imgalt

GOST 1412-85

ГОСТ 1412-85

Flakish graphite cast iron

Чугун с пластинчатым графитом для отливок

Status: Effective. The limitation of the effectiveness period has been lifted: Protocol No. 7-95 of the IGU dated 01.03.95 (IUS 11-1995)

The standard applies to cast iron with lamellar graphite for castings and establishes its brands, determined on the basis of temporary resistance of cast iron under tension.

Стандарт распространяется на чугун с пластинчатым графитом для отливок и устанавливает его марки, определяемые на основе временного сопротивления чугуна при растяжении.

Choose Language: 
Format: Electronic (pdf/doc)

Approved: Gosstandart of the USSR, 9/24/1985

SKU: RUSS16363

Price: $118.00



imgalt

The Product is Contained in the Following Classifiers:

Construction (Max) » Standards » Other state standards used in construction » 77 Metallurgy »

Standards for pipe fittings (TPA) » 10. Production » 10.2 Billets (forgings, stampings, rolling, castings, etc.) »

ISO classifier » 77 METALLURGY » 77.080 Ferrous metals » 77.080.10 Cast iron »

National standards » 77 METALLURGY » 77.080 Ferrous metals » 77.080.10 Cast iron »

National Standards for KGS (State Standards Classification) » Latest edition » V Metals and metal products » V1 Burden ferrous metals and slags » V11 Cast Iron »

National Standards for OKSTU » PRODUCTS FOR GENERAL ENGINEERING APPLICATIONS » Casting (castings) iron »


The Document References:

GOST 24648-90: Pig iron for castings. Sampling and making the specimen for mechanical testing.

GOST 27208-87: Cast iron casting. Methods of mechanical testing

The Document is Referenced By:

GOST 10272-77: Double entry centrifugal pumps. Specification

GOST 10617-83: Heating boilers with heat output heating capacity from 0.10 to 3.15 mw

GOST 10673-75: T-slot cutters with hard metal tips. Specifications

GOST 10851-94: Friction articles manufactured from retinax

GOST 10905-86: Surface plates and face-plates. Specifications

GOST 11046-87: Continuous airless shot-blust cleaning rooms basic parameters and dimensions

GOST 11127-78: Wooden drums for wire ropes. Specifications

GOST 11264-73: Chocks. Specifications

GOST 11265-73: Bitts. Specifications

GOST 1142-90: Horse-driven load carriages. Specifications

GOST 1153-2019: Brackets for washbasins and sinks. Technical specifications

GOST 1153-76: Supports for lavatories and sinks. Technical requirements

GOST 11781-74: Moulding vee shoe. Design

GOST 11782-74: Moulding round shoe. Design

GOST 1198-93: Asbestos brake bands

GOST 12.4.091-80: Plastic miner's helmets

GOST 12.4.128-83: Safety helmets

GOST 12393-77: Fittings for overhead system of electric railways. General specifications

GOST 12509-75: Carbide tipped counterbores. Technical requirements

GOST 12816-80: Flanges for valves, fittings and pipelines for Pnom from 0,1 to 20 MPa (from 1 to 200 kgf/sq sm). General technical requirements

GOST 12945-67: Unequal angle plates for machine retaining devices. Design and dimensions

GOST 12948-67: Cast iron plates for machine retaining devices. Design and dimensions

GOST 12949-67: Boxes for machine retaining devices. Design and dimensions

GOST 12950-67: Channels for machine retaining devices. Design and dimensions

GOST 12951-67: Angle plates for machine retaining devices. Design and dimensions

GOST 12952-67: Ribbed angle plates for machine retaining devices. Design and dimensions

GOST 12953-67: Trihedrons for machine retaining devices. Design and dimensions

GOST 12954-67: Tetragons for machine retaining devices. Design and dimensions

GOST 12955-67: Right ribs for machine retaining devices. Design and dimensions

GOST 12956-67: Left ribs for machine retaining devices. Design and dimensions

GOST 12957-67: Right side ribs for machine retaining devices. Design

GOST 12958-67: Left side ribs for machine retaining devices. Design and dimensions

