imgalt

RD 50:48:0075.03.05

РД 50:48:0075.03.05

Recommendations for the design and safe operation of elevated crane tracks

Рекомендации по устройству и безопасной эксплуатации надземных крановых путей

Status: Effective

Recommendations apply to buildings and structures of hazardous production facilities with steel, reinforced concrete and other supporting structures of supporting and overhead lifting cranes of operating modes 1A-8A according to GOST 25546 for seismic and non-seismic areas.

Рекомендации распространяются на здания и сооружения опасных производственных объектов со стальными, железобетонными и другими несущими конструкциями опорных и подвесных грузоподъемных кранов режимов работы 1А-8А по ГОСТ 25546 для сейсмических и несейсмических районов.

Choose Language: 
Format: Electronic (pdf/doc)

Approved: NPC Way To, 9/25/2002

SKU: RUSS165323

Price: $2,074.00



imgalt

The Product is Contained in the Following Classifiers:

Construction (Max) » Reference documents » Policy letters, regulations, recommendations, etc. »

PromExpert » SECTION IV. INDUSTRIAL SAFETY » II Industrial safety requirements for operation of a hazardous production facility » 2 Special industrial safety requirements for operation of a hazardous production facility » 2.7 Industrial safety requirements for hoisting facilities »

PromExpert » SECTION III. LABOR PROTECTION AND SAFETY » III Occupational safety requirements for production equipment and processes » 2 Safety requirements for certain types of work » 2.8 Operation and maintenance of lifting machines, mechanisms and elevators »

ISO classifier » 53 LIFTING AND TRANSPORT EQUIPMENT » 53.020 Lifting equipment » 53.020.20 Cranes »


The Document References:

GOST 5264-80: Manual arc welding. Welding joints. Main types, design elements and dimensions

GOST 10060-87: Concretes. Methods of frost resistance determination

GOST 10180-90: Concretes. Methods for strength determination using reference specimens

GOST 10528-90: Geodetic levels

GOST 10529-96: General specifications

GOST 10629-88: Prestressed reinforced concrete sleepers for 1520 mm gauge railways. Specifications

GOST 10922-90: Welded reinforcing products and inserts, welded joints of reinforcement and inserts for reinforced concrete structures. General specifications

GOST 11371-78: Washers. Specifications

GOST 11530-93: Rail joint bolts. Specifications

GOST 11532-93: Nuts for rail joints. Specifications

GOST 12.4.026-76: Signal colors and safety signs

GOST 12135-75: The plates of spike fastening for railway P50 rails. Design and dimensions

GOST 12730.0-78: Concretes. General requirements for methods of determination of density, moisture content, water absorptions porosity and watertightness

GOST 12730.5-84: Concretes. Methods for determination of water tightness

GOST 13015.0-83: Prefabricated concrete and reinforced concrete constructions and products. General technical requirements

GOST 13015.1-81: Prefabricated concrete and reinforced concrete constructions and products. Acceptance

GOST 13015.2-81: Prefabricated concrete and reinforced concrete constructions and products. Marking

GOST 13015.3-81: Prefabricated concrete and reinforced concrete constructions and products. Quality certificate

GOST 13015-2003: Concrete and reinforced concrete products for construction. General technical requirements. Rules for acceptance, marking, transportation and storage

GOST 13837-79: General purpose dynamometers

GOST 14782-86: Nondestructive testing. Welded joints. Ultrasonic methods

GOST 16210-77: Railway rails type P75. Design and dimensions

GOST 166-89: Vernier callipers. Specifications

GOST 17624-87: Concrete. Ultrasonic method of strength determination

GOST 17625-83: Reinforced concrete structures and units. Radioactive method of determination of concrete protective covering thickness, reinforcement dimensions and arrangement

GOST 18105-86: Concretes. Rules for the strength control

GOST 19115-91: Railway lock washers. Specifications

GOST 19127-73: Double-headed fish plates for P43 rails. Design and dimensions

GOST 19281-89: Rolled steel with increased strength. General specifications

GOST 19282-73: Low-alloyed plate strip universal steel. Specifications

GOST 19425-74: Special-purpose steel I-beams and channels. Dimensions

GOST 2.103-68: Unified system for design documentation. Stages of designing

GOST 2.106-96: Unified system for design documentation. Text documents

GOST 2.701-84: Unified system design documentation. Diagrams. Kinds and types. General requirements for fulfilment

GOST 20287-91: Petroleum products Method of test for flow point and pour point

GOST 20-85: Rubber-fabric conveyor belts

GOST 22362-77: Reinforced concrete structures. Methods for determination of reinforcement tensioning force

GOST 22690-88: Concretes. Determination of strength by mechanical methods of nondestructive testing

