imgalt

GOST 9454-78

ГОСТ 9454-78

Metals. Method for testing the impact strength at the low, room and high temperature

Металлы Метод испытания на ударный изгиб при пониженной, комнатной и повышенной температурах

Status: Effective - Supersedes. The limitation of the effectiveness period has been lifted: Protocol No. 3-93 of the IGU dated 03.03.93 (IUS 5-6-1993)

The standard applies to ferrous and non-ferrous metals and alloys and establishes a test method for impact bending at temperatures from minus 100 to plus 1200 ° C.

Стандарт распространяется на черные и цветные металлы и сплавы и устанавливает метод испытания на ударный изгиб при температуре от минус 100 до плюс 1200 °С.

Choose Language: 
Format: Electronic (pdf/doc)

Approved: State Committee of Standards of the Council of Ministers of the USSR, 4/17/1978

SKU: RUSS16543

Price: $102.00

English keywords: mechanical testing of metals;


imgalt

The Product is Contained in the Following Classifiers:

Construction (Max) » Standards » Other state standards used in construction » 77 Metallurgy »

Evidence base (TR CU, Technical Regulation of the Customs Union) » 001/2011 TR TS. On safety of railway rolling stock » Regulations and standards (to TR CU 001/2011) »

Evidence base (TR CU, Technical Regulation of the Customs Union) » 003/2011 TR TS. On safety of railway infrastructure » Regulations and standards (for TR CU 003/2011) »

Standards for pipe fittings (TPA) » 10. Production » 10.8 Material Testing »

Standards for pipe fittings (TPA) » 9. Materials for piping valves (TPA) » 9.1 Metals »

PromExpert » SECTION I. TECHNICAL REGULATION » V Testing and control » 2 Tests for external factors » 2.2 Testing of manufacturing products »

ISO classifier » 77 METALLURGY » 77.040 Metal Testing » 77.040.10 Mechanical testing of metals »

National standards » 77 METALLURGY » 77.040 Metal Testing » 77.040.10 Mechanical testing of metals »

National Standards for KGS (State Standards Classification) » Latest edition » V Metals and metal products » V0 General rules and regulations on metallurgy » V09 Test methods. Packaging. Marking »

National Standards for OKSTU » PRODUCTS OF ELECTRODE AND CARBIDE INDUSTRY. PRODUCTS FROM NON-FERROUS METALS » Control methods (testing, analysis, measurements) »


As a Replacement Of:

GOST 9454-60: Metals. Method for determination of impact strength at normal temperature

GOST 9455-60: Metals. Method for determination of impact strength at low temperature

GOST 9456-60: Metals. Method for determination of impact strength at high temperature

The Document References:

GOST 10708-82: Pendulum impact machines

GOST 166-89: Vernier callipers. Specifications

GOST 577-68: Clock-type dial indicators graduated in unit divisions of 0,01 mm. Specifications

GOST 7564-97: Rolled products general rules of samples, rough specimens and test pieces selection for mechanical and technological testing

GOST 7565-81: Iron, steel and alloys. Sampling for determination of chemical composition

GOST 9293-74: Gaseous and liquid nitrogen. Specifications

The Document is Referenced By:

DiOR 05: Methodology of diagnosing of technical condition and determining of residual life of process equipment of oil refineries and petrochemical plants

FTS ZhT TsT 020-99: Federal certification requirements for rail transport. Technical rules. Brake disks of railcar rolling stock. Certification requirements

FTS ZhT TsT 028-99: Brake block holders of the locomotives for main-line railways. Certification requirements

FTS ZhT TsT 085-2002: Locomotives and wagon rolling stock. Center wheel clean. Certification requirements

GOST 10411-74: Axles for diesel locomotives of narrow gauge railways. Technical requirements

GOST 10494-80: Studs for flanged connections with lens-shaped seals for pn - 10-100 MPa (100-1000 kgf/sq sm). Technical requirements

GOST 10495-80: Hexagon nuts for flange joints for pn above 10 to 100 MPa (above 100 to 1000 kgf/cm2)

GOST 1050-2013: Metal products from nonalloyed structural quality and special steels. General specification

GOST 1050-88: Carbon structural quality steel gauged bars with special surface finish. General specifications

GOST 10674-2022: Tank wagons. General specifications

GOST 10705-80: Electrically welded steel tubes. Specifications

GOST 10706-76: Electrically welded steel line-weld tubes. Technical requirements

GOST 10791-2004: All-rolled wheels. Specifications

GOST 10791-2011: All-rolled wheels. Specifications

GOST 10791-89: Solid rolled wheels

GOST 10884-81: Heat strengthened steel bars of periodical section for concrete reinforcement. Technical requirements

GOST 10885-85: Hot-rolled two-ply corrosion-resistant steel sheets

GOST 10935-2022: Covered freight cars. General specifications

GOST 11269-76: Universal rolled plates and wide strips made of special purpose structural high-grade Alloy steel

GOST 11447-80: Locking studs for Py 10-100 MPa (100-1000 kgf/cm2). Technical requirements

GOST 11530-2014: Rail joint bolts. Specifications

GOST 11530-93: Rail joint bolts. Specifications

GOST 12.2.063-2015: Pipeline valves. General safety requirements

GOST 12.2.073-82: Occupational safety standards system. Pressure-operated vessels. Bolts, studs and nuts. Technical requirements

GOST 12247-80: Large seamless steel gas cylinders for operating pressure of 31,4 and 39,2 MPa (320 and 400 kgf/cm sq.). Specifications

GOST 12393-2013: Line fittings for overhead system of railways. General common requirements

GOST 12393-2019: Rail contact network fittings linear. General specifications

GOST 13585-68: Steel. The bead method for determining the allowed welding and building procedures.

GOST 13663-86: shaped steel pipes technical requirements

GOST 13877-80: Sucker rods and couplings

GOST 13877-96: Sucker rods and sucker rod couplings. Specifications

GOST 14119-85: Rods from precision alloys for elastic elements

GOST 1414-75: Construction steel with enhanced and high machinability

GOST 14637-79: Rolled thick-plate and wide-band universal of carbon steel for general use. Specification

GOST 14637-89: Thick sheet rolled stock of normal quality carbon steel

GOST 14959-2016: Spring nonalloy and alloy steel product. Specifications

GOST 1577-2022: Heavy-gauge plates and wide strips of structural quality steel. Technical specifications

GOST 1577-81: Rolled sheets and wide strips of structural quality steel. Specifications

GOST 1577-93: Plate and broadband roll stock of construction fine steel.