GOST 12959-67: Double sided right ribs for machine retaining devices. Design and dimensions

GOST 12960-67: Double-sided left ribs for machine retaining devices. Design and dimensions

GOST 12961-67: Claws for machine retaining devices. Design and dimensions

GOST 13113-83: Die bases for cold plastic working dies with guide posts located on central line. Construction and dimensions

GOST 13218.11-80: Rolling bearings pillow blocks. Technical requirements

GOST 13219.17-81: Cups for ball bearings of pillow blocks. Technical requirements

GOST 13556-91: Building tower pillars building tower pillars

GOST 13781.2-77: Lead joints for 1; 6 and 10 kV power cables. Complete set of details and mounting materials. Specifications

GOST 13781.3-79: Couplings of for power cables with paper insulation for 20 and 35 kV Sets of parts and installation materials. Specification

GOST 14677-83: Sheet stamping dies. Plates-blanks for dies with four guide assemblies. Design and dimensions

GOST 1557-67: Stepped supports for machine retaining devices. Design and dimensions

GOST 1559-67: Screw sprags for machine retaining devices. Design

GOST 15960-79: Friction flexible asbestos materials and products of them. Specifications

GOST 15960-96: Asbestos friction elastic materials

GOST 16438-70: Sand and metal moulds for making of fluidity of metals tests

GOST 16463-2016: Solid carbide keyway cutters. Specifications

GOST 16518-87: Machine vice hand and mechanical drives. General specifications

GOST 16518-96: Machine vice with hand and mechanical drives

GOST 16817-71: Sand and metal moulds for determination of linear shrinkage of non-ferrous metals and alloys. Design and dimensions. Technical requirements

GOST 16818-85: Sand mould intended to produce the sample blanks for testing the mechanical properties of flaky graphite grey cast iron

GOST 16890-71: Plates for knee rack-and-pinion-operated jigs. Design

GOST 16893-71: Plates for portal rack-and-pinion-operated jigs. Design

GOST 16935-93: Manually and power driven round rotary tables

GOST 17166-71: Accessory tool for metal-cutting machines. General technical requirements

GOST 17277-71: Solid carbide twist drills. Specifications

GOST 17366-80: Welded thick-walled steel barrels for chemical products

GOST 17412-72: Electrical articles for the cold climate regions. Technical requirements, acceptance and test methods

GOST 17584-72: Cast iron joining rings and fittings for asbestos cement pressure pipes

GOST 1786-88: Friction linings. Specifications

GOST 18103-84: Installations for manufacturing reinforced concrete three-dimensional elements of sanitary engineering cabins and lift shafts. Specifications

GOST 1811-2019: Ladders for building sewage systems. Technical specifications

GOST 1811-97: Traps for sewer systems in buildings. Specifications

GOST 18297-80: Enamelled cast-iron sanitary appliances. General technical requirements and test methods

GOST 18297-96: Pig-iron enameled sanitary devices. Technical conditions

GOST 18514-73: End caps for rolling bearing blocks. Technical requirements

GOST 18812-81: Sheet stamping dies. Holders for guide posts with flute and guide bushes. Design and dimensions

GOST 19257-73: Holes for threading metric thread. Diameters

GOST 19305-73: Centrifugal moulds with threaded shank and latch locks. Construction and dimensions

GOST 19306-98: Centrifugal moulds with threaded shank and centrifugal locks. Construction and dimensions

GOST 19307-73: Centrifugal moulds with flange and latch locks. Construction and dimensions

GOST 19308-98: Centrifugal moulds with flange and centrifugal locks. Construction and dimensions

GOST 19309-98: Centrifugal moulds with flange, inserts and centrifugal locks. Construction and dimensions

GOST 19310-98: Pushers for centrifugal moulds. Construction and dimensions

GOST 19311-98: Caps for centrifugal moulds. Construction and dimensions

GOST 19316-98: Centrifugal moulds. Specifications

GOST 19410-74: Metal core boxes. Specifications

GOST 19879-74: Carbide tipped machine taps for pipe cylindrical thread. Specifications

