R 50.1.009-96

Р 50.1.009-96

The procedure for the consideration of administrative offense cases by the bodies of the State Standard of Russia

Порядок рассмотрения органами Госстандарта России дел об административных правонарушениях

Status: Effective

The recommendations are intended to provide legal assistance to officials of the Gosstandart of Russia and its territorial bodies exercising state control and supervision over compliance with the mandatory requirements of state standards, rules of mandatory certification, requirements of regulatory documents on ensuring the uniformity of measurements and authorized to consider administrative offenses and impose fines. The recommendations were developed in accordance with the RSFSR Code of Administrative Offenses and amendments made to it by the Federal Law "On Amendments and Amendments to the Legislative Acts of the Russian Federation" in connection with the adoption of the laws of the Russian Federation "On Standardization", "On ensuring the uniformity of measurements", " On certification of products and services. "

Рекомендации предназначены для оказания правовой помощи должностным лицам Госстандарта России и его территориальных органов, осуществляющим государственный контроль и надзор за соблюдением обязательных требований государственных стандартов, правил обязательной сертификации, требований нормативных документов по обеспечению единства измерений и уполномоченным рассматривать дела об административных правонарушениях и налагать штрафы. Рекомендации разработаны в соответствии с Кодексом РСФСР об административных правонарушениях и дополнениями, внесенными в него Федеральным законом "О внесении изменений и дополнений в законодательные акты Росийской Федерации" в связи с принятием законов Российской Федерации "О стандартизации", "Об обеспечении единства измерений", "О сертификации продукции и услуг".

Choose Language: 
Format: Electronic (pdf/doc)
Page Count: 26

Approved: Gosstandart of Russia, 4/29/1996

SKU: RUSS163141

Price: $347.94




The Product is Contained in the Following Classifiers:

PromExpert » SECTION III. LABOR PROTECTION AND SAFETY » I Legal and organizational basis of labor protection » 2 Labor Safety Management » 2.1 The main provisions of public administration of labor »

PromExpert » SECTION I. TECHNICAL REGULATION » IV Conformity assessment of products and services » 1 Key points infield of conformity assessment »

ISO classifier » 03 SOCIOLOGY. SERVICES ORGANIZATION AND MANAGEMENT OF COMPANIES. ADMINISTRATION. TRANSPORT » 03.120 Quality » 03.120.10 Quality Management and Quality Assurance »

ISO classifier » 03 SOCIOLOGY. SERVICES ORGANIZATION AND MANAGEMENT OF COMPANIES. ADMINISTRATION. TRANSPORT » 03.120 Quality » 03.120.20 Certification of products and companies. Conformity assessment »

ISO classifier » 03 SOCIOLOGY. SERVICES ORGANIZATION AND MANAGEMENT OF COMPANIES. ADMINISTRATION. TRANSPORT » 03.160 Legislation. Administration »


The Document References:

PR 50.2.002-94: Procedure for Government Metrological Inspection of the Manufacturing, Condition, and Application of Measuring Devices Certified Using Measurement Procedures, Standards, and Compliance with Metrological Standards and Codes

PR 50.2.003-94: National Measurement Standards. Procedure for Government Metrological Supervision of Quantity of Goods Disposed of During Trading Transactions

PR 50.2.004-94: State system for ensuring uniformity of measurements. The procedure of state metrological supervision over the number of packaged goods in packages of any kind during their packaging and sale

PR 50.2.005-94: National Measurement Standards. Procedures for Licensing Activity for the Manufacture, Repair, Sales, and Leasing of Measuring Devices

The Document is Referenced By:

R 50.1.011-96: State supervision of compliance with the mandatory requirements of state standards at the stages of development, preparation for the production and operation of industrial products

Customers Who Viewed This Item Also Viewed:

Steel welded vessels and apparatus. General technical conditions
Language: English
Price: $108.90
Basic and safety principles for man-machine interface, marking and identification. Identification of conductors by colours and alphanumerics.
Language: English
Price: $57.42
Occupational safety standards system. Noise. General safety requirements
Language: English
Price: $150.48
Flanges for valves, fittings and pipelines for pressure to PN 250. Design, dimensions and general technical requirements
Language: English
Price: $293.04
Buildings and constructions. Method for determining wind loads on the building envelope
Language: English
Price: $88.22
Valves of pipeline technological systems of nuclear power plants, not affecting safety. General technical requirements
Language: English
Price: $448.52
Loads and actions
Language: English
Price: $495.00
Technical Regulations of the Eurasian Economic Union "On the Safety of Chemical Products"
Language: English
Price: $106.03
Erecting cranes. Removable lifting devices and containers. Operation
Language: English
Price: $651.36
Vessels and Apparatus. Norms and methods of strength calculation from wind loads, seismic influence and other external loads
Language: English
Price: $311.85
Industrial equipment. General safety requirements
Language: English
Price: $71.53
Three-phase asynchronous motors. General specifications.
Language: English
Price: $100.98
Rules for Development, Production and Application of Membranous Safety Equipment
Language: English
Price: $242.55
Asbestos fabric
Language: English
Price: $105.54
Steel butt-welded flanges for Pnom from 0,1 to 20,0 MPa (from 1 to 200 kgf/cm2). Design and dimensions
Language: English
Price: $130.68
Welded joints. Methods of mechanical properties determination
Language: English
Price: $218.79
Strength calculation norms for stationary boilers and steam and hot water pipelines.
Language: English
Price: $445.50
Guidelines for technological design of seaports. Parts I and II. Ministry of Transport, DMT. Soyuzmorniiproekt, 1993
Language: English
Price: $2,214.83
Steel castings. General specifications
Language: English
Price: $170.28
Norms of technological design of seaports. Ministry of Transport, DMT Soyuzmorniiproekt, 1997
Language: English
Price: $346.50

YOUR ORDERING MADE EASY!

RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.

Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.

We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.

Placing Your Order

Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).

Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.

For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.

For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.

Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.

Your Order Best Quality and Authenticity Guarantee

Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).

We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.

We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.

All Codes and Regulations

All Categories

Send us a message live-chat-up-arrow live-chat-down-arrow

Leave your message in the form below, and we will write back by e-mail!