GOST 9467-75
ГОСТ 9467-75
|
|
Metal covered electrodes for manual arc welding of structural and heat-resistant steels. Types
Электроды покрытые металлические для ручной дуговой сварки конструкционных и теплоустойчивых сталей Типы
Status: Effective - Supersedes. The limitation of the effectiveness period has been lifted: Protocol No. 3-93 of the IGU dated 03/12/93 (IUS 5-6-1993).
The standard applies to coated metal electrodes for manual arc welding of carbon, low-alloyed and alloyed structural and alloyed heat-resistant steels.
Стандарт распространяется на покрытые металлические электроды для ручной дуговой сварки углеродистых, низколегированных и легированных конструкционных и легированных теплоустойчивых сталей.
Choose Language:
Format: Electronic (pdf/doc)
Approved: Gosstandart of the USSR,
3/27/1975
SKU: RUSS16526
The Product is Contained in the Following Classifiers:
Construction (Max) »
Standards »
Other state standards used in construction »
25 Mechanical Engineering »
Welding regulations »
Welding work »
Welding regulations »
Main materials »
Welding regulations »
Welding materials »
Welding regulations »
Heat treatment »
Welding regulations »
Welding work »
Manual welding »
Welding regulations »
Main materials »
Steel, cast iron »
Welding regulations »
Main materials »
Non-ferrous metals »
Welding regulations »
Welding materials »
Electrodes »
Standards for pipe fittings (TPA) »
10. Production »
10.3 Welding »
PromExpert »
SECTION I. TECHNICAL REGULATION »
V Testing and control »
4 Testing and control of products »
4.12 Testing and control of products of metallurgical industry »
4.12.6 Metal products »
ISO classifier »
25 MECHANICAL ENGINEERING »
25.160 Welding, brazing and hard soldering »
25.160.20 Welding consumables »
National standards »
25 MECHANICAL ENGINEERING »
25.160 Welding, brazing and hard soldering »
25.160.20 Welding consumables »
National Standards for KGS (State Standards Classification) »
Latest edition »
V Metals and metal products »
V0 General rules and regulations on metallurgy »
V05 Welding and cutting of metals. Soldering, riveting »
As a Replacement Of:
GOST 9467-60: Metal electrodes for arc welding of structural and heat-resistant steels. Types
The Document References:
GOST 6996-66: Welded joints. Methods of mechanical properties determination
GOST 9466-75: Covered metal electrodes for manual arc welding of steels and deposition. Classification and general specifications
The Document is Referenced By:
GOST 10037-83: Autoclaves for building industry
GOST 11265-73: Bitts. Specifications
GOST 11435-75: Blacksmith's hand and hammer tools. Technical requirements
GOST 1204-67: Rotable brake shoe holder of the brake shoe for vehiclef of 1524 mm gauge. Specifications
GOST 12367-85: Tube mills of grinding units. General technical specifications
GOST 12393-77: Fittings for overhead system of electric railways. General specifications
GOST 12826-67: Flanges without a connecting protrusion, of steel with a neck on a thread on Pd from 1 to 16 kgf / cm2. Design, dimensions and technical requirements
GOST 12840-80: Safety locks for single hooks. Type and dimensions
GOST 13276-79: Overhead line hardware. General specifications
GOST 13716-73: Slinging arrangements for vessels and apparatus. Specifications
GOST 13981-77: Forms for reinforced concrete pressure pipes made by vibrohydropressed method. Specifications
GOST 13981-87: Forms for reinforced concrete pressure pipes made by vibrohydropressed method. Specifications
GOST 14110-80: Reusable semirigid slings. Specifications
GOST 14110-97: Reusable semi rigid slings
GOST 14116-85: Vessels attaching rigs. Election lugs. Technical requirements
GOST 15102-75: Universal metallic closed container of nominal gross mass 5,0 tn. Specifications
GOST 15860-84: Steel welded cylinders for liquefied hydrocarbon gases at pressure up to 1.6 MPa.