GOST 17032-2010: Horizontal steel tanks for petroleum products. Specifications

GOST 17380-2001: Carbon and low-alloy steel butt-welding fittings. General specifications

GOST 17380-83: Seamless welded steel pipeline components for Pn £ 10 MPa (£ 100 kgf/cm2). Specifications

GOST 1759.4-87: Bolts, screws and studs. Mechanical properties and test methods

GOST 18267-82: Railway rails, types р50, р65, and р75 for wide-gage railways, heat-treated by through hardening in oil

GOST 18968-73: Corrosion-resistant and high temperature steel rods and strips for steam turbine blades

GOST 19191-73: Rigging screws with automatic stopping. Specifications

GOST 19281-2014: High strength rolled steel. General specification

GOST 19281-73: Low alloyed sorted and shaped steel

GOST 19281-89: Rolled steel with increased strength. General specifications

GOST 19282-73: Low-alloyed plate strip universal steel. Specifications

GOST 19442-74: Shaped bars for blades and bars for blade coupling of steam turbines made of corrosion-resistant and high-temperature steel

GOST 19755-84: Sealing metal conical gaskets for closed gates. Specifications

GOST 20072-74: Heat-resistant steel

GOST 20295-74: Steel welded pipes for main gas and oil pipelines

GOST 20295-85: Welded steel pipes for gas and oil pipelines. Technical specifications

GOST 20700-75: Bolts, studs, nuts and washers for flanged and anchor connections, corks and yokes with medium temperature from 0 to 650 °C. Specifications

GOST 2105-75: Forged and swaged hooks. Technical requirements

GOST 21357-87: Castings made of cold- and wear- resistant steel

GOST 21945-76: Seamless hot-rolled pipes from titanium-based alloys

GOST 22253-76: Friction draft gears for 1520 mm gauge railway rolling stock. Specifications

GOST 22356-77: High strength bolts and nuts аnd washes. General specifications

GOST 22703-2012: Molded parts of coupler and automatic coupler devices of railway rolling stock. General specifications.

GOST 22703-91: Moulded pieces of automatic coupler equipment for 1520 mm gauge railway rolling stock. General specifications

GOST 22790-83: Assembly units and pipelines components, designed for рnom over 10 to 100 MPa (from 100 to 1000 kgf/cm2). General specifications

GOST 22790-89: Assembly units and pipelines components, designed for рnom over 10 to 100 MPa (from 100 to 1000 kgf/cm2)

GOST 22848-77: Metals. Method for testing the impact strength at temperature from -100 up to -269 °C

GOST 228-79: Anchor chains

GOST 23046-78: Brazing and soldering joints. Method of impact tests

GOST 23240-78: Welding structure. Method of estimation the brittle failure by reaction on arc welding burn

GOST 23304-78: Bolts, studs, nuts and washers for flanged connections for atomic power plants. Technical requirements. Acceptance. Test methods. Marking, packing, transportation and storage

GOST 23570-79: Rolled carbon steel welded for building metal structures. Specification

GOST 23705-79: Hot-rolled and forged high-temperature alloy bars

GOST 23755-79: Plates of titanium and titanium alloys. Specifications

GOST 23870-79: Weldability of steels. Test method for evaluation of fusion welding effect on parent metal

GOST 23979-2018: Subs for casing and tubing. Specifications

GOST 24648-90: Pig iron for castings. Sampling and making the specimen for mechanical testing.

GOST 24982-81: Sheets of corrosion-resistant, heat-resistant and high-temperature alloys

GOST 25054-81: Forgings made of corrosion-resistant steels and alloys

GOST 25573-82: Freight handling rope slings for construction

GOST 25996-97: Round link high-tensile chains for mining equipment. Specifications

GOST 26131-84: Heat-resisting steel forgings. General specifications

GOST 26492-85: Titanium and titanium alloys rolled bars. Specifications

GOST 26496-85: Hydraulic accumulators. Acceptance rules and test methods

GOST 26528-85: Powder materials. Impact test method

GOST 26528-98: Sintered metal materials, excluding hard metals. Impact test method

GOST 26686-2022: Flatcars. General specifications

GOST 26725-2022: Open wagons. General technical conditions

GOST 27321-2018: Demountable tubular scaffold for constructional works. Specifications

GOST 27321-87: Demountable tubular scaffold for construction works. Specification.

GOST 27772-2015: Structural steel structure rolled products. General specifications

GOST 27772-88: structural steel structure rolled products. General specifications

GOST 27834-88: Tool joints for drill pipers. Specifications

GOST 27834-95: Tool joints for drill pipes. Specifications

GOST 30245-2012: Steel bent closed welded square and rectangular section for building. Specifications

GOST 30272-96: Black collar axles (profile stock) for 1520 mm gauge railways. Specifications

GOST 30415-96: Steel. Non-destructive testing of mechanical properties and microstructure of steel products by magnetic method

GOST 30432-96: Metal tubes. Selection of samples, tube stocks and specimens for mechanic and technological tests

GOST 30456-2021: Metal products. Steel pipes, rolled steel plates and coils. Falling load impact test method

GOST 30563-98: Seamless cold-worked carbon and alloy steel tubes for special purposes. Specifications

GOST 30564-98: Seamless hot-worked carbon and alloy steel pipes and tubes with special properties. Specifications

GOST 30565-98: Hot-rolled steel shapes for machine-Building in chemical engineering and oil industry. General specifications

GOST 30768-2001: Control head oil field equipment. Test methods

GOST 30776-2002: Oil field mobile pumping units. General specifications

GOST 30803-2002: Transmission tooth gears of the traction main railway stock . Specifications

GOST 30803-2014: Transmission tooth gears of the traction railway stock. Specifications

GOST 31334-2007: Axles for rolling stock of 1520 mm gauge railways. Specifications

GOST 31373-2008: Wheelsets of locomotives and motor-powered units. Strength calculations and tests

GOST 31385-2008: Vertical cylindrical steel tanks for oil and oil-products. General specifications

GOST 31385-2016: Vertical cylindrical steel tanks for oil and oil-products. General specifications

GOST 31443-2012: Steel pipes for crafts pipelines. Specifications

GOST 31447-2012: Steel weldes pipes for trunk gas pipelines, oil pipelines and oil products pipelines. Specifications

GOST 31841-2012: Petroleum and natural gas industries. Well service equipment. General technical requirements

GOST 31844-2012: Petroleum and natural gas industries. Drilling and production equipment. Hoisting equipment. General technical equipments

GOST 32400-2013: Molded side frame and bolster beam of вogies for railway freight wagons. Specifications

GOST 32484.1-2013: High-strength structural bolting assemblies for preloading. General requirements

GOST 32484.3-2013: High-strength structural bolting assemblies for preloading. System HR - Hexagon bolt and nut assemblies

GOST 32484.4-2013: High-strength structural bolting assemblies for preloading. System HV - Hexagon bolt and nut assemblies

GOST 32528-2013: Hot-deformed seamless steel pipes. Specifications

GOST 32578-2013: Cranes. Metal structures. Requirements for materials

GOST 32601-2013: Centrifugal pumps for petroleum, petrochemical and natural gas industries. General technical requirements

GOST 32601-2022: Centrifugal pumps for oil, petrochemical and gas industry. General technical requirements

GOST 32678-2014: Pipes steel seamless and welded cold-bent for general purpose. Specifications.

