RD 13-06-2006
РД 13-06-2006
|
|
Guidelines for the procedure for capillary control of technical devices and structures used and operated at hazardous production facilities
Методические рекомендации о порядке проведения капиллярного контроля технических устройств и сооружений, применяемых и эксплуатируемых на опасных производственных объектах
Status: Effective
Guidelines set out the organization and technology of capillary control of structures and parts in the manufacture, construction, installation, repair, reconstruction, operation, technical diagnostics (inspection) of technical devices and structures used and operated at hazardous production facilities controlled by the Federal Service for Environmental, Technological and atomic surveillance.
Методические рекомендации излагают организацию и технологию капиллярного контроля конструкций и деталей при изготовлении, строительстве, монтаже, ремонте, реконструкции, эксплуатации, техническом диагностировании (освидетельствовании) технических устройств и сооружений, применяемых и эксплуатируемых на опасных производственных объектах, подконтрольных Федеральной службе по экологическому, технологическому и атомному надзору.
Choose Language:
Format: Electronic (pdf/doc)
Approved: Federal Service for Ecological, Technological and Nuclear Supervision,
12/13/2006
SKU: RUSS164024
The Product is Contained in the Following Classifiers:
Construction (Max) »
Regulations »
Regulatory documents of supervisory authorities »
Normative documents of Gosatomnadzor of Russia »
Welding regulations »
Welding work »
Welding regulations »
Main materials »
Welding regulations »
Welding materials »
Welding regulations »
welding equipment »
Welding regulations »
Admission Testing »
Welding regulations »
Certification »
Welding regulations »
Documentation »
Welding regulations »
Non-destructive control »
Welding regulations »
Heat treatment »
Welding regulations »
Defects »
Welding regulations »
Welding work »
Dusting »
Welding regulations »
Main materials »
Steel, cast iron »
Welding regulations »
Welding materials »
Gases »
Technical Supervision »
Section I. Technological, construction, energy supervision and environmental protection regarding limitation of negative anthropogenic impact »
IV. Regulatory legal acts and regulations »
2. Industrial safety »
2.1. Common to various hazardous production facilities »
PromExpert »
SECTION IV. INDUSTRIAL SAFETY »
II Industrial safety requirements for operation of a hazardous production facility »
1 General industrial safety requirements for operation of a hazardous production facility »
The Document References:
GOST 10689-75: Soda ash from nepheline raw stock for industrial use. Specifications
GOST 12.1.003-83: Noise. General safety requirements
GOST 12.1.004-91: Fire safety. General requirements
GOST 12.1.005-88: General sanitary requirements for working zone air
GOST 12.1.007-76: Noxious substances. Classification and general safety requirements
GOST 12.1.010-76: Explosion safety. General requirements
GOST 12.2.003-91: Industrial equipment. General safety requirements
GOST 12.2.007.0-75: Occupation safety standards system Electrical equipment. General safety requirements
GOST 12.2.007.14-75: Cables and cable fittings. Safety requirements
GOST 12.3.002-75: Occupational safety standards system. Manufacturing processes. General safety requirements
GOST 12.4.011-89: Occupational safety standards system. Means of protection. General requirements and classification
GOST 12.4.016-83: Occupational safety standards system. Special protective clothes. Nomenclature of quality indexes
GOST 12.4.020-82: Occupational safety standards safety. Means for personal protection of hands. Nomenclature of quality indices
GOST 12.4.021-75: Ventilation systems. General requirements
GOST 1571-82: Turpentine oil
GOST 17299-78: Technical ethyl alcohol. Specifications
GOST 18300-87: Technical rectified ethyl alcohol. Specifications
GOST 18442-80: Non-destructive testing. Capillary methods. General requirements
GOST 19608-84: Concentrated kaolin for rubber-industrial and plastic products, artificial leather and cloth. Specifications
GOST 21285-75: Caoline concentrated for perfume industry. Specifications
GOST 2424-83: Grinding wheels
GOST 2603-79: Reagents. Acetone. Specifications
GOST 2789-73: Surface roughness. Parameters and characteristics
GOST 28369-89: Non-destructive testing. Ultra-violet irradiators
GOST 3-88: Surgical rubber gloves
GOST 5949-75: Gauged corrosion-resistant, heat-resistant and high-temperature steel shape
GOST 5962-67: Rectified ethyl alcohol. Specifications
GOST 83-79: Reagents. Sodium carbonate. Specifications
GOST 8505-80: Nefras-C 50/170. Specifications
GOST 9411-91: Colored optical glass
GOST 9412-77: Medical gauze. Specifications
GOST 9412-93: Medical gauze
GOST 982-80: Transformer oils
GOST 9949-76: Coal xylene. Specifications
GOST R 12.4.013-97: Occupational safety standards system. Goggles. General specifications
PB 03-372-00: Non-destructive test laboratory certification rules and main requirements.
PB 03-428-02: Safety Requirements for Construction of Underground Structures
PB 03-440-02: Attestation rules for nondestructive inspection personnel
PB 03-498-02: Uniform Safety Requirements for Underground Development of Mineral Deposits Using Opencast Method
PB 11-493-02: General safety rules for metallurgical and by-product-coke plants and manufactures
POT R M-016-2001: Inter-Industry Occupational Safety and Health Regulations (Safety Regulations) for Operation of Electrical Installations
RD 03-484-02: Provisions on aplliances, equipment and construction safe operation life extension at hazardous manufacturing entities.
RD 03-606-03: Instructions for visual and measuring control
SNiP 12-03-2001: Labor safety in construction industry
SNiP 12-04-2002: Safety in construction. Part 2. Construction works
The Document is Referenced By:
Order 498: List of questions proposed in the qualification examination for certification of experts in the field of industrial safety
SDOS-07-2012: Methodological recommendations on the procedure for tightness control of technical devices and structures used and operated at hazardous production facilities
ST TsKBA 045-2009: Pipe fittings. Welding and surfacing of parts made of titanium and titanium alloys. Technical requirements and quality control
ST TsKBA 052-2008: Pipe fittings. Requirements for materials of fittings used for hydrogen sulfide environments
ST TsKBA 088-2010: Pipe fittings. The quality control program of valves used for hydrogen sulfide environments
Customers Who Viewed This Item Also Viewed:
|
Limit dimension deviation from 0,1 to 10000 mm and surface shape and arrangement allowances, not specified on drawings.
Language: English |
Rules of development, coordination, approval and composition of technical and economic assessment for construction
Language: English |
Mineral fertilizers. Method for determination of dynamic strength and attrition
Language: English |
Diesel fuel EURO. Specifications
Language: English |
Inch thread with a profile angle of 55 degrees
Language: English |
Vessels and apparatus. Norms and methods of strength calculation. General requirements
Language: English |
Norms of structural design of nuclear power plants with reactors of different types
Language: English |
|
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.