Cold-formed and heat-formed seamless steel pipes. Technical requirements
Трубы стальные бесшовные холоднодеформированные и теплодеформированные. Технические требования
Status: Effective - Supersedes. The limitation of effectiveness has been lifted: Protocol No. 6-94 of the IGU (IUS 3-1996)
The standard applies to cold deformed general purpose pipes made of carbon and alloy steel.
Стандарт распространяется на холоднодеформированные бесшовные трубы общего назначения из углеродистой и легированной стали.
Format: Electronic (pdf/doc)
Page Count: 12
Approved: State Committee of Standards of the Council of Ministers of the USSR,
The Product is Contained in the Following Classifiers:
Construction (Max) »
Other state standards used in construction »
23 Hydraulic and pneumatic systems and components for general use. »
Standards for pipe fittings (TPA) »
10. Production »
10.2 Billets (forgings, stampings, rolling, castings, etc.) »
ISO classifier »
23 HYDRAULIC AND PNEUMATIC SYSTEMS AND GENERAL PURPOSE COMPONENTS »
23.040 Pipelines and their components »
23.040.10 Cast iron and steel pipes »
National standards »
23 HYDRAULIC AND PNEUMATIC SYSTEMS AND GENERAL PURPOSE COMPONENTS »
23.040 Pipelines and their components »
23.040.10 Cast iron and steel pipes »
National Standards for KGS (State Standards Classification) »
Latest edition »
V Metals and metal products »
V6 Pipes metal and pipe products »
V62 Steel pipes and their connecting parts »
The Document is Replaced With:
GOST 8733-87: Steel seamless cold-deformed and heat-deformed pipes. Technical specifications
As a Replacement Of:
GOST 8733-66: Seamless steel pipes, cold drawn, heat-stretched, cold-rolled and heat-rolled. General technical requirements
The Document References:
GOST 10006-80: Metal pipes
GOST 1050-88: Carbon structural quality steel gauged bars with special surface finish. General specifications
GOST 10692-80: Steel and cast iron pipes and fittings. Rules for acceptance of marking, packing, transportation and storage
GOST 12344-2003: Alloyed and high-alloyed steels. Methods for determination of carbon
GOST 12345-2001: Alloyed and high-alloyed steels. Methods of sulphur determination
GOST 12347-77: Alloyed and high-alloyed steels. Methods for determination of phosphorus
GOST 12348-78: Alloyed and high-alloyed steels. Methods of manganese determination
GOST 12349-83: Alloyed and high-alloyed steels. Methods for determination of tungsten
GOST 12350-78: Alloyed and high-alloyed steels. Methods of chromium determination
GOST 12351-81: Steels alloyed and highalloyed. Methods for the determination of vanadium
GOST 12352-81: Steels alloyed and highalloyed. Methods for the determination of nickel
GOST 12353-78: Alloyed and high-alloyed steels. Methods of cobalt determination
GOST 12354-81: Steels alloyed and highalloyed. Methods for the determination of molybdenum
GOST 12355-78: Alloyed and high-alloyed steels. Methods of copper determination
GOST 12356-81: Steels alloyed and highalloyed. Methods of the determination of titanium
GOST 12357-84: Steels alloyed and highalloyed. Methods for the, determination of aluminium
GOST 12358-2002: Alloyed and highalloyed steels. Methods for determination of arsenic
GOST 12359-99: Carbon, alloyed and high-alloyed steels. Methods for determination of nitrogen
GOST 12360-82: Steels alloyed and highalloyed. Methods for the determination of boron
GOST 12361-2002: Alloyed and highalloyed steels. Methods for determination of niobium
GOST 12362-79: Alloy and high-alloy steels. Methods for determination of stibium, lead, tin, zinc and cadmium
GOST 12363-79: Steels alloyed and highalloyed. Methods for the determination of selenium
GOST 12364-84: Steels alloyed and highalloyed. Methods for the determination of cetium
GOST 12365-84: Steels alloyed and highalloyed. Methods for the determination of zirconium
GOST 14959-79: Spring carbon and alloy steel bars. Specifications
