PR 108-2010

ПР 108-2010

Regulations on standards of units used in the state regulation of ensuring the uniformity of measurements

Положение об эталонах единиц величин, используемых в сфере государственного регулирования обеспечения единства измерений

Status: Effective

The document defines the procedure for establishing mandatory requirements for standards of units used to ensure uniformity of measurements in the field of state regulation of ensuring the unity of measurements, including the state primary standard of units of quantities and other standards of units of quantities, including standard samples used as standards of units of measurement , and the application of these requirements, the procedure for assessing the conformity of standards of units with state standards of units of quantities, as well as procedure for approval, content, comparison and application of national primary standards of measurement units.

Документ определяет порядок установления обязательных требований к эталонам единиц величин, используемых для обеспечения единства измерений в сфере государственного регулирования обеспечения единства измерений, в том числе государственным первичным эталоном единиц величин и иным эталонам единиц величин, включая применяемые в качестве эталонов единиц величин стандартные образцы и средства измерений, и применения этих требований, порядок оценки соответствия эталонов единиц величин от государственных эталонов единиц величин, а также порядок утверждения, содержания, сличения и применения государственных первичных эталонов единиц величин.

Choose Language: 
Format: Electronic (pdf/doc)

Approved: Government of the Russian Federation, 9/23/2010

SKU: RUSS162735


Price: request_a_quote

The Product is Contained in the Following Classifiers:

PromExpert » SECTION I. TECHNICAL REGULATION » IV Conformity assessment of products and services » 1 Key points infield of conformity assessment »

ISO classifier » 17 METROLOGY AND MEASUREMENTS. PHYSICAL PHENOMENA » 17.020 Metrology and measurements in general »


The Document References:

Federal Law 184-FZ: About technical regulation

Resolution 1355: On amendments to the Regulation on measurement standards of units of quantities used in the field of state regulation of ensuring the uniformity of measurements

The Document is Referenced By:

GOST R 8.784-2012: State system for ensuring the uniformity of measurements. Measuring installations - standards of 2-nd class of moisture content of firm and loose materials. Verification procedure

GOST R 8.809-2012: State system for ensuring the uniformity of measurement standards primary state. Creation, statement, contents and using

GOST R 8.810-2012: State system for ensuring the uniformity of measurements. Reference materials. The programme and procedure for the determination of metrological characteristics

GOST R 8.885-2015: State system for ensuring the uniformity of measurements. Measurement standards. Basic principles

GOST R 8.890-2015: State system for ensuring the traceability of measurements. Optoelectronic instruments as a part of space-based informational and measuring systems for Earth Observation. Organizational and methodical provisions for ensuring the uniformity of radiometric measurements

GOST R 8.920-2016: State system for ensuring the uniformity of measurements. Certified reference materials of gas mixtures with Nitrogen oxide, Nitrogen dioxide, Hydrogen sulfide, Sulfur dioxide, Ammonia. Procedure of determining the metrological characteristics

GOST R 8.925-2016: State system for ensuring the uniformity of measurements. Certified reference materials of gas mixtures with Hydrogen, Nitrogen, Oxygen, Carbon Oxide, Carbon Dioxide, Methane, Propane, Hexane. Procedure of determining the metrological characteristics

GOST R 8.926-2016: State system for ensuring the uniformity of measurements. Certified reference materials of gas mixtures with halocarbons. Procedure of determining the metrological characteristics

R 50.2.082-2012: State system for ensuring the uniformity of measurements. Training materials for certification and approval of the State working standards in the realm of State Regulation of Providing traceability

GOST R 58926-2020: The system for ensuring the uniformity of measurements at the enterprises of the aviation industry. Basic Provisions

GOST R 58929-2020: A system for ensuring the uniformity of measurements at enterprises of the aviation industry. Metrological support of aircraft products

GOST R 8.976-2019: State system for ensuring the uniformity of measurements. Standard samples of the composition of calibration gas mixtures. General specifications

Order 1/12-NPA: On approval of the Regulations on the procedure for attestation of measurement standards of units of quantities in the field of atomic energy use (invalidated from 05/11/2021 on the basis of the order of the State Atomic Energy Corporation Rosatom No. 1/17-NPA dated 21.12.2020)

Order 1436: On approval of the State verification scheme for measuring instruments of electrical energy quantities in the frequency range from 1 to 2500 Hz

Order 1794: About the approval of the state verification scheme for measuring instruments of torque

Order 1815: The procedure for verification of measuring instruments, requirements for the verification mark and the content of the verification certificate

Order 1942: On approval of the State verification scheme for measuring instruments of alternating electric voltage up to 1000 V in the frequency range from 1 10 to 2 10 Hz

Order 2315: On approval of the State verification scheme for measuring instruments for the content of components in gas and gas condensate environments

Order 2376: About the approval of the state verification scheme for means of measuring chromatic dispersion in an optical fiber

Order 2498: On the approval of the state verification scheme for force measuring instruments

Order 2499: On the approval of the state verification scheme for measuring instruments for absorbed dose, absorbed dose rate of beta radiation in tissue equivalent material, directed and individual beta dose equivalents and their capacities

Order 2500: About the approval of the state verification scheme for measuring instruments of optical power of spectacle optics

Order 2815: On the approval of the state verification scheme for measuring instruments for air velocity

