolling heads. Construction and dimensions
GOST 16341-70: Support holder for a 4000 kg force rolling head. Construction and dimensions
GOST 17380-83: Seamless welded steel pipeline components for Pn £ 10 MPa (£ 100 kgf/cm2). Specifications
GOST 18437-73: Notched straight-side cone centre arbors. Design and dimensions
GOST 19535-74: Flange joints for hydraulic and lubricating systems. Specifications
GOST 21963-82: Cutoff wheels
GOST 21987-76: Commercial explosives. Granulites. Specifications
GOST 22190-83: Disk spring buffers for sheet stamping dies. Design and dimensions
GOST 22779-77: Accessories for vertical cylindrical storage tank for petroleum products. Siphon taps. Basic parameters and dimensions. Technical requirements
GOST 23061-2012: Soils. Methods for radioisotope measurement of density and humidity
GOST 23061-90: Soils. Methods for radioisotope measurement of density and humidity
GOST 23270-78: Pipe-billets for machining. General specifications
GOST 23270-89: Tube-billets for machining
GOST 24638-85: Annular diamond drills for reinforced concrete constructions
GOST 25.503-80: Strength calculation and testing. Methods of mechanical testing of metals compression test method
GOST 25449-82: Water and steam heat exchangers. Types, basic parameters and sizes
GOST 25573-82: Freight handling rope slings for construction
GOST 27590-2005: House-tube water-watered heat supply systems. General specifications
GOST 3050-77: Hose joints for flexible hoses
GOST 30564-98: Seamless hot-worked carbon and alloy steel pipes and tubes with special properties. Specifications
GOST 31445-2012: Steel and cast iron tubes and pipes with protective coatings. Technical requirements
GOST 32935-2014: Steel bellows expansion joints for heat networks. General specifications
GOST 32947-2014: Automobile roads of general use. Supports of stationary electric lighting. Technical requirements
GOST 33327-2015: Railway bus. General technical requirements
GOST 33852-2016: Pipeline valves. Knife gate valves for trunk pipelines. General specifications
GOST 34029-2016: Pipeline accessories. Check fittings for main oil pipelines and oil product pipelines. General specifications
GOST 34802-2021: Gas distribution systems. Coatings of extruded polyethylene for steel pipes. General technical requirements
GOST 3726-67: Accessories for vertical cylindrical storage tank for petroleum products. Siphon taps
GOST 3849-78: Accessories for vertical cylindrical strorace tank for pertoleum products. Cast iron joints for swing tube
GOST 4039-48: Benzenes. Method for determining the duration of the induction period
GOST 4609-49: Filling-draining equipment for flammable and highly inflammable liquids. Single filling-draining standpipe with manual pump
GOST 4610-49: Filling-draining equipment for flammable and highly inflammable liquids. Powered single filling-draining standpipe
GOST 4621-79: Accessories for horizontal cylindrical storage tanks for petroleum products. Receiving and distributing sleeve. Technical requirements
GOST 4624-70: Equipment for horizontal tanks for petroleum products. Ventilating tip
GOST 5332-75: Rollers and spacings of roll tables of rolling mills. General specifications
GOST 550-75: Seamless steel tubes for petroleum processing and petrochemical industry. Specifications
GOST 5654-76: Steel seamless hot-shaped pipes for shipbuilding
GOST 7075-80: Manual Traveling Underrunning Cranes Specifications
GOST 8731-74: Seamless hot-deformed steel pipes. Specifications
GOST 9567-75: Precision steel tubes. Range
GOST R 51383-2012: Automatic burner gas forced air. Technical safety requirements and test methods
GOST R 52209-2004: Hose assemblies for gas burners and gas appliances. General technical requirements and test methods
GOST R 52649-2006: Rigging for timber floating of types 'KF' and 'KR'. General specifications
GOST R 52664-2010: Welded pipe sheet piles. Specifications
GOST R 53192-2008: Welded steel structures of freight cars. Technical requirements
