RD 11-08-2008
РД 11-08-2008
|
|
Standard inspection program during state construction supervision of nuclear facilities
Типовая программа инспекции при проведении государственного строительного надзора на объектах использования атомной энергии
Status: Effective
The model program identifies the main areas of inspection and model lists of issues to be checked in these areas when conducting state construction supervision at nuclear facilities.
Типовая программа определяет основные направления инспекции и типовые перечни вопросов, подлежащих проверке по этим направлениям при проведении государственного строительного надзора на объектах использования атомной энергии.
Choose Language:
Format: Electronic (pdf/doc)
Approved: Federal Service for Ecological, Technological and Nuclear Supervision,
6/16/2008
SKU: RUSS163984
The Product is Contained in the Following Classifiers:
Construction (Max) »
Regulatory documents »
Examination, state supervision »
Technical Supervision »
Section II. State regulation of safety in use of atomic energy »
II. Normative legal and other acts of Federal Service for Ecological, Technological and Nuclear Supervision »
12. Guiding documents »
PromExpert »
SECTION IV. INDUSTRIAL SAFETY »
III Nuclear and radiation safety »
1 General requirements for nuclear and radiation safety »
PromExpert »
SECTION IV. INDUSTRIAL SAFETY »
III Nuclear and radiation safety »
3 Atomic stations »
The Document References:
Code 190-FZ: Town Planning Code of the Russian Federation
Federal Law 170-FZ: On technical inspection of vehicles and on amendments to certain legislative acts of the Russian Federation
Federal Law 191-FZ: On the entry into force of the Town Planning Code of the Russian Federation
GOST 10060.0-95: Methods for the determination of frost-resistance. General requirements
GOST 10060.1-95: Concretes, Basic Method For The Determination Of Frost-Resistance
GOST 10060.2-95: Concretes, rapid method for the determination of frost-resistance by repeated alternated freezing and thawing
GOST 10060.3-95: Concretes. Dilatometric rapid method for the determination of frost-resistance
GOST 10060.4-95: Concretes. Structure-mechanical rapid method for the determination of frost-resistance
GOST 10180-90: Concretes. Methods for strength determination using reference specimens
GOST 10922-90: Welded reinforcing products and inserts, welded joints of reinforcement and inserts for reinforced concrete structures. General specifications
GOST 12730.5-84: Concretes. Methods for determination of water tightness
GOST 13015-2003: Concrete and reinforced concrete products for construction. General technical requirements. Rules for acceptance, marking, transportation and storage
GOST 18105-86: Concretes. Rules for the strength control
GOST 22733-2002: Soils. Laboratory method for determination of maximum density.
GOST 23118-99: Steel construction structures
General Technical Specifications
GOST 24211-2003: Additives for concretes and mortars. General specifications
GOST 25100-95: Soils. Classification
GOST 25781-83: Steel moulds for reinforced concrete members. Specifications
GOST 26134-84: Concretes. Ultrasonic method of frost resistance determination
GOST 310.3-76: Cements. Methods of tests consistency, times of settining and of soundness
GOST 310.4-81: Cements. Methods of tests of bending and compression strengths
GOST 5686-94: Sоils. Fiеld tеst mеthоds bу рilеs
GOST 7473-94: Ready-mixed concrete. Specifications
GOST 7566-94: Metal products
GOST 8.395-80: Standard measurement conditions for calibration
GOST 8269.0-97: Mauntainous rock road-metal and gravel, industrial waste products for construction works. Methods of physical and mechanical tests
GOST 8269.1-97: Mauntainous rock road-metal and gravel, industrial waste products for construction works Methods clicmical analysis
GOST 8735-88: Sand for construction work. Testing methods
PB 10-573-03: Series 17. Supervision documents in power industry. Issue 46. Construction and safe operation of steam and hot water pipelines rules.
PNAE G-01-011-97: General Safety Regulations for nuclear thermal power plants (SSB 88/97). Also known as NP-001-97.
PNAE G-10-031-92: Basic provisions for localizing safety system elements welding on nuclear stations
PNAE G-10-032-92: Requirements for welding seal element control of nuclear plant confining safety systems
PNAE G-7-008-89: Regulations for design and safe operation of equipment and piping of atomic power plants
PNAE G-7-009-89: Equipment and pipelines of nuclear power installations. Welding and overlaying, general provisions
PNAE G-7-010-89: Equipment and pipelines of nuclear energy facilities. Welded joints and beads. Testing rules
PR 50.2.009-94: The testing and approval procedure for the measurement instrumentation
RD 03-25-2003: Typical program of inspection of the state of construction work at nuclear facilities
RD 11-02-2006: Requirements to the contents and as-built documentation for construction, reconstruction, major overhaul of capital construction facilities and the requirements applying to acts for the performed work, structures, utility network sections
RD 11-04-2006: Procedure of state construction supervision inspections and issuing certificates of conformance of built, reconstructed and repaired capital construction objects with the requirements of technical regulations (norms and standards), other statutory norms and design documents
RD 11-05-2007: Instruction On Keeping Construction Log Book
SNiP 12-01-2004: Organization of construction
SNiP 3.01.03-84: Survey operations in construction
SNiP 3.02.01-87: Earthen structures, foundation and basis
SNiP 3.03.01-87: Bearing and enclosing structures
SNiP 3.04.01-87: Insulation and finishing coatings
SNiP 3.04.03-85: Protection of construction structures and facilities from corrosion
SNiP 3.09.01-85: Precast reinforced concrete structure and work-piece production
SP 53-101-98: Manufacturing and quality control of steel structures for construction
Customers Who Viewed This Item Also Viewed:
 |
Cylindrical evolvent gears of external engagment. Strength calculation
Language: English |
Unified system for design documentation. Types and sets of design documentation
Language: English |
Loads and impacts
Language: English |
High strength rolled steel. General specification
Language: English |
Food products, food raw materials. Method for determination of the non-steroidal anti-inflammatory drug residue content by high performance liquid chromatography – mass spectrometry
Language: English |
Plywood for general use with outer layers of deciduous veneer. Specifications
Language: English |
 |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.