RD 39-0148306-413-88
РД 39-0148306-413-88
|
|
Method for calculating fugitive emissions from gas processing plants
Методика расчета неорганизованных выбросов газоперерабатывающих установок
Status: Not effective
The technique is intended for calculating fugitive emissions due to leaks of the processed gas from process equipment, units and valves. The method is intended for the calculation of the magnitude of fugitive emissions into the atmosphere by existing and projected gas processing plants, compressor units and other enterprises that process oil gas when operating in routine conditions
Методика предназначена для расчета неорганизованных выбросов, обусловленных утечками перерабатываемого газа из технологических аппаратов, агрегатов и запорно-регулирующей арматуры. Методика предназначена для расчетного определения величины неорганизованных выбросов в атмосферу действующими и проектируемыми газоперерабатывающими заводами, компрессорными установками и другими предприятиями, перерабатывающими нефтяной газ при работе в регламентных режимах
Choose Language:
Format: Electronic (pdf/doc)
SKU: RUSS165045
The Product is Contained in the Following Classifiers:
PromExpert »
SECTION V. ENVIRONMENTAL PROTECTION. NATURE USE »
II Ensuring environmental safety »
1 Air Protection »
1.3 Requirements for protection of atmospheric air in carrying out activities »
1.3.2 Requirements for protection of atmospheric air during design, placement, construction, reconstruction and operation of facilities »
ISO classifier »
75 EXTRACTION AND PROCESSING OF OIL, GAS AND RELATED PRODUCTION »
75.020 Production and processing of oil and natural gas »
The Document References:
GOST 10019-74: Relief valves, spring, non-rising, flanged, steel, for PN 16 kgf / cm2. Specification
GOST 10042-75: The wedge gate valves with non-sliding spindle are flanged cast iron on Rd approximately equal to 0.25 MPa (2.5 kgf / cm2). Specification
GOST 10421-75: Bellows locking shut-off valves for Pp approximately equal to 1 MPa (10 kgf / cm2)
GOST 10738-76: The wedge gate valves with sliding spindle steel on Pd approximately 2.5 MPa (25 kgf / cm2). Specification
GOST 10926-75: The wedge gate valves with sliding spindle steel on Pd approximately 6.4 MPa (64 kgf / cm2). Specification
GOST 11823-74: Backward lifting valves from gray and malleable iron for Pd up to 2,5 MPa (25 kgf / cm2). Technical requirements
GOST 12.0.003-74: Dangerous and harmful production effects. Classification
GOST 12154-74: Plug-in cocks, tensile, cast-iron for gas pipelines at PN 0,1 MPa (1 kgf / cm2). Specification
GOST 12521-77: Butterfly valves. The main parameters
GOST 12532-79: Direct-acting safety valves. Types and main parameters
GOST 12673-71: Wedge gate valves with retractable spindle, flanged steel for Pn 0.25 MPA (2.5 kgf / cm2 Specification
GOST 12815-80: Flanges for valves, fittings and pipelines for Pnom from 0,1 to 20 MPa (from 1 to 200 kgf/sq sm). Types. Connecting dimensions and dimensions of sealing surfaces
GOST 12816-80: Flanges for valves, fittings and pipelines for Pnom from 0,1 to 20 MPa (from 1 to 200 kgf/sq sm). General technical requirements
GOST 12817-80: Cast grey iron flanges for Pnom from 0,1 to 1,6 MPa (from 1 to 16 kgf/sq sm). Design and dimensions
GOST 12818-80: Cast malleable iron flanges for Pnom from 1,6 to 4,0 MPa (from 16 to 40 kgf/cm2). Design and dimensions
GOST 12819-80: Cast steel flanges for Pnom from 1,6 to 20,0 MPa (from 16 to 200 kgf/sq sm). Design and dimensions
GOST 12820-80: Steel plane welded flanges for Pnom from 0,1 to 2,5 MPa (from 1 to 25 kgf/cm2). Design and dimensions
GOST 12821-80: Steel butt-welded flanges for Pnom from 0,1 to 20,0 MPa (from 1 to 200 kgf/cm2). Design and dimensions
GOST 12822-80: Steel loose flanges with welded ring for Pnom from 0,1 to 2,5 MPa (from 1 to 25 kgf/sq sm). Design and dimensions
GOST 12893-83: Single-seated, double-seated and cage control valves.