GOST R 53384-2009: Steel and cast iron tubes and pipes with protective coatings. Technical requirements
GOST R 53675-2009: National standard of the Russian Federation. Pumps for the trunk oil pipelines. General Requirements
GOST R 53676-2009: Filters for the trunk oil pipelines. General requirements
GOST R 54750-2011: Railway bus. General technical requirements
GOST R 55020-2012: Pipeline valves. Knife gate valves for trunk pipelines. General specifications
GOST R 55474-2013: Gas distribution systems. Requirements for gas distribution networks. Part 2. Steel gas pipelines
GOST R 55474-2019: Gas distribution systems. Gas distribution networks of natural gas. Part 2. Steel gas pipelines
GOST R 55601-2013: Heat exchanger apparatuses and air cooling apparatuses. Tube expanding in tube-sheets. General technical requirements
GOST R 55778-2013: Jet guns. Technical conditions
GOST R 56685-2015: Trunk pipelines for oil and oil products transportation. Fittings for diameters from 530 to 1220 mm. General specifications
GOST R 57991-2017: Trunk pipeline transport of oil and oil products. Steel piles of pipes used for foundation construction of above-ground pipelines supports. General specifications
GOST R 58095.0-2018: Gas distribution systems. Requirements for gas consumption networks. Part 0. General
GOST R 58753-2019: Cargo rope slings for construction. Technical specifications
GOST R 8.965-2019: State system for ensuring uniformity of measurements. Acoustic emission devices, information-measuring systems and complexes. Verification Method
KPO 04.03.13-06: Catalog-list of equipment. Instruments for measuring and regulating the flow, quantity, level and composition of a substance
Manual: Manual for impulse and low consumption fire extinguishing systems
Manual for SNiP 2.02.01-83: Manual on the design of protection of mine workings from underground and surface waters and water reduction during the construction and operation of buildings and structures
Manual for SNiP 2.02.01-83: Guide to designing the foundations of buildings and structures
Manual for SNiP II-25-80: Design Guide for Wooden Structures
Manual for SNiP II-37-76: Manual for the use of steel pipes for the construction of gas supply systems
MDS 12-56.2010: Wire rope slings for construction. Recommendations for compilation of technical specifications
MDS 40-2.2000: Design Manual for Self-Contained Utility Systems (Water Supply, Sewerage, Piped Heat Supply and Ventilation, Gas Supply, and Electricity Supply Systems) for Single-Dwelling and Multiple-Dwelling Residential Occupancies
MI 1069-85: State system for ensuring uniformity of measurements. Methodical instructions. Machine-oriented data recording system for metals (alloys)
NPB 88-2001*: Fire extinguishing and alarm systems. Norms and design rules
NTPD-90: Norms of technological design of diesel power plants
ODM 218.2.026-2012: Design and calculation guidelines for pile-anchor structures of highways
ODM 218.2.090-2017: Guidelines for the use of tubular welded grooves in the construction of roads
OST 102-55-81: Parts of trunk pipelines, steel welded on Ru to 10.0 MPa (100 kgf
OST 108.101.101-76: Water-steam heaters. Casings. Design and dimensions.
OST 108.101.106-76: Water-steam heaters. Aft water chambers (with flat bottom, two-way). Design and dimensions.
OST 108.101.107-76: Water-steam heaters. Aft water chambers (with flat bottom, four-way). Design and dimensions.
OST 108.101.110-76: Water-steam heaters. Covers. Design and dimensions.
OST 108.101.111-76: Water-steam heaters. Covers. Design and dimensions.
OST 108.313.101-76: Water-steam heaters. Casings. Unions. Design and dimensions.
OST 108.313.103-76: Water-steam heaters. Casings, branch pipes with flanges. Unions. Design and dimensions.
OST 108.318.103-76: Water-steam heaters. Casings. Tubing. Design and dimensions.
OST 108.318.104-76: Water-steam heaters. Forward water chambers . Tubing. Design and dimensions.
