imgalt

RD 22-207-88

РД 22-207-88

Lifting machines. General requirements and production standards

Машины грузоподъемные. Общие требования и нормы изготовления

Status: Effective

The governing regulatory document applies to the following mass-produced lifting machines of the Minstroydormash nomenclature: 1. Construction tower cranes. 2. Self-propelled jib cranes: pneumowheel, automobile, crawler, short base and on a special chassis. 3. Portable boom cranes. 4. Manipulators for construction and on-board works. 5. Winches construction electric. RD establishes general requirements and standards for the manufacture, acceptance, testing, packaging, packaging and transportation of machines.

Руководящий нормативный документ распространяется на следующие серийно изготавливаемые грузоподъемные машины номенклатуры Минстройдормаша: 1. Краны башенные строительные. 2. Краны стреловые самоходные: пневмоколесные, автомобильные, гусеничные, коротко базовые и на специальном шасси. 3. Краны переносные стрелового типа. 4. Манипуляторы для строительно-монтажных работ и бортовые. 5. Лебедки строительные электрические. РД устанавливает общие требования и нормы на изготовление, приемку, испытания, комплектацию, упаковку и транспортирование машин

Choose Language: 
Format: Electronic (pdf/doc)

Approved: VNIISStroydormash, 6/16/1988

SKU: RUSS164297

Price: $789.00



imgalt

The Product is Contained in the Following Classifiers:

Construction (Max) » Regulations » Sectoral and departmental regulatory and methodological documents » Installation and special construction works »

PromExpert » SECTION IV. INDUSTRIAL SAFETY » II Industrial safety requirements for operation of a hazardous production facility » 2 Special industrial safety requirements for operation of a hazardous production facility » 2.7 Industrial safety requirements for hoisting facilities »

ISO classifier » 53 LIFTING AND TRANSPORT EQUIPMENT » 53.020 Lifting equipment » 53.020.20 Cranes »


The Document References:

GOST 5264-80: Manual arc welding. Welding joints. Main types, design elements and dimensions

GOST 10198-91: Wooden boxes for weights of mass over 200 up to 20000 kg. General specifications

GOST 10362-76: Pressure hoses of vulcanized rubber with thread reinforcement and without end fitting. Specifications

GOST 1050-88: Carbon structural quality steel gauged bars with special surface finish. General specifications

GOST 11533-75: Automatic and semiautomatic submerged arc welding. Acute and blunt weld joints. Main types, design elements and dimensions

GOST 11534-75: Hand arc welding. Acute and blunt weld joints. Main types, design elements and dimensions

GOST 12.1.003-83: Noise. General safety requirements

GOST 12.1.004-91: Fire safety. General requirements

GOST 12.1.005-88: General sanitary requirements for working zone air

GOST 12.1.006-84: Occupational safety standards system. Electromagnetic fields of radio frequencies. Permissible levels at work-places and requirements for control

GOST 12.1.012-2004: Occupational safety stаndards system. Vibration safety. General requirements

GOST 12.1.019-79: Occupational safety standards system. Electric safety. General requirements and nomenclature of kinds of protection

GOST 12.1.030-81: Electrical safety protective grounding, neutral grounding

GOST 12.2.007.8-75: Devices for electric welding and plasma treatment

GOST 12.2.058-81: Requirements for color of crane components dangerous in exploitation

GOST 12.2.085-82: Vessels working under pressure. Safety valves. Safety requirements

GOST 12.3.001-85: System of labor safety standards pneumatic drives

GOST 12.3.003-86: Occupational safety standards system Electric welding works. Safety requirements

GOST 12.3.009-76: Occupational safety standards system. Loading and unloading works General safety requirements

GOST 12.3.036-84: Occupational safety standards system. Flame machining of metals. Safety requirements

GOST 12.3.039-85: Occupational safety standards system. Plasma treatment of metals. Safety requirements