GOST 3281-93: Axles for 1520 (1,524) mm gauge railway locomotives

GOST 32931-2015: Profile steel pipes for metal constructions. Specifications

GOST 33005-2014: Oil and gas industry. Drilling and production equipment. Connections of marine drilling risers. General specifications

GOST 33200-2014: Axles for wheelsets of railway rolling stock. General specifications

GOST 33228-2015: Steel welded pipes for general purposes. Specifications

GOST 33229-2015: Tubes for boiler and heat exchanging equipment. Technical specifications. Part 1. Seamless steel pipes to work under pressure not more than 6,4 MPa and at temperatures not exceeding 400 C

GOST 33259-2015: Flanges for valves, fittings and pipelines for pressure to PN 250. Design, dimensions and general technical requirements

GOST 33260-2015: Pipeline valves. Мetals used in pipeline valves production. Basic requirements for choice of materials

GOST 33722-2016: Switches of turnouts. General specifications

GOST 33724.1-2016: Pneumatic brake equipment of the railway rolling stock. Safety Requirements and Inspection Procedures. Part 1. Air distributors, brake valves, brake units, sealing rubber components

GOST 33796-2016: Railway multiple units. Durability and dynamics requirements

GOST 33852-2016: Pipeline valves. Knife gate valves for trunk pipelines. General specifications

GOST 33986-2016: Automotive vehicles. High-pressure cylinders for compressed natural gas used as motor fuel. Technical requirements and test methods

GOST 34027-2016: Gas supply system. Gas main pipeline transportation. Mechanical safety. Assigning of safe operation life for linear part of gas main pipeline

GOST 34029-2016: Pipeline accessories. Check fittings for main oil pipelines and oil product pipelines. General specifications

GOST 34293-2017: Pipeline valves. Metal ball valves for petroleum, petrochemical and allied industries. General specifications

GOST 34347-2017: Steel welded vessels and apparatus. General technical conditions

GOST 34450-2018: Details and assembly units of coupling and automatic coupling devices of railway rolling stock. Test methods

GOST 34458-2018: Articulated connector devices with cast male and female parts for freight cars of articulated type. General technical specifications

GOST 34473-2018: Pipe fittings. Cranes spherical steel all-welded for water thermal networks. General technical conditions

GOST 34568-2019: The main pipeline transport of oil and oil products. Cameras for starting and receiving cleaning and diagnostic tools. General specifications

GOST 34601-2019: Automobile vehicles powered by liquefied natural gas. Cryogenic power systems. Technical requirements and test methods

GOST 34636-2020: Pipe billet. General specifications

GOST 34904-2022: Ship pipeline valves. General specifications

GOST 34939-2023: Locomotives. Requirements for strength and dynamic qualities

GOST 380-71: Common quality carbon steel. Grades

GOST 398-2010: Rough tyres for railway rolling stock. Specifications

GOST 398-81: Carbon steel tires for rolling stock for broad gauge railways. Technical requirements

GOST 398-96: Carbon steel tires for broad gauge railroads and subway rolling-stock

GOST 4008-89: Axles of full gauge railway cars. Specifications

GOST 4041-2017: Hot-rolled thick-rolled for cold stamping from non-alloyed constructional quality steel. Technical conditions

GOST 4041-71: Rolled plates of high quality structural steel for cold stamping

GOST 4491-2016: Cast centers of wheels for railway rolling stock. General specifications

GOST 4491-86: Cast wheel centers for the 1520 mm-gauge railroad rolling stock

GOST 4543-2016: Metal products from structural alloy steel. Specification

GOST 4543-71: Structural alloyed steel

GOST 4728-2010: Axle billets for railway rolling stock. Specifications

GOST 4728-89: Shaft blanks for the rolling stock of the railroads with 1520 mm wide track

GOST 4728-96: Axle billets for the railway rolling stock of 1520 mm gauge

GOST 5058-65: Low-alloy constructional steel. Grades and general technical requirements

GOST 5267.0-90: Hot-rolled sections for car building. General specifications

GOST 5286-2022: Screw-in steel pipe clamps for drill pipes. General technical requirements

GOST 535-2005: Common quality carbon steel bar and shaped sections. General specifications

GOST 535-88: Common quality carbon bar and shaped sections. General specifications

GOST 5422-73: Hot-rolled special steel sections for tractors. Technical specifications

GOST 550-75: Seamless steel tubes for petroleum processing and petrochemical industry. Specifications

GOST 5520-2017: Rolled plate of unalloyed and alloyed steel for boilers and vessels working under pressure. Technical conditions

GOST 5520-79: Carbon, low-alloy and alloy sheet steel for boilers and pressure vessels. Specifications

GOST 5521-86: Weldable steel for shipbuilding

GOST 5521-93: Shipbuilding rolled steel

GOST 5582-75: Corrosion-resistant, heat-proof, and heat-resistant thin-sheet rolled stock

GOST 5781-82: Hot-rolled steel for reinforcement of ferroconcrete structures. Specifications

GOST 5949-2018: Stainless corrosion resisting, heat-resisting and creep resisting steel and alloy on iron-nickel-based products. Specifications

GOST 5949-75: Gauged corrosion-resistant, heat-resistant and high-temperature steel shape

GOST 5973-2022: Dumper cars. General specifications

GOST 631-75: Upset drill pipes with couplings

GOST 6690-83: Axes for metro carriages. Specifications

GOST 6713-75: Low-alloyed structural rolled stock for bridge building. Specifications

GOST 6713-91: Low-alloyed structural rolled stock for bridge building. Specifications

GOST 6996-66: Welded joints. Methods of mechanical properties determination

GOST 7268-82: Steel. Method for determination of ability to mechanical aging by impact bend testing

GOST 7293-85: Cast iron with globular graphite for foundry

GOST 7350-77: Plate, corrosion-resistant, heat-resistant, and high-temperature steel

GOST 7360-2015: Drill-stem subs. Technical specification

GOST 7360-82: Subs for drilling strings

GOST 7370-2015: Railway frogs. Specifications

GOST 7370-86: Railway frogs of types R75, R65 and R50

GOST 7370-98: Railroad frogs of P75, P65 and P50 types. Specifications

GOST 7564-73: Steel. General rules of samples, blanks and test pieces for mechanical and technological tests

GOST 7564-97: Rolled products general rules of samples, rough specimens and test pieces selection for mechanical and technological testing

GOST 7918-75: Tool joints for 50 mm diameter drilling pipes. Specifications

GOST 8142-89: Rail soles for R18, P24, P33 rail types

GOST 8479-70: Structural carbon and alloy steel forgings

GOST 8536-79: Blanks for marine shafts and rudder stocks. Specifications

GOST 8696-74: General-purpose electrically welded spiral seam steel pipes. Specifications

GOST 8733-87: Steel seamless cold-deformed and heat-deformed pipes. Technical specifications

GOST 9.908-85: Unified system of corrosion and ageing protection. Metals and alloys. Methods for determination of corrosion and corrosion resistance indices

GOST 9399-81: Threaded steel flanges for Pn 20-100 MPa (200-1000 kgf/sq sm). Specifications.