GOST 20131-80: Pattern plates

GOST 20155-74: Pattern plates with deep changeable wooden inserts for moulding box having inside dimensions 400x300 mm, 450x350 mm, 500x400 mm for moulding foundry machines without turn of half mould with squeezing. Design and dimensions

GOST 20156-74: Pattern plates with changeable wooden insert for moulding box having inside dimensions 1000x600 mm for moulding foundry machines without turn of half mould with squeezing. Design and dimensions

GOST 20157-74: Pattern plates with deep changeable wooden inserts for moulding box having inside dimensions 600x500 mm for moulding foundry machines with turn of half mould with squeezing. Design and dimensions

GOST 20158-74: Pattern plates with deep changeable wooden inserts for moulding box having inside dimensions 800x700 mm for moulding foundry machines with turn of half mould with squeezing. Design and dimensions

GOST 20159-74: Pattern plates with changeable wooden inserts for moulding box having inside dimensions 100x800 mm for moulding foundry machines with turn of half mould with squeezing. Design and dimensions

GOST 20160-74: Pattern plates with deep changeable wooden inserts for moulding box having inside dimensions 800x700 mm for moulding foundry machines with turn of half mould without squeezing. Design and dimensions

GOST 20161-74: Pattern plates with changeable wooden inserts for moulding box having inside dimensions 1000x800 mm for moulding foundry machines with turn of half mould without squeezing. Design and dimensions

GOST 20365-74: Broaches round of variable cutting of diameters from 14 to 90 mm. Design and dimensions

GOST 20539-75: End mills with solid carbide tips and with spiral carbide blades. Specifications

GOST 20680-2002: Mechanical mixing devices (agitated vessels). General specifications

GOST 20761-96: Flange couplings. Parameters, design and dimensions

GOST 21028-75: Jigs for machining holes of moulding boxes and pattern plates. Specifications

GOST 21424-93: Flexible couplings with rubber-bushed studs. Parameters and dimensions

GOST 22229-83: Ceramic through insulators for voltage over 1000 V. General specifications

GOST 2287-88: Flat thread chasers

GOST 23106-78: Longitudinal screw cap couplings. Basic parameters. Design and dimensions

GOST 23289-2016: Waste water drain sanitary accessories. Specification

GOST 23289-94: Waste water drain sanitary accessories. Specifications

GOST 23476-79: Tramway and trolleybus overhead trolley wire supporting devices. General specifications

GOST 23639-79: Additive KP

GOST 24184-80: flanges on two tension hoops Design and basic dimensions

GOST 24200-80: Plug cocks. Design

GOST 2424-83: Grinding wheels

GOST 24303-80: Kitchen cookware, made of the ferrous and nonferrous metals

GOST 24360-2016: Shell and mills with inserted carbide teeth. Specifications

GOST 24360-80: Shell-type face mills with inserted carbide teeth

GOST 24379.0-2012: Foundation bolts. General specifications

GOST 24379.0-80: Foundation bolts. General specification

GOST 2464-82: Grinding segments

GOST 25021-93: Disk flexible couplings. Parameters and dimensions

GOST 25056-81: Cast deck and ship hawses. Specifications

GOST 25106-82: Plain bearing housings one-piece and sectional

GOST 25781-2018: Steel molds for the manufacture of reinforced concrete products. Technical specifications

GOST 25781-83: Steel moulds for reinforced concrete members. Specifications

GOST 26258-87: Counterbores designed for working bearing surfaces under fastenings. Specifications

GOST 26358-84: Pig iron castings

GOST 26546-85: Chain variators. General specifications

GOST 26584-85: Motorcycle helmets

GOST 26596-2016: Face milling cutters with mechanically clamped indexable carbide inserts. Specifications

GOST 26596-91: Non-adjustable milling cutters

GOST 26613-2016: Lathe tools with mechanically clamped changeable indexable inserts. Specifications

GOST 26613-85: Lathe tools with mechanic fastening of replaceable faceted plates

GOST 26665-91: Metal bodied planes. Technical specifications

GOST 26665-97: Metal bodies planes. Specification

GOST 26957-86: Variator with wide angle belt pulleys. General specifications

GOST 26957-97: Variators with wide-angle belt pulleys. General specifications

GOST 27962-88: Industrial equipment

GOST 28084-89: Low-freezing cooling liquids. General specifications.