GOST 1215-79: Malleable iron castings

GOST 12966-85: Aluminum sulfate technical purified. Technical conditions

GOST 12969-67: Plates for machines and devices. Technical requirements

GOST 13556-91: Building tower pillars building tower pillars

GOST 13754-81: Basic requirements for interchangeability. Gearings conical with straight gears. Basic rack

GOST 13755-81: Basic requirements for interchangeability. Gearings cylindrical evolvent gears. Basic rack

GOST 13765-86: Cylindrical helical compression (tension) springs made of round steel. Designation of parameters, methods for determination of dimensions

GOST 13776-86: Cylindrical helical compression springs of III class and of 3 category made of round steel. Main parameters of coils

GOST 13823-78: Positive-displacement hydraulic drives. Positive-displacement pumps and hydraulic motors

GOST 14034-74: Centre holes. Dimensions

GOST 1412-85: Flakish graphite cast iron

GOST 14140-81: Basic norms of interchangeability. Position tolerances of bore axes for fasteners

GOST 14186-69: Novikov spur gears. Modules

GOST 14192-77: Marking of cargoes

GOST 14637-89: Thick sheet rolled stock of normal quality carbon steel

GOST 14658-86: Positive-displacement pumps for hydraulic drives

GOST 14737-69: Screw fixed sunk keys. Construction

GOST 14771-76: Gas-shielded arc welding. Welded joints. Main types, design elements and dimensions

GOST 14776-79: Arc welding. Button welds. Main types, design elements and dimensions

GOST 14782-86: Nondestructive testing. Welded joints. Ultrasonic methods

GOST 14792-80: Parts and work pieces made by oxygen and plasma arc cutting. Cut face accuracy and quality

GOST 14896-84: Rubber u-packing seals for hydraulic devices

GOST 15.001-88: System of product development and launching into manufacture. Products of industrial and technical designation

GOST 15023-76: Novikov spur gears with double line of action. Basic rack

GOST 15150-69: Machines, instruments and other industrial products. Modifications for different climatic regions. Categories, operating, storage and transportation conditions as to environment climatic aspects influence

GOST 15164-78: Electroslag welding. Welded joints. Main types, design elements and dimensions

GOST 15608-81: Pneumatic piston cylinders

GOST 15763-2005: Threaded and flange pipe connections for PN to 63 MPa (to 630 kgf/sq sm). General specifications

GOST 1585-85: Bearing cast iron for molding

GOST 15878-79: Resistance welding. Welded joints. Design elements and dimensions

GOST 16037-80: Welded joints in steel pipelines. Main types, design elements and dimensions

GOST 16078-70: Tube connections on internal cone. Technical requirements

GOST 16093-81: Basic norms of interchangebility. Metric screw thread. Tolerances. Clearance fits

GOST 16118-70: Cylindrical helical compression (extension) springs made of round steel. Specifications

GOST 16162-85: Standard reducers. General specifications

GOST 16202-81: Basic requirements for interchangeability. Gearings conical with circular gears. Basic rack

GOST 1643-81: Cylindrical gears pairs. Accuracy

GOST 16502-83: Basic requirements for interchangeability. Globoid gears. Tolerances

GOST 16514-96: Hydraulic fluid power. Hydraulic cylinders. General technical requirements

GOST 16515-89: Positive-displacement hydraulic drives and lubricating systems. Filters and filter elements

GOST 16517-82: Hydraulic devices

GOST 16765-87: General-purpose self-propelled boom cranes. Acceptance and testing methods

GOST 16769-84: Hydraulic accumulators

GOST 16770-86: Tanks for positive-displacement hydraulic drives and lubrication systems. General technical requirements

GOST 17019-78: Fixing parts for pipelines and cables. Specifications

GOST 17020-78: Clamps, holders and belts for fixing of pipelines and cables. Design and sizes

GOST 17216-71: Industrial purity

GOST 17411-91: Positive-displacement hydraulic drives

GOST 17437-81: Air filters - moisture separators

GOST 1758-81: Basic norms of interchangeability. Bevel and hypoid gears. Tolerances

GOST 1759.1-82: Bolts, screws, studs and nuts. Tolerance, monitoring methods of dimensions and deviations of shape and surface orientation