OST 108.318.105-76: Water-steam heaters. Forward water chambers . Connecting branch. Design and dimensions.
OST 153-34.0-1004-99A: Assembly units and suspension parts of nuclear power plant station pipelines Py <= 4.0 MPa (40 kgf/cm2). Suspension block spring. Design and dimensions
OST 153-34.0-1004-99А: Assembling units and station pipeline hang details of nuclear power plants. Nominal pressure is no more than 4,0 MPa. Spring bloc of hang. Design and dimensions.
OST 153-34.0-1006-99A: Assembly units and suspension parts of nuclear power plant station pipelines Py <= 4.0 MPa (40 kgf/cm2). Suspension block spring support. Design and dimensions
OST 26-01-1159-75: Pipe input-outputs of steel welded containers and devices. Technical requirements.
OST 26-07-2027-80: Symbols of materials in the design documentation.
OST 26-17-01-83: Heat exchangers and standard air cooling devices. Technical requirements to a bead forming with torque limiting.
OST 3-1686-90: Billets made of structural steel for engineering. General Specifications.
OST 34-10-701-97: Parts of seamless steel welded pipelines on Rrab <2.2 MPa (22 kgf
OST 34-266-75: Supports and suspensions of station pipelines Py <= 40 kgf/cm2 (4 MPa). Supports steeply bends. Design and dimensions
OST 36-145-88: Steel technological pipelines for pressure Ру up to 10 MPa. Fluxing automatic arc welding. Typical technological process.
OST 36-146-88: Bearings for steel industrial pipelines for P 10 MPa. Specifications.
OST 36-41-81: Welded and bent details pipelines made of carbon steel with Dy up to 500 mm, for Py up to 10 MPa (100 kg/cm2). Types and basic parameters.
PB 03-108-96: Process pipeline design and safe operation rules
PB 11-401-01: Safety regulations for gas-handling facilities of metallurgic and coke-chemical industries and enterprises
PGVU 090-93: Dust-gas and air pipelines of thermal power plants. General technical requirements
PNST 320-2018: Bearing structures of railway signaling devices. General technical requirements
R 412-81: Recommendations for the design and construction of offshore subsea oil and gas pipelines
R 51-31323949-58-2000: Guidelines for the Application of Steel Pipe in the Oil and Gas Industry
RD 12.13.027-85: Temporary unified technological schemes for equipping the tunneling of freestanding ventilation and air supply vertical shafts with mobile tunneling equipment
RD 12.13.029-85: The methodology for choosing the optimal schemes and means of drainage in the second period of the construction of mines
RD 12.13.056-86: Equipping of vertical shafts. Unified technical solutions. Album I. Technological schemes
RD 12.13.056-86: Equipping of vertical shafts. Unified technical solutions. Album II. Equipment, buildings and structures
RD 153-006-02: Guidelines for the Welding Process in Construction and Renovation of Trunk Petroleum Pipelines
RD 153-34.1-11.354-2001: Recommended Practice for Design and Use of Special Orifice Devices for Measurement of Fuel Oil Consumption at Thermal Power Stations
RD 153-34.1-30.106-00: Rules for technical operation of gas-handling facilities for gas-turbine and combined-cycle units at thermal power plants
RD 22-16-2005*: Guiding regulatory material. Hoisting machines. Selection of materials for the manufacture, repair and reconstruction of welded steel structures
RD 24.203.03-90: Radii and angles of gib pipes
RD 26-18-7-88: Frame blocks. Calculation Methods
RD 34.10.306-88: Material allowances for repairs. Stationary steam boilers.