GOST 17366-80: Welded thick-walled steel barrels for chemical products
GOST 18103-84: Installations for manufacturing reinforced concrete three-dimensional elements of sanitary engineering cabins and lift shafts. Specifications
GOST 18104-81: Forms of steel for the manufacture of reinforced concrete centrifuged non-pressure pipes. Specification
GOST 18579-79: Lifting devices of middle size freight containers with rating to 6 ton for general and specific cargoes. Specifications
GOST 19330-2013: Masts (poles) for overhead contact line supports of railways. Specifications
GOST 19804.6-83: Reinforced-concrete round hole built-up piles and tubular piles. Structure and dimensions
GOST 20435-75: Universal metallic closed container of nominal gross mass 3,0 tn. Specifications
GOST 21029-75: Aluminum barrels for chemical products
GOST 21133-75: Specialized box pallets for potatoes, vegetables, fruits, melons and gourds. Specification
GOST 21133-87: Specialized box pallets for potatoes, vegetables, fruits, melons and gourds
GOST 22661-77: Grapples for containers with a gross weight of 3.0, 5.0, and 6.0 metric tons
GOST 22685-89: Moulds for making control specimens of concrete. Specifications
GOST 22778-77: Accessories for vertical cylindrical storage tank for petroleum products. Roll blocks. Basic parameters and dimensions. Technical requirements
GOST 22779-77: Accessories for vertical cylindrical storage tank for petroleum products. Siphon taps. Basic parameters and dimensions. Technical requirements
GOST 22784-77: Accessories for vertical cylindrical storage tank for petroleum products. Mechanisms for controlling crackers with a bypass. Basic parameters and dimensions. Technical requirements
GOST 23212-78: Units of versatile press tools for clipping. Specifications
GOST 23858-2019: Welded butt joints of reinforced concrete structures. Ultrasonic methods of quality control. Acceptance rules
GOST 24201-80: Connective and fastening components of glass pipelines
GOST 24587-81: Reinforced concrete flumes-water outlets of irrigation systems. Specifications
GOST 24618-81: Steel cleats. Specifications
GOST 24663-81: Steam and hot water boilers. Requirements for steel welding
GOST 24741-2016: Joint for connection of crane rails to steel crane girders. Specifications
GOST 24741-81: Joint for connection of crane rails to steel crane girders. Specifications
GOST 24992-2014: Masonry structures. Method of estimating bonding strength in masonry
GOST 24992-81: Masonry structures. Method of estimating bonding strength in masonry
GOST 25781-2018: Steel molds for the manufacture of reinforced concrete products. Technical specifications
GOST 25781-83: Steel moulds for reinforced concrete members. Specifications
GOST 26155-84: Barrels from corrosion-resistant steel
GOST 26819-86: Reinforced concrete pressure pipes with steel mandrel
GOST 29166-91: Mechanical attractions. Steel structures. Principal rules of the design
GOST 30765-2001: Metal transport packagings. General specifications
GOST 31832-2012: Well sucker rod pump drives. General technical requirements
GOST 31841-2012: Petroleum and natural gas industries. Well service equipment. General technical requirements
GOST 31846-2012: Special Rolling Stock. Requirements for Bearing Structure Strength and for Dynamic Properties
GOST 32569-2013: Steel pipe technology. Requirements for design and operation of explosive and chemically dangerous production
GOST 3269-78: Stationary brake shoe holder for freight wagons of the 1520 mm gauge railways. Specifications
GOST 32947-2014: Automobile roads of general use. Supports of stationary electric lighting. Technical requirements
GOST 33535-2015: Connections and crossings of railway tracks. Specifications
GOST 33797-2016: Cross beams of rigid portals for overhead contact line of railway transport. General specifications
GOST 33857-2016: Pipe fittings. Welding and quality control of welded joints. Technical requirements
GOST 33976-2016: Welded joints in steel structures of railway rolling stock. Requirements for design, implementation and quality control
GOST 34881-2022: Trunk pipeline transport of oil and petroleum products. Stationary booms for containment of oil and oil products spills. General technical conditions
GOST 3726-67: Accessories for vertical cylindrical storage tank for petroleum products. Siphon taps
GOST 4621-79: Accessories for horizontal cylindrical storage tanks for petroleum products. Receiving and distributing sleeve. Technical requirements
GOST 4623-80: Equipment for vertical and horizontal for petroleum products. The mechanism of control of the cracker (upper). Specification
GOST 4624-70: Equipment for horizontal tanks for petroleum products. Ventilating tip
GOST 4626-79: Equipment for horizontal tanks for petroleum products. Valve inlet. Specification
GOST 5.403-70: Steel-teeming ladles. Quality requirements for certified products
GOST 5172-63: Cylindric steel gas-holders with constancy of volume. Parameters and basic dimensions
GOST 6247-79: Steel welded barrels with rolling hoops on the shell
GOST 766-74: Anchors. General specifications
GOST 8497-78: Matrosov's anchor. Specifications
GOST 9078-84: Flat pallets
