RD 03-421-01
РД 03-421-01
|
|
Guidelines for the diagnosis of the technical condition and the determination of the residual service life of vessels and apparatus
Методические указания по проведению диагностирования технического состояния и определению остаточного срока службы сосудов и аппаратов
Status: Effective
Guidelines apply to domestic and foreign steel vessels, and devices of chemical, petrochemical, oil refining and other industries.
Методические указания распространяются на отечественные и зарубежные стальные сосуды, и аппараты химической, нефтехимической, нефтеперерабатывающей и других отраслей промышленности.
Choose Language:
Format: Electronic (pdf/doc)
Approved: Gosgortekhnadzor of Russia,
9/6/2001
SKU: RUSS163785
The Product is Contained in the Following Classifiers:
Construction (Max) »
Regulations »
Regulatory documents of supervisory authorities »
Regulatory documents of Gosgortekhnadzor »
Welding regulations »
Welding work »
Welding regulations »
Main materials »
Welding regulations »
Pipelines »
Welding regulations »
Welding staff »
Welding regulations »
Certification »
Welding regulations »
Documentation »
Welding regulations »
Non-destructive control »
Welding regulations »
Mechanical Testing »
Welding regulations »
Defects »
Welding regulations »
Welding work »
Surfacing »
Welding regulations »
Welding work »
Dusting »
Welding regulations »
Main materials »
Steel, cast iron »
Technical Supervision »
Section I. Technological, construction, energy supervision and environmental protection regarding limitation of negative anthropogenic impact »
IV. Regulatory legal acts and regulations »
2. Industrial safety »
2.1. Common to various hazardous production facilities »
PromExpert »
SECTION IV. INDUSTRIAL SAFETY »
I Industrial Safety Administration »
6 Requirements for organizations infield of industrial safety »
ISO classifier »
71 CHEMICAL INDUSTRY »
71.120 Equipment for chemical industry »
71.120.01 Equipment for chemical industry as a whole »
The Document References:
GOST 10145-81: Metals. Stress-rupture test method
GOST 10-88: Inside micrometers. Specifications
GOST 11150-84: Metals. Methods of tension tests at low temperatures
GOST 12.1.007-76: Noxious substances. Classification and general safety requirements
GOST 14249-89: Vessels and apparatus. Norms and methods of strength calculation
GOST 1497-84: Metals. Methods of tension test
GOST 18442-80: Non-destructive testing. Capillary methods. General requirements
GOST 21105-87: Non-destructive testing. Method of magnetic particle testing
GOST 22727-88: Rolled sheet. Ultrasonic test methods
GOST 22761-77: Metals and alloys. Brinell hardness test by static action portable hardness meters
GOST 22762-77: Metals and alloys. Yield point hardness test by ball indentation
GOST 24507-80: Non-destructive testing. Forgings from ferrous and non-ferrous metals. Ultrasonic methods of slow defection
GOST 24755-89: Vessels and apparatus. Norms and methods of strength calculation for openings reinforcement
GOST 25.506-85: Design, calculation and strength testing. Methods of mechanical testing of metals. Determination of fracture toughness characteristics under the static loading
GOST 25215-82: High-pressure vessels and apparatus. Shells and heads. Norms and methods of strength calculation
GOST 25221-82: Vessels and apparatuses. Spherical non-sided heads and bottoms. Norms and methods of strength calculation
GOST 25706-83: Magnifiers
GOST 25859-83: Steel vessels and apparatuses. Norms and methods of fatigue strength calculation under low-cyclic loads
GOST 25867-83: Vessels and apparatuses. Jacketed vessels. Norms and methods of strength calculation
GOST 26158-84: Vessels and apparatus of non-ferrous metals. Norms and methods of strength calculation. General requirements
GOST 26159-84: Cast iron vessels and apparatus. Norms and methods of strength calculation. General requirements
GOST 26202-84: Vessels and devices (standards and methods of design calculations of strength for shells and bottoms under supporting loads)
GOST 26303-84: High-pressure vessels and apparatus. Threaded studs. Methods of strength calculation
GOST 27691-88: Vessels and apparatus. Requirements for presentation of computer-performed strength calculations
GOST 2789-73: Surface roughness. Parameters and characteristics
GOST 28822-90: Automatic systems for loading and unloading see and river vessels. General technical requirements and test methods
GOST 427-75: Measuring metal rules. Basic parameters and dimensions. Specifications
GOST 6032-89: Corrosion-resistant steels and alloys. Methods for determination of intercrystalline corrosion resistance
GOST 6221-90: Industrial liquid ammonia
GOST 7268-82: Steel. Method for determination of ability to mechanical aging by impact bend testing
GOST 868-82: Internal dial gauges graduated in 0,01 mm. Specifications
GOST 9.908-85: Unified system of corrosion and ageing protection. Metals and alloys. Methods for determination of corrosion and corrosion resistance indices
GOST 9454-78: Metals. Method for testing the impact strength at the low, room and high temperature
GOST 9651-84: Metals. Methods of tension tests at elevated temperatures
GOST R 50559-93: Industrial purity. General requirements for supplying, transporting, storage and feeding of working liquids
GOST R 50599-93: Welded steel vessels and apparatus under high pressure. Non-destructive control while the manufacturing and operating
GOST R 51273-99: Vessels and apparatus. Norms and methods of strength calculation. Rated strength calculation of column type apparatus from wind loads and seismic influence
GOST R 51274-99: Vessels and Plant Equipment Column-Type Vessels Strength Calculation Standards and Methods
I3-94: Instructions for diagnosing the technical condition of tanks of liquefied gas installations
OST 108.031.08-85: Stationary boilers and steam and hot-water pipelines. Strength calculation norms. General provisions on substantiation of wall thickness.