RD 34.26.603: Guide to Use of Scaffolding and Cradles for Steam Boiler Repair
RD 34.27.108: Guidelines for Design and Operation Shot Cleaning Units for Energy System Boilers
RD 34.37.407: Procedural Guidelines for Pre-Startup Steam-Oxygen Cleaning and Passivation of Steam-Water Line of Thermal Energy Equipment
RD 34.46.605: Transformers at Voltage of 110-1150 kV, with Power of 80 MVxA and Above
RD 38.13.004-86: Operation and repairs of process pipelines operating under pressure up to 10.0 MPa (100 kgf/cm2)
RD 39-0147014-348-89: Guidelines for Corrosion Protection of Field Equipment Using Domestically Manufactured Inhibitors
RD 39-0147014-535-87: Instructions for welding at installation and repair of pipelines and critical metal structures in organizations and enterprises of the Ministry of oil and gas industry.
RD 39-0147103-328-86: Process Guidelines for Application of Polymer Protective Coatings on the Interior Surface of Field Water Pipes Used for Transport of a Medium Containing Sulfur (Up to 100 mg/liter)
RD 39-030-90: Technology of complex processing of oil emulsions by demulsifiers and corrosion inhibitors
RD 39-1-1261-85: Technological regulations on the use of demulsifiers in oil preparation processes
RD 39-132-94: Regulations for Operation, Inspection, Repair and Rejection of the Field Pipelines 1994
RD 39-3-221-79: Instructions for corrosion protection of oilfield equipment using inhibitors of types IA, ID
RD 39-9-254-79: Guidelines for the design of oilfield facilities using a waterflooding method with polymers
RD EO 0657-2006: Methods of assessing the technical condition and resource characteristics of systems and means of fire protection of nuclear power units
RD ROSEK-006-97: Hoisting machines. Metal structures. Ultrasonic thickness gauging. Key Points
Recommendations: Aspiration smoke-sensitive alarms VESDA. Part 1. Scope
RMD 12-21-2013 Sankt-Peterburg: Typical temporary means of fencing, arranging and decorating construction sites
RST RSFSR 516-88: Eaves metal. Technical conditions
RST RSFSR 655-81: Ice screws fishing. General technical conditions
RTM 108.020.126-80: Method of calculation and design of oil coolers for oil supply systems of turbine units
RTM 24-85: Information index of state, republican and industry standards, technical specifications for materials and products used in the design of furnaces and dryers
RU 34-1203-71: Guidelines for the design of dust and air ducts of boiler units
SA 03-005-07: Industrial pipelines of oil-refining, petrochemical and chemical industry. Requirements to configuration and operation
SN 412-70: Consumption rates of materials, pipes, sanitary ware and heating devices per 1 million rubles. estimated cost of construction and installation works. Light industry. Food industry. Meat and dairy industry. Fish industry
SN 416-70: Consumption rates of materials, pipes, sanitary wares and heating devices for 1 million rubles. estimated cost of construction and installation works. Oil industry. Oil refining industry. Chemical (petrochemical) industry. Gas industry. Transportation of
SN 421-71: Consumption rates of materials, pipes, sanitary ware and heating devices for 1 million rubles. estimated cost of construction and installation works. Non-ferrous metallurgy
SN 425-71: Consumption rates of materials, pipes, sanitary wares and heating devices per 1 million rubles. estimated cost of construction and installation works. Ferrous metallurgy
SN 425-78: Consumption rates of materials and products for 1 million rubles. estimated cost of construction and installation works
SNiP 2.04.12-86: Steel pipelines strength analysis
SNiP II-40-80: Metro
SNiP II-G.14-62: Technological steel pipelines with nominal pressure up to 100 kgf/cm2 inclusive. Design Standards
SNiP II-M.4-62: Underground mine workings of mining companies. Design Standards
SO 34.03.355-2005: Methodological instructions for ensuring fire and explosion safety during operating power gas turbine electric power units.