GOST 9466-75: Covered metal electrodes for manual arc welding of steels and deposition. Classification and general specifications
GOST 9570-2016: Box and pestpallets. General specifications
GOST 9570-84: Box and post pallets
GOST 9690-71: Lanyard stoppers
GOST R 51177-2017: Overhead line hardware. General technical requirements
GOST R 51177-98: Overhead line hardware. General specifications
GOST R 51224-98: Equipment for bank protection. Doors and manholes. General specifications
GOST R 51365-2009: Petroleum and natural gas industries. Drilling and production equipment. Wellhead and Christmas tree equipment. General specifications
GOST R 51365-99: Control head oil field equipment. General specifications
GOST R 51763-2001: Well sucker rod pump drives. General technical requirements
GOST R 52170-2003: Mechanized attractions safety. Principal rules of the design of steel constructions
GOST R 52664-2006: Welded pipe sheet piles. General specifications
GOST R 52664-2010: Welded pipe sheet piles. Specifications
GOST R 53192-2008: Welded steel structures of freight cars. Technical requirements
GOST R 53192-2014: Welded joints in steel structures of railway rolling stock. Requirements for design, production and quality control
GOST R 53337-2009: Special rolling stock. Requirements for bearing structure stength and for dynamic properties
GOST R 53629-2009: Sheet piles of steel cold-formed sections. Specifications
GOST R 53680-2009: Petroleum and natural gas industries. Well service equipment. General technical requirements
GOST R 54270-2010: Masts (Poles) for overhead contact line supports of railways. Specifications
GOST R 54803-2011: High-pressure welded steel vessels. General technical requirements
GOST R 54889-2012: Reusable semirigid slings. Specifications
GOST R 54892-2012: Installation of air separation plants and other cryogenic equipment. General provisions
GOST R 55186-2012: Cross beams of rigid portals for overhead contact line of railway transport. General specifications
GOST R 55989-2014: Trunk gas pipelines. Design standard for pressure over 10 MPa. Principal requirements
GOST R 56204-2014: Steam and hot-water stationary boilers. Steel structures. General operating specification
GOST R 57471-2017: Explosion-proof metal works. General technical requirements and test methods
GOST R 58018-2017: Interim composite polymeric supports for overhead power lines voltage 35-220 kV. General specifications
GOST R 58021-2017: Composite polymeric supports for overhead power lines of voltage 6-20 kV. General specifications
GOST R 58934-2020: Plants for the manufacture of reinforced concrete volume blocks of sanitary cabins and elevator shafts. Specifications
GOST R 58935-2020: Forms for the manufacture of reinforced concrete vibrohydropressed pressure pipes. Specifications
GOST R 70461-2022: Construction works and typical technological processes. Steel structures made of pipes and closed profiles. Rules and control of installation work
IM 4-12-95: Automation systems. Handbook of materials. Part 1. Basic materials
Manual: Manual for impulse and low consumption fire extinguishing systems
Manual for SNiP II-23-81*: Manual on the design of steel structures of overhead power lines (VL) power transmission towers and outdoor switchgears (outdoor switchgear) of substations with voltages above 1 kV
Manual for SNiP II-23-81*: Strength Design Guide for Steel Structures
Manual for SNiP II-23-81*: Steel Structural Engineering Tutorial
Manual to SNiP II-23-81: Manual to SNiP II-23-81 on design of strengthening of steel structures
MDS 12-25.2006: Scaffolding. Installation, calculation, and operation
MDS 12-58.2011: Scaffolding. Manufacturing, installation, operation
MN 5010-63: Details of pipelines on the Ru from 200 to 1000 kgf / cm2. Technical requirements
ODM 218.4.003-2009: Recommendations for joining metal beams with a monolithic slab by means of continuous comb stops in steel concrete bridges
OST 108.030.04-75: Stationery steam boilers. Devices for sampling of steam and water. Types, design and dimensions. Technical requirements
OST 108.030.30-79: Stationary structural steel boilers. General specifications.
OST 108.030.45-82: Tubular air heaters for stationary boilers. General Specifications.
OST 108.033.01-86: mechanical stokers. Technical conditions.
OST 108.101.101-76: Water-steam heaters. Casings. Design and dimensions.
OST 108.101.102-76: Water-steam heaters. Forward water chambers (with flat bottom, two-way). Design and dimensions.
OST 108.101.103-76: Water-steam heaters. Forward water chambers (with flat bottom, four-way). Design and dimensions.
OST 108.101.104-76: Water-steam heaters. Forward water chambers (with elliptic bottom, two-way). Design and dimensions.
OST 108.101.105-76: Water-steam heaters. Forward water chambers (with elliptic bottom, four -way). Design and dimensions.
OST 108.101.106-76: Water-steam heaters. Aft water chambers (with flat bottom, two-way). Design and dimensions.
OST 108.101.107-76: Water-steam heaters. Aft water chambers (with flat bottom, four-way). Design and dimensions.
OST 108.101.108-76: Water-steam heaters. Aft water chambers (with elliptic bottom, two-way). Design and dimensions.
OST 108.101.109-76: Water-steam heaters. Aft water chambers (with elliptic bottom, four -way). Design and dimensions.