GOST 949-73: Small and medium volume steel cylinders for gases for pp ≤ 19.6 MPa (200 kgf/cm2) Specifications

GOST 9731-79: Large capacity seamless steel gas-cylinders for operation pressure 4.5 MPa (250 kgf / cm2)

GOST 977-88: Steel castings. General specifications

GOST ISO 898-1-2014: Mechanical properties of fasteners made of carbon and alloyed steels. Part 1. Bolts, screws and studs with specified property classes with large and small thread pitch

GOST R 50.04.02-2018: Conformity assessment system for the use of nuclear energy. Conformity assessment in the form of testing. Qualification testing of heat treatment processes

GOST R 50.04.04-2018: Conformity assessment system for the use of nuclear energy. Conformity assessment in the form of testing. Qualification testing for technologies of working procedures by pressure

GOST R 50.04.06-2018: Conformity assessment system for the use of nuclear energy. Conformity assessment in the form of testing. Qualification testing for new material (base or welding)

GOST R 50.05.12-2018: Conformity assessment system in the field of atomic energy use. Conformity assessment in the form of control. Monitoring radiation embrittlement of the reactor vessel

GOST R 50.05.17-2019: Conformity assessment system in the field of atomic energy use. Steel castings for equipment and pipelines of nuclear power plants. Control procedure

GOST R 50253-92: Rail joint bolts. Specifications

GOST R 50278-92: Drill pipes with weld-on tool joints. Specifications

GOST R 51045-2014: Rails of ways technological railways transport. General specifications

GOST R 51045-97: Steel rails of PП50, PП65 and PП75 types for industrial tracks. General specifications

GOST R 51161-2002: Sucker rods, mouth stocks and couplings for them. Specifications

GOST R 51161-98: Glass reinforced plastic sucker rods. Specifications

GOST R 51175-98: Transmission tooth gears of the traction main railway stock. Specifications

GOST R 51220-98: Transmission tooth gears of the traction main railway stock. Raw pieces. Technical specifications

GOST R 51245-99: Steel universal drill rods. General specifications

GOST R 51349-99: Floor mounted lift trucks. Load plates, fork. Specifications

GOST R 51365-2009: Petroleum and natural gas industries. Drilling and production equipment. Wellhead and Christmas tree equipment. General specifications

GOST R 51365-99: Control head oil field equipment. General specifications

GOST R 51685-2000: Railway rails. General specifications.

GOST R 51685-2013: Railway rails. General specifications.

GOST R 51753-2001: High pressure cylinders for the compressed natural gas as a fuel for automotive vehicles. General specifications

GOST R 51891-2002: Series 1 freight containers. Corner fittings. Specifications

GOST R 51891-2008: Series 1 freight containers. Fittings. Specifications

GOST R 52079-2003: Steel welded pipes for trunk gas pipelines, oil pipelines and oil products pipelines. Specifications

GOST R 52203-2004: Tubing and coupling. Specifications

GOST R 52627-2006: Bolts, screws and studs. Mechanical properties and test methods

GOST R 52630-2012: Steel welded vessels and apparatus. General specifications.

GOST R 52643-2006: High-strength screws and nuts washers for metal structures. General specifications

GOST R 52664-2010: Welded pipe sheet piles. Specifications

GOST R 52910-2008: Vertical cylindrical steel tanks for oil and oil-products. General specifications

GOST R 52927-2008: Rolled stock of normal, increased- and high-strength steel for shipbuilding. Specifications

GOST R 52927-2015: Rolled of normal, increased - and high-strength steel for shipbuilding. Specifications

GOST R 52942-2008: Railway applications. Axles. Product requirements.

GOST R 53192-2008: Welded steel structures of freight cars. Technical requirements

GOST R 53374-2009: Liquid - propellant rocket engines. General technical requirements for production and quality inspection during supply for use

GOST R 53383-2009: Hot-deformed seamless steel pipes. Specifications

GOST R 53580-2009: Steel pipes for crafts pipelines. Specifications

GOST R 53664-2009: High-strength cheese-head and conical bolts for bridge building. Nuts and washers for them. Specifications

GOST R 53672-2009: Pipeline valves. General safety requirements

GOST R 53675-2009: National standard of the Russian Federation. Pumps for the trunk oil pipelines. General Requirements

GOST R 53676-2009: Filters for the trunk oil pipelines. General requirements

GOST R 53680-2009: Petroleum and natural gas industries. Well service equipment. General technical requirements

GOST R 53683-2009: Petroleum and natural gas industries. Drilling and production equipment. Hoisting equipment. General technical rudiments

GOST R 53845-2010: Steel rolled products. General rules of sampling, rough specimens and test pieces selection for mechanical and technological testing

GOST R 53932-2010: Tube billet. General specifications

GOST R 54157-2010: Profile steel pipes for metal constructions. Specifications

GOST R 54159-2010: Seamless and welded cold deformed steel pipes for general purposes. Specifications

GOST R 54432-2011: Flanges for valves, fittings, and pipelines for pressure from PN 1 to PN 200. Design, dimensions and general technical requirements

GOST R 54786-2011: Fastening parts for detachable connections of nuclear power plants. Specifications.

GOST R 54803-2011: High-pressure welded steel vessels. General technical requirements

GOST R 54864-2011: Hot-deformed seamless steel pipes for the welded steel structures. Specifications

GOST R 54864-2016: Hot-deformed seamless steel pipes for the welded steel structures. Specifications

GOST R 54929-2012: Steel welded pipes for general purposes. Specifications

GOST R 55020-2012: Pipeline valves. Knife gate valves for trunk pipelines. General specifications

GOST R 55185-2012: Parts and assembly units of coupler and automatic coupler devices of railway rolling stock. Test methods

GOST R 55374-2012: Alloyed structural rolled steel for bridge building. General specifications

GOST R 55429-2013: Hoop-in detachable joints of pipelines. Design, dimensions and general specifications

GOST R 55442-2013: Tubes for boiler and heat exchanging equipment. Specifications. Part 1. Seamless steel pipes to work under pressure not more than 6,4 MPa and at temperatures not exceeding 400 °C

GOST R 55495-2013: Railway multiple units. Durability and dynamics requirements

GOST R 55498-2013: Rolled wheel centres for railway rolling stock. Technical specifications

