GOST 10052-75

ГОСТ 10052-75

Metal covered electrodes, for manual arc welding of high-alloyed steels with special properties. Types

Электроды покрытые металлические для ручной дуговой сварки высоколегированных сталей с особыми свойствами Типы

Status: Effective - Supersedes. The limitation of the effectiveness period has been lifted: Protocol No. 3-93 of the IGU dated 03.03.93 (IUS 5-6-1993)

The standard applies to metal coated electrodes for manual arc welding of corrosion-resistant, heat-resistant and heat-resistant high-alloy steels of martensitic, martensitic-ferritic, ferritic, austenitic-ferritic and austenitic classes.

Стандарт распространяется на металлические покрытые электроды для ручной дуговой сварки коррозионностойких, жаропрочных и жаростойких высоколегированных сталей мартенситного, мартенсито-ферритного, ферритного, аустенито-ферритного и аустенитного классов.

Choose Language: 
Format: Electronic (pdf/doc)
Page Count: 12

Approved: Gosstandart of the USSR, 3/27/1975

SKU: RUSS16276

Price: $67.32




The Product is Contained in the Following Classifiers:

Construction (Max) » Standards » Other state standards used in construction » 25 Mechanical Engineering »

Welding regulations » Welding work »

Welding regulations » Main materials »

Welding regulations » Welding materials »

Welding regulations » Non-destructive control »

Welding regulations » Heat treatment »

Welding regulations » Welding work » Manual welding »

Welding regulations » Main materials » Steel, cast iron »

Welding regulations » Main materials » Non-ferrous metals »

Welding regulations » Welding materials » Electrodes »

Welding regulations » Welding materials » Gases »

Standards for pipe fittings (TPA) » 10. Production » 10.3 Welding »

PromExpert » SECTION I. TECHNICAL REGULATION » V Testing and control » 4 Testing and control of products » 4.12 Testing and control of products of metallurgical industry » 4.12.6 Metal products »

ISO classifier » 25 MECHANICAL ENGINEERING » 25.160 Welding, brazing and hard soldering » 25.160.20 Welding consumables »

National standards » 25 MECHANICAL ENGINEERING » 25.160 Welding, brazing and hard soldering » 25.160.20 Welding consumables »

National Standards for KGS (State Standards Classification) » Latest edition » V Metals and metal products » V0 General rules and regulations on metallurgy » V05 Welding and cutting of metals. Soldering, riveting »

National Standards for OKSTU » METAL PRODUCTS FOR INDUSTRIAL PURPOSE (HARDWARE) » Metal electrodes for arc welding and surfacing (welding electrodes, except stainless) »


As a Replacement Of:

GOST 10052-62: Metal electrodes for arc welding of high-alloy steels with special properties. Types

The Document References:

GOST 6032-2003: Corrosion-resistant steels and alloys. Test methods of intercrystalline corrosion resistance

GOST 9466-75: Covered metal electrodes for manual arc welding of steels and deposition. Classification and general specifications

The Document is Referenced By:

GOST 14116-85: Vessels attaching rigs. Election lugs. Technical requirements

GOST 26155-84: Barrels from corrosion-resistant steel

GOST 30765-2001: Metal transport packagings. General specifications

GOST 31846-2012: Special Rolling Stock. Requirements for Bearing Structure Strength and for Dynamic Properties

GOST 31901-2013: Pipeline valves for nuclear stations. General specifications

GOST 32569-2013: Steel pipe technology. Requirements for design and operation of explosive and chemically dangerous production

GOST 33258-2015: Pipeline valves. Surfacing and quality control of surfaced surfaces. Technical requirements

GOST 33260-2015: Pipeline valves. Мetals used in pipeline valves production. Basic requirements for choice of materials

GOST 33857-2016: Pipe fittings. Welding and quality control of welded joints. Technical requirements

GOST 33976-2016: Welded joints in steel structures of railway rolling stock. Requirements for design, implementation and quality control

GOST 9466-75: Covered metal electrodes for manual arc welding of steels and deposition. Classification and general specifications

GOST R 51365-2009: Petroleum and natural gas industries. Drilling and production equipment. Wellhead and Christmas tree equipment. General specifications

GOST R 51365-99: Control head oil field equipment. General specifications

GOST R 53192-2008: Welded steel structures of freight cars. Technical requirements