OST 24.201.03-90: Steel high-pressure vessels and devices. General technical requirements.
OST 26-01-1298-81: Flange of vessels and apparatuses made of titanium. Types, Design and dimensions. Strength and integrity calculation procedure.
OST 26-1046-87: High-pressure vessels and devices. Norms and methods of endurance calculation.
OST 26-2043-91: Bolts, studs, nuts and washers for flanged joints. Technical requirements
OST 26-291-94: Steel welded vessels and devices. General technical requirements.
PB 03-182-98: Safety Requirements for Aboveground Storage Facilities for Liquid Ammonia
PB 03-246-98: Rules for audit of industrial safety
PB 03-273-99: Rules for qualification test of welders and welding production specialists
PB 03-384-00: Rules for design, manufacture and acceptance of steel welded vessels and apparatus
PB 09-170-97: General rules on explosion safety for explosive- and fire-hazardous chemical, petrochemical plants and oil refineries
PB 09-220-98: Installation and Safe Operation Requirements for Ammonia-Based Refrigeration Equipment
PB 09-224-98: Safety rules for productions using inorganic acids and alkalis
PB 10-115-96: Regulations of design and safe operation of pressure vessels
PNAJe G-7-002-86: Standards for calculating the strength of equipment and pipelines of nuclear power plants
RD 03-131-97: Regulations on Arrangement and Conducting of Acoustic-Emissive Control of Vessels, Units, Boilers and Process Pipelines
RD 03-298-99: Statute on procedure for approval of industrial safety appraisal statements
RD 08-200-98: Safety rules in the oil and gas industry
RD 09-102-95: Methodological guidelines for determining the residual life of hazardous facilities, supervised by Federal Mining and Industrial Inspectorate of Russia.
RD 09-250-98: Procedure for safe repairs on chemical, petrochemical and oil hazardous production facilities
RD 10-249-98: Strength calculation norms for stationary boilers and steam and hot water pipelines.
RD 24.200.17-90: Vessels and apparatuses made of titanium. Norms and methods of strength calculation.
RD 24.200.21-91: Vessels and Apparatus. Strength Standards and Methods for Strength Analysis of Air-Floated Head Elements of Shell-and-Tube Heat Exchangers
RD 26-01-163-87: Pipe flanges and fittings made of titanium. Standards and methods of strength and tightness calculation.
RD 26-01-167-88: Heat exchangers pressure from 10 to 100 MPa. Calculation thickness of the tube sheet.
RD 26-02-62-98: Stressing calculation of vessels and apparatus components, operating in aggressive corrosive hydrogen sulphide-containing medium.
RD 26-14-88: Vessels and devices. Tenacity standards and testing. Heat exchange elements.
RD 26-15-88: Vessels and apparatus. Norms and methods of strength and tightness calculation for flanged joints.
RD 26-16-88: Vessels and Apparatus. Method for Calculation of Stresses at Connections Between Tubing and Shells and Bottoms
RD 26-6-87: Methodological instructions. Steel vessels and apparatuses. Methods of strength calculation considering displacement of edges of welded joints. Angularity and out-of-roundness of curbs.
RD 34.10.130-96: Instructions for visual and measuring control.
RD RTM 26-01-141-82: Heating Chambers of Tube and Shell Evaporators Having Unflanged Edges of Openings
RD RTM 26-01-44-78: Piping Components for Use at Pressure Above 10 to 100 MPa. Strength Standards and Calculation Methods
SNiP 3.05.05-84: Processing equipment and process pipelines
ST SEV 5206-85: Vessels and high-pressure apparatus. Flanges, caps flat and convex. Strength analysis methods
The Document is Referenced By:
DiOR 05: Methodology of diagnosing of technical condition and determining of residual life of process equipment of oil refineries and petrochemical plants
GOST R 54892-2012: Installation of air separation plants and other cryogenic equipment. General provisions
Order 498: List of questions proposed in the qualification examination for certification of experts in the field of industrial safety
RD 09-244-98: Instructions for diagnostics of technical condition of vessels, pipes and compressors, industrial ammonia refrigeration plants.
RD 14-03-2007: Guidelines for the verification of the activities of organizations operating objects of transportation of hazardous substances
RD 2082-18-2005: Technical diagnosis and design life prolongation program for cryogenic tank.
Customers Who Viewed This Item Also Viewed:
 |
Building materials. Methods for combustibility test
Language: English |
Cylindrical evolvent gears of external engagment. Strength calculation
Language: English |
Building materials spread flame test method
Language: English |
Food products, food raw materials. Method for determination of the non-steroidal anti-inflammatory drug residue content by high performance liquid chromatography – mass spectrometry
Language: English |
Steel welded vessels and apparatus. General technical conditions
Language: English |
Plywood for general use with outer layers of deciduous veneer. Specifications
Language: English |
System of Standards for Occupational Safety and Health (SSBT). Personal protective equipment for respiratory organs. Self-rescuers insulating on chemically bound or with compressed oxygen. Technical requirements. Test methods. Marking. Sampling rules
Language: English |
 |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.