GOST R 55509-2013: Pipeline valves. Metals used in pipeline valves production. Basic requirements for choice of materials

GOST R 55513-2013: Locomotives. Requirements for strength and dynamic properties

GOST R 55599-2013: High pressure pipeline assembly units and components above 10 up to 100 MPa. General technical requirements

GOST R 55600-2013: Pipes and pipeline components for pressure over 100 to 320 MPa. Norms and methods of strength calculation

GOST R 55682.2-2013: Water-tube boilers and auxiliary installations. Part 2. Materials for pressure parts of boilers and accessories

GOST R 55682.2-2017: Water-tube boilers and auxiliary installations. Part 2. Materials for pressure parts of boilers and accessories

GOST R 55682.6-2013: Water-tube boilers and auxiliary installations. Part 6. Inspection during construction, documentation and marking of pressure parts of the boiler

GOST R 55682.6-2017: Water-tube boilers and auxiliary installations. Part 6. Inspection during construction, documentation and marking of pressure parts of the boiler

GOST R 55738-2013: Studs and ceramic ferrules for stud welding

GOST R 55989-2014: Trunk gas pipelines. Design standard for pressure over 10 MPa. Principal requirements

GOST R 55990-2014: Oil and gas-oil fields. Field pipelines. Design codes

GOST R 56001-2014: Pipeline valves for objects of gas industry. General specifications

GOST R 56354-2015: Cold formed sheet piling of non alloy steels. Specifications

GOST R 56403-2015: Trunk pipelines for oil and oil products transportation. Welded steel pipes. Specifications

GOST R 56467-2015: Space systems. Powder metal and metal composite materials. Classification. Nomenclature of indices

GOST R 56685-2015: Trunk pipelines for oil and oil products transportation. Fittings for diameters from 530 to 1220 mm. General specifications

GOST R 57179-2016: Thermite welding of rails. The method of testing and quality control

GOST R 57180-2016: Welding joints. Methods for determination of mechanical properties, macrostructure and microstructure

GOST R 57423-2017: Tubes for boiler and heat exchanging equipment. Part 2. Seamless steel tubes for pressure purposes more 6, 4 MPa and temperatures exceeding 400 °C. Specifications

GOST R 57430-2017: Pipes, fitting from ductile iron with spherical graphite and their connections for trade oil pipelines. Specifications

GOST R 57837-2017: Hot-rolled steel I-beams with parallel edges of flanges. Specifications

GOST R 57910-2017: Materials for additive process. Control and tests methods

GOST R 58064-2018: Steel welded pipes for building structure. Technical specifications

GOST R 58328-2018: Pipelines of nuclear power plants. The concept of “flow before destruction”

GOST R 58374-2019: Laser hardening of mechanical engineering parts. Process Certification Requirements

GOST R 58419-2019: Additive technology. Products made of titanium alloys made by selective electron beam fusion. General specifications

GOST R 58621-2019: The main pipeline transport of oil and oil products. Hose of a high pressure. General specifications

GOST R 58622-2019: The main pipeline transport of oil and oil products. Methodology for assessing the strength, stability and durability of a vertical steel tank

GOST R 58714-2019: The main pipeline transport of oil and oil products. Pipelines from flexible flat sleeves. General specifications

GOST R 58753-2019: Cargo rope slings for construction. Technical specifications

GOST R 58915-2020: Rolled plates of cryogenic steels. Specifications

GOST R 70431-2022: Materials of equipment and pipelines of nuclear power installations. Methods for determination of impact toughness and critical brittle temperature from impact bending tests

GOST R 70461-2022: Construction works and typical technological processes. Steel structures made of pipes and closed profiles. Rules and control of installation work

GOST R 70463-2022: Four- and six-axle flatcars. General specifications

GOST R 70731.1-2023: Steel pipes for manufacturing of equipment and pipelines for nuclear power plants. General specifications. Part 1. Seamless steel pipes of non-alloy and alloy steels.

GOST R 70731.3-2023: Steel pipes for manufacture of equipment and pipelines of nuclear power plants. General technical conditions. Part 3. Longitudinal welded steel pipes of unalloyed and alloyed steel

GOST R ISO 8083-2008: Machinery for forestry. Falling-object protective structures (FOPS). Technical requirements and test methods

GOST R ISO 898-1-2011: Mechanical properties of fasteners made of carbon steel and alloy steel. Part 1. Bolts, screws and studs of specified property classes with coarse thread and fine pitch thread

I3-94: Instructions for diagnosing the technical condition of tanks of liquefied gas installations

Manual for SNiP II-23-81*: Manual on the design of steel structures of overhead power lines (VL) power transmission towers and outdoor switchgears (outdoor switchgear) of substations with voltages above 1 kV

Manual for SNiP II-23-81*: Strength Design Guide for Steel Structures

Manual for SNiP II-23-81*: Steel Structural Engineering Tutorial

Manual for SNiP III-18-75: A manual on quality control methods for welded joints of metal structures and pipelines performed in construction

MDS 12-22.2005: Recommendations for the application in the construction industry of the requirements of regulatory legal and other regulatory acts containing state regulatory labor protection requirements

MDS 12-56.2010: Wire rope slings for construction. Recommendations for compilation of technical specifications

MDS 13-20.2004: Comprehensive methods for the inspection and energy audit of reconstructed buildings. Design Guide

MU 9001.00.001: Diagnostic technique for Romanian fountain fittings that have worked out their standard service life

NB ZhT TM 02-98: The safety standards for rail transport. Metal products for railway rolling stock. Standards of safety.

ODM 218.2.044-2014: Recommendations for the performance of instrument and instrumental measurements in assessing the technical condition of bridge structures on highways

OSN-APK 2.10.03.001-04: Designing the integrated protection of reinforced concrete structures of industrial agricultural buildings and structures from the effects of corrosive environments

OST 102-45-85: Parts of pipelines seamless welded at PN up to 10.0 MPa (100 kgf / cm2). General specification

OST 102-55-81: Parts of trunk pipelines, steel welded on Ru to 10.0 MPa (100 kgf

OST 108.004.10-86: Quality control program of nuclear energetics products.

OST 108.020.03-82: Stamped billets of turbine and compressor blades made of corrosion-resistant and heat-resistant steel. General Specifications. (2010 edition, including 3 amendments)

OST 108.030.113-87: Carbon and alloy steel forgings for thermal and nuclear power stations equipment and pipelines. Technical specifications.

OST 108.030.124-85: Details and prefabricated units made of pearlitic steels for pipelines with environment pressure P>2.2 MPa (22 kg/cm2) in nuclear power plants. General Specifications.

OST 108.958.04-85: General-purpose forgings for turbines and compressors. Specification.

OST 108.961.02-79: Carbon and alloy steel castings for components of stationary steam turbines with secured strength properties at high temperatures. Specifications.