GOST 28408-89: Manual hoists and trolleys. General specifications

GOST 28433-90: Retrievers

GOST 28434-90: Overhead travelling stacker cranes

GOST 28436-90: End mills with mechanically clamped insrtr tips

GOST 28438-90: Disk milling cutters with mechanically clamped many-sided hard-alloy inserts

GOST 28709-90: Helical end mills with elongated body and hard-alloyed change inserts

GOST 28924-91: Grinding materials. Test methods of physical and physical-mechanical properties

GOST 29166-91: Mechanical attractions. Steel structures. Principal rules of the design

GOST 30176-95: Portable gas-turbine compressor stations of general purpose. General technical requirements

GOST 30430-96: Arc welding of structural cast irons. Requirements for technological process

GOST 30466-98: Household kitchen appliances with external warmth supply. Safety requirements and test methods

GOST 30496-97: Emergency stop valves for pneumatic systems of railway rolling stock brake equipment. General specifications

GOST 30676-2000: Circular grinding machines. Flanges for mounting of grinding wheels. Construction and dimensions

GOST 30685-2000: Honing and lapping vertical machines. General specifications

GOST 30735-2001: Heating hot-water boilers with capacity from 0,1 to 4,0 MW. General specifications

GOST 30765-2001: Metal transport packagings. General specifications

GOST 31.0101.01-89: Hand wheels, rotating levers, handles, and knobs

GOST 31.0151.01-90: Universal and special-purpose setters

GOST 31.0171.01-91: Devices for metal cutting machine tools. Parts and assembly units of general application. General technical requirements

GOST 31311-2005: Heating devices. General specifications

GOST 31402-2009: Brake cylinders for railway rolling stock. General specifications

GOST 31402-2013: Brake cylinders for railway rolling stock. General specifications

GOST 31832-2012: Well sucker rod pump drives. General technical requirements

GOST 31846-2012: Special Rolling Stock. Requirements for Bearing Structure Strength and for Dynamic Properties

GOST 32601-2013: Centrifugal pumps for petroleum, petrochemical and natural gas industries. General technical requirements

GOST 32601-2022: Centrifugal pumps for oil, petrochemical and gas industry. General technical requirements

GOST 32623-2014: Automatic tensioning devices of overhead contact line of railway. General specifications

GOST 32955-2014: Public roads. Trays for road drainage. Technical specifications

GOST 33008-2014: Fireplaces, fireplace inserts, for solid fuels. Requirements and methods of testing

GOST 33009.1-2014: Gas boilers of central heating. Part 1. Specifications and test methods.

GOST 33011-2014: Gas boilers of central heating. Boilers type c with a nominal heat output of more than 70 kW but not more than 1000 kW. Classification, requirements, test methods and labeling

GOST 33013-2014: Room heaters, working on solid fuel. Requirements and test methods

GOST 33014-2014: Heating boilers for solid fuels. Requirements and methods of testing

GOST 33015-2014: Heating Boilers for solid fuel nominal thermal power up to 50 kW. Requirements and methods of testing

GOST 33016-2014: Boilers for solid fuel with manual and automatic loading of the rated capacity of up to 500 kW. Terminology, requirements, test methods and labeling

GOST 33152-2014: Public roads. Classification of tunnels

GOST 33259-2015: Flanges for valves, fittings and pipelines for pressure to PN 250. Design, dimensions and general technical requirements

GOST 33260-2015: Pipeline valves. Мetals used in pipeline valves production. Basic requirements for choice of materials

GOST 33341-2015: All-season antifreeze compositions and liquid coolants for heat-exchange systems. Specifications

GOST 3449-84: Taps. Specifications

GOST 34503-2018: Wedges friction trolleys of freight cars. General specifications

GOST 34504-2018: Automotive vehicles. Jacks are mechanical. Technical requirements and test methods

GOST 34697-2020: End and release valves. General specifications

GOST 356-80: Valves and details for piping. Pressures conditional, test and operational. Lines.