GOST 18360-93: Plate snap-gauges for diameters from 3 to 260 mm. Dimensions
GOST 18365-93: Plate snap-gauges with changeable lips for diameters over 100 to 360 mm. Dimensions
GOST 19281-89: Rolled steel with increased strength. General specifications
GOST 22536.0-87: Carbon steel and unalloyed cast iron. General requirements for methods of analysis
GOST 22536.1-88: Carbon steel and unalloyed cast iron. Methods for determination of general carbon and graphite
GOST 22536.2-87: Carbon steel and unalloyed cast iron. Methods for the determination of sulfur
GOST 22536.3-88: Carbon steel and unalloyed cast iron. Methods for determination of phosphorus
GOST 22536.4-88: Carbon steel and unalloyed cast iron. Methods for determination of silicon
GOST 22536.5-87: Carbon steel and unalloyed cast iron. Methods for determination of manganese
GOST 22536.6-88: Carbon steel and unalloyed cast iron. Methods for determination of arsenic
GOST 28473-90: Iron, steel, ferroalloys, metal chromium and metal manganese. General requirements for methods of analysis
GOST 3728-78: Tubes. Method of bend-over test
GOST 3845-75: Metallic tubes. Hydraulic pressure testing method
GOST 4543-71: Structural alloyed steel
GOST 6507-90: Micrometers. Specifications
GOST 7502-98: Measuring metal tapes. Specifications
GOST 7565-81: Iron, steel and alloys. Sampling for determination of chemical composition
GOST 8026-92: Levelling rules. Specifications
GOST 8693-80: Metal pipes. Method of flange testing
GOST 8694-75: Tubing (pipes). Expansion testing method
GOST 8695-75: Tubing (pipes). Flattening testing method
GOST 8734-75: Seamless steel tubes cold deformed. Range
GOST 9012-59: Metals. Method of Brinell hardness measurement
GOST 9567-75: Precision steel tubes. Range
GOST 12346-78: Alloyed and high-alloyed steels. Methods of silicon determination
The Document is Referenced By:
ATK 24.218.06-90: Couplings for Welded Steel Vessels and Apparatus. Types, Basic Parameters, Dimensions, and General Technical Requirements
ATK 26-01-1-89: Pipeline viewing lights. Types and designs
GOST 10617-83: Heating boilers with heat output heating capacity from 0.10 to 3.15 mw
GOST 10674-82: Tank cars of 1520 mm gauge main-line railways. General specifications
GOST 10674-97: Tank Car of 1520 mm gauge mainline railways. General technical conditions
GOST 12.2.052-81: Occupational safety standards system. Equipment working with gaseous oxygen. General safety requirements
GOST 12644-80: Hollow and semi-hollow rivets. Specifications
GOST 14245-79: Heat exchangers shell-and-tube with U-shaped tubes. Basic parameters and dimensions
GOST 15119-79: Shell-and-tube evaporators with fixed tube grids and shell-and-tube with a temperature compensator on the casing. Basic parameters and dimensions
GOST 15120-79: Shell-and-tube chillers with fixed tube grids and shell-and-tube with a temperature compensator on the casing. Basic parameters and dimensions
GOST 15121-79: Shell-and-tube condensers with fixed tube grids and shell-and-tube with a temperature compensator on the casing. Basic parameters and dimensions
GOST 16078-70: Tube connections on internal cone. Technical requirements
GOST 17380-2001: Carbon and low-alloy steel butt-welding fittings. General specifications
GOST 17380-83: Seamless welded steel pipeline components for Pn £ 10 MPa (£ 100 kgf/cm2). Specifications
GOST 17679-80: Light yokes for pipe-line and cable fixing. Design and dimensions
GOST 19029-73: Closing up of ropes to thimble. Construction and dimensions
GOST 19277-73: Seamless steel tubes for oil and fuel lines. Specifications
GOST 22486-77: Evaporators shell-and-tube of steel for refrigeration. Type, basic parameters and dimensions
GOST 23762-79: Shell-and-tube heat exchangers for high temperatures and pressures. Basic parameters and dimensions
GOST 24638-85: Annular diamond drills for reinforced concrete constructions