GOST R 53192-2014: Welded joints in steel structures of railway rolling stock. Requirements for design, production and quality control

GOST R 53337-2009: Special rolling stock. Requirements for bearing structure stength and for dynamic properties

GOST R 54803-2011: High-pressure welded steel vessels. General technical requirements

GOST R 54892-2012: Installation of air separation plants and other cryogenic equipment. General provisions

GOST R 55509-2013: Pipeline valves. Metals used in pipeline valves production. Basic requirements for choice of materials

IM 4-12-95: Automation systems. Handbook of materials. Part 1. Basic materials

L8-508-524: Supports and suspensions of pipelines Dn less than 89 mm. Working drawings

OST 108.030.45-82: Tubular air heaters for stationary boilers. General Specifications.

OST 108.275.28-80: Double-yoke fixed supports for corrosion-resistant austenitic steel (grade АЭС) pipelines. Design and dimensions.

OST 108.275.57-80: Loop units for pipe hangers of nuclear thermal power plant. Design and dimensions.

OST 108.839.05-82: Block diaphragms for TPS pipelines. Construction and dimensions.

OST 108.839.08-82: Steam pipe unit nozzle for heat power station. Construction and dimensions.

OST 108.839.10-82: Steam pipe unit nozzle for heat power station. Construction and dimensions.

OST 24.050.34-84: Wagon steel structures design and production. Specifications.

OST 24.125.170-01: Details and prefabricated units of supports, hangers, ties for lens compensators and drives for remote control of pipe fittings in thermal and nuclear power plants. General Specifications.

OST 24.125.52-89: Units with diaphragms for pipelines of nuclear thermal power plant. Design and dimensions.

OST 24.200.02-91: Assembling units of steel pipelines on nominal pressure<=10 MPa (100 kgf/cm2) of complete technological lines. General specifications.

OST 24.201.03-90: Steel high-pressure vessels and devices. General technical requirements.

OST 24.940.01-90: Welded steel structures. General technical requirements.

OST 26.260.18-2004: Process modules for oil and gas industry. General technical specifications

OST 26.260.480-2003: Two-ply steel vessels and devices. Welding and weld deposition.

OST 26.260.758-2003: Metal structures. General technical requirements.

OST 26-01-1434-87: Welding of steel technological pipelines on nominal pressure over 10 to 100 MPa (over 100 to 1000 kgf/cm2). Technical requirements.

OST 26-01-151-82: Steel welded vessels and devices for low-temperature gas separations. Technical requirements, acceptance regulations and testing methods.

OST 26-04-1216-75: Cryogenic pipelines. Parts of disk supports. Design and dimensions.

OST 26-18-6-88: Vessels, Apparatus and Process Units, Operating at Temperature Below Minus 70°C. Technical requirements

OST 26-3-87: Welding in chemical mechanical engineering. Main provisions.

OST 34-42-816-85: Welding of pipelines from the pearlitic and austenitic steels on nuclear power plants. Main provisions.

OTU 3-01: Vessels and apparatuses. General specifications for the repair of buildings

PB 03-384-00: Rules for design, manufacture and acceptance of steel welded vessels and apparatus

PNAE G-10-031-92: Basic provisions for localizing safety system elements welding on nuclear stations

RD 059/01-2019: Instructions for welding and surfacing during the repair of freight cars (with Amendment No. 1)

RD 10-69-94: Typical technological process of installation electrical equipment. Main provisions.

RD 108.021.112-88: Correction of defects in the cast hull parts of steam turbines and valves by welding without heat treatment

RD 153-34.1-003-01: Welding, heat treatment and control of copper pipe systems and pipelines at power equipment installation and repair.

RD 26-02-80-2004: The leading document. Welded coils for pipe furnaces. Requirements to design, production and delivery.

RD 26-07-264-86: Anticorrosive weld deposit of sealing surfaces of pipeline fittings.

RD 26-17-049-85: Organization of storage, preparation and control of welding materials

RD 2730.300.06-98: Fixtures for nuclear plants and thermal stations. Cladding of sealing surfaces. Specifications

RD 31.52.21-88: Recommendations on selection of welding materials in enterprises of Ministry of Marine.

