RD 153-34.0-04.185-2003
РД 153-34.0-04.185-2003
|
|
Machines and equipment for construction, technical re-equipment and repair of energy facilities. Requirements for design, materials, manufacturing, acceptance and testing
Машины и оборудование для строительства, технического перевооружения и ремонта объектов энергетики. Требования к проектированию, материалам, изготовлению, приемке и испытанию
Status: Effective
RD applies to machinery and equipment designed, manufactured, upgraded for the construction and repair of electric power facilities located in areas with a temperate climate. RD establishes requirements for the design, materials, manufacture, quality, acceptance and testing of products in accordance with applicable standards and other regulatory and technical documents, ensuring a high level of product quality.
РД распространяется на машины и оборудование, проектируемые, изготавливаемые, модернизируемые для строительства и ремонта объектов электроэнергетики, расположенных в районах с умеренным климатом. РД устанавливает требования к проектированию, материалам, изготовлению, качеству, приемке и испытанию изделий согласно действующим стандартам и другим нормативно-техническим документам, обеспечивающим высокий уровень качества продукции.
Choose Language:
Format: Electronic (pdf/doc)
Approved: RAO UES of Russia,
2/18/2003
SKU: RUSS164087
The Product is Contained in the Following Classifiers:
Power industry »
04. Organization of energy production »
Construction (Max) »
Regulations »
Regulatory documents of supervisory authorities »
Regulatory documents of State Energy Supervision »
Welding regulations »
Welding work »
Welding regulations »
Main materials »
Welding regulations »
Pipelines »
Welding regulations »
Metal structures »
Welding regulations »
Welding materials »
Welding regulations »
Admission Testing »
Welding regulations »
Documentation »
Welding regulations »
Non-destructive control »
Welding regulations »
Mechanical Testing »
Welding regulations »
Heat treatment »
Welding regulations »
Defects »
Welding regulations »
Assembly devices »
Welding regulations »
Welding work »
Automatic welding »
Welding regulations »
Welding work »
Surfacing »
Welding regulations »
Welding work »
Dusting »
Welding regulations »
Main materials »
Steel, cast iron »
Welding regulations »
Main materials »
Non-ferrous metals »
Welding regulations »
Welding materials »
Electrodes »
Welding regulations »
Welding materials »
Fluxes »
PromExpert »
SECTION I. TECHNICAL REGULATION »
V Testing and control »
4 Testing and control of products »
4.13 Testing and control of products of engineering industry »
4.13.2 Machines and equipment for special purposes »
4.13.2.7 Machines and equipment for construction industry »
The Document References:
GOST 5264-80: Manual arc welding. Welding joints. Main types, design elements and dimensions
GOST 10198-91: Wooden boxes for weights of mass over 200 up to 20000 kg. General specifications
GOST 1033-79: Fatty cup grease. Specifications
GOST 10362-76: Pressure hoses of vulcanized rubber with thread reinforcement and without end fitting. Specifications
GOST 1050-88: Carbon structural quality steel gauged bars with special surface finish. General specifications
GOST 10791-89: Solid rolled wheels
GOST 11284-75: Through holes for fasteners. Dimensions
GOST 1139-58: Basic norms of interchangeability. Straight-sided splines. Dimensions and tolerances
GOST 1139-80: Basic norms of interchangeability. Straight-sided splined joints. Dimensions and tolerances
GOST 11534-75: Hand arc welding. Acute and blunt weld joints. Main types, design elements and dimensions
GOST 12.1.001-89: Occupational safety standards system. Ultrasound. General safety requirements
GOST 12.1.002-84: Occupational safety standards system. Power frequency electric fields. Permissible levels of field strength and requirements for control at work-places