GOST 13252-73: Check valves reversible rotary, made of steel for design pressure Pd 16 MPa (160 kgf / cm2) Technical requirements
GOST 13547-79: Butterfly valves for pnom up to 2.5 MPa (25 kgf/cm2)
GOST 14237-69: Low flow single port actuating device SSI. Types and basic parameters
GOST 14238-69: Middle flow single port actuating device SSI. Types and basic parameters
GOST 14239-69: Middle flow double port actuating device SSI. Types and basic parameters
GOST 14242-69: Middle flow three-way actuating device SSI. Types and basic parameters
GOST 14264-78: Backward lifting valves made of corrosion-resistant steel at PN 1.6 MPa (16 kgf / cm2). Specification
GOST 14769-69: Butterfly actuating devices SSI. Types and main parameters
GOST 17.2.1.03-84: Nature protection. Atmosphere. Terms and definitions for air pollution control
GOST 17.2.1.04-77: Nature protection. Atmosphere. Sources and meteorological factors of pollution, industrial emissions. Terms and definitions
GOST 18580-73: Check valves reversible rotary with single disk, made of steel for design pressure Pd 4 MPa (40 kgf / cm2). Specification
GOST 18581-73: Check valves reverse flanged from corrosion-resistant steel to PN 4 MPa (40 kgf / cm2). Specification
GOST 18584-73: Check valves reversible rotary with single disk, made of steel for design pressure Pd 16 MPa (160 kgf / cm2). Specification
GOST 18722-73: Shut-off sleeve valves made of malleable iron for Pd approximately 1.6 MPa (16 kgf / cm2). Specification
GOST 19192-73: The check valves, of steel flanged and welded to Pd approximately equal to 4 MPa (40 kgf / cm2). Specification
GOST 19193-73: The plug-in cocks are gland-flanged and box-type cast iron ones on Pd approximately equal to 1 MPa (10 kgf / cm2)
GOST 19500-74: Malleable iron chaklift screwed and flanged valves for Pnom 1,6 mpa (16 kgf/sq cm)
GOST 19501-74: Backward lifting and flanged valves from malleable iron for Pd 1.6 and 2.5 MPa (16 and 25 kgf / cm2). Specification
GOST 19627-74: Hydroquinone (paradioxybenzene). Specifications
GOST 20294-74: Acid-proof steel straightway top valves with for Pnom 1,6 mpa (16 kgf/cm2)
GOST 20770-75: Backward lifting steel flanged and welded valves for Pd 4 MPa (40 kgf / cm2). Specification
GOST 21345-78: Conical, ball and cylindrical cocks set at рnom of up to approx. 16 MPa ( 160 kgf/cm2)
GOST 22222-76: Sealed valves. The main parameters
GOST 22446-77: Shut-off valves made of corrosion protection iron for Pd approximately 1.6 MPa (16 kgf / cm2). Specification
GOST 23229-78: Shut-off valves made of corrosion-resistant steel for Pd 4 MPa (40 kgf / cm2). Specification
GOST 23886-79: Cadmium sheets and plates. Specifications
GOST 24095-80: Stop valves with diaphragm of cast-iron. Specification
GOST 2704-77: Tapered gland valves made of brass for Pd 1 MPa (10 kgf / cm2). Specification
GOST 5197-85: Vacuum technology. Terms and definitions
GOST 5761-74: Valves for nominal pressure
GOST 5762-74: Pipeline industrial valves. Gate valves PN £ 250. General specifications
GOST 8437-75: Parallel gate valves with the sliding spindle, the flanged cast iron on the Pd about 1.0 MPa (10 kgf / cm2). Specification
GOST 9544-75: Pipeline stop valves. Standards for disc tightness
GOST 9652-68: Shutoff Devices of level indicators of liquids for Pd up to 40 kgf / cm2. Specification
GOST 9789-75: Safety spring full-lifted flanged steel valves for p stip "1.6 and 4.0 MPa (16 and 40 kgf/cm2)
|
Customers Who Viewed This Item Also Viewed:
 |
Metals. Methods of tension test
Language: English |
Liquids for aircrafts systems. Method for determination thermo oxidizing stability and corrosion activity
Language: English |
Natural gas for industrial and municipal purposes. Technical conditions
Language: English |
Global navigation satellite system. Emergency response system in case of accidents. Test methods for emergency services call device/system for compliance with the requirements for the quality of loudspeaker communication in the vehicle cab.
Language: English |
 |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.
