RD 112 RSFSR-023-89

РД 112 РСФСР-023-89

Guidelines. GSE. Capacity technological pipelines. Measurement Technique

Методические указания. ГСИ. Вместимость технологических трубопроводов. Методика выполнения измерений

Status: Not effective

Guidelines establish the procedure, rules and means of determining the size, capacity and calibration of process pipelines using the geometric method. Guidelines apply to steel process pipelines for oil and oil products, operated in accordance with RU-75

Методические указания устанавливают порядок, правила и средства определения размеров, вместимости и градуировки технологических трубопроводов геометрическим методом. Методические указания распространяются на стальные технологические трубопроводы для нефти и нефтепродуктов, эксплуатируемые в соответствии с РУ-75 «Руководящие указания по эксплуатации, ревизии, ремонту и отбраковке технологических трубопроводов под давлением до 100 кгс/см2».

Choose Language: 
Format: Electronic (pdf/doc)

Approved: Goskomnefteproduct of the RSFSR, 11/30/1989

SKU: RUSS163987

Price: $741.51


The Product is Contained in the Following Classifiers:

Construction (Max) » Regulations » Sectoral and departmental regulatory and methodological documents » Design and construction of oil and gas industry facilities »

PromExpert » SECTION II. METROLOGICAL » II Measurements » 1 Measurement of geometric quantities »

ISO classifier » 17 METROLOGY AND MEASUREMENTS. PHYSICAL PHENOMENA » 17.060 Measurements of volume, mass, density, viscosity »

ISO classifier » 75 EXTRACTION AND PROCESSING OF OIL, GAS AND RELATED PRODUCTION » 75.200 Equipment for oil refining, oil products and natural gas » 2003.200.13 Pipelines and their components »

The Document is Replaced With:

MI 2800-2003: State system of measuring uniformity provision. Capacity of technological pipelines. Methodics of measuring by geometric method

The Document References:

GOST 10392-89: Whirling and centrifugal-whirling pumps. Types and basic parameters

GOST 12.1.001-89: Occupational safety standards system. Ultrasound. General safety requirements

GOST 12893-83: Single-seated, double-seated and cage control valves.

GOST 12997-84: SSI Products. General specifications

GOST 13837-79: General purpose dynamometers

GOST 166-89: Vernier callipers. Specifications

GOST 17375-83: Seamless welded steel pipeline components for Pn £ 10 MPa (£ 100 kgf/cm2). Sharply curved offsets. Design

GOST 17376-83: Seamless welded steel pipeline components for Pn £ 10 MPa (£ 100 kgf/cm2). Tees. Design and dimensions

GOST 17378-83: Seamless welded steel pipeline components for Pn £ 10 MPa (£ 100 kgf/cm2). Reducers. Design and dimensions

GOST 18194-79: Installations for oil and oil products bottom loading unloading from railway tank cars. Technical specifications

GOST 19774-74: Grease ВНИИ НП-207. Specifications

GOST 215-73: Mercury glass laboratory thermometers. Specification

GOST 3326-86: Stop valves, check lift and swing valves. Overall dimensions

GOST 427-75: Measuring metal rules. Basic parameters and dimensions. Specifications

GOST 4609-49: Filling-draining equipment for flammable and highly inflammable liquids. Single filling-draining standpipe with manual pump

GOST 5009-82: Abrasive cloth. Specifications

GOST 5775-85: Capacitor oil

GOST 6267-74: Grease ЦИАТИМ-201. Specifications

GOST 6823-77: Crude glycerine. Specifications

GOST 7213-72: Center punches

GOST 7502-98: Measuring metal tapes. Specifications

GOST 982-80: Transformer oils

OST 26-02-2079-83: Bellows-sealed compensators. Technical conditions.

OST 26-02-225-70: Axial corrugated compensators of KBO2 type for pipelines for Pnom 25 kg/cm2, Dy 150-400 mm. Design and basic dimensions.

OST 26-02-226-70: Compensators corrugated axial KVOT type for heat exchangers with diameter 600-1400 mm, PN 16 kgf / cm2. Design and main dimensions

OST 26-02-332-71: Compensators angular corrugated of type KVU 2 for PN 25 kgf/cm2, diameter 150-400 mm. Parameters and main dimensions

OST 26-18-3-86: liquid mesh filter for piping. Design, parameters and dimensions.

SN 245-71: Sanitary standards for the design of industrial enterprises

SNiP 3.05.05-84: Processing equipment and process pipelines

SNiP II-106-79: Planning Standards. Storage facilities for petroleum and petroleum products

Customers Who Viewed This Item Also Viewed:

imgalt imgalt
Heating, Ventilation and Air Conditioning (HVAC)
Language: English
Price: $430.00
Rules of Electrical Installations Design (Russian Electrical Code). 7th Edition. All sections and exhibits
Language: English
Price: $478.76
Technical regulations of Customs Union. On safety of rolling stock
Language: English
Price: $181.30
Sponge titanium. Specifications
Language: English
Price: $79.00
Goat whole drinking milk. Specifications
Language: English
Price: $168.00
Loads and impacts
Language: English
Price: $306.00
Seamless steel pipes for steam boilers and pipelines
Language: English
Price: $581.17
Packaging. Determination of formaldehyde concentration in water and model environments
Language: English
Price: $217.00
Conformity assessment system in the field of atomic energy use. Conformity assessment in the form of control. Unified techniques. Capillary control
Language: English
Price: $226.00
Conformity assessment system in the field of atomic energy use. Conformity assessment in the form of control. Unified techniques. Visual and measuring control
Language: English
Price: $348.00
Pipe fittings. Passport. Rules for development and design
Language: English
Price: $254.00

YOUR ORDERING MADE EASY! is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.

Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.

We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.

Placing Your Order

Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).

Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.

For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.

For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.

Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.

Your Order Best Quality and Authenticity Guarantee

Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).

We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.

We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.

All Codes and Regulations

All Categories

Send us a message Expand Collapse

Leave your message in the form below, and we will write back by e-mail!