Order 2819: On the approval of the state verification scheme for measuring instruments for deviations from flatness of optical surfaces

Order 2827: On approval of the state verification scheme for measuring activity and volume activity of beta-active gases (FSUE "VNIIFTRI")

Order 2828: On approval of the State verification scheme for measuring instruments of combustion energy, specific combustion energy and volumetric combustion energy

Order 2831: About the approval of the state calibration scheme for coordinate-time measuring instruments

Order 2840: On the approval of the state verification scheme for measuring instruments for length in the range from 1x10 (-9) to 100 m and wavelengths in the range from 0.2 to 50 microns

Order 2841: On the approval of the state verification scheme for measuring activity, specific activity of radionuclides, flux and flux density of alpha, beta particles and photons of radionuclide sources

Order 2842: On the approval of the state verification scheme for measuring instruments for the propagation velocity and attenuation coefficient of ultrasonic waves in solid media

Order 3276: On the approval of the state verification scheme for measuring instruments for coating thickness in the range of values ​​from 1 to 120,000 microns

Order 3452: On approval of the State verification scheme for measuring instruments for ethanol content in gaseous media

Order 3456: About the approval of the state calibration scheme for measuring instruments for electrical resistance of direct and alternating current

Order 3457: On approval of the State verification scheme for measuring instruments of direct electric voltage and electromotive force

Order 3458: About the approval of the state verification scheme for measuring instruments of direct current voltage

Order 3460: On the approval of the state verification scheme for measuring instruments for continuous and pulsed radiation

Order 3461: On the approval of the state verification scheme for measuring instruments for the power of electromagnetic waves in the frequency range from 9 kHz to 37.5 GHz

Order 3467: About the approval of the state verification scheme for measuring instruments of complex dielectric constant in the frequency range from 10 Hz to 10 MHz

Order 3469: On approval of the state verification scheme for measuring instruments for magnetic field strength in the frequency range from 0.000005 to 1000 MHz

Order 925: On approval of the State verification scheme for measuring instruments for specific heat capacity and specific enthalpy of solids in the temperature range from 260 to 870 K

Order 926: On approval of the State verification scheme for measuring instruments of electrical capacity in the frequency range from 1 to 300 MHz

Order 988: On approval of the State verification scheme for measuring instruments for the content of organic and organoelement components in liquid and solid substances and materials

Resolution 1355: On amendments to the Regulation on measurement standards of units of quantities used in the field of state regulation of ensuring the uniformity of measurements

Customers Who Viewed This Item Also Viewed:

Electromagnetic compatibility of technical equipment. Immunity of equipment for general lighting purposes to electromagnetic disturbance. Requirements and test methods
Language: English
Price: $218.25
Еlectromagnetic compatibility of technical equipment. Harmonic current emissions (equipment input current <= 16 A per phase). Limits and test methods
Language: English
Price: $410.31
Limits and methods of measurement of radio disturbance characteristics of electrical lighting and similar equipment
Language: English
Price: $714.89
Pipeline valves. General safety requirements
Language: English
Price: $213.84
Еlectromagnetic compatibility of technical equipment. Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems. Equipment with rated current <= 16 A and not subject to conditional connection. Limits and test methods
Language: English
Price: $359.87
Obosnovanie bezopasnosti oborudovaniya. Rekomendatsii po podgotovke
Language: English
Price: $67.32
Steel welded vessels and apparatus. General technical conditions
Language: English
Price: $108.90
Conformity assessment system for the use of nuclear energy. Personnel in the non-destructive and destructive testing of metal. Requirements and qualification procedure Дата введения в действие 15.03.2018
Language: English
Price: $207.90
State system for ensuring the uniformity of measurements. Verification of testing equipment. General principles
Language: English
Price: $121.77
Unified system of corrosion and ageing protection. Paint coatings. Groups of operation conditions
Language: English
Price: $158.40
Atom stations. Equipment, instruments, means of monitoring and control systems. General technical requirements
Language: English
Price: $1,146.54
System of design documents for construction. Basic requirements for design and working documentation
Language: English
Price: $867.18
Reinforcing rolled products for reinforced concrete constructions. Specifications
Language: English
Price: $298.98
Passenger cars on locomotive traction. Requirements for structural strength and dynamic qualities
Language: English
Price: $595.58
Non-destructive Testing. Welded Joints. Ultrasonic Methods
Language: English
Price: $140.58
Flanges for valves, fittings and pipelines for pressure to PN 250. Design, dimensions and general technical requirements
Language: English
Price: $293.04
Stainless steels and corrosion resisting, heat-resisting and creep resisting alloys. Grades
Language: English
Price: $212.85
Pipeline valves. Leakage rates of valves
Language: English
Price: $173.25
Compilation and execution of safety data sheet of chemical products
Language: English
Price: $175.23
Supports for Cylindrical and Conical Upright Apparatus. Types and Basic Parameters
Language: English
Price: $573.20

YOUR ORDERING MADE EASY!

RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.

Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.

We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.

Placing Your Order

Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).

Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.

For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.

For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.

Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.

Your Order Best Quality and Authenticity Guarantee

Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).

We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.

We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.

All Codes and Regulations

All Categories

Send us a message Expand Collapse

Leave your message in the form below, and we will write back by e-mail!