OST 108.101.110-76: Water-steam heaters. Covers. Design and dimensions.
OST 108.101.111-76: Water-steam heaters. Covers. Design and dimensions.
OST 108.271.106-76: Water-steam heaters. 2000 mm tubing. Design and dimensions.
OST 108.271.107-76: Water-steam heaters. 3000 mm tubing. Design and dimensions.
OST 108.275.25-80: Single-yoke supports for CHP and NTP plants. Design and dimensions.
OST 108.275.26-80: Double-yoke fixed supports for thermal and nuclear power plants piping. Design and dimensions.
OST 108.275.28-80: Double-yoke fixed supports for corrosion-resistant austenitic steel (grade АЭС) pipelines. Design and dimensions.
OST 108.275.41-80: Guiding plates for CHP plants and nuclear thermal power plant pipeline supports. Design and dimensions.
OST 108.275.47-80: Fixed welded supports for thermal and nuclear power plants piping. Design and dimensions.
OST 108.275.49-80: Sliding welded guiding supports for thermal and nuclear power plants piping. Design and dimensions.
OST 108.313.102-76: Water-steam heaters. Casings. Branch pipes with flanges. Design and dimensions.
OST 108.530.03-82: Lobes for CHP plant pipelines. Design and dimensions.
OST 108.530.101-76: Water-steam heaters. Bosses. Design and dimensions.
OST 108.764.01-80: Cylindrical helical springs for CHP plant and NTP plant pipeline hangers. Construction, dimensions and specifications.
OST 108.837.01-82: Reference points for control of residual deformation of steam lines of thermal power plant. Technical requirements.
OST 108.940.02-82: Welded joint Seams of thermal power plants pipelines. Types and main dimensions.
OST 24.050.34-84: Wagon steel structures design and production. Specifications.
OST 24.125.166-01: Spring units for supporting pipelines of CHP plant and nuclear thermal power plant. Design and dimensions.
OST 24.125.170-01: Details and prefabricated units of supports, hangers, ties for lens compensators and drives for remote control of pipe fittings in thermal and nuclear power plants. General Specifications.
OST 24.125.31-89: Welded seams for CHP plant pipeline joints. Types and main dimensions.
OST 24.200.02-91: Assembling units of steel pipelines on nominal pressure<=10 MPa (100 kgf/cm2) of complete technological lines. General specifications.
OST 24.201.03-90: Steel high-pressure vessels and devices. General technical requirements.
OST 24.940.01-90: Welded steel structures. General technical requirements.
OST 26.260.01-2001: Steel enamel vessels and devices. General technical specifications.
OST 26.260.18-2004: Process modules for oil and gas industry. General technical specifications
OST 26.260.480-2003: Two-ply steel vessels and devices. Welding and weld deposition.
OST 26.260.758-2003: Metal structures. General technical requirements.
OST 26-01-1434-87: Welding of steel technological pipelines on nominal pressure over 10 to 100 MPa (over 100 to 1000 kgf/cm2). Technical requirements.
OST 26-01-151-82: Steel welded vessels and devices for low-temperature gas separations. Technical requirements, acceptance regulations and testing methods.
OST 26-291-94: Steel welded vessels and devices. General technical requirements.
OST 26-3-87: Welding in chemical mechanical engineering. Main provisions.
OST 32.48-95: Air reservoirs for traction rolling stock. Overall and mounting dimensions and technical requirements
OST 34.42.319-77: Parts and components for dust-gas-air ducts of thermal power plants. Trapdoor 500x600 for flat surfaces. Construction and dimensions.
OST 34-10-468-89: Captivating welded and casted plates for turbo-units. Captivating casted non-symmetrical plates. Design and dimensions.
OST 34-10-469-89: Captivating welded and casted plates for turbo-units. Captivating casted non-symmetrical plates. Design and dimensions.
OST 34-10-470-89: Captivating welded plates for dynamometer installation. Design and dimensions.
OST 34-10-475-89: Captivating welded and casted plates for turbo-units. Welded support. Design and dimensions.
OST 34-10-581-93: Lens compensators for Pnom ≤1.6 MPa (16 kg/cm2). General technical requirements.
OST 34-10-610-93: Fixed support for vertical boxes. Types and basic dimensions.
OST 34-10-612-93: Spring-controlled roller unit. Types and main dimensions.
OST 34-10-621-93: Welded branches bearing. Types and basic dimensions.
OST 34-10-622-93: Tubular support for knuckle bends. Types and basic dimensions.
OST 34-10-623-93: Sliding fixed support. Types and basic dimensions.
OST 34-10-723-93: Assembling units and station pipeline hang details, Working pressure<2,2 MPa of CHP plant, nuclear thermal power plant and dust-and-gas windpipes of CHP plant. General technical requirements.