GOST 24788-2001: Enameled steel kitchen utensils. General specifications
GOST 24950-81: Bent branches and curved inserts for the turns of the linear parts of steel long distance pipe lines
GOST 2918-79: Liquid sulphur dioxide technical. Specifications
GOST 3050-77: Hose joints for flexible hoses
GOST 30732-2001: Steel shaped pipes and products with foamed polyurethane thermal insulation in polyethylene jacket. Technical specifications
GOST 30872-2002: Air cooling machines. General specifications
GOST 32216-2013: Special railway rolling stock. General technical requirements
GOST 32569-2013: Steel pipe technology. Requirements for design and operation of explosive and chemically dangerous production
GOST 33260-2015: Pipeline valves. Мetals used in pipeline valves production. Basic requirements for choice of materials
GOST 34347-2017: Steel welded vessels and apparatus. General technical conditions
GOST 5890-78: Pipe connection with screwed ends. Specifications
GOST 5973-2009: Dump cars for 1520 mm railway gauge. General specifications
GOST 5984-80: Explosives. Methods for determination of brisance
GOST 6856-54: Steel tubes
GOST 8734-75: Seamless steel tubes cold deformed. Range
GOST 9567-75: Precision steel tubes. Range
GOST R 51364-99: Air cooling apparatus. General specifications
GOST R 51659-2000: Tank cars of 1520 mm gauge main line railways. General specifications
GOST R 52630-2006: Steel welded vessels and apparatus. General specifications
GOST R 52630-2012: Steel welded vessels and apparatus. General specifications.
GOST R 53682-2009: Fired heaters for refineries. General technical requirements
GOST R 53978-2010: Special railway rolling stock. General technical requirements
GOST R 54159-2010: Seamless and welded cold deformed steel pipes for general purposes. Specifications
GOST R 54803-2011: High-pressure welded steel vessels. General technical requirements
GOST R 55474-2013: Gas distribution systems. Requirements for gas distribution networks. Part 2. Steel gas pipelines
GOST R 55509-2013: Pipeline valves. Metals used in pipeline valves production. Basic requirements for choice of materials
GOST R 55601-2013: Heat exchanger apparatuses and air cooling apparatuses. Tube expanding in tube-sheets. General technical requirements
GOST R 55682.2-2017: Water-tube boilers and auxiliary installations. Part 2. Materials for pressure parts of boilers and accessories
GOST R 58095.1-2018: Gas distribution systems. Requirements for gas consumption networks. Part 1. Steel gas pipelines
IM 4-12-95: Automation systems. Handbook of materials. Part 1. Basic materials
Manual to SN 527-80: Manual to SN 527-80. On the strength design of the technological steel pipelines at Py up to 10 Mpa
Manual: Manual for impulse and low consumption fire extinguishing systems
MDS 40-2.2000: Design Manual for Self-Contained Utility Systems (Water Supply, Sewerage, Piped Heat Supply and Ventilation, Gas Supply, and Electricity Supply Systems) for Single-Dwelling and Multiple-Dwelling Residential Occupancies
MI 1069-85: State system for ensuring uniformity of measurements. Methodical instructions. Machine-oriented data recording system for metals (alloys)
OST 24.200.02-91: Assembling units of steel pipelines on nominal pressure<=10 MPa (100 kgf/cm2) of complete technological lines. General specifications.
OST 24.201.03-90: Steel high-pressure vessels and devices. General technical requirements.
OST 26.260.01-2001: Steel enamel vessels and devices. General technical specifications.
OST 26.260.18-2004: Process modules for oil and gas industry. General technical specifications
OST 26.260.758-2003: Metal structures. General technical requirements.
OST 26-01-1159-75: Pipe input-outputs of steel welded containers and devices. Technical requirements.
OST 26-01-151-82: Steel welded vessels and devices for low-temperature gas separations. Technical requirements, acceptance regulations and testing methods.