OST 108.961.04-80: Castings of carbon and alloy steel, nickel-base alloys for components of stationary steam turbines and compressors. Specifications.

OST 108.961.05-80: Billets of rotors and discs for stationary gas turbines and compressors. Technical conditions.

OST 24.125.60-89: Details and prefabricated units of steam and hot water in thermal power plants. General Specifications.

OST 24.149.03-89: Cogwheels for traction rolling stock of mainline railways. Technical conditions.

OST 24.201.03-90: Steel high-pressure vessels and devices. General technical requirements.

OST 26-01-135-81: Vessels, devices and high-pressure pipeline parts forgings. General technical requirements, acceptance rules, Test methods.

OST 26-01-144-81: Studs, nuts, washers, threaded sockets, protective caps for vessels and apparatus for pressure over 9.81 up to 98.1 MPa (over 100 up to 1000 kgf/cm2). General technical requirements. Acceptance rules. Test methods. Marking.

OST 26-01-151-82: Steel welded vessels and devices for low-temperature gas separations. Technical requirements, acceptance regulations and testing methods.

OST 26-07-1419-76: Forgings, stampings and blanks of rolled metal for pipeline fittings.

OST 26-07-2071-87: Pipeline fittings from steel resistant to sulphide corrosion cracking. General specifications.

OST 26-07-262-77: Studs, bolts, screws, nuts for piping fittings. General technical requirements (restriction as per GOST 20700-75, GOST 1759-70, GOST 18126-72).

OST 26-2043-91: Bolts, studs, nuts and washers for flanged joints. Technical requirements

OST 26-291-94: Steel welded vessels and devices. General technical requirements.

OST 3-1686-90: Billets made of structural steel for engineering. General Specifications.

OST 34-10-701-97: Parts of seamless steel welded pipelines on Rrab <2.2 MPa (22 kgf

OST 34-13-910-86: Cargo rope slings for construction. Technical conditions

OST 35-02-72: High-strength bolts, nuts and washers for them.

OST 35-09-86: Hoisting machinery and equipment. General specifications.

OST 36-145-88: Steel technological pipelines for pressure Ру up to 10 MPa. Fluxing automatic arc welding. Typical technological process.

OST 36-79-83: Steel process pipes of carbon and low alloy steels Pi up to 10 MPa (100 kgs/cm2). Semi-automatic welding with consumable electrode in carbon dioxide. Typical process.

OST 3-98-80: Constructional and spring refining steel. Technical requirements.

OST 95-10-72: Billets made of corrosion-resistant steels of 12Х13, 20Х13, 30Х13, 40Х13, 95Х18, 14Х17Н2, 07Х16Н4Б and 07Х16Н4Б-Ш types.

PB 03-164-97: Standards for Fabrication of Steam and Hot-Water Boilers, Pressure Vessels, and Steam and Hot Water Piping by Welding

PB 03-381-00: Regulations of installation of vertical cylindrical steel reservoirs (steel scroll tanks) for petroleum and petroleum products

PB 03-384-00: Rules for design, manufacture and acceptance of steel welded vessels and apparatus

PB 03-576-03: Regulations of design and safe operation of pressure vessels

PB 10-115-96: Regulations of design and safe operation of pressure vessels

PNAE G-7-025-90: Steel castings for nuclear plants. Rules of control

PNST 357-2019: The brake system of the truck wagons. Technical requirements and test methods

PNST 394-2020: Steel pipes for the manufacture of equipment and pipelines of nuclear plants. General specifications. Part 1. Seamless steel pipes from unalloyed and alloyed steels

PNST 454-2020: Steel pipes for the manufacture of equipment and pipelines for nuclear power plants. General technical conditions. Part 3. Longitudinal welded steel pipes of unalloyed and alloyed steel

PNST 594-2022: Oil and gas industry. Underwater production systems. Metallic materials

PNST 595-2022: Oil and gas industry. Underwater production systems. General characteristics and rules of application of structural steels for building structures

PNST 617-2022: Oil and gas industry. Subsea production systems. Certification of producers of special materials

PNST 674-2022: Oil and gas industry. Underwater production systems. Chambers for launching and receiving means of cleaning and diagnostics of pipelines. General specifications

PNST 683-2023: Oil and gas industry. Underwater production systems. Tubes from austenitic-ferritic corrosion-resistant steel. Technical specifications

R 001-98: Guide to the design of steel structures of objects of large-volume blast furnaces

RD 03-380-00: Guidelines for Inspection of Spherical Tanks and Gas Holders for Storage of Liquefied Gases Under Pressure

RD 03-410-01: Instructions on the procedure of comprehensive engineering certification of cryogenic tanks for liquefied gases

RD 03-421-01: Guidelines for the diagnosis of the technical condition and the determination of the residual service life of vessels and apparatus

RD 08-95-95: Provision on the system for technical diagnostics of welded vertical cylindrical oil and petroleum products tanks

RD 09-244-98: Instructions for diagnostics of technical condition of vessels, pipes and compressors, industrial ammonia refrigeration plants.

RD 10-112-2-09: Methodological guidelines for expert examination of hoisting equipment. Part 2: General purpose boom cranes and articulated hoisting cranes.

RD 10-112-3-97: Procedural Guidelines for Inspection of Hoisting Machinery with Expired Service Life. Part 3: Non-Self-Propelled Tower and Boom Cranes, and Derrick Cranes and Timber-Handling Cranes

RD 10-33-93: Slings for loading and general purposes. Requirements for arrangement and safe operation.

RD 10-96-95: Procedural Guidelines for Preparing Data Sheets (in Duplicate) for Steam and Hot Water Boilers

RD 12-411-01: Guidelines for Operating Condition Diagnostics of Underground Steel Gas Lines

RD 153-112-017-97: Instructions for the diagnosis and assessment of residual life of vertical steel tanks

RD 153-34.0-04.185-2003: Machines and equipment for construction, technical re-equipment and repair of energy facilities. Requirements for design, materials, manufacturing, acceptance and testing

RD 153-34.1-17.424-2001: Procedural Guidelines for Investigation of Causes of Damage to Steam Turbine Rotor Components

RD 153-34.1-17.462-00: Procedural Guidelines Assessment of Serviceability of Steam Turbine Blades in the Process of Manufacturing, Operation, and Repair

RD 153-34.1-21.530-99: Procedural Guidelines for Inspection of Structural Elements of Process Buildings and Structures of Thermal Power Stations. Part 2: Metal Structures

RD 153-34.1-30.106-00: Rules for technical operation of gas-handling facilities for gas-turbine and combined-cycle units at thermal power plants

RD 153-39.4-078-01: Operation Requirements for Tanks on Trunk Petroleum Product Pipelines and at Petroleum Depots

RD 22-16-2005*: Guiding regulatory material. Hoisting machines. Selection of materials for the manufacture, repair and reconstruction of welded steel structures

RD 22-207-88: Lifting machines. General requirements and production standards

RD 24.031.15-88: Methodological instructions. Designing stationary boilers steelworks.