SP 10.13130.2020: Fire protection systems. Internal fire-fighting water supply. Norms and rules of design
SP 109-34-97: SPSMG. The construction of crossings under roads and railways
SP 120.13330.2012: Subway systems
SP 24.13330.2011: Pile foundations
SP 241.1311500.2015: Fire protection systems. Automatic water extinguishing systems for high rack storages. Designing and regulations rules
SP 249.1325800.2016: Design and construction of underground utilities by closed and cut-and-cover methods
SP 25.13330.2012: Soil bases and foundations on permafrost soils
SP 25.13330.2020: Bases and foundations on permafrost soil SNiP 2.02.04-88
SP 32-105-2004: Subways
SP 402.1325800.2018: Residential buildings. Rules for the design of gas consumption systems
SP 41-101-95: Designing heat supply stations (to the SNiP 2.04.07-86)
SP 41-104-2000: Design of independent heat supply sources
SP 42-102-2004: Design and construction of gas pipelines from metal pipes. To replace SP 42-102-96
SP 42-102-96: Code of practice for the use of steel pipes for the construction of gas supply systems
SP 485.1311500.2020: Fire protection systems. Automatic fire extinguishing installations. Norms and rules of design
SP 5.13130.2009: Fire protection systems. Automated fire alarm and fire extinguishing installations. Design norms and regulations
SP 510.1325800.2022: Heating units and internal heating systems
SP 63.13330.2012: Concrete and reinforced concrete structures. General provisions.
SP 63.13330.2018: Concrete and reinforced concrete structures. Key Points
ST RK 2823-2016: Industrial explosives Poremit-1. Technical conditions
ST TsKBA 070-2009: Pipe fittings. Symbol of materials in the design documentation
TU 102-360-85: Aluminum aluminum masts for radio relay communication type MAP
TU 1317-006.1-593377520-2003: Steel seamless oil and gas pipelines of increased operational reliability for the field construction of TNK OJSC
TU 1317-233-0147016-02: Seamless hot-deformed oil and gas pipes of increased reliability during operation for the fields of OAO Tomskneft VNK
TU 1390-002-86695843-08: Steel pipes and parts of pipes with internal anti-corrosion coating based on highly viscous materials
TU 1390-014-86695843-2011: Steel pipes and parts of pipelines with external two-layer epoxy anticorrosion coating
TU 1390-015-86695843-2011: Steel pipes with Stelrant external anticorrosion polyurethane coating
TU 1394-006-86695843-10: Steel pipes with epoxy protective coating
TU 1394-011-86695843-2011: Steel pipes with an external two-layer epoxy coating resistant to ultraviolet radiation. Technical conditions
TU 14-158-101-97: Seamless hot-deformed oil and gas pipes of increased cold resistance and corrosion resistance for OJSC "Surgutneftegas" fields
TU 14-159-1128-2008: Steel and seamless hot-deformed cold-resistant pipes for gas pipelines of gas-lift systems and arrangement of gas fields
TU 14-161-184-2000: Steel seamless tubes of steel grade 09G2S
TU 14-162-14-96: Seamless hot-deformed oil and gas pipes of increased corrosion resistance and cold resistance. Technical conditions
TU 14-3-1128-2000: Seamless hot-deformed steel pipes for gas pipelines of gas-lift systems and gas field equipment. Technical conditions
TU 14-3-1128-82: Seamless hot-deformed steel pipes for gas pipelines of gas-lift systems and gas field equipment. Technical conditions
TU 14-3-1430-87: Pipes, Seamless and Welded, Second-Grade
TU 14-3-1760-91: Seamless Steel Pipes, Hot Deformed, Higher Precision
TU 14-3-190-2004: Seamless steel pipes for boiler plants and pipelines
TU 14-3-190-82: Seamless steel pipes for boiler plants and pipelines
TU 14-3-1972-97: Seamless hot-deformed oil and gas pipes of increased corrosion resistance and cold resistance. Technical conditions
TU 14-3-523-76: Steel pipes lined with high density polyethylene. Technical conditions
TU 14-3-587-77: Seamless hot-rolled pipes of steel grade 20 for the refining industry