OST 34-10-730-93: Suspension unit with eye bar. Design and dimensions.
OST 34-10-743-93: Spring unit. Design and dimensions.
OST 34-42-758-85: Details and prefabricated units of TPS pipelines, Pnom≤4 MPa (40 kg/cm2). Welded flat caps. Construction and dimensions.
OST 34-42-759-85: Details and prefabricated units of TPS pipelines, Pnom≤4 MPa (40 kg/cm2). Welded flat caps with edges. Construction and dimensions.
OST 34-42-816-85: Welding of pipelines from the pearlitic and austenitic steels on nuclear power plants. Main provisions.
OST 36-128-85: mounting Devices and assemblies. Calculation and design Methods.
OST 36-39-80: Steel technological pipelines made of carbon and alloy steels for pressure Ру up to 9.81 MPa (100 kgf / cm2). Shielded manual metal arc welding. Typical technological process.
OST 36-58-81: Steel building structures. Welding. Basic requirements.
OST 36-60-81: Welding at installation of steel building constructions. Main provisions.
OST 36-62-81: Hoisting equipment. General technical requirements.
OST 37.002.0444-77: Assembly units and fastening parts of overhead conveyors to the supporting metal structures. Construction and dimensions
OST 45.85-96: Wooden and metal shelf stands for electric power storages applied by telecommunication enterprises. General requirements.
OST 5 9137-83: Welding of casting defects in steel and cast iron. Technical requirements
OTU 3-01: Vessels and apparatuses. General specifications for the repair of buildings
PB 03-108-96: Process pipeline design and safe operation rules
PB 03-164-97: Standards for Fabrication of Steam and Hot-Water Boilers, Pressure Vessels, and Steam and Hot Water Piping by Welding
PB 03-384-00: Rules for design, manufacture and acceptance of steel welded vessels and apparatus
PB 08-258-98: Rules for the Construction and Safe Operation of the Main Pipeline for the Transportation of Liquid Ammonia
PB 10-11-92: Installation and Safe Operation Requirements for Hoists (Hoisting Towers)
PB 10-256-98: Regulations on design and safe operation of hoists (derricks)
PGVU 090-93: Dust-gas and air pipelines of thermal power plants. General technical requirements
PGVU 242-92: Round lens compensators for gas and air ducts (DN 200 - 6000 mm). Round single-lens compensator for gas and air ducts
PGVU 243-92: Round lens compensators for gas and air ducts (DN 200 - 6000 mm). Round double compensator for gas and air ducts
PGVU 244-92: Round lens compensators for gas and air ducts (DN 200 - 6000 mm). Three-way round compensator for gas and air ducts
PGVU 245-92: Round lens compensators for gas and air ducts (DN 200 - 6000 mm). Four-sided round compensator for gas and air ducts
PGVU 246-92: Compensator, rectangular single lens for gas and air ducts
PGVU 247-92: Compensator, rectangular two-lens for gas and air ducts
PGVU 248-92: Three-slip rectangular compensator for gas and air ducts
PGVU 249-92: Four-sided rectangular compensator for gas and air ducts
PNAE G-10-031-92: Basic provisions for localizing safety system elements welding on nuclear stations
PNAE G-7-009-89: Equipment and pipelines of nuclear power installations. Welding and overlaying, general provisions
PNST 320-2018: Bearing structures of railway signaling devices. General technical requirements
R 393-80: Recommendations for aluminum metallization of the inner surface of pipes with an outer polyethylene coating and welding of annular joints
RD 059/01-2019: Instructions for welding and surfacing during the repair of freight cars (with Amendment No. 1)
RD 102-002-88: Machines, tools and equipment for pipeline construction. Designing and manufacturing.
RD 10-69-94: Typical technological process of installation electrical equipment. Main provisions.
RD 108.021.112-88: Correction of defects in the cast hull parts of steam turbines and valves by welding without heat treatment
RD 153-006-02: Guidelines for the Welding Process in Construction and Renovation of Trunk Petroleum Pipelines
RD 153-112-014-97: Guidelines on Accident Response and Repair at Petroleum Product Trunk Pipelines
RD 153-112TNP-027-97: Guidelines for Cold-Weather Overhaul of Petroleum Product Pipelines 100-720 mm in Diameter
RD 153-34.0-04.185-2003: Machines and equipment for construction, technical re-equipment and repair of energy facilities. Requirements for design, materials, manufacturing, acceptance and testing
RD 153-34.1-003-01: Welding, heat treatment and control of copper pipe systems and pipelines at power equipment installation and repair.