GOST 3634-2019: Manholes for manholes and storm water inlets for stormwater wells. Technical specifications

GOST 3634-89: Access manhole covers and storm-flow Receivers for manholes Technical requirements

GOST 3634-99: Access manhole covers and storm-flow Receivers for manholes Technical requirements

GOST 3726-67: Accessories for vertical cylindrical storage tank for petroleum products. Siphon taps

GOST 5151-79: Wooden drums for electrical cables and wires. Specifications

GOST 5260-75: Cast iron handwheels for pipeline armature. Types, basic dimensions and technical requirements

GOST 5332-75: Rollers and spacings of roll tables of rolling mills. General specifications

GOST 5525-88: Cast-iron connecting parts for pipelines manufactured by casting into sandy moulds

GOST 5688-2015: Tools with carbide tips. Specifications

GOST 5688-61: Tools with carbide tips. Specifications

GOST 5808-77: Half-side and side-and-face milling cutters with inserted carbide blades. Techical specifications

GOST 6127-52: Bath valves. Technical requirements

GOST 6243-75: Emulsols and pastes. Test methods

GOST 6247-79: Steel welded barrels with rolling hoops on the shell

GOST 6396-78: Carbide-tipped keyway milling cutters. Specifications

GOST 6942.0-80: Cast iron waste pipes and fittings. General specifications

GOST 6942-98: Cast iron waste pipes and fittings Specifications

GOST 7075-80: Manual Traveling Underrunning Cranes Specifications

GOST 7090-72: Single-rotor hammer crushers

GOST 7328-82: General-purpose and reference mass gages

GOST 7370-86: Railway frogs of types R75, R65 and R50

GOST 7370-98: Railroad frogs of P75, P65 and P50 types. Specifications

GOST 7413-80: Bridge overhead traveling cranes, single-girder suspension, general purpose. Specification

GOST 7890-84: Travelling single-girder suspended cranes. Specifications

GOST 8026-92: Levelling rules. Specifications

GOST 8220-85: Underground fire hydrants. Specifications

GOST 8591-76: The telephone canalization cable man-hole hatches

GOST 8690-94: Cast iron heating radiators. Specifications

GOST 8802-78: Passenger tram-cars. Specifications

GOST 8870-79: Water heaters for baths. Specifications

GOST 9.402-80: Metal surface preparation for painting

GOST 9227-85: Conveyer shot casting barrels of periodic operation

GOST 9321-73: Rollers. Specifications

GOST 9515-81: Piston metal rings for piston compressors. Specifications

GOST IEC 62841-2-1-2019: Electric, manual, portable and garden machines. Safety and test methods. Part 2-1. Particular requirements for manual drilling and hammer drilling machines

GOST R 50577-2018: Licence plates for vehicles. Types and main sizes. Technical requirements

GOST R 50577-93: Licence plates for vehicles. Types and main sizes. Technical requirements

GOST R 50641-94: Grooved pulleys for classical and narrow V-belts. System based on datum width

GOST R 50892-96: Elastic couplings with a toroid-shape shell. Specifications

GOST R 51382-2011: Heating boilers. Part 4. Heating boilers with forced draught burners. Special requirements for boilers with forced draught oil burners with output up to 70 kW and maximum operating pressure of 0,3 MPa. Terminology, special requirements, test methods and marking

GOST R 51681-2000: Pneumatic hammer drills. Drill steels. General technical requirements

GOST R 51763-2001: Well sucker rod pump drives. General technical requirements

GOST R 52116-2003: Utensils of cast-iron. General specifications

GOST R 52133-2003: Fireplaces for residential and public buildings. General specifications

GOST R 52209-2004: Hose assemblies for gas burners and gas appliances. General technical requirements and test methods

