imgalt

RD 34-10.030-89

РД 34-10.030-89

Rules for quality control of welded joints of pipelines of nuclear power plants

Правила контроля качества сварных соединений трубопроводов атомных станций

Status: Effective - Introduced for the first time

The document establishes the procedure, methods and scope of control, as well as standards for assessing the quality of welded joints in the manufacture, installation and repair of welded joints of pipelines. The requirements of the governing document apply to welded joints of pipelines, the design of which was started after its introduction into operation.

Документ устанавливает порядок, методы и объемы контроля, а также нормы оценки качества сварных соединений при изготовлении, монтаже и ремонте сварных соединений трубопроводов. Требования руководящего документа распространяются на сварные соединения трубопроводов, проектирование которых начато после введения его в действие.

Choose Language: 
Format: Electronic (pdf/doc)

Approved: USSR Ministry of Energy and Electrification, 12/4/1989

SKU: RUSS164957


Price: imgalt
imgalt

The Product is Contained in the Following Classifiers:

Construction (Max) » Regulations » Sectoral and departmental regulatory and methodological documents » Design and construction of energy facilities »

PromExpert » SECTION IV. INDUSTRIAL SAFETY » III Nuclear and radiation safety » 3 Atomic stations »


The Document References:

GOST 12.1.004-85: Occupational safety standards system. Fire safety. General requirements

GOST 12.1.004-91: Fire safety. General requirements

GOST 12.1.005-76: Occupational safety standards system. Working zone air. General hygiene requirements

GOST 12.1.007-76: Noxious substances. Classification and general safety requirements

GOST 14782-86: Nondestructive testing. Welded joints. Ultrasonic methods

GOST 18442-80: Non-destructive testing. Capillary methods. General requirements

GOST 21105-75: Non-destructive testing. Method of magnetic particle testing

GOST 24297-87: Input inspection of products. General provisions.

GOST 356-80: Valves and details for piping. Pressures conditional, test and operational. Lines.

GOST 6032-2003: Corrosion-resistant steels and alloys. Test methods of intercrystalline corrosion resistance

GOST 6032-89: Corrosion-resistant steels and alloys. Methods for determination of intercrystalline corrosion resistance

GOST 6996-66: Welded joints. Methods of mechanical properties determination

GOST 7512-82: Nondestructive testing. Welded joints. Radiography method

GOST 8.002-86: State system for ensuring the uniformity of measurements. State supervision and department control of measuring instruments. Basic regulations

GOST 8.326-78: The State Measurement System. Metrological assurance of development, manufacturing and operation of unstandardized measuring instruments. General principles

GOST 9466-75: Covered metal electrodes for manual arc welding of steels and deposition. Classification and general specifications

OST 34-42-816-85: Welding of pipelines from the pearlitic and austenitic steels on nuclear power plants. Main provisions.

PB 10-573-03: Series 17. Supervision documents in power industry. Issue 46. Construction and safe operation of steam and hot water pipelines rules.

PNAE G-7-003-87: Certification Requirements for Welders of Equipment and Piping for Nuclear Power Plants

PNAE G-7-010-89: Equipment and pipelines of nuclear energy facilities. Welded joints and beads. Testing rules

PNAE G-7-013-89: Mutual recognition of accreditation of laboratories performing tests, verification or calibration of measuring instruments

PNAE G-7-014-89: Standardized methods of testing of basic materials (semifinished products, weld joints and surfacing of equipment and piping of npp. Ultrasonic inspection. Part I. Control of basic materials (semifinished products)

PNAE G-7-015-89: Uniform methods of inspection of main materials (semi-finished products), welded joints and building-up of the equipment and piping of nuclear power units. Magnetic particle inspection

PNAE G-7-016-89: Standardized methods of control of basic materials (semifinished products), welded joints and cladding of equipment and of pipelines of NPP. Visual and a measuring control

PNAE G-7-017-89: Unified technique of inspection of base materials (semifinished products), welded joints and deposits of equipment and pipelines of atomic power plants. Ultrasonic inspection

PNAE G-7-018-89: Safety guidelines. Standardized methods of control of basic materials (semi-finished products), welded joints and surfacing of NPP equipment and piping. Dye penetrant inspection

SN 527-80: Instructions on Designing of Steel Process Piping, Рnom up to 10 MPa

SNiP 3.05.05-84: Processing equipment and process pipelines

Customers Who Viewed This Item Also Viewed:

imgalt imgalt
Building materials. Methods for combustibility test
Language: English
Price: $162.00
imgalt
Cylindrical evolvent gears of external engagment. Strength calculation
Language: English
Price: $745.00
imgalt
Building materials spread flame test method
Language: English
Price: $147.00
imgalt
Food products, food raw materials. Method for determination of the non-steroidal anti-inflammatory drug residue content by high performance liquid chromatography – mass spectrometry
Language: English
Price: $349.00
imgalt
Steel welded vessels and apparatus. General technical conditions
Language: English
Price: $549.00
imgalt
Plywood for general use with outer layers of deciduous veneer. Specifications
Language: English
Price: $414.00
imgalt
System of Standards for Occupational Safety and Health (SSBT). Personal protective equipment for respiratory organs. Self-rescuers insulating on chemically bound or with compressed oxygen. Technical requirements. Test methods. Marking. Sampling rules
Language: English
Price: $700.00
imgalt

YOUR ORDERING MADE EASY!

RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.

Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.

We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.

Placing Your Order

Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).

Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.

For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.

For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.

Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.

Your Order Best Quality and Authenticity Guarantee

Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).

We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.

We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.

All Codes and Regulations

All Categories

Send us a message Expand Collapse

Leave your message in the form below, and we will write back by e-mail!