GOST 1759.2-82: Bolts, screws, and studs. Surface imperfections and monitoring methods

GOST 1759.3-83: Nuts. Surface defects and methods of control

GOST 18175-78: Tin-free pressure-worked bronzes. Grades

GOST 18460-91: Pneumatic drives

GOST 18464-96: Hydraulic fluid power. Hydraulic cylinders. Acceptance rules and test methods

GOST 18498-89: Worm gear pairs. Terms, definitions and symbols

GOST 18698-79: Rubber delivery hoses with textile framework

GOST 18829-73: Rubber o-ring seals for hydraulic and pneumatic equipment. Specifications

GOST 19281-89: Rolled steel with increased strength. General specifications

GOST 19282-73: Low-alloyed plate strip universal steel. Specifications

GOST 19535-74: Flange joints for hydraulic and lubricating systems. Specifications

GOST 19672-74: Cylindrical worm gear pairs. Modules and coefficients of worm diameter

GOST 20245-74: Hydraulic apparatuses

GOST 20719-83: Hydraulic motors

GOST 2105-75: Forged and swaged hooks. Technical requirements

GOST 21424-75: Pin flexible couplings. Main data. Overall and coupling. Dimensions

GOST 21437-75: Zinc antifriction alloys. Marks, technical requirements and test methods

GOST 21438-75: Zinc antifriction alloys in pigs

GOST 22061-76: Machines and technological equipment. Balance quality grade system. General

GOST 22704-77: Rubber-fabric chevron seals for hydraulic units. Specifications

GOST 22790-89: Assembly units and pipelines components, designed for рnom over 10 to 100 MPa (from 100 to 1000 kgf/cm2)

GOST 22826-83: Assembly units and pipeline parts. Fillets for Pnom 9,81-98,1 MPa (100-1000 kgf/sm sq). Construction and dimensions

GOST 22827-85: General purpose self-propelled boom cranes

GOST 22895-77: Brake systems and braking properties of vehicles. Standards of effectiveness

GOST 22976-78: Hydraulic drives, pneumatic actuators and lubrication systems

GOST 23055-78: Non-destructive testing. Fusion welding of metals. Welds classification by radiography testing results

GOST 23181-78: Hydraulic brake controls of vehicles. General technical specifications

GOST 23518-79: Cas-shielded arc welding. Welded joints. Main types, design elements and dimensions

GOST 24054-80: Engineering and instrument production items. Leak detection methods. General requirements

GOST 24105-80: Plastics products. Terms and definitions of defects

GOST 24297-87: Input inspection of products. General provisions.

GOST 24642-81: Basic norms of interchangeability. Tolerances of form and position. Basic terms and definitions

GOST 24643-81: Basic norms of interchangeability. Tolerances of form and position of surfaces. Numerical values

GOST 24811-81: Rubber wipers for rods. Types, basic parameters and dimensions

GOST 24888-81: Plastics, polymers and synthetic resins. Chemical names, terms and definitions

GOST 25.502-79: Methods of mechanical testing of metals

GOST 25069-81: Basic norms of interchangeability. Unindicted tolerances of form and surface location

GOST 25288-82: Constructive plastic mosses. Quality characteristics nomenclature

GOST 25346-89: Basic norms of interchangeability. Unified system of tolerances and fits. General, series of tolerances and fundamental deviations

GOST 25347-82: Basic norms of interchangeability. Unified system of tolerances and fits. Tolerance zones and recommendable fits

GOST 25348-82: Basic norms of interchangeability. Unified system of tolerances and fits. Series of tolerances, basic deviations and tolerance zones for sizes over 3150 mm

GOST 25452-90: Unarmored high-pressure rubber hoses with metal winding

GOST 25484-93: Gear motor dives. General specifications.

GOST 26358-84: Pig iron castings

GOST 26645-85: Metal and alloy castings. Dimensions and mass tolerances and machining allowances.