GOST R 52283-2004: Fire-fighting centrifugal pumps. General technical requirements. Test methods

GOST R 52338-2005: Industrial cleanliness. Methods for lubricating and cooling liquids testing

GOST R 52392-2005: Brake cylinders for railway rolling stock. General specifications

GOST R 53004-2008: T-slot cutters. Specifications

GOST R 53278-2009: Fire equipment. Fire valves. General technical requirements. Test methods

GOST R 53337-2009: Special rolling stock. Requirements for bearing structure stength and for dynamic properties

GOST R 53678-2009: Petroleum and natural gas industries. Materials for use in H2S-containing environments in oil and gas production. Part 2. Cracking-resistant carbon and low-alloy steels and the use of cast irons

GOST R 53808-2010: Automobile engines. Camshafts. Technical requirements and test methods

GOST R 53809-2010: Automobile engines. Cylinder liners. Technical requirements and test methods

GOST R 53822-2010: Vehicles. Hydraulic jacks. Technical requirements and test methods

GOST R 54432-2011: Flanges for valves, fittings, and pipelines for pressure from PN 1 to PN 200. Design, dimensions and general technical requirements

GOST R 54440-2011: Heating boilers. Part 1. Heating boilers with forced draught burners. Terminology, general requirements, test and marking

GOST R 54826-2011: Gas-fired central heating boilers. Type C boilers of nominal heat input not exceeding 70 kW

GOST R 54829-2011: Heating boilers with forced draught burners, with nominal heat output not exceeding 10 MW and maximum operating temperature of 150 °C

GOST R 55018-2012: Pipeline valves for objects of energetics. General specifications

GOST R 55509-2013: Pipeline valves. Metals used in pipeline valves production. Basic requirements for choice of materials

GOST R 55682.2-2017: Water-tube boilers and auxiliary installations. Part 2. Materials for pressure parts of boilers and accessories

GOST R 55853-2013: Medium speed roller mill. Types, critical parameters, specification

GOST R 55990-2014: Oil and gas-oil fields. Field pipelines. Design codes

GOST R 57054-2016: Mining equipment. Tubing cast iron. Sets of tubing rings. General specifications

GOST R 57992-2017: Trunk pipeline transport of oil and oil products. Cast iron ballast units. General specifications

GOST R 58728-2019: Dumbbells sports variable and constant weight. Technical specifications

GOST R 58933-2020: Ring metal dowels for wooden structures. Specifications

GOST R 58934-2020: Plants for the manufacture of reinforced concrete volume blocks of sanitary cabins and elevator shafts. Specifications

GOST R 70532-2022: Cutters with tungsten carbide inserts for machining T-slots. Specifications

GOST R 70533-2022: Key cutters equipped with tungsten carbide plates. Specifications

IM 14-12-2004: Automation. Instruments for measuring and regulating pressure and vacuum. Nomenclature directory

IM 14-4-2004: Automation. Instruments for measuring and controlling flow and quantity. Directory

Manual: Manual for impulse and low consumption fire extinguishing systems

NPB 154-2000: Fire machinery. Fire hydrants valves. Specifications for fire safety. Test methods.

OST 108.033.01-86: mechanical stokers. Technical conditions.

OST 108.962.01-85: Cast iron castings for steam stationary turbines. General specifications.

OST 24.090.39-78: Shell stacker cranes. Specifications.

OST 24.125.170-01: Details and prefabricated units of supports, hangers, ties for lens compensators and drives for remote control of pipe fittings in thermal and nuclear power plants. General Specifications.

OST 24.201.03-90: Steel high-pressure vessels and devices. General technical requirements.

OST 24.838.14-73: Ash gate for stationary steam boilers. Design and dimensions.

OST 24.838.15-73: Slag gate for stationary steam boilers. Design and dimensions.

OST 24.895.03: Wedge jacks, mechanical and hydraulic. Parameters, basic dimensions, technical requirements

OST 26.260.01-2001: Steel enamel vessels and devices. General technical specifications.