GOST 12.1.003-83: Noise. General safety requirements
GOST 12.1.004-91: Fire safety. General requirements
GOST 12.1.005-88: General sanitary requirements for working zone air
GOST 12.1.012-90: SSBT. Occupational Safety Standards System. Vibrational safety. General requirements
GOST 12.1.030-81: Electrical safety protective grounding, neutral grounding
GOST 12.1.038-82: Occupational safety standards system. Electric safety. Maximum permissible values of pick-up voltages and currents
GOST 12.2.007.4-75: Cabinets for switchgear and control gear and unitized transformer substations
GOST 12.3.001-85: System of labor safety standards pneumatic drives
GOST 12.3.002-75: Occupational safety standards system. Manufacturing processes. General safety requirements
GOST 12.3.004-75: Occupational safety standards system. Heat treatment of metals. General safety requirements
GOST 12.3.005-75: Painting works
GOST 12.3.009-76: Occupational safety standards system. Loading and unloading works General safety requirements
GOST 12.3.020-80: Occupational safety standards system. Transporting process of loads in all fields of national economy. General requirements safety
GOST 12.3.025-80: Occupational safety standards system. Metal working by cutting. Safety requirements
GOST 12.3.026-81: Occupational safety standards system. Forge-pressing. Safety requirements
GOST 12.3.027-92: Foundry work
GOST 12.3.032-84: Occupational safety standards system. Electric installation works. General safety requirements
GOST 1215-79: Malleable iron castings
GOST 12840-80: Safety locks for single hooks. Type and dimensions
GOST 12969-67: Plates for machines and devices. Technical requirements
GOST 12970-67: Round plates for machines and devices. Dimensions
GOST 12971-67: Rectangular plates for machines and devices. Dimensions
GOST 13556-91: Building tower pillars building tower pillars
GOST 13754-81: Basic requirements for interchangeability. Gearings conical with straight gears. Basic rack
GOST 13755-81: Basic requirements for interchangeability. Gearings cylindrical evolvent gears. Basic rack
GOST 13765-86: Cylindrical helical compression (tension) springs made of round steel. Designation of parameters, methods for determination of dimensions
GOST 13775-86: Cylindrical helical compression springs of III class and of 2 category made of round steel. Main parameters of coils
GOST 13776-86: Cylindrical helical compression springs of III class and of 3 category made of round steel. Main parameters of coils
GOST 1412-85: Flakish graphite cast iron
GOST 14192-96: Cargo marking
GOST 14771-76: Gas-shielded arc welding. Welded joints. Main types, design elements and dimensions
GOST 14782-86: Nondestructive testing. Welded joints. Ultrasonic methods
GOST 14896-84: Rubber u-packing seals for hydraulic devices
GOST 14959-79: Spring carbon and alloy steel bars. Specifications
GOST 15150-69: Machines, instruments and other industrial products. Modifications for different climatic regions. Categories, operating, storage and transportation conditions as to environment climatic aspects influence
GOST 1525-91: Rods of monel. Specifications
GOST 1583-89: Aluminium casting alloys. Specifications
GOST 1583-93: Aluminium casting alloys. Specifications
GOST 1585-85: Bearing cast iron for molding
GOST 16037-80: Welded joints in steel pipelines. Main types, design elements and dimensions
GOST 16093-81: Basic norms of interchangebility. Metric screw thread. Tolerances. Clearance fits
GOST 16118-70: Cylindrical helical compression (extension) springs made of round steel. Specifications
GOST 1643-81: Cylindrical gears pairs. Accuracy
GOST 17216-2001: Industrial cleanliness. Grades of liquids purity
GOST 17411-91: Positive-displacement hydraulic drives
GOST 1758-81: Basic norms of interchangeability. Bevel and hypoid gears. Tolerances
GOST 1759.0-87: Bolts, screws, studs and nuts. Specifications.