OST 26-01-342-71: Parts of pipelines. Viewing portholes with flat glass. Design and dimensions
OST 26-02-2060-79: Underground horizontal drainage tanks. Specifications
OST 26-02-376-78: Technological units of gas and oil industry. General technical requirements.
OST 26-02-535-78: Piston oil pumps with electric drive and regulated supply
OST 26-04-1334-75: Straight welded carbon steel elbows. Design and dimensions.
OST 26-04-1336-75: welded straight carbon steel tees. Design and dimensions.
OST 26-07-2027-80: Symbols of materials in the design documentation.
OST 26-291-94: Steel welded vessels and devices. General technical requirements.
OST 34-10-569-93: Axial single-lens compensator for Pnom ≤1.6 MPa (16 kg/cm2). Design and dimensions.
OST 34-10-747-97: Parts and assembly units of pipelines of TPPs at Rrab <2.2 MPa (22 kgf
OST 34-42-747-85: Details and prefabricated units of TPS pipelines, working P<2.2 MPa (22 kg/cm2), t ≤545 °C. Pipes and rolling. Pipe grades.
OST 34-42-816-85: Welding of pipelines from the pearlitic and austenitic steels on nuclear power plants. Main provisions.
OST 36-145-88: Steel technological pipelines for pressure Ру up to 10 MPa. Fluxing automatic arc welding. Typical technological process.
OST 36-41-81: Welded and bent details pipelines made of carbon steel with Dy up to 500 mm, for Py up to 10 MPa (100 kg/cm2). Types and basic parameters.
PB 03-108-96: Process pipeline design and safe operation rules
PB 03-384-00: Rules for design, manufacture and acceptance of steel welded vessels and apparatus
PB 03-576-03: Regulations of design and safe operation of pressure vessels
PB 03-75-94: Rules for arrangement and safe operation of steam and hot water piping
PB 10-115-96: Regulations of design and safe operation of pressure vessels
PB 10-573-03: Series 17. Supervision documents in power industry. Issue 46. Construction and safe operation of steam and hot water pipelines rules.
PB 10-574-03: Safety Operation and Design Codes for Steam and Hot Water Boilers
PB 10-575-03: Requirements for the Design and Safe Operation of Electric Boilers and Electric Boiler Plants
PB 11-401-01: Safety regulations for gas-handling facilities of metallurgic and coke-chemical industries and enterprises
PNST 320-2018: Bearing structures of railway signaling devices. General technical requirements
R 51-31323949-58-2000: Guidelines for the Application of Steel Pipe in the Oil and Gas Industry
RD 10-69-94: Typical technological process of installation electrical equipment. Main provisions.
RD 153-006-02: Guidelines for the Welding Process in Construction and Renovation of Trunk Petroleum Pipelines
RD 153-34.1-003-01: Welding, heat treatment and control of copper pipe systems and pipelines at power equipment installation and repair.
RD 153-34.1-30.106-00: Rules for technical operation of gas-handling facilities for gas-turbine and combined-cycle units at thermal power plants
RD 26-02-80-2004: The leading document. Welded coils for pipe furnaces. Requirements to design, production and delivery.
RD 34.10.306-88: Material allowances for repairs. Stationary steam boilers.
RD 34.30.106-95: Guidelines for the design of gas supply system with the addition of natural gas up to 0.5 MPa for gas turbine and combined cycle thermal power plants of RAO "UES of Russia", 08/24/95
RD 34.39.201: Guidelines for Installation of Steam and Water Piping Systems in Thermal Power Stations
RD 34.44.102-97: Guidance on the design of farms for liquid fuel for gas turbine and combined cycle power plants of TPP RAO "UES of Russia", 08/25/97
RD 38.13.004-86: Operation and repairs of process pipelines operating under pressure up to 10.0 MPa (100 kgf/cm2)
RD 39-0147014-535-87: Instructions for welding at installation and repair of pipelines and critical metal structures in organizations and enterprises of the Ministry of oil and gas industry.