OST 26.260.18-2004: Process modules for oil and gas industry. General technical specifications

OST 26-01-147-89: Drying devices with rotating drums. General technical requirements.Printing telegraph and terminals for document electric communication. Methods of printed character parameter measurement.

OST 26-07-1232-87: General engineering pipeline fittings. Running thread pairs. Main dimensions. Technical requirements.

OST 34 023-74: Winches special electric gantry hook cranes. Parameters and dimensions. Technical requirements

OST 95 227-92: Non-standardized products of general machine-building applications. General technical requirements.

PB 03-108-96: Process pipeline design and safe operation rules

PB 03-576-03: Regulations of design and safe operation of pressure vessels

PB 03-75-94: Rules for arrangement and safe operation of steam and hot water piping

PB 10-115-96: Regulations of design and safe operation of pressure vessels

PB 10-14-92: Codes for installation and safe operation of lifting cranes

PB 10-157-97: Installation and Safe Operation Requirements for Pipe-Laying Machine Safety

PB 10-256-98: Regulations on design and safe operation of hoists (derricks)

PB 10-257-98: Rules for the installation and safe operation of crane manipulators

PB 10-573-03: Series 17. Supervision documents in power industry. Issue 46. Construction and safe operation of steam and hot water pipelines rules.

PB 10-574-03: Safety Operation and Design Codes for Steam and Hot Water Boilers

RD 059/01-2019: Instructions for welding and surfacing during the repair of freight cars (with Amendment No. 1)

RD 10-69-94: Typical technological process of installation electrical equipment. Main provisions.

RD 153-34.0-04.185-2003: Machines and equipment for construction, technical re-equipment and repair of energy facilities. Requirements for design, materials, manufacturing, acceptance and testing

RD 22-207-88: Lifting machines. General requirements and production standards

RD 24.207.01-90: Piping fittings. Water-flap average life time dependence on specific pressure on the sealing surface

RD 26-02-80-2004: The leading document. Welded coils for pipe furnaces. Requirements to design, production and delivery.

RD 26-11-87: Instructions on acoustic methods for monitoring the structure and mechanical characteristics of gray and high-strength cast irons

RD 302-07-22-93: Pipe fittings. Packing glands. Construction and main dimensions. Technical requirements

RD 31.28.09-93: Ship bearing bushes with antifriction layer of tin and lead alloy. Technical requirements on materials. Typical technological processes.

RD 31.31.55-93: Instruction on designing the marine jetty and coast-protecting structures

RD 31.55.08.01-89: Iron casting. Materials charge and auxiliary. Consumption rates

RD 32 TsV 052-2005: Repair of freight car trucks

RD 34 02.028-2007: Technical rules. Mechanical equipment and special steel structures for hydraulic structures. Manufacturing, installation and acceptance.

RD 34.17.435-95: Methodological instructions. Technical diagnostics of boilers with working pressure up to 4.0 MPa inclusive.

RD 34.26.203: Guidelines for Brick Lining Work During Installation of Boiler Plants and Energy Facilities

RD 34.26.601: Guidelines for Repair of Brickwork of Steam Boilers at Electric Power Generating Stations

RD 34.39.201: Guidelines for Installation of Steam and Water Piping Systems in Thermal Power Stations

RD 34.41.601: Guide to Overhaul of Mud Pumps

RD 36-62-00: Hoisting equipment. General technical requirements.

RD 39-132-94: Regulations for Operation, Inspection, Repair and Rejection of the Field Pipelines 1994

Resolution: Rules for the design and safe operation of steam and hot water boilers

RMD 32-24-2015 Sankt-Peterburg: Design of artificial structures at transport facilities in St. Petersburg

RST RSFSR 678-82: Cast-iron stoves. General technical conditions

RTM 24.090.33-77: Lift-and-carry machines. Worm gears. Strength calculation methods

RTM 26-07-187-75: Casting of parts of pipe fittings of radius of curvature and casting transitions. Wall thickness

RTM 3-1947-91: Design standards. Metals and alloys. Hardness Conversion Tables.