GOST 1759.4-87: Bolts, screws and studs. Mechanical properties and test methods
GOST 1759.5-87: Nuts. Mechanical properties and test methods
GOST 1763-68: Steel. Methods for determination of decarbonised layer depth
GOST 18175-78: Tin-free pressure-worked bronzes. Grades
GOST 18460-91: Pneumatic drives
GOST 18698-79: Rubber delivery hoses with textile framework
GOST 18899-73: Steel wire ropes. Locked conveying wire ropes. Specifications
GOST 19151-73: Red lead. Specifications
GOST 191-82: Loading leaf chains
GOST 19200-80: Iron and steel castings. Terms and definitions of defects
GOST 19672-74: Cylindrical worm gear pairs. Modules and coefficients of worm diameter
GOST 2.601-68: Unified system for design documentation. Exploitative documents
GOST 2.601-95: Operational documents
GOST 2105-75: Forged and swaged hooks. Technical requirements
GOST 21437-95: Zinc antifriction alloys. Marks, technical requirements and test methods
GOST 21438-95: Zinc antifriction alloys in pigs. Specifications
GOST 22045-89: Overhead travelling single-beam cranes. Specifications
GOST 22061-76: Machines and technological equipment. Balance quality grade system. General
GOST 22790-89: Assembly units and pipelines components, designed for рnom over 10 to 100 MPa (from 100 to 1000 kgf/cm2)
GOST 22826-83: Assembly units and pipeline parts. Fillets for Pnom 9,81-98,1 MPa (100-1000 kgf/sm sq). Construction and dimensions
GOST 22827-85: General purpose self-propelled boom cranes
GOST 228-79: Anchor chains
GOST 23360-78: Basic norms of interchangeability. Keys couplings with prismatic Keys. Keys dimensions and Keyways sections. Limits and fits
GOST 23518-79: Cas-shielded arc welding. Welded joints. Main types, design elements and dimensions
GOST 24297-87: Input inspection of products. General provisions.
GOST 24599-87: Rope grab buckets for bulk cargoes
GOST 24634-81: Wooden boxes for export products. General specifications
GOST 24643-81: Basic norms of interchangeability. Tolerances of form and position of surfaces. Numerical values
GOST 25069-81: Basic norms of interchangeability. Unindicted tolerances of form and surface location
GOST 25288-82: Constructive plastic mosses. Quality characteristics nomenclature
GOST 25346-89: Basic norms of interchangeability. Unified system of tolerances and fits. General, series of tolerances and fundamental deviations
GOST 25347-82: Basic norms of interchangeability. Unified system of tolerances and fits. Tolerance zones and recommendable fits
GOST 25348-82: Basic norms of interchangeability. Unified system of tolerances and fits. Series of tolerances, basic deviations and tolerance zones for sizes over 3150 mm
GOST 25452-90: Unarmored high-pressure rubber hoses with metal winding
GOST 25835-83: Lifting capacity cranes. Duty classifications of mechanisms
GOST 26338-84: Threaded piping joints. Tolerances of form and position
GOST 26358-84: Pig iron castings
GOST 26645-85: Metal and alloy castings. Dimensions and mass tolerances and machining allowances.
GOST 27584-88: Electric overhead travelling cranes and gantry cranes. General specifications
GOST 2789-73: Surface roughness. Parameters and characteristics
GOST 28259-89: Voltage operations made at power plants. Main requirements
GOST 28648-90: Crane wheels
GOST 28713-90: Machines and tractors agricultural and forest potato. Harvesting machines. Methods of testing
GOST 288-72: Technical felts and machinery parts from fine wool. Specifications
GOST 2991-85: Wooden uncollapsible cases for weights up to 500 kg. General specifications
GOST 3.1125-88: Unified system for technological documentation. Rules for graphic making of elements of mould forms and castings
GOST 30321-95: Hoisting cranes. Safety requirements for hydraulic equipment
GOST 3212-92: Gated patterns. Pattern tapers, core prints, dimensional tolerances
GOST 3241-91: Steel ropes
GOST 3242-79: Welded joints
GOST 3325-85: Rolling bearings. Tolerance margins and technical requirements for shaft and housing seatings. Fits
GOST 380-88: Common quality carbon steel. Grades
GOST 380-94: Normal quality carbon steel
GOST 4113-80: Preventive composition ПП 95/5. Specifications
GOST 4543-71: Structural alloyed steel
GOST 493-79: Tin-free foundry bronzes. Grades
GOST 5006-83: Toothed clutches. Specifications
GOST 515-77: Bitumized and tarred packaging paper
