Recommendations. Hot rolled steel and bent rolled steel profiles. Unified profile mix
Рекомендации. Профили проката стальные горячекатаные и гнутые. Унифицированный профильный сортамент
Status: Effective
The recommendations establish a unified assortment of hot-rolled and curved rolled profiles that can be used without restriction, are not allowed to be used in newly created and modernized equipment and are subject to discontinuation since 1991, as well as the basic requirements for their development. Recommendations do not apply to hot-pressed, forged, stamped profiles, hot-rolled and bent profiles manufactured for intra-industry use.
Рекомендации устанавливают унифицированный сортамент горячекатаных и гнутых профилей проката, допускающихся к применению без ограничения, не допускающихся к применению во вновь создаваемой и модернизируемой технике и подлежащих снятию с производства с 1991 г., а также основные требования к их разработке. Рекомендации не распространяются на горячепрессованные, кованые, штампованные профили, горячекатаные и гнутые профили, изготовляемые для внутриотраслевого применения.
Choose Language:
Format: Electronic (pdf/doc)
Approved: Gosstandart of the USSR,
6/22/1990
SKU: RUSS163239
The Product is Contained in the Following Classifiers:
PromExpert »
SECTION I. TECHNICAL REGULATION »
II Standardization »
2 Activities and organization of work on standardization »
ISO classifier »
77 METALLURGY »
77.140 Iron and steel products »
77.140.70 Steel profiles »
National standards »
77 METALLURGY »
77.140 Iron and steel products »
77.140.70 Steel profiles »
National Standards for KGS (State Standards Classification) »
Latest edition »
V Metals and metal products »
V2 Carbon steel of ordinary quality (ordinary stock) »
V22 Rolled and shaped steel »
National Standards for KGS (State Standards Classification) »
Latest edition »
V Metals and metal products »
V3 Steel quality and high quality (quality stock) »
V32 Rolled and shaped steel »
National Standards for OKSTU »
FINISHED ROLLED STEELS (INCLUDING BILL FOR EXPORT) »
General rules and regulations »
National Standards for OKSTU »
PRODUCTS OF FURTHER TRANSITION FROM ROLLED METAL, BALLS, CILBEPS »
Bent steel profiles »
The Document References:
GOST 103-76: Hot-rolled steel strip. Dimensions
GOST 10551-75: Steel roll-formed corrugated sections. Range
GOST 12135-75: The plates of spike fastening for railway P50 rails. Design and dimensions
GOST 12492.10-90: Agricultural machinery. Trapezoidal section for points. Dimensions
GOST 12492.12-90: Agricultural machinery. Section for ring of trailer slewing plate. Dimensions
GOST 12492.13-90: Agricultural machinery. C-shaped section. Dimensions
GOST 12492.14-90: Agricultural machinery. Section for end transmission case. Dimensions
GOST 12492.15-90: Flat section with slope for agriculture machinery
GOST 12492.1-90: Agricultural machinery. Channel section. Dimensions
GOST 12492.2-90: Agricultural machinery. Low-channel section. Dimensions
GOST 12492.3-90: Agricultural machinery. Bulged strip section. Dimensions
GOST 12492.4-90: Agricultural machinery. One-notched section. Dimensions
GOST 12492.5-90: Agricultural machinery. Section for wheel rims. Dimensions
GOST 12492.6-90: Agricultural machinery. Ribbed bar strip section. Dimensions
GOST 12492.7-90: Agricultural machinery. Section for marsh plough cutters. Dimensions
GOST 12492.8-90: Agricultural machinery. Rounded strip section. Dimensions
GOST 12492.9-90: Agricultural machinery. Section for subsurface cultivator wings. Dimensions
GOST 13229-78: Steel bent Z-shaped sections. Dimensions
GOST 14635-79: Steel cold-shaped special profiles for wagon building. Grading
GOST 15.001-88: System of product development and launching into manufacture. Products of industrial and technical designation
GOST 16210-77: Railway rails type P75. Design and dimensions
GOST 17152-89: Steel hot-rolled shapes for cutting blades of earth-moving machines. General specifications
GOST 17507-85: Switch point rails OP65. Dimensions
GOST 17508-85: Switch point rails OP50. Dimensions
GOST 18662-83: CВП-hot-rolled section for mine timbering. Dimensions
GOST 19127-73: Double-headed fish plates for P43 rails. Design and dimensions
GOST 19128-73: Double-headed fish plates for P50 rails. Design and dimensions
GOST 19240-73: Rails for ground and suspended tracks. Dimensions
GOST 19425-74: Special-purpose steel I-beams and channels. Dimensions
GOST 19771-74: Roll-formed steel equal leg angles. Dimensions
GOST 19772-74: Roll-formed steel unequal leg angles. Dimensions
GOST 21937-76: Hot-rolled steel unsymmetrical bulb section for shipbuilding. Dimensions
GOST 22343-90: Clamp for indirect rail fastening of railways. Specifications
GOST 25577-83: Steel bent closed welded square and rectangular sections. Specifications
GOST 2590-88: Round steel bars. Dimensions
GOST 2591-88: Square Hot-rolled Steel Bars Dimensions
GOST 26020-83: Hot-rolled steel I-beam with parallel flange edges. Dimensions.