TU 14-3-963-80: Steel bends lined with high precision polyethylene. Technical conditions
TU 14-3R-1128-2007: Seamless cold-resistant steel pipes for gas pipelines of gas-lift systems for oil production and gas field equipment. Technical conditions
TU 14-3R-44-2001: Seamless hot-deformed steel pipes for oil and gas pipelines. Technical conditions
TU 14-3R-51-2001: Seamless steel pipes, hot-rolled, thick-walled for mechanical engineering
TU 14-3R-54-2001: Seamless hot deformed pipes made of steel grade 20YUCH. Technical conditions
TU 14-3R-63-2002: Steel pipes lined with polyethylene pipes. Technical specifications
TU 26-01-949-85: The devices gummed with the mechanical mixing device of volume 1; 2; 3.2; 6.3; 10 and 16 m3
TU 26-05-108-88: Acetylene mobile generators of continuous action with a capacity of up to 3 m3
TU 26-05-39-85: Ramp acetylene discharge with protective device PAP-15
TU 3-120-81: Expansion Bellows, Axial , Loaded. Technical Specifications
TU 36-1686-82: Bends are steeply curved with an angle of 90 degrees from steel grades 15X5M, 08X18NIOT, 12X18NIOT and 10X17H13M2T seamless welded on the Rou is less than 10 MPa
TU 3631-002-76457067-2012: Dynamic Pumps and Pump Units MST-TsN type and spare parts for them
TU 3680-001-04698606-04: Pipe Support
TU 5216-002-03910056-2008: Barrier metal fencing. Technical conditions
TU 5764-011-01297858-99: Steel pipes with thermal insulation from polyurethane foam. Technical conditions
TU 5768-009-86695843-2011: Steel pipes with thermal insulation made of polyurethane foam in a protective sheath for oil and gas pipelines
U-ST 01-87: Guidelines for the design of open pumping refineries and petrochemical plants
VNTP 13-2-85: Standards for technological design of mining enterprises of metallurgy with underground mining method
VNTP 1-86: Norms of technological design of coal and slate mines
VNTP 21-92: Standards for technological design of enterprises of the confectionery industry
VNTP 29-83: Norms of technological design of concentrating factories. Section "Chutes and pipelines"
VNTP 36-84: Norms of technological design of coal and shale mines. Section "Pipelines laid in underground workings"
VNTP 3-85: Norms of process design of facilities for gathering transport and treatment of oil gas and water of oil fields
VNTP 3-92: Temporary norms of technological designation of processing plants
VSN 132-92: Execution and Acceptance Requirements for Injection Grouting Behind Tunnel Liner
VSN 136-78/Mintransstroj: Instructions for the design of auxiliary structures and devices for the construction of bridges
VSN 1-84: T-Joints and T-Type Connections, Welded, for Nominal Pressure of 5.5 and 7.5 MPa (55 and 75 kgf/sq. cm)
VSN 189-78: Guidelines for Planning and Execution of Artificial Soil Freezing Used in Subway and Tunnel Construction
VSN 25-95: Guidelines for the Application of Polyethylene Foam Jackets for Pipe Insulation
VSN 279-85: Guidelines for Sealing Joints in Ventilating and Plumbing Systems
VSN 309-84: Design and Construction of Cast-in-Place Piles Using Vibration Methods
VSN 362-87: Disinfections and Etching of Pipelines
VSN 36-86: Installation of Lining in Underground Hydraulic Structures Constructed in Rocky Permafrost Soils
VSN 415-81: General Specified Quantity Allowances for Building Materials. Compendium 19: Installation of Domestic Heating, Water Supply, Drainage, and Gas Supply Systems
VSN 467-85: General Specified Quantity Allowances for Building Materials. Compendium 7: Installation of Metal Structures for Tanks and Gasholders
VSN 488-86: Joint Grouting Procedures for Precast Structural Elements of Underground Structures
VSN 51-3-85: Design of field steel pipelines
Customers Who Viewed This Item Also Viewed:
Special railway rolling stok. Dynamic and strength testing procedures
Blanks for marine shafts and rudder stocks. Specifications
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.