RD 39-0147103-338-88: Temporary standards for the design of electric heating above-ground main pipelines (Axial electric heating system of ASE)
RD 39-132-94: Regulations for Operation, Inspection, Repair and Rejection of the Field Pipelines 1994
RD 3-VEP: Guidance document on the use of axial bellows expansion joints (SC) for the technical conditions of the İNESH.300260.029TU, bellows compensating devices (SKU) for the technical conditions of the ЯІANSh.300260.033TU, starting bellows for the compensators (
RD 4-VEP: Guiding document on the use of axial bellows expansion joints (KSO-TPZ) for the technical specifications of TU 3-120-81 OAO Tula Cartridge Plant and starting bellows compensators (KSS-TPZ) for the technical specifications of TU 3695-056-08629358- 2000 OJS
RD 5-VEP: Guidance document on the use of axial bellows expansion joints of OJSC Metalomp in the design, construction and operation of heating networks according to technical specifications TU 5-99 NFCP.302667.310 TU (SK-160.000.00.TU) "Compensators bellows" SK-MK
RM 4-246-91: Automation systems. General requirements for CAD
RM 4-266-93: Embedded devices in pipelines and equipment for installation of instruments and automation equipment. Guide to the choice of means of strengthening holes
RMK 11-87: Temporary guidelines for the design of process piping heating systems with hot water, steam and steam condensate
SA 03-005-07: Industrial pipelines of oil-refining, petrochemical and chemical industry. Requirements to configuration and operation
SN 412-70: Consumption rates of materials, pipes, sanitary ware and heating devices per 1 million rubles. estimated cost of construction and installation works. Light industry. Food industry. Meat and dairy industry. Fish industry
SN 416-70: Consumption rates of materials, pipes, sanitary wares and heating devices for 1 million rubles. estimated cost of construction and installation works. Oil industry. Oil refining industry. Chemical (petrochemical) industry. Gas industry. Transportation of
SNiP 2.04.12-86: Steel pipelines strength analysis
SNiP 2.05.13-83: Petroleum Product Pipelines Constructed within Cities and Other Populated Areas
SNiP II-45-75: Main pipelines
SNiP II-G.14-62: Technological steel pipelines with nominal pressure up to 100 kgf/cm2 inclusive. Design Standards
SO 34.03.355-2005: Methodological instructions for ensuring fire and explosion safety during operating power gas turbine electric power units.
SP 373.1325800.2018: Independent heat supply sources. Design rules
SP 41-101-95: Designing heat supply stations (to the SNiP 2.04.07-86)
SP 41-104-2000: Design of independent heat supply sources
SP 42-102-2004: Design and construction of gas pipelines from metal pipes. To replace SP 42-102-96
ST TsKBA 005.1-2003: Pipe fittings. Metals used in the valve industry. Part 1. Basic requirements for the choice of materials
ST TsKBA 025-2006: Pipe fittings. Welding and quality control of welded joints. Technical requirements
ST TsKBA 070-2009: Pipe fittings. Symbol of materials in the design documentation
STB GOST R 51659-2001: Railroad tankers of mainline railways of 1520 mm gauge. General specifications
TSN 41-307-2003: Design and Construction of Piped Heat Distribution Networks with Individual Foam Polyurethane Thermal Insulation. City of Moscow
TU 1390-001-86695843-08: Steel pipes with a diameter of 57-1420 mm with an external two-layer and three-layer polyethylene coating
TU 14-3-1430-87: Pipes, Seamless and Welded, Second-Grade
TU 14-3-523-76: Steel pipes lined with high density polyethylene. Technical conditions
TU 26-02-1102-89: Shell and tube heat exchangers of increased thermal efficiency with an expander on the housing
TU 26-02-1105-89: Shell and tube heat exchangers with fixed tube sheets and shell and tube with a temperature compensator on the shell with a shell diameter of 159, 273, 325, 426 mm increased thermal efficiency. Technical conditions
TU 3113-028-00220302-01: Heaters of steam and water-to-water for heating networks of heating and hot water systems. Technical conditions
TU 34-38-20220-94: Smooth tube steam stationary boilers with natural circulation screens. Technical conditions for major repairs
TU 3612-014-00220302-99: Heat exchangers "pipe in pipe". Technical conditions
TU 3612-023-00220302-01: Shell-and-tube heat exchangers with a floating head, shell-and-tube with U-tubes and tube bundles for them