GOST 26110-84: Rails for PK75 check rails. Dimensions
GOST 26168-84: Switch point rails OP75. Dimensions
GOST 26577-85: Fur lined gloves and mittens for service man. Specification
GOST 2879-88: Hot-rolled hexagonal steel. Range of sizes
GOST 4121-76: Crane rails. Specifications
GOST 4405-75: Hot-rolled and wrought tool steel strips. Dimensions
GOST 4728-96: Axle billets for the railway rolling stock of 1520 mm gauge
GOST 4781-85: Hot-rolled steel shapes for sheet piles. Specifications
GOST 5157-83: Hot-rolled steel sections for different purposes. Dimensions
GOST 5210-82: Hot-rolled profiled steel for files, rasp files and chisels
GOST 5267.10-90: Section of tread rings. Dimensions
GOST 5267.11-90: Section of car threshold. Dimensions
GOST 5267.12-90: Section for door closing. Dimensions
GOST 5267.13-90: Section for door binding. Dimensions
GOST 5267.1-90: Channels. Dimensions
GOST 5267.2-90: Z-section. Dimensions
GOST 5267.3-90: Z-section for centre girder. Dimensions
GOST 5267.4-90: Section of upper binding. Dimensions
GOST 5267.5-90: I-beam section № 19 for centre girder. Dimensions
GOST 5267.6-90: Section of car post. Dimensions
GOST 5267.7-90: Section of upper sheet of open-box car frame cross beam. Dimensions
GOST 5267.8-90: Section of automatic coupling thrust plates. Dimensions
GOST 5267.9-90: Section for automatic coupling wedge. Dimensions
GOST 5422-73: Hot-rolled special steel sections for tractors. Technical specifications
GOST 5781-82: Hot-rolled steel for reinforcement of ferroconcrete structures. Specifications
GOST 6368-82: Type R8, R11, R18 and R24 narrow-gauge railway rails. Design and dimensions
GOST 6636-69: Standard linear dimensions
GOST 7056-77: The plates of spike fastening for type Р43 rails. Construction and dimensions
GOST 7173-54: Railway rails type Р43 for industrial conveyance and hoisting lines. Construction and dimensions
GOST 7174-75: Railway rails type Р50. Construction and dimensions
GOST 7511-73: Steel sections for window and lantern transoms and window panels of industrial buildings. Specifications
GOST 8141-56: Fasteners for narrow gauge railways. Fishplates. General specifications
GOST 8142-89: Rail soles for R18, P24, P33 rail types
GOST 8161-75: Railway rails type Р65. Construction and dimensions
GOST 8193-73: Double headed fish plates for Р65, Р75 rails. Design and dimensions
GOST 8194-75: Plates of spike fastening for railway Р65 and Р75 rails. Design and dimensions
GOST 8239-89: Steel hot-rolled I-beams
GOST 8240-97: Hot-rolled steel channels. Assortment
GOST 8278-83: Roll-formed steel equal channels. Dimensions
GOST 8281-80: Roll-formed steel unequal channels Dimensions
GOST 8282-83: Bent-steel С-shaped equal flange sections. Dimensions
GOST 8283-77: Cold-formed equal omega-shaped steel. Range
GOST 8319.0-75: Hot-rolled steel periodical lengthwise-rolled profiles. Specifications
GOST 8319.13-75: Hot-rolled steel periodical lengthwise-rolled profiles for front axle section of ГАЗ-53-12 automobile. Dimensions
GOST 8320.0-83: Periodic sections produced by helical rolling. General technical requirements
GOST 8320.13-83: Periodic sections produced by cross-helical rolling for journals of flour-grinding rolls. Dimensions
GOST 8320.1-83: Periodic three-step sections produced by cross-helical rolling for electric motor shafts. Dimensions
GOST 8509-86: Rolled angular equilateral steel
GOST 8510-86: Hot-rolled steel unequal-leg angles. Dimensions
GOST 9234-74: Steel bent sheet sections with trapezoid-shaped corrugation. Dimensions
GOST 9235-76: Hot-rolled steel. Symmetrical bulb for shipbuilding. Dimensions
GOST 9797-85: Rails for RK50 check rails. Dimensions
GOST 9798-85: Rails for RK65 check rails. Dimensions
OST 14-13-75: Hot-rolled steel. Bloom. The range of products.
OST 14-21-77: Tubular billet made of carbon, low-alloyed and alloyed steels. Technical requirements.
OST 14-2-205-87: Hot-rolled square steel billets. Range.
TU 14-2-133-74: Hot-rolled steel. Billet for grinding balls
TU 14-2-230-76: Hot rolled rental
TU 14-2-285-77: Hot-rolled angle steel ravnopolochnaya economical
TU 14-2-443-81: Hot-rolled angle steel unequal economical
|
Customers Who Viewed This Item Also Viewed:
 |
Industrial process measurement and control equipment. Reliability. General requirements and test methods
Language: English |
Metals. Methods of tension test
Language: English |
Gauged corrosion-resistant, heat-resistant and high-temperature steel shape
Language: English |
Heating, ventilation and air conditioning. Fire Safety Requirements
Language: English |
Reliability of atomic power stations and their equipment. General statements and reliability index nomenclature
Language: English |
Electromagnetic compatibility of technical equipment. Technical equipment for nuclear power plants. Requirement and test methods
Language: English |
Billets made of corrosion-resistant steels of 12Х18Н9Т, 12Х18Н10Т, 08Х18Н10Т, 10Х17Н13М2Т, 12Х18Н12Т and 03Х21Н32М3Б types.
Language: English |
Dependability in technics. Terms and definitions
Language: English |
System of products development and launching into manufacture. Technical assignment. Requirements to contents and form of presentation
Language: English |
Reliability in technology. Composition and general rules for setting reliability requirements
Language: English |
Stainless corrosion resisting, heat-resisting and creep resisting steel and alloy on iron-nickel-based products. Specifications
Language: English |
Natural gas for industrial and municipal purposes. Technical conditions
Language: English |
Global navigation satellite system. Emergency response system in case of accidents. Test methods for emergency services call device/system for compliance with the requirements for the quality of loudspeaker communication in the vehicle cab.
Language: English |
 |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.