imgalt

GOST 10495-80

ГОСТ 10495-80

Hexagon nuts for flange joints for pn above 10 to 100 MPa (above 100 to 1000 kgf/cm2)

Гайки шестигранные для фланцевых соединений на ру свыше 10 до 1100 МПа

Status: Effective - Supersedes. The limitation of effectiveness has been lifted: Resolution of the State Standard No. 159 of 02.25.91

The standard applies to hexagonal nuts for flange fittings, fittings and pipelines used in the chemical and petrochemical industries on Ru over 10 to 100 MPa with temperatures ranging from minus 50 to plus 510 ° С.

Стандарт распространяется на шестигранные гайки для фланцевых соединений арматуры, соединительных частей и трубопроводов, используемых в химической и нефтехимической промышленностях на Ру свыше 10 до 100 МПа с температурой от минус 50 до плюс 510 °С.

Choose Language: 
Format: Electronic (pdf/doc)

Approved: Gosstandart of the USSR, 12/30/1980

SKU: RUSS16332

Price: $250.00



imgalt

The Product is Contained in the Following Classifiers:

Construction (Max) » Standards » Other state standards used in construction » 23 Hydraulic and pneumatic systems and components for general use. »

ISO classifier » 23 HYDRAULIC AND PNEUMATIC SYSTEMS AND GENERAL PURPOSE COMPONENTS » 23.040 Pipelines and their components » 23.040.60 Flanges, couplings and connections »

National standards » 23 HYDRAULIC AND PNEUMATIC SYSTEMS AND GENERAL PURPOSE COMPONENTS » 23.040 Pipelines and their components » 23.040.60 Flanges, couplings and connections »

National Standards for KGS (State Standards Classification) » Latest edition » G Machines, equipment and tools » G1 General parts and units of machines » G18 Fittings and pipeline connections »


As a Replacement Of:

GOST 10495-74: Nuts clean hexagonal for flanged connections for Pn 9,81-98,10 MPa (100-1000 kgf / cm2)

The Document References:

GOST 1497-84: Metals. Methods of tension test

GOST 16093-2004: Basic norms of interchangeability. Metric screw thread. Tolerances. Clearance fits

GOST 1759.0-87: Bolts, screws, studs and nuts. Specifications.

GOST 17769-83: Fastening details. Rules of acceptance

GOST 18160-72: Fasteners. Packing. Marking. Transportation and storage

GOST 20072-74: Heat-resistant steel

GOST 24705-2004: Вasic norms of interchangeability. Metric screw thread. Basic dimensions

GOST 4543-71: Structural alloyed steel

GOST 7564-97: Rolled products general rules of samples, rough specimens and test pieces selection for mechanical and technological testing

GOST 9.301-86: Unified system of corrosion and ageing protection. Metal and non-metal inorganic coatings. General requirements

GOST 9.302-88: Unified system of corrosion and ageing protection. Metal and non-metal inorganic coatings. Control methods

GOST 9.303-84: Unified system of corrosion and ageing protection. Metallic and non-metallic inorganic coatings. General requirements for selection

GOST 9.306-85: Unified system of corrosion and ageing protection. Metal and non-metal inorganic coatings. Symbols

GOST 9012-59: Metals. Method of Brinell hardness measurement

GOST 9454-78: Metals. Method for testing the impact strength at the low, room and high temperature

The Document is Referenced By:

ATK 26-18-10-94: Devices for Installation of Temperature Measuring Devices for Use at Nominal Pressure from 0.6 to 16.0 MPa. Plugs. General Technical Requirements

GOST 22810-83: Assembly units and pipeline parts. Pocket angles for resistance thermometers and thermocouple thermometers for Pnom 9,81-98,1 MPa (100-1000 kgf/sm sq). Construction and dimensions

GOST 22811-83: Assembly units and pipeline parts. Arms for resistance thermometers and thermocouple thermometers for Pnom 9,81-98,1 MPa (100-1000 kgf/sm sq). Construction and dimensions

GOST 32569-2013: Steel pipe technology. Requirements for design and operation of explosive and chemically dangerous production

GOST 33260-2015: Pipeline valves. Мetals used in pipeline valves production. Basic requirements for choice of materials

GOST R 52630-2006: Steel welded vessels and apparatus. General specifications

GOST R 52630-2012: Steel welded vessels and apparatus. General specifications.