RD 24.090.52-90: Lifting-transport machines. Materials for welded metal structures.

RD 24.207.01-90: Piping fittings. Water-flap average life time dependence on specific pressure on the sealing surface

RD 24-SZK-01-01: Freight slings for general use on a textile basis. Requirements for the device and safe operation

RD 26.260.12-99: Service life extension of liquid carbon dioxide vessels. Instructional guidelines.

RD 26.260.16-2002: Expert technical diagnostics of vessels and equipment operating under pressure at gas and gas condensate and oil production and processing facilities in the northern regions of the Russian Federation and underground gas storage facilities

RD 26-11-08-86: Welded Joints. Mechanical Tests

RD 26-17-086-88: Weld joints. Quality control of heat treatment equipment

RD 2-97: Regulations on the system for the technical diagnosis of autoclaves in the production of building materials

RD 31.3.3-97: Guidelines on technical control of waterworks in maritime transport. Ministry of Transport, DMT Soyuzmorniiproekt, 1997

RD 31.35.11-89: Instructions for engineering surveys of seaport hydraulic structures

RD 31.55.01.01-90: Spare parts for marine diesel engines of foreign construction. Steel piston heads. Technical requirements

RD 34.17.435-95: Methodological instructions. Technical diagnostics of boilers with working pressure up to 4.0 MPa inclusive.

RD 34.17.436-92: Procedural Guidelines. Individual Inspection of Metal of Cast Housing Components for Steam Turbines

RD 34.17.440-96: Procedural Guidelines for Assessment of Individual Service Life of Steam Turbines and Prolongation of Their Operational Life Beyond the Individual Service Life of Steam Turbines and Prolonging Their Operational Life Beyond The Equipment Service Life

RD 34.21.623-96: Procedural Guidelines for Inspection of Metal Structures of Fuel Supply Trestles

RD 34.40.601-97: Procedural Guidelines for Inspection of Hot Water Storage Tanks

RD 36-62-00: Hoisting equipment. General technical requirements.

RD EO 0007-93: Standard instruction manual for operation of industrial buildings and structures of nuclear power plants. Part 1. Organization of operation, repairs and maintenance. Volume 1, 2

RD EO 1.1.2.99.0867-2012: Methods for assessing the technical condition and residual life of building structures of nuclear power plants

RD RosJeK 05-014-98: Guidelines for expert examination of pipelines of steam and hot water of category IV, supervised by the Gosgortekhnadzor of Russia

RD RTM 38.14.006-86: Method for determining the service life of the coils of catalytic reforming furnaces that have worked out the project resource

Recommendations: Aspiration smoke-sensitive alarms VESDA. Part 1. Scope

RMD 40-20-2013 Sankt-Peterburg: Designing and installation pipelines for water supply and sewage systems in Saint-Petersburg

RMD 40-20-2016 Sankt-Peterburg: Installation of water supply and drainage networks in St. Petersburg

RTM 26-07-144-73: Parts of pipeline fittings from alloys BT I-0, 0T4 and TLZ (TL-B1). Oxidation

Safety Guide: Recommendations on arrangement and safe operation of process pipelines

Safety Guide: Recommendations on technical diagnostics of welded vertical cylindrical tanks for oil and petroleum products

SDA 24-2008: Rules for assessment (certification) of testing laboratories personnel

SNiP 3.06.07-86: Bridges and Pipes. Rules for Inspection and Testing

SNiP II-45-75: Main pipelines

SO 153-34.17.470-2003: Instructions on the procedure for inspection and extension of the service life of steam pipelines beyond the park resource

SO 34.03.355-2005: Methodological instructions for ensuring fire and explosion safety during operating power gas turbine electric power units.

SP 101-34-96: Set of rules for construction of trunk pipelines (SPSMG). Code of practice for selection of pipes for the construction of trunk gas pipelines. RAO "Gazprom", 11/15/90

SP 16.13330.2011: Steel structures

SP 260.1325800.2016: Cold-formed thin-walled steel profile and galvanized corrugated plate constructions. Design rules

SP 260.1325800.2023: Thin-walled steel structures made of cold-formed galvanized profiles and corrugated sheets. Design rules

SP 294.1325800.2017: The construction of steel. Design rules

SP 34-101-98: Selection of pipes for main oil pipelines during construction and repair

SP 34-116-97: Instructions For Design, Construction and Redesign of Field Oil and Gas Pipelines

SP 36.13330.2012: Trunk pipelines

SP 53-102-2004: General rules for steel structure design

SP 79.13330.2012: Bridges and culverts. Rules of examination and test

ST RK 1667-2007: Materials of construction for the body of passenger cars and multiple units. Technical requirements and testing methods

ST RK 2432-2013: Railway rails differentially strengthened and not-heat-strengthened. General specification

ST SSFZhT TsT 052-99: Shoes and brake pads for locomotives running on main railways. Standard testing method.

ST SSFZhT TsT-121-2001: Cylindrical cogged wheels of traction gearing of traction rolling stock of main railway lines. Standard testing method

ST TsKBA 005.1-2003: Pipe fittings. Metals used in the valve industry. Part 1. Basic requirements for the choice of materials

ST TsKBA 007-2004: Pipe fittings. Organizing and conducting an industrial safety review of pipeline valves operated at hazardous production facilities

ST TsKBA 007-2015: Pipe fittings. Organizing and conducting an industrial safety review of pipeline valves operated at hazardous production facilities

ST TsKBA 010-2004: Pipe fittings. Forgings, stampings and rolled products. Technical requirements

ST TsKBA 012-2005: Pipe fittings. Studs, bolts, nuts and washers for pipe fittings. Technical requirements

ST TsKBA 014-2004: Pipe fittings. Steel castings. General technical conditions

ST TsKBA 015-2005: Pipe fittings. The program of quality control of fittings of nuclear power plants

ST TsKBA 024-2006: Pipe fittings. Determination of residual life and reliability indicators

ST TsKBA 050-2008: Pipe fittings. Castings from cast iron. Technical requirements

ST TsKBA 051-2008: Pipe fittings. Castings from non-ferrous alloys. Technical requirements

ST TsKBA 052-2008: Pipe fittings. Requirements for materials of fittings used for hydrogen sulfide environments

ST TsKBA 088-2010: Pipe fittings. The quality control program of valves used for hydrogen sulfide environments

ST TsKBA 106-2011: Pipe fittings. Oxidation of titanium alloy parts

STO: Thermal power plants. Methods of assessing the condition of the main equipment

STO-SA-03-002-2009: Rules for the design, manufacture and installation of vertical cylindrical steel tanks for oil and oil products