GOST 22904-93: Reinforced concrete structures. Magnetic method for determining the thickness of the protective layer of concrete and the location of reinforcement

GOST 23009-78: Prefabricated concrete and reinforced concrete constructions and products. Symbols (marks)

GOST 23121-78: Steel crane-runway beams for general-purpose overhead travelling electric cranes of 50 t load-carrying capacity

GOST 23407-78: Fencings for building sites. Specifications

GOST 23831-79: Rubber coated fabric flat drive belts. Specifications

GOST 23858-79: Welded joints butt and T-formed of reinforcement steel bars. Ultrasonic methods of quality inspection. Acceptability requirements

GOST 24741-81: Joint for connection of crane rails to steel crane girders. Specifications

GOST 25546-82: Hoisting cranes. Work conditions

GOST 25628-90: Reinforced concrete columns for single-storey industrial buildings. Specifications

GOST 25706-83: Magnifiers

GOST 2591-88: Square Hot-rolled Steel Bars Dimensions

GOST 26134-84: Concretes. Ultrasonic method of frost resistance determination

GOST 26433.0-85: System of ensuring geometrical parameters accuracy in construction. Rules of measurement. General

GOST 26433.1-89: System of ensuring geometrical parameters accuracy in construction. Rules of measurement. Prefabricated elements

GOST 3242-79: Welded joints

GOST 3749-77: Checking 90° squares. Specifications

GOST 380-94: Normal quality carbon steel

GOST 4121-76: Crane rails. Specifications

GOST 4121-96: Crane rails. Specifications

GOST 4133-73: Fishplates for wide gauge railway track

GOST 427-75: Measuring metal rules. Basic parameters and dimensions. Specifications

GOST 534-78: Overhead traveling cranes spans

GOST 5915-70: Hexagon nuts, product grade B. Construction and dimensions

GOST 7173-54: Railway rails type Р43 for industrial conveyance and hoisting lines. Construction and dimensions

GOST 7174-75: Railway rails type Р50. Construction and dimensions

GOST 7502-98: Measuring metal tapes. Specifications

GOST 7512-82: Nondestructive testing. Welded joints. Radiography method

GOST 7798-70: Hexagon bolts, product grade B. construction and dimensions

GOST 8.002-86: State system for ensuring the uniformity of measurements. State supervision and department control of measuring instruments. Basic regulations

GOST 8.513-84: State system for ensuring the uniformity of measurements. Verification of measuring instruments. Organization and procedure

GOST 8026-92: Levelling rules. Specifications

GOST 8161-75: Railway rails type Р65. Construction and dimensions

GOST 8193-73: Double headed fish plates for Р65, Р75 rails. Design and dimensions

GOST 8239-89: Steel hot-rolled I-beams

PB 03-246-98: Rules for audit of industrial safety

PB 10-382-00: Rules of hoisting crane structure and safe operation. Series 10. Revision 7.

RD 10-138-97: Thorough Inspection of Rail Crane Tracks of Hoisting Machinery. Part 1: General Provisions. Procedural Guidelines

RD 10-528-03: Regulation on the examination of industrial safety of hazardous production facilities that use lifting equipment

SNiP 12-03-99: Occupational safety in construction part one. General safety requirements

SNiP 2.03.11-85: Corrosion protection of buildings structures

SNiP 3.03.01-87: Bearing and enclosing structures

SNiP III-18-75: Steel structures. Regulations on execution and acceptance of work.

VMU 50:48:0075-02-02: Platform buffers. General requirements for design, construction and operation

The Document is Referenced By:

Letter 09-00-06/7312: On the operation of the SAR

Customers Who Viewed This Item Also Viewed:

imgalt imgalt
Limit dimension deviation from 0,1 to 10000 mm and surface shape and arrangement allowances, not specified on drawings.
Language: English
Price: $1,060.25
imgalt
Vessels and apparatus. Norms and methods of strength calculation. General requirements
Language: English
Price: $178.00
imgalt
Norms of structural design of nuclear power plants with reactors of different types
Language: English
Price: $12.00
imgalt
Mineral fertilizers. Method for determination of dynamic strength and attrition
Language: English
Price: $41.00
imgalt
Diesel fuel EURO. Specifications
Language: English
Price: $233.00
imgalt
Inch thread with a profile angle of 55 degrees
Language: English
Price: $121.00
imgalt

YOUR ORDERING MADE EASY!

RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.

Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.

We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.

Placing Your Order

Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).

Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.

For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.

For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.

Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.

Your Order Best Quality and Authenticity Guarantee

Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).

We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.

We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.

All Codes and Regulations

All Categories

Send us a message Expand Collapse

Leave your message in the form below, and we will write back by e-mail!