Temporary technical requirements for equipment for opening pipelines
Временные технические требования на оборудование для вскрытия газопроводов
Status: Not effective
The document “Temporary technical requirements for equipment for opening pipelines” has been developed with the aim of establishing the necessary level of technical requirements for equipment for opening pipelines during the examination of technical conditions and qualification tests.
Документ «Временные технические требования на оборудование для вскрытия газопроводов» разработаны с целью установления необходимого уровня технических требований к оборудованию для вскрытия газопроводов при проведении экспертизы технических условий и квалификационных испытаний.
Choose Language:
Format: Electronic (pdf/doc)
Approved: OJSC Gazprom,
12/19/2006
SKU: RUSS163475
The Product is Contained in the Following Classifiers:
Construction (Max) »
Regulations »
Sectoral and departmental regulatory and methodological documents »
Design and construction of oil and gas industry facilities »
Welding regulations »
Welding work »
Welding regulations »
Pipelines »
Welding regulations »
Welding materials »
Welding regulations »
Non-destructive control »
Welding regulations »
Mechanical Testing »
Welding regulations »
Defects »
Welding regulations »
Welding work »
Surfacing »
Welding regulations »
Welding work »
Dusting »
Welding regulations »
Welding materials »
Gases »
ISO classifier »
75 EXTRACTION AND PROCESSING OF OIL, GAS AND RELATED PRODUCTION »
75.200 Equipment for oil refining, oil products and natural gas »
2003.200.13 Pipelines and their components »
As a Replacement Of:
RD 558-97: Guidance Document for Pipe Welding Technology in Repair and Renovation of Gas Pipelines
VRD 39-1.10-001-99: Guide to Analysis of Results of Internal Inspection of Piping and Hazard Assessment of Defects
VRD 39-1.10-004-99: Recommended Practice for Quantitative Assessment of the Condition of Trunk Gas Pipelines with Corrosion Defects, Ranking of Them in Terms of Hazard Level, and Determination of Service Life Remaining
VRD 39-1.10-013-2000: Guidelines for the Use of Composite Materials Developed by Porseal Ltd (St. Petersburg) for Repair Purposes at Petroleum and Natural Gas Facilities (Includes "Analysis of Carrying Capacity of 530-1420-mm Pipelines Repaired with the Use of Composite Materi
VRD 39-1.10-063-2002: Instructions for evaluating the performance and rejection of pipes with dents and corrugations
VSN 39-1.10-001-99: Guidelines for the Use of Composite Materials for the Repair of Defective Pipes of Trunk Gas Pipelines
The Document References:
GOST 12503-75: Steel Methods of ultrasonic control. General requirements
GOST 14782-86: Nondestructive testing. Welded joints. Ultrasonic methods
GOST 19200-80: Iron and steel castings. Terms and definitions of defects
GOST 20415-82: Non-destructive testing. Acoustic methods. General principles
GOST 21014-88: Rolled products of ferrous metals. Surface defects. Terms and definitions
GOST 21105-87: Non-destructive testing. Method of magnetic particle testing
GOST 23479-79: Non-destructive testing. Optic methods. General requirements
GOST 23667-85: Non-Destructive Testing Ultrasonic Flaw Detectors Methods for Measuring the Main Parameters
GOST 24289-80: Eddy current non-destructive testing. Terms and definitions
GOST 2601-84: Welding of metals. Terms and definitions of basic concepts
GOST 28702-90: Non-destructive testing. Ultrasonic thickness gauges. General technical requirements
GOST 3242-79: Welded joints
GOST 5272-68: Corrosion of Metals. Terms
GOST 7512-82: Nondestructive testing. Welded joints. Radiography method
GOST 8.283-78: State system for ensuring the uniformity of measurements. Electromagnet flaw detector. Methods and means of verification
PB 03-372-00: Non-destructive test laboratory certification rules and main requirements.
PB 03-440-02: Attestation rules for nondestructive inspection personnel
RD 03-606-03: Instructions for visual and measuring control
RD 08-183-98: Procedure for Preparation and Storage of Documents Confirming the Safety of the Maximum Permissible Operating Pressure for Operation of Trunk Pipeline Facilities
RD 558-97: Guidance Document for Pipe Welding Technology in Repair and Renovation of Gas Pipelines
SNiP 3.02.01-87: Earthen structures, foundation and basis
VRD 39-1.10-001-99: Guide to Analysis of Results of Internal Inspection of Piping and Hazard Assessment of Defects
VRD 39-1.10-004-99: Recommended Practice for Quantitative Assessment of the Condition of Trunk Gas Pipelines with Corrosion Defects, Ranking of Them in Terms of Hazard Level, and Determination of Service Life Remaining
VRD 39-1.10-013-2000: Guidelines for the Use of Composite Materials Developed by Porseal Ltd (St. Petersburg) for Repair Purposes at Petroleum and Natural Gas Facilities (Includes "Analysis of Carrying Capacity of 530-1420-mm Pipelines Repaired with the Use of Composite Materi
VRD 39-1.10-023-2001: Instructions for inspection and repair of gas pipelines subject to SCC, in pits
VRD 39-1.10-063-2002: Instructions for evaluating the performance and rejection of pipes with dents and corrugations
VRD 39-1.11-014-2000: Procedural Guidelines for Inspection and Identification of Steel Pipes for Gas and Petroleum Pipelines
VSN 1-84: T-Joints and T-Type Connections, Welded, for Nominal Pressure of 5.5 and 7.5 MPa (55 and 75 kgf/sq. cm)
VSN 39-1.10-001-99: Guidelines for the Use of Composite Materials for the Repair of Defective Pipes of Trunk Gas Pipelines
VSN 51-1-97: Work Execution Requirements for Overhaul of Trunk Pipelines
|
Customers Who Viewed This Item Also Viewed:
 |
Controllers acting without
Language: English |
Building materials. Methods for combustibility test
Language: English |
Building materials spread flame test method
Language: English |
Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V. Non-sheathed cables for fixed wiring
Language: English |
Clear sheet glass. Specifications
Language: English |
Steel welded vessels and apparatus. General technical conditions
Language: English |
System of Standards for Occupational Safety and Health (SSBT). Personal protective equipment for respiratory organs. Self-rescuers insulating on chemically bound or with compressed oxygen. Technical requirements. Test methods. Marking. Sampling rules
Language: English |
 |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.