GOST 2789-73: Surface roughness. Parameters and characteristics

GOST 2991-85: Wooden uncollapsible cases for weights up to 500 kg. General specifications

GOST 3057-90: Disk springs. Specifications

GOST 3212-92: Gated patterns. Pattern tapers, core prints, dimensional tolerances

GOST 3241-91: Steel ropes

GOST 3242-79: Welded joints

GOST 3325-85: Rolling bearings. Tolerance margins and technical requirements for shaft and housing seatings. Fits

GOST 3675-81: Basic requirements for interchangeability. Cylindrical worm gears. Tolerances

GOST 380-2005: Common quality carbon steel. Grades

GOST 4364-81: Air drive lines for brake systems of vehicles

GOST 492-73: Nickel, nickel and copper-nickel alloys treated under pressure. Grades

GOST 493-79: Tin-free foundry bronzes. Grades

GOST 5006-83: Toothed clutches. Specifications

GOST 535-2005: Common quality carbon steel bar and shaped sections. General specifications

GOST 613-79: Tin foundry bronzes. Grades

GOST 6357-81: Basic norms of interchangeability pipe cylindrical thread

GOST 6619-75: Single and double horned lamellar hooks. Specifications

GOST 6627-74: Single hooks. Blanks. Types. Construction and dimensions

GOST 6628-73: Ramshorn hooks. Blanks. Type. Construction and dimensions

GOST 6678-72: Rubber sealing cups for pneumatic apparatus. Specifications

GOST 6996-66: Welded joints. Methods of mechanical properties determination

GOST 7062-90: Carbon and alloyed steel forgings fabricated by press forging. Allowances and tolerances

GOST 7268-82: Steel. Method for determination of ability to mechanical aging by impact bend testing

GOST 7293-85: Cast iron with globular graphite for foundry

GOST 7505-89: Steel stamping forgings. Tolerances, allowances and forging laps

GOST 7512-82: Nondestructive testing. Welded joints. Radiography method

GOST 7829-70: Carbon and alloyed steel forgings fabricated by hammer forging. Allowances and tolerances

GOST 8.001-80: State system of ensuring the unity of measurements. Rules for conducting the state tests of measuring means

GOST 8.326-89: State system for ensuring the uniformity of measurements. Metrological certification measuring instruments

GOST 8.417-81: State system of ensuring the uniformity of measurements. Units of physical quantities

GOST 8050-85: Carbon dioxide,

GOST 8479-70: Structural carbon and alloy steel forgings

GOST 8593-81: Basic norms of interchangeabihty. Standard rates of taper and cone angles

GOST 8713-79: Flux welding. Welded joints. Maih types design elements and dimensions

GOST 8731-74: Seamless hot-deformed steel pipes. Specifications

GOST 8752-79: Metal insert rubber seals for rotating. Specifications

GOST 8908-81: Basic norms of interchangeability. Standard angles and angle tolerances

GOST 9.014-78: Unified system of corrosion and ageing protection. Temporary corrosion protection of products. General requirements

GOST 9.028-74: Unified system of corrosion and ageing protection. Interoperational anticorrosive protection of billets, parts and assemblies of metal products. General requirements

GOST 9.032-74: Unified, system of corrosion and ageing protection. Paint coatings. Groups, technical requirements and designations

GOST 9.104-79: Unified system corrosion of corrosion and ageing protection. Paint coatings. Croups of operation conditions

GOST 9.105-80: Unified system of corrosion and ageing protection. Paints coatings. Classification and basic parameters of painting methods

GOST 9.301-86: Unified system of corrosion and ageing protection. Metal and non-metal inorganic coatings. General requirements

GOST 9.302-88: Unified system of corrosion and ageing protection. Metal and non-metal inorganic coatings. Control methods

GOST 9.303-84: Unified system of corrosion and ageing protection. Metallic and non-metallic inorganic coatings. General requirements for selection

GOST 9.305-84: Unified system of corrosion and ageing protection. Metal and non-metal inorganic coatings. Technological process operations for coating production

GOST 9.306-85: Unified system of corrosion and ageing protection. Metal and non-metal inorganic coatings. Symbols