TSN 13-311-01: Inspection and assessment of the technical condition of buildings and structures

TU 102-488.1-05: Connecting details and nodes of main pipelines on Рр up to 10 MPa (100 kgf

TU 102-488-95: Connecting parts and nodes of trunk pipelines on RR up to 10 MPa (100 kgf / cm2)

TU 108.11.853-87: Procurement of parts from purchased long products

TU 13.03-011-00212179-2003: Spiral-welded electric-welded pipes made of carbon steel 20 for pipelines of nuclear power plants. Technical conditions

TU 1303-002-08620133-01-TU-LU: Electrowelded pipes made of carbon and low alloy steels for steam and hot water pipelines

TU 1317-006.1-593377520-2003: Steel seamless oil and gas pipelines of increased operational reliability for the field construction of TNK OJSC

TU 1317-233-0147016-02: Seamless hot-deformed oil and gas pipes of increased reliability during operation for the fields of OAO Tomskneft VNK

TU 1381-003-47966425-2006: Steel electric-welded steel pipes with an outer diameter of 610 - 1420 mm for gas pipelines for operating pressures up to 9.8 MPa

TU 14-158-101-97: Seamless hot-deformed oil and gas pipes of increased cold resistance and corrosion resistance for OJSC "Surgutneftegas" fields

TU 14-158-116-99: Steel electric-welded longitudinal pipes of increased corrosion resistance and cold resistance for gas and oil pipelines

TU 14-159-1128-2008: Steel and seamless hot-deformed cold-resistant pipes for gas pipelines of gas-lift systems and arrangement of gas fields

TU 14-161-184-2000: Steel seamless tubes of steel grade 09G2S

TU 14-162-14-96: Seamless hot-deformed oil and gas pipes of increased corrosion resistance and cold resistance. Technical conditions

TU 14-2-767-88: Hot-rolled steel strip with improved quality. Technical conditions

TU 14-3-1128-2000: Seamless hot-deformed steel pipes for gas pipelines of gas-lift systems and gas field equipment. Technical conditions

TU 14-3-1573-96: Steel electric welded longitudinal pipes with a diameter of 530-1020 mm with a wall thickness of up to 32 mm for main gas pipelines, oil pipelines and oil product pipelines

TU 14-3-1698-2000: Steel electric-welded longitudinal pipes with a diameter of 1020, 1220 mm for gas and oil pipelines

TU 14-3-1760-91: Seamless Steel Pipes, Hot Deformed, Higher Precision

TU 14-3-190-2004: Seamless steel pipes for boiler plants and pipelines

TU 14-3-1972-97: Seamless hot-deformed oil and gas pipes of increased corrosion resistance and cold resistance. Technical conditions

TU 14-3-377-99: Steel welded longitudinal welded pipes for main gas and oil pipelines

TU 14-3-460:2009: Seamless steel pipes for steam boilers and pipelines. Technical conditions

TU 14-3-587-77: Seamless hot-rolled pipes of steel grade 20 for the refining industry

TU 14-3-67-72: Electrowelded pipes made of low-alloyed 16G2AF steel with a diameter of 219 and 273. Experimental batch. Technical conditions

TU 14-3-808-78: Spiral-welded electrowelded carbon steel pipes 20 for pipelines of nuclear power plants

TU 14-3R-1128-2007: Seamless cold-resistant steel pipes for gas pipelines of gas-lift systems for oil production and gas field equipment. Technical conditions

TU 14-3R-1471-2002: Northern-straight-seam electric-welded pipes for arranging oil and gas fields, main gas pipelines, oil and oil product pipelines of field pipelines. Technical specifications

TU 14-3R-251-2007: Seamless steel pipes for chemical and petrochemical plants with conditional pressure Py = 19.6 - 98 MPa (200 - 1000 kgf/cm2)

TU 14-3R-44-2001: Seamless hot-deformed steel pipes for oil and gas pipelines. Technical conditions

TU 14-3R-53-2001: Seamless mechanically machined steel pipes for steam pipelines

TU 14-3R-54-2001: Seamless hot deformed pipes made of steel grade 20YUCH. Technical conditions

TU 14-3R-55-2001: Seamless steel pipes for steam boilers and pipelines

TU 14-3R-56-2001: Welded steel pipes with a diameter of 1420, 1620, 1720, 2020 and 2220 mm for general use. Technical conditions

TU 14-3R-62-2002: Seamless hot-deformed steel pipes made of 15X5M steel for the petroleum refining industry. Technical conditions

TU 14-4-87-72: High-strength thermally treated bolts and nuts with a diameter of M16 - M27 for building steel structures. Technical conditions

TU 1462-203-0147016-01: Welding steel connection parts for operation in oil-field environments with increased corrosion activity. Technical conditions

TU 1468-001-17192736-01: Seamless welded bends made of alloy and high alloy steel

TU 1468-010-593377520-2003: Seamless steel welded joints for pipelines, of increased operational reliability, intended for the field construction of OAO TNK

TU 1469-006-00153229-2001: Parts connecting on Рр up to 16 MPa (160 kgf

TU 1-92-156-90: Forgings and forgings of carbon and alloy structural steel. Technical conditions

TU 5851-008-01388383-2002: Reinforced concrete beams with frame fittings for the superstructure of road bridges and overpasses with a length of 12, 15 and 18 m. Specifications

VRD 39-1.11-014-2000: Procedural Guidelines for Inspection and Identification of Steel Pipes for Gas and Petroleum Pipelines

VSN 136-78/Mintransstroj: Instructions for the design of auxiliary structures and devices for the construction of bridges

VSN 169-80: Guidelines for Using Manual and Automated Welding in Shop-Fabrication of Structural Steel Components for Bridges

VSN 1-84: T-Joints and T-Type Connections, Welded, for Nominal Pressure of 5.5 and 7.5 MPa (55 and 75 kgf/sq. cm)

VSN 36-84: Guidelines for Determining Load Capacity of Reinforced Concrete Beam Span Structures of Road Bridges in Use

VSN 41.88: Design of ice-resistant stationary platforms

Customers Who Viewed This Item Also Viewed:

imgalt imgalt
Petroleum products. Method for measurement of viscosity by automatic capillar viscosimeter
Language: English
Price: $87.00
imgalt
Greases. Method for determination of ultimate strength and thermostrengthening
Language: English
Price: $71.00
imgalt
Pipe fittings. Ball valves made of brass. General specifications
Language: English
Price: $398.00
imgalt

YOUR ORDERING MADE EASY!

RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.

Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.

We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.

Placing Your Order

Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).

Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.

For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.

For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.

Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.

Your Order Best Quality and Authenticity Guarantee

Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).

We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.

We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.

All Codes and Regulations

All Categories

Send us a message Expand Collapse

Leave your message in the form below, and we will write back by e-mail!