TU 3612-024-00220302-02: Shell and tube heat exchangers with fixed tube sheets and shell and tube with temperature compensator on the shell
TU 3644-006-00220302-99: Shell-and-tube heat exchangers for special purposes. Refrigeration evaporators and condensers
TU 5768-005-47114136-02: Steel pipes insulated with polyurethane foam in a polyethylene protective sheath for oil and gas pipelines
TU 5768-009-86695843-2011: Steel pipes with thermal insulation made of polyurethane foam in a protective sheath for oil and gas pipelines
VNTP 13-2-85: Standards for technological design of mining enterprises of metallurgy with underground mining method
VSN 10-83/Minhimprom: Instruction on designing of oxygen gas pipelines
VSN 191-79: Guidelines for Machine Oxygen Cutting of Rolled Carbon and Low-Alloy Steel for Bridge Structures
VSN 506-88: Design and construction of ground anchors
VSN 51-3-85: Design of field steel pipelines
GOST 34493-2018: Tractors and agricultural machinery powered by gas engine fuel. General technical requirements
Manual for SNiP II-37-76: Manual for the use of steel pipes for the construction of gas supply systems
OTU 3-01: Vessels and apparatuses. General specifications for the repair of buildings
PI 249-2000: Riveting of metal structures. application
RD 22-16-2005*: Guiding regulatory material. Hoisting machines. Selection of materials for the manufacture, repair and reconstruction of welded steel structures
RD 39-9-254-79: Guidelines for the design of oilfield facilities using a waterflooding method with polymers
Resolution: Rules for the design and safe operation of steam and hot water boilers
RTM 24-85: Information index of state, republican and industry standards, technical specifications for materials and products used in the design of furnaces and dryers
SP 341.1325800.2017: Underground engineering communications. Lining of by a method of the horizontal directional drilling
SP 402.1325800.2018: Residential buildings. Rules for the design of gas consumption systems
SP 409.1325800.2018: Pipelines trunk and field for oil and gas. Work on the installation of thermal and anticorrosive insulation, monitoring of work
SP 42-102-96: Code of practice for the use of steel pipes for the construction of gas supply systems
Customers Who Viewed This Item Also Viewed:
Electromagnetic compatibility of technical equipment. Immunity of equipment for general lighting purposes to electromagnetic disturbance. Requirements and test methods
Unified system for design documentation. Exploitative documents
Еlectromagnetic compatibility of technical equipment. Harmonic current emissions (equipment input current <= 16 A per phase). Limits and test methods
Limits and methods of measurement of radio disturbance characteristics of electrical lighting and similar equipment
Еlectromagnetic compatibility of technical equipment. Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems. Equipment with rated current <= 16 A and not subject to conditional connection. Limits and test methods
Pipeline valves. General safety requirements
Steel welded vessels and apparatus. General technical conditions
Conformity assessment system for the use of nuclear energy. Personnel in the non-destructive and destructive testing of metal. Requirements and qualification procedure Дата введения в действие 15.03.2018
State system for ensuring the uniformity of measurements. Verification of testing equipment. General principles
Unified system of corrosion and ageing protection. Paint coatings. Groups of operation conditions
Atom stations. Equipment, instruments, means of monitoring and control systems. General technical requirements
System of design documents for construction. Basic requirements for design and working documentation
Stainless steels and corrosion resisting, heat-resisting and creep resisting alloys. Grades
Non-destructive Testing. Welded Joints. Ultrasonic Methods
Compilation and execution of safety data sheet of chemical products
Cable products for nuclear power plants. Technical requirements of the operating organization
Rolling stock of railways. Springs cylindrical screw. Certification requirements
Loads and actions
Technical Regulations of the Eurasian Economic Union "On Restriction of the Use of Hazardous Substances in Electrical and Radioelectronic Products"
Degrees of protection provided by enclosures (IP Code)
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.