SA 03-005-07: Industrial pipelines of oil-refining, petrochemical and chemical industry. Requirements to configuration and operation

SN 527-80: Instructions on Designing of Steel Process Piping, Рnom up to 10 MPa

SP 120.13330.2012: Subway systems

SP 122.13330.2012: Railway and highway tunnels

SP 122.13330.2023: Railroad and road tunnels

SP 284.1325800.2016: Instructions for design, construction and redesign of field oil and gas pipelines

SP 287.1325800.2016: Marine berthing facilities. Rules of design and construction

SP 32-105-2004: Subways

SP 41-101-95: Designing heat supply stations (to the SNiP 2.04.07-86)

SP 42-101-2003: The general provision and construction gas distribution sistem from steel and polyethyelene pipes

ST RK 986-2003: Road transport. State registration number plates with a retroreflective surface for motor vehicles and their trailers. Technical specifications

ST TsKBA 005.1-2003: Pipe fittings. Metals used in the valve industry. Part 1. Basic requirements for the choice of materials

ST TsKBA 005.3-2004: Pipe fittings. Metals used in the valve industry. Part 3. Foreign materials and their domestic counterparts

ST TsKBA 005.3-2009: Pipe fittings. Metals used in the valve industry. Part 3. Foreign materials and their domestic counterparts

ST TsKBA 037-2006: Pipe fittings. Packing glands. Construction, main dimensions and technical requirements

ST TsKBA 050-2008: Pipe fittings. Castings from cast iron. Technical requirements

ST TsKBA 060-2008: Pipe fittings. Running threaded pairs. Main dimensions, technical requirements

TsRB-278: Rules for the Construction and Safe Operation of Cranes (Machines)

TU 24-09-613-84: Electric overhead traveling cranes with a lifting capacity of 5 tons of lightweight construction with electric hoist

TU 26-14-99-91: DP-10M smoke exhauster. Technical conditions

TU 34-38-20111-96: Centrifugal pump TsN-400-105-U4 (3B-200x2). Technical conditions for repair

TU 34-38-20140-94: Valves of gas pipelines TPP. General technical conditions for major repairs

TU 34-38-20190-94: Burner, types pulverized steam stationary boilers. Technical conditions for major repairs

TU 34-38-20191-94: Headset stationary boilers. General technical conditions for major repairs

TU 34-38-20197-94: Valves for steam and water DN 10, 20, 40, 50, 65 mm Chekhov factory of power engineering. Technical conditions for major repairs

TU 34-38-20310-96: Centrifugal multistage sectional pumps CNS 180-85 ... 425. Technical conditions for repair

TU 34-38-20365-94: Power valves. General technical conditions for major repairs

TU 34-38-20395-95: Fans VDN-32B, VDN-28, VDN-26, VDN-24, VDN-22, VDN-20, VDN-18. Technical conditions for major repairs

Customers Who Viewed This Item Also Viewed:

imgalt imgalt
State system for ensuring the uniformity of measurements. Measurements of liquids and gases flow rate and quantity by means of orifice instruments. Part 5. Measurement procedure
Language: English
Price: $634.00
imgalt
Petroleum products. Method for measurement of viscosity by automatic capillar viscosimeter
Language: English
Price: $87.00
imgalt
Greases. Method for determination of ultimate strength and thermostrengthening
Language: English
Price: $71.00
imgalt
Electric heating devices for heating rolling stock railways. Safety requirements and test methods
Language: English
Price: $139.00
imgalt
Ice cream. General technical requirements
Language: English
Price: $162.60
imgalt
Pipe fittings. Ball valves made of brass. General specifications
Language: English
Price: $398.00
imgalt

YOUR ORDERING MADE EASY!

RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.

Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.

We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.

Placing Your Order

Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).

Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.

For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.

For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.

Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.

Your Order Best Quality and Authenticity Guarantee

Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).

We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.

We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.

All Codes and Regulations

All Categories

Send us a message Expand Collapse

Leave your message in the form below, and we will write back by e-mail!