RD 153-34.1-24.505-98: Recommended Practice for Selection of Injectors for Supplying Water Spray in Fuel Pulverizing Systems in Order to Quickly Reduce the Temperature of the Dust-Gas-Air Mixture in Emergencies
RD 153-39.4-075-01: Rules of maintenance overhaul of oil-trunk pipeline at waterway, railway and category I-IV highway crossings.
RD 22-158-86: Shovel hydraulic excavators. Work equipment. Calculation of metal structures for static strength
RD 22-16-2005*: Guiding regulatory material. Hoisting machines. Selection of materials for the manufacture, repair and reconstruction of welded steel structures
RD 24.031.15-88: Methodological instructions. Designing stationary boilers steelworks.
RD 24.090.52-90: Lifting-transport machines. Materials for welded metal structures.
RD 26.260.12-99: Service life extension of liquid carbon dioxide vessels. Instructional guidelines.
RD 26-02-63-87: Technical requirements for designing and manufacturing of vessels, vehicles and technological blocks installations of oil and gas, operating environments, causing hydrogen sulphide stress corrosion cracking.
RD 26-02-80-2004: The leading document. Welded coils for pipe furnaces. Requirements to design, production and delivery.
RD 26-17-049-85: Organization of storage, preparation and control of welding materials
RD 26-3-86: Procedural Guidelines for Extending the Service Life of Tanks for Liquid Carbon Dioxide
RD 2-97: Regulations on the system for the technical diagnosis of autoclaves in the production of building materials
RD 31.1.02-04: Rules of technical operation of lifting and transport equipment of sea trading ports
RD 31.44.01-97: Rules of technical operation of lifting and transport equipment of sea trading ports
RD 31.44.05-80: Crane metalwork. Repairs. Technical specifications
RD 31.52.21-88: Recommendations on selection of welding materials in enterprises of Ministry of Marine.
RD 31.52.23-89: Ship diesel engines. Restoring cylinder covers using welding. Typical Processes
RD 31.55.03.07-86: Restoration of cast-iron diesel pistons D100 surfacing. Typical Processes
RD 32 TsV 052-2005: Repair of freight car trucks
RD 34 02.028-2007: Technical rules. Mechanical equipment and special steel structures for hydraulic structures. Manufacturing, installation and acceptance.
RD 34.10.351: Specified Quantity Allowances for Materials for Repair of Turbine Generators
RD 34.10.353: Specified Quantity Allowances for Materials for Repair of Electric Motors
RD 34.10.354-88: Transformers Consumption of materials for repair
RD 34.15.027-93: Welding, Heat Treatment, and Testing of Boiler Tube Systems and Piping During Installation and Repair of Electric Supply Station Equipment (RTM-1s-93)
RD 34.15.132-96: Welding and Quality Control of Welded Joints in Metal Structures of Buildings During Construction of Industrial Facilities
RD 34.17.203-76: Technological guidelines for the use of mechanized methods of welding with flux-cored wires in the manufacture and installation of steel structures and non-standard equipment in the construction of thermal power plants
RD 34.17.310-96: Welding, Heat Treatment, and Inspection During In-Service Repair of Welded Joints in Boiler Tubing Systems and Steam Lines
RD 34.26.203: Guidelines for Brick Lining Work During Installation of Boiler Plants and Energy Facilities
RD 34.26.603: Guide to Use of Scaffolding and Cradles for Steam Boiler Repair
RD 34.27.201: Technical Requirements for the Fabrication, Installation, and Corrosion Protection of Ash Collector with Venturi Tube Type MV
RD 34.46.201-84: Instructions for transporting transformers by rail
RD 34.46.605: Transformers at Voltage of 110-1150 kV, with Power of 80 MVxA and Above
RD 36-62-00: Hoisting equipment. General technical requirements.
RD 38.13.004-86: Operation and repairs of process pipelines operating under pressure up to 10.0 MPa (100 kgf/cm2)
RD 39-0147014-535-87: Instructions for welding at installation and repair of pipelines and critical metal structures in organizations and enterprises of the Ministry of oil and gas industry.
RD 39-0147103-330-86: Guidelines for Welding Patches and Couplings to Walls of Petroleum Pipelines Operating Under Pressure up to 2.0 MPa
RD 39-0147103-360-89: Instructions for the safe conduct of welding in the repair of oil and product pipelines under pressure
RD 39-110-91: Main pipeline accident and damage elimination instructions
RD 39-132-94: Regulations for Operation, Inspection, Repair and Rejection of the Field Pipelines 1994
RD 50:48:0075.02.05: Platform buffers. Recommendations for design, construction and operation
RD OP.42-001-85: Main provisions for welding and control of the NPP tanks (reservoirs)
RD RTM 26-07-246-80: Design, manufacturing and control regulations for steel pipeline fittings welded joints.