RD 31.52.23-89: Ship diesel engines. Restoring cylinder covers using welding. Typical Processes

RD 34.10.124-94: Instructions for the preparation and storage of welding materials

RD 34.15.027-93: Welding, Heat Treatment, and Testing of Boiler Tube Systems and Piping During Installation and Repair of Electric Supply Station Equipment (RTM-1s-93)

RD 34.17.310-96: Welding, Heat Treatment, and Inspection During In-Service Repair of Welded Joints in Boiler Tubing Systems and Steam Lines

RD 34.26.203: Guidelines for Brick Lining Work During Installation of Boiler Plants and Energy Facilities

RD 3689-001-00220302/31-2004: Radiant pipes and components for reaction pipe furnaces. Requirements for design, production and delivery.

RD 3689-002-00220302/31-2008: Welding of radiant tubes and their elements for reaction tube furnaces. Main provisions

RD 39-0147014-535-87: Instructions for welding at installation and repair of pipelines and critical metal structures in organizations and enterprises of the Ministry of oil and gas industry.

RD 39-132-94: Regulations for Operation, Inspection, Repair and Rejection of the Field Pipelines 1994

RTM 108.940.08-85: Welded structures of power equipment. General requirements for structural and process design

SA 03-005-07: Industrial pipelines of oil-refining, petrochemical and chemical industry. Requirements to configuration and operation

ST TsKBA 025-2006: Pipe fittings. Welding and quality control of welded joints. Technical requirements

ST TsKBA 053-2008: Pipe fittings. Surfacing and quality control of weld surfaces. Technical requirements

ST TsKBA 089-2010: Pipe fittings. Welding defects castings. Technical requirements

ST TsKBA 098-2011: Pipe fittings. Repair of surfacing. Technical requirements

TU 34-38-20189-94: Gas-oil burners for steam stationary boilers. Technical conditions for major repairs

TU 34-38-20190-94: Burner, types pulverized steam stationary boilers. Technical conditions for major repairs

TU 34-38-20191-94: Headset stationary boilers. General technical conditions for major repairs

TU 34-38-20365-94: Power valves. General technical conditions for major repairs

TU 4112-091-00220302-2005: Steel castings for equipment of oil refineries and petrochemical plants

Customers Who Viewed This Item Also Viewed:

Rules of Electrical Installations Design (Russian Electrical Code). 7th Edition. All sections and exhibits
Language: English
Price: $478.76
Foundation bolts. Structure and dimensions
Language: English
Price: $198.99
Pipeline valves. Leakage rates of valves
Language: English
Price: $173.25
Steel welded vessels and apparatus. General technical conditions
Language: English
Price: $108.90
Flanges for valves, fittings and pipelines for pressure to PN 250. Design, dimensions and general technical requirements
Language: English
Price: $293.04
Stainless steels and corrosion resisting, heat-resisting and creep resisting alloys. Grades
Language: English
Price: $212.85
State system for ensuring the uniformity of measurements. Verification of testing equipment. General principles
Language: English
Price: $121.77
Billet of rotor shafts and rings of turbine generators
Language: English
Price: $1,487.33
Steel building structures. General specifications
Language: English
Price: $250.17
Fencing constructions for translucent buildings and structures. Design rules
Language: English
Price: $609.15
Electromagnetic compatibility of multimedia equipment. Emission requirements
Language: English
Price: $974.64
Non-destructive testing. Method of magnetic particle testing. Standard technological processes
Language: English
Price: $292.05
Supports for Cylindrical and Conical Upright Apparatus. Types and Basic Parameters
Language: English
Price: $573.20
Steel structures
Language: English
Price: $297.00
Hot-rolled sheet. Range
Language: English
Price: $72.27
Obosnovanie bezopasnosti oborudovaniya. Rekomendatsii po podgotovke
Language: English
Price: $67.32
Reinforcing rolled products for reinforced concrete constructions. Specifications
Language: English
Price: $298.98
Tests on electric and optical cables under fire conditions. Part 3-22. Flame spread of vertically-mounted bunched wires or cables. Category A
Language: English
Price: $102.96
Unified system for design documentation. Exploitative documents
Language: English
Price: $150.48
Hexagon head bolts. Product grades A and B
Language: English
Price: $203.94

YOUR ORDERING MADE EASY!

RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.

Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.

We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.

Placing Your Order

Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).

Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.

For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.

For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.

Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.

Your Order Best Quality and Authenticity Guarantee

Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).

We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.

We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.

All Codes and Regulations

All Categories

Send us a message Expand Collapse

Leave your message in the form below, and we will write back by e-mail!