GOST R 54803-2011: High-pressure welded steel vessels. General technical requirements

GOST R 55429-2013: Hoop-in detachable joints of pipelines. Design, dimensions and general specifications

GOST R 55430-2013: Detachable pipe joints. Evaluation of technical condition and methods of testing. Operation safety

IM 4-12-95: Automation systems. Handbook of materials. Part 1. Basic materials

OST 24.201.03-90: Steel high-pressure vessels and devices. General technical requirements.

OST 26.260.18-2004: Process modules for oil and gas industry. General technical specifications

OST 26-01-136-81: Assembling units of steel pipelines on pressure over 9,81 to 98,1 MPa (over 100 to 1000 kgf/cm2) of complete technological lines. General specifications.

OST 26-01-48-82: Assembling units and pipeline details. Flanged connections with bilateral cap or ring. Design and dimensions.

OST 26-01-49-82: Assembling units and pipeline details for working pressure of 32 MPa (320 kgf/cm2). General specifications.

OST 26-02-376-78: Technological units of gas and oil industry. General technical requirements.

OST 26-18-5-88: Technological units of gas and oil industry. General technical requirements.

PB 03-108-96: Process pipeline design and safe operation rules

PB 03-384-00: Rules for design, manufacture and acceptance of steel welded vessels and apparatus

PB 03-576-03: Regulations of design and safe operation of pressure vessels

PB 10-115-96: Regulations of design and safe operation of pressure vessels

RD 26.260.010-2002: The leading document on standardization. The list of standard documentation on standardization on the cells and devices working under pressure.

RD 26.260.010-97: List of Regulatory Documents on Standardization for Pressure Vessels and Apparatus

RD 26-01-28-86: Pipelines and high-pressure apparatus for ammonia and methanol production. Steel grades. Terms of use

RD RTM 26-01-44-78: Piping Components for Use at Pressure Above 10 to 100 MPa. Strength Standards and Calculation Methods

SA 03-005-07: Industrial pipelines of oil-refining, petrochemical and chemical industry. Requirements to configuration and operation

ST TsKBA 012-2005: Pipe fittings. Studs, bolts, nuts and washers for pipe fittings. Technical requirements

Customers Who Viewed This Item Also Viewed:

imgalt imgalt
Controllers acting without
Language: English
Price: $151.00
imgalt
Building materials. Methods for combustibility test
Language: English
Price: $162.00
imgalt
Building materials spread flame test method
Language: English
Price: $147.00
imgalt
Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V. Non-sheathed cables for fixed wiring
Language: English
Price: $283.00
imgalt
Clear sheet glass. Specifications
Language: English
Price: $250.00
imgalt
Natural gas. Methods of calculation of physical properties. Calculation of physical properties on base information on density of standards conditions and nitrogen and carbon dioxide contents
Language: English
Price: $139.00
imgalt
Steel welded vessels and apparatus. General technical conditions
Language: English
Price: $549.00
imgalt
System of Standards for Occupational Safety and Health (SSBT). Personal protective equipment for respiratory organs. Self-rescuers insulating on chemically bound or with compressed oxygen. Technical requirements. Test methods. Marking. Sampling rules
Language: English
Price: $700.00
imgalt

YOUR ORDERING MADE EASY!

RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.

Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.

We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.

Placing Your Order

Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).

Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.

For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.

For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.

Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.

Your Order Best Quality and Authenticity Guarantee

Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).

We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.

We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.

All Codes and Regulations

All Categories

Send us a message Expand Collapse

Leave your message in the form below, and we will write back by e-mail!