GOST 9.402-80: Metal surface preparation for painting

GOST 9178-81: Basic requirements for interchangeability. Cylindrical fine-pitch gears. Tolerances

GOST 9454-78: Metals. Method for testing the impact strength at the low, room and high temperature

GOST 9562-81: Basic norms of interchangeability. Trapezoidal single-start screw thread. Tolerances

GOST 9650-80: Pins. Specifications

GOST 977-88: Steel castings. General specifications

GOST 9833-73: Rubber toroidal sealing rings for hydraulic and pneumatic equipment. Construction and dimensions

PB 10-382-00: Rules of hoisting crane structure and safe operation. Series 10. Revision 7.

RD 22-16-2005*: Guiding regulatory material. Hoisting machines. Selection of materials for the manufacture, repair and reconstruction of welded steel structures

RD 22-205-88: Ultrasonic flaw detection of welded joints of lifting machines. Main provisions.

RD 22-74: Methods of improving the system of technological preparation of production based on the implementation of the Unified system of technological preparation of production

RD 50-629-87: Guidelines. System development and production of products. Modernization, modification and improvement of products

The Document is Referenced By:

PB 10-14-92: Codes for installation and safe operation of lifting cranes

PB 10-382-00: Rules of hoisting crane structure and safe operation. Series 10. Revision 7.

RD 10-112-3-97: Procedural Guidelines for Inspection of Hoisting Machinery with Expired Service Life. Part 3: Non-Self-Propelled Tower and Boom Cranes, and Derrick Cranes and Timber-Handling Cranes

RD 22-16-2005*: Guiding regulatory material. Hoisting machines. Selection of materials for the manufacture, repair and reconstruction of welded steel structures

RD 22-205-88: Ultrasonic flaw detection of welded joints of lifting machines. Main provisions.

RD 22-28-38-2007: Recommendations on design, production and safe operation of supporting typing back of tower cranes to building structures.

RD NIIKranostroeniya 03-05: Guidelines. Jib cranes for general use and cranes; Overhaul. General specifications

RD ROSEK-003-97: Hoisting machines. Magnetic particle control. Key Points

RD ROSEK-01-002-96: Hoisting machines. Metal structures. Radiation control. Key Points

RD RosJeK 10-KM-03: Rules for the design, construction and manufacture of hoisting cranes

RD RosJeK 10-KR-01: Rules for the design, construction and manufacture of hoisting cranes

Recommendations: Aspiration smoke-sensitive alarms VESDA. Part 1. Scope

TsRB-278: Rules for the Construction and Safe Operation of Cranes (Machines)

Customers Who Viewed This Item Also Viewed:

imgalt imgalt
Building materials. Methods for combustibility test
Language: English
Price: $162.00
imgalt
Cylindrical evolvent gears of external engagment. Strength calculation
Language: English
Price: $745.00
imgalt
Building materials spread flame test method
Language: English
Price: $147.00
imgalt
Clear sheet glass. Specifications
Language: English
Price: $250.00
imgalt
Food products, food raw materials. Method for determination of the non-steroidal anti-inflammatory drug residue content by high performance liquid chromatography – mass spectrometry
Language: English
Price: $349.00
imgalt
Steel welded vessels and apparatus. General technical conditions
Language: English
Price: $549.00
imgalt
Plywood for general use with outer layers of deciduous veneer. Specifications
Language: English
Price: $414.00
imgalt
System of Standards for Occupational Safety and Health (SSBT). Personal protective equipment for respiratory organs. Self-rescuers insulating on chemically bound or with compressed oxygen. Technical requirements. Test methods. Marking. Sampling rules
Language: English
Price: $700.00
imgalt

YOUR ORDERING MADE EASY!

RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.

Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.

We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.

Placing Your Order

Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).

Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.

For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.

For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.

Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.

Your Order Best Quality and Authenticity Guarantee

Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).

We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.

We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.

All Codes and Regulations

All Categories

Send us a message Expand Collapse

Leave your message in the form below, and we will write back by e-mail!