RDI 26-15-80: Instructions for making inner vessels of isothermal tanks for liquefied carbon dioxide
RM 4-249-91: Process automation systems. Device grounding networks. Allowance for the BCH 205-84/MMSS USSR
RM 4-264-92: Automation systems. Recommendations for the design of steel structures for wiring and installation of automation equipment
RMK 11-87: Temporary guidelines for the design of process piping heating systems with hot water, steam and steam condensate
RSN 342-86: Technology for reinforcing building structures in reconstructed enterprises
RST RSFSR 687-83: Cylinders. Repair and technical certification. Rules of repair and examination
RTM 108.940.08-85: Welded structures of power equipment. General requirements for structural and process design
RTM 393-94: Technical Guides for welding and quality control of the joints of reinforcement and embedded items of concrete elements
RTM 75-95: Process Guidelines for Factory Production of Prefabricated Prestressed Reinforced Concrete Structures -
RU 34-1203-71: Guidelines for the design of dust and air ducts of boiler units
Rules on the Selection of Pressure Vessels and Equipment: Instruction on the selection of pressure vessels and devices operating under pressure of 100 kgf/cm2 and overpressure protection, Ministry of Petroleum Energy
SA 03-005-07: Industrial pipelines of oil-refining, petrochemical and chemical industry. Requirements to configuration and operation
SN 393-78: Instructions for welding of reinforcement joints and embedded parts of reinforced concrete structures
SNiP 3.03.01-87: Bearing and enclosing structures
SNiP II-45-75: Main pipelines
SP 16.13330.2011: Steel structures
SP 294.1325800.2017: The construction of steel. Design rules
SP 34-116-97: Instructions For Design, Construction and Redesign of Field Oil and Gas Pipelines
SP 346.1325800.2017: Systems of gas air treatments of boiler installations 150 Mw. Rules of design
SP 35.13330.2011: Bridges and pipes. Updated living edition of SNiP 2.05.03-84
SP 36.13330.2012: Trunk pipelines
SP 42-102-2004: Design and construction of gas pipelines from metal pipes. To replace SP 42-102-96
SP 53-101-98: Manufacturing and quality control of steel structures for construction
SP 53-102-2004: General rules for steel structure design
SP 70.13330.2012: Bearing and enclosing structures. Updated living edition of SNiP 3.03.01-87
ST RK 1454-2005: Air reservoir for traction railway stock. Basic requirements for structure
ST TsKBA 025-2006: Pipe fittings. Welding and quality control of welded joints. Technical requirements
ST TsKBA 089-2010: Pipe fittings. Welding defects castings. Technical requirements
STB 1026-2008: Section metal railing for bridges and overpasses. Technical conditions
STO 95 12005-2017: Objects of use of atomic energy. Concrete work in the construction of the protective shell of the reactor installation of nuclear power plants. Basic requirements and quality control organization
STO-SA-03-002-2009: Rules for the design, manufacture and installation of vertical cylindrical steel tanks for oil and oil products
TR 94.03.2-99: Standard Procedure for Operational Quality Control of Construction, Installation, and Military Construction Work During Construction of Buildings and Structures. 03.2: Construction of Super-Structures Made from Precast Reinforced Concrete Elements
TTK K-1-20: Arrangement of pile bases for towers of high voltage power lines 35-500 kV
TU 102-107-76: Boxes of unified with hinged panels of BNP type (construction part of block-boxes)
TU 102-199-78: Therapeutic and prophylactic unit for hot dry baths
TU 102-237-85: Mobile buildings (inventory) of the block of the "Watch" system. Group specifications
TU 102-314-81: Boxing unified for production and auxiliary buildings of land objects of the oil and gas industry
TU 102-360-85: Aluminum aluminum masts for radio relay communication type MAP
TU 102-377-84: A set of elements for mobile (inventory) collapsible buildings of the structural construction system SKZ-M. Group specifications
TU 102-416-86: Garage reinforced concrete prefabricated for individual use
TU 102-461-88: Garage reinforced concrete prefabricated box single and double row collective use
TU 102-533-89: A set of structures on a building without a crane with arched span of 12, 15 and 18 m
TU 102-587-91: Production-auxiliary box
TU 102-59-75: Building part of unified block-boxes with hinged BNP panels
TU 102-69-75: Unified inventory blocks for one- and two-story buildings of the watch-keeping villages
TU 102-84.3-87: Garage reinforced concrete prefabricated box with two floors for collective use
TU 22-3193-75: Cell air filters of type FN, FNR, FNP, FNP. Technical conditions
TU 24.08.1702-91: OZS-4 brand electrodes
TU 24-09.411-82: Special electric bridge cranes
