RD 302-07-16-91
РД 302-07-16-91
|
|
General purpose pipeline valves. Paint coatings. General technical conditions
Арматура трубопроводная общепромышленная. Покрытия лакокрасочные. Общие технические условия
Status: Not effective - Superseded
This guidance document (RD) applies to paint coatings of general industrial pipeline fittings and actuators for it (hereinafter referred to as fittings) manufactured for the needs of the national economy and for export, establishes general requirements, color, texture and classes of paint and varnish coatings. The paints and varnishes installed by this document provide for the protection of the painted surfaces of the reinforcement during transportation, storage prior to installation and operation according to GOST 9.074, GOST 9.401, GOST 9.404.
Настоящий руководящий документ (РД) распространяется на лакокрасочные покрытия общепромышленной трубопроводной арматуры и приводных устройств к ней (в дальнейшем - арматура), изготавливаемых для нужд народного хозяйства и поставки на экспорт, устанавливает общие требования, цвет, фактуру и классы лакокрасочных покрытий. Лакокрасочные материалы, устанавливаемые настоящим документом, предусматривают защиту окрашенных поверхностей арматуры во время транспортирования, хранения до монтажа и эксплуатации по ГОСТ 9.074, ГОСТ 9.401, ГОСТ 9.404.
Choose Language:
Format: Electronic (pdf/doc)
Approved: LNPOA I.I. Banner of Labor Lepse,
11/25/1991
SKU: RUSS164442
The Product is Contained in the Following Classifiers:
ISO classifier »
23 HYDRAULIC AND PNEUMATIC SYSTEMS AND GENERAL PURPOSE COMPONENTS »
23.040 Pipelines and their components »
23.040.99 Other piping components »
The Document is Replaced With:
ST TsKBA 079-2010: General purpose pipeline valves. Paint coatings. General technical conditions
The Document References:
GOST 10144-89: Enamels XB-124Specifications
GOST 10214-78: Petroleum solvent. Specifications
GOST 10277-90: Putties. Specifications
GOST 11066-74: Thermostable silicoorganic lacquers and enamels. Specifications
GOST 12.1.004-91: Fire safety. General requirements
GOST 12.1.005-88: General sanitary requirements for working zone air
GOST 12.1.007-76: Noxious substances. Classification and general safety requirements
GOST 12.1.019-79: Occupational safety standards system. Electric safety. General requirements and nomenclature of kinds of protection
GOST 12.3.005-75: Painting works
GOST 12034-77: Enamels MЛ-165, MЛ-165ПM and MC-160. Specifications
GOST 12707-77: Wash primers. Specifications
GOST 12708-77: Solvent PФГ for wash primers. Specifications
GOST 14710-78: Petroleum toluene
GOST 15140-78: Paintwork materials. Methods for determination of adhesion
GOST 15150-69: Machines, instruments and other industrial products. Modifications for different climatic regions. Categories, operating, storage and transportation conditions as to environment climatic aspects influence
GOST 1571-82: Turpentine oil
GOST 15907-70: Varnishes ПФ-170 and ПФ-171. Specifications
GOST 16508-70: Insulating silicon varnishes. Specifications
GOST 17.2.3.02-78: Regulations for establishing permissible emissions of noxious pollutants from industrial enterprises
GOST 18188-72: Solvents of grades 645, 646, 647, 648 for paint materials. Specifications
GOST 19.404-79: Unified system for program documentation. Explanatory note. Requirements for contents and form of presentation
GOST 1928-79: Coal solvent. Specifications
GOST 23143-83: Enamels ЭП-773. Specifications
GOST 23343-78: Primer ГФ-0119. Specifications
GOST 25129-82: Primer GF-031. Specifications
GOST 25718-83: Primers AK-069 and AK-070. Specifications
GOST 26304-84: Industrial pipeline valves supplied
GOST 2768-84: Acetone technical. Specifications
GOST 28379-89: Putties ЭП-0010 and ЭП-0020. Specifications
GOST 2874-82: Drinking water. Hygienic requirements and quality control
GOST 3134-78: White spirit
GOST 4666-75: Valves. Marking and distinctive painting
GOST 5494-71: Pegmentary aluminium powder
GOST 5494-95: Pigmentary aluminium. Specifications
GOST 5631-79: Lacquer BT-577 and paint BT-177. Specifications
GOST 6465-76: Enamels PF-115. Specifications
GOST 7313-75: Enamels ХВ-785 and lacquer XB-784. Specifications
GOST 7827-74: Solvents of grades P-4, P-4A, P-5, P-5A, P-12 for paint materials. Specifications
GOST 7930-73: Enamels НЦ-1125. Specifications
GOST 8313-88: Technical ethylcellosolve. Specifications
GOST 8420-74: Paint and lacquer materials. Method for determination of relative viscosity
GOST 9.032-74: Unified, system of corrosion and ageing protection. Paint coatings. Groups, technical requirements and designations
GOST 9.104-79: Unified system corrosion of corrosion and ageing protection. Paint coatings. Croups of operation conditions
GOST 9.105-80: Unified system of corrosion and ageing protection. Paints coatings. Classification and basic parameters of painting methods
GOST 9.401-91: Unified system of corrosion and ageing protection. Paint coatings. General requirements and methods of accelerated tests on resistance to the action of climatic factors.
GOST 9.402-2004: Unified system of corrosion and ageing protection. Paint coatings. Metal surface preparation for painting
GOST 9.402-80: Metal surface preparation for painting
GOST 9070-75: Viscometers for determination of relative viscosity of paint and lacquer materials. Specifications
GOST 9109-81: Primers ФЛ-03k and ФЛ-03Ж. Specifications
GOST 9134-78: Shoes. Methods for determination of bottom parts attaching strength
GOST 9198-83: Enamels of types НЦ-11 and НЦ-11А. Specifications
GOST 926-82: Enamels ПФ-133. Specifications
GOST 9410-78: Petroleum xylol. Specifications
GOST 9640-85: Enamels ЭП-51. Specifications
GOST 9754-76: Enamels MЛ-12 type. Specifications
GOST 9880-76: Coal and shale toluenes. Specifications
GOST 9949-76: Coal xylene. Specifications
The Document is Referenced By:
OST 26-07-596-72: Electric drives for pipeline fittings. Export including tropical climate countries. General requirements.
ST TsKBA 079-2010: General purpose pipeline valves. Paint coatings. General technical conditions
ST TsKBA 087-2010: Pipe fittings. Electric drives. General technical conditions
Customers Who Viewed This Item Also Viewed:
 |
Cylindrical evolvent gears of external engagment. Strength calculation
Language: English |
Unified system for design documentation. Types and sets of design documentation
Language: English |
Loads and impacts
Language: English |
High strength rolled steel. General specification
Language: English |
Food products, food raw materials. Method for determination of the non-steroidal anti-inflammatory drug residue content by high performance liquid chromatography – mass spectrometry
Language: English |
Articulated connector devices with cast male and female parts for freight cars of articulated type. General technical specifications
Language: English |
Plywood for general use with outer layers of deciduous veneer. Specifications
Language: English |
 |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.