GOST 591-69: Chain transmission sprocket wheels for roller chains. Methods of calculation and construction of tooth profile and cutting tool form. Tolerances
GOST 613-79: Tin foundry bronzes. Grades
GOST 6619-75: Single and double horned lamellar hooks. Specifications
GOST 6627-74: Single hooks. Blanks. Types. Construction and dimensions
GOST 6628-73: Ramshorn hooks. Blanks. Type. Construction and dimensions
GOST 6631-74: Enamels НЦ-132. Specifications
GOST 6713-91: Low-alloyed structural rolled stock for bridge building. Specifications
GOST 6996-66: Welded joints. Methods of mechanical properties determination
GOST 7062-90: Carbon and alloyed steel forgings fabricated by press forging. Allowances and tolerances
GOST 7293-85: Cast iron with globular graphite for foundry
GOST 7505-89: Steel stamping forgings. Tolerances, allowances and forging laps
GOST 7512-82: Nondestructive testing. Welded joints. Radiography method
GOST 7769-82: Alloyed cast iron for castings with special properties
GOST 7817-80: Product grade A fit bolts with hexagon reduced head. Construction and dimensions
GOST 7829-70: Carbon and alloyed steel forgings fabricated by hammer forging. Allowances and tolerances
GOST 8.417-2002: State system for ensuring the uniformity of measurements. Units of quantities
GOST 8.417-81: State system of ensuring the uniformity of measurements. Units of physical quantities
GOST 8479-70: Structural carbon and alloy steel forgings
GOST 8713-79: Flux welding. Welded joints. Maih types design elements and dimensions
GOST 8752-79: Metal insert rubber seals for rotating. Specifications
GOST 8828-89: Base paper and two-layer waterproof packaging paper
GOST 9.014-78: Unified system of corrosion and ageing protection. Temporary corrosion protection of products. General requirements
GOST 9.032-74: Unified, system of corrosion and ageing protection. Paint coatings. Groups, technical requirements and designations
GOST 9.104-79: Unified system corrosion of corrosion and ageing protection. Paint coatings. Croups of operation conditions
GOST 9.301-86: Unified system of corrosion and ageing protection. Metal and non-metal inorganic coatings. General requirements
GOST 9.302-88: Unified system of corrosion and ageing protection. Metal and non-metal inorganic coatings. Control methods
GOST 9.402-80: Metal surface preparation for painting
GOST 9012-59: Metals. Method of Brinell hardness measurement
GOST 9013-59: Metals. Method of measuring Rockwell hardness
GOST 9087-81: Welding melted fluxes
GOST 9454-78: Metals. Method for testing the impact strength at the low, room and high temperature
GOST 9467-75: Metal covered electrodes for manual arc welding of structural and heat-resistant steels. Types
GOST 977-88: Steel castings. General specifications
GOST 9833-73: Rubber toroidal sealing rings for hydraulic and pneumatic equipment. Construction and dimensions
GOST R 15.201-2000: System of product development and launching into manufacture. Products of industrial and technical designation. Procedure of product development and launching into manufacture
GOST R ISO 9001-2001: Quality management systems. Requirements
GOST R ISO 9003-96: Quality system. Model for quality assurance in final inspection and test
GOST R ISO 9004-2001: Quality management systems. Guidelines for performance improvements
PB 10-382-00: Rules of hoisting crane structure and safe operation. Series 10. Revision 7.
Customers Who Viewed This Item Also Viewed:
|
Controllers acting without
Language: English |
Building materials. Methods for combustibility test
Language: English |
Building materials spread flame test method
Language: English |
Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V. Non-sheathed cables for fixed wiring
Language: English |
Clear sheet glass. Specifications
Language: English |
Natural gas. Methods of calculation of physical properties. Calculation of physical properties on base information on density of standards conditions and nitrogen and carbon dioxide contents
Language: English |
Steel welded vessels and apparatus. General technical conditions
Language: English |
System of Standards for Occupational Safety and Health (SSBT). Personal protective equipment for respiratory organs. Self-rescuers insulating on chemically bound or with compressed oxygen. Technical requirements. Test methods. Marking. Sampling rules
Language: English |
|
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.