TU 24-09-613-84: Electric overhead traveling cranes with a lifting capacity of 5 tons of lightweight construction with electric hoist
TU 26-14-100-90: Single cyclones of the type СЦН-40 of the right and left execution. Technical conditions
TU 26-14-99-91: DP-10M smoke exhauster. Technical conditions
TU 34-38-20092-94: High pressure surface heaters for steam turbine regeneration systems. Technical conditions for major repairs
TU 34-38-20135-94: Tubular air heaters of stationary boilers. Technical conditions for major repairs
TU 34-38-20189-94: Gas-oil burners for steam stationary boilers. Technical conditions for major repairs
TU 34-38-20190-94: Burner, types pulverized steam stationary boilers. Technical conditions for major repairs
TU 34-38-20191-94: Headset stationary boilers. General technical conditions for major repairs
TU 34-38-20195-94: Fuel oil heaters of PM and PMR types. Technical conditions for major repairs
TU 34-38-20196-94: Steam heaters, water-water heat exchangers. Technical conditions for major repairs
TU 35-1757-87: Buildings spanning railway bridges with riding on top on the ballast of box section Lp = 33.6 m; 45.0 m. Specifications
TU 36.1395905-016-96: Three-layer frame panels with steel facings and mineral wool insulation
TU 36-1395905-015-95: A set of structures of buildings of arched type. Technical conditions
TU 36-2009-77: Steel structures of steel vertical cylindrical tanks with a capacity from 100 to 20,000 m3 for the storage of oil and oil products. Technical conditions
TU 3680-001-04698606-04: Pipe Support
TU 4112-091-00220302-2005: Steel castings for equipment of oil refineries and petrochemical plants
VMU 50:48:0075-02-02: Platform buffers. General requirements for design, construction and operation
VSN 005-88: Construction of field steel pipelines Technology and arrangement
VSN 006-89: Construction Of Main And Field Pipelines Welding
VSN 009-88: Construction of main and commercial pipelines. Means and installations of cathodic protection.
VSN 07-81/Minoborony: Technical rules of quality control and acceptance of installation work at the facilities of the Ministry of Defense
VSN 136-78/Mintransstroj: Instructions for the design of auxiliary structures and devices for the construction of bridges
VSN 16-89: Industry-Specific Specified Quantity Allowances for Materials. Drilling and Blasting Operations
VSN 169-80: Guidelines for Using Manual and Automated Welding in Shop-Fabrication of Structural Steel Components for Bridges
VSN 170-80: Guidelines for Erection of 16-Story Large-Panel Residential Buildings Assembled From Standardized Products Listed in the Uniform Catalog Series P44/16, Erected by DSK-1
VSN 200-83: Work Execution Guidelines for Substructure Construction for High-Rise Residential Buildings
VSN 202-90: Guidelines for Erection of 22-Story Large-Panel Residential Buildings Assembled From Modular Preassembled Elements (KOPE-85), Erected by DSK-2
VSN 2-120-80/Minneftegazstroj: Instructions on the technology for welding pipelines and technological equipment during the installation of compressor and pumping stations
VSN 34-91/MT-st: Execution and Acceptance Requirements for New Construction, Rehabilitation, and Expansion of Existing Marine and River Hydraulic Transport Structures. Part I: Part II: Part III
VSN 349-87: Welding of Galvanized Steel Ribbed Roof Decks for Light-Weight Roofing
VSN 408-79: Installation Guidelines to Air Cooling Apparatus
VSN 41.88: Design of ice-resistant stationary platforms
VSN 415-81: General Specified Quantity Allowances for Building Materials. Compendium 19: Installation of Domestic Heating, Water Supply, Drainage, and Gas Supply Systems
VSN 427-81: Guidelines for Welding Structural Steel Using Welding Wire PPB-5
VSN 433-82: Guidelines for Semi-Automatic Flux-Core Wire Welding of Assembly Connections of Steel Structures for Factory and Industrial Buildings and Structures
VSN 467-85: General Specified Quantity Allowances for Building Materials. Compendium 7: Installation of Metal Structures for Tanks and Gasholders
VSN 70-79: Guidelines for the Installation and Testing of Piping with Nominal Bore of up to 400 mm (inclusive) in Diameter Operating at Pressures over 9.8 MPa to 245 MPa (over 100 kgf per sq.m to 2500 kgf per sq.m)
Customers Who Viewed This Item Also Viewed:
 |
Unified system for design documentation. Types and sets of design documentation
Language: English |
Loads and impacts
Language: English |
Vessels and Apparatus. Norms and methods of strength calculation from wind loads, seismic influence and other external loads
Language: English |
Articulated connector devices with cast male and female parts for freight cars of articulated type. General technical specifications
Language: English |
 |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.