GOST 19903-74
ГОСТ 19903-74
|
|
Hot-rolled steel sheets. Dimensions
Прокат листовой горячекатаный Сортамент
Status: Not effective - Superseded. Information about the registration of 246-st from 04/06/2016 (the official website of Rosstandart); IUS 11-2016
The standard applies to hot-rolled sheet steel with a width of 500 mm and more, manufactured in sheets with a thickness of 0.40 to 160 mm and rolls with a thickness of 1.2 to 12 mm
Стандарт распространяется на листовую горячекатаную сталь шириной 500 мм и более, изготовляемый в листах толщиной от 0,40 до 160 мм и рулонах толщиной от 1,2 до 12 мм.
Choose Language:
Format: Electronic (pdf/doc)
Approved: State Committee of Standards of the Council of Ministers of the USSR,
6/27/1974
SKU: RUSS16548
The Product is Contained in the Following Classifiers:
Construction (Max) »
Standards »
Other state standards used in construction »
77 Metallurgy »
ISO classifier »
77 METALLURGY »
77.140 Iron and steel products »
77.140.50 Steel sheet products and semi-finished products »
National standards »
77 METALLURGY »
77.140 Iron and steel products »
77.140.50 Steel sheet products and semi-finished products »
National Standards for KGS (State Standards Classification) »
Latest edition »
V Metals and metal products »
V2 Carbon steel of ordinary quality (ordinary stock) »
V23 Sheets and Stripes »
The Document is Replaced With:
GOST 19903-2015: Hot-rolled sheet. Range
As a Replacement Of:
GOST 5681-57: Rolled plate steel. Assortment
The Document References:
GOST 26877-91: Metal products
The Document is Referenced By:
ATK 24.201.18-91: Flanges, Covers, and Gaskets for Compact Chemical Apparatus. Design and Dimensions. Technical Specifications
DS 54-003-038-89: Guidelines for the safety of civil aviation workers exposed to radio frequency electromagnetic radiation (REMBR-89) during labor
GOST 10160-75: Magnetically soft precision alloys
GOST 10403-80: Constructional steel trowels. Technical requirements
GOST 10704-63: Electrically welded steel tubes. Assortment
GOST 10704-76: Electric welded longitudinal steel pipes. Assortment
GOST 10704-91: Electrically welded steel line-weld lubes. Range
GOST 10778-83: Spatulos. Specifications
GOST 10885-85: Hot-rolled two-ply corrosion-resistant steel sheets
GOST 11142-78: Plate boxes for personal defense means. Specifications
GOST 11268-76: Structural thin sheets of special purpose alloyed high quality steel
GOST 11269-76: Universal rolled plates and wide strips made of special purpose structural high-grade Alloy steel
GOST 11354-82: Wooden returnable boxes for production of bood industry. Specifications
GOST 11354-93: Returnable cases of wood and wood materials for food-stuffs and agricultural products. Specifications
GOST 11474-76: Bent-steel sections. Specifications
GOST 12082-82: Roof boarding for consignments up to 500 kg. General specifications
GOST 12840-80: Safety locks for single hooks. Type and dimensions
GOST 13154-67: Floating clamps for machine retaining devices. Design and dimensions
GOST 13568-75: Power transmission
GOST 13950-91: Welded and folded steel barrels
GOST 14082-78: Bars and plates precision alloys with assigned temperature coefficient of linear expansion. Specifications
GOST 14225-83: Wooden cases
GOST 14229-78: Spring pins. Specification
GOST 14635-79: Steel cold-shaped special profiles for wagon building. Grading
GOST 14637-79: Rolled thick-plate and wide-band universal of carbon steel for general use. Specification
GOST 14637-89: Thick sheet rolled stock of normal quality carbon steel
GOST 15102-75: Universal metallic closed container of nominal gross mass 5,0 tn. Specifications
GOST 1530-78: Tape hot-rolled (rolled) from carbon quality construction steel. Specification
GOST 1577-81: Rolled sheets and wide strips of structural quality steel. Specifications
GOST 1577-93: Plate and broadband roll stock of construction fine steel.
GOST 15860-84: Steel welded cylinders for liquefied hydrocarbon gases at pressure up to 1.6 MPa.
GOST 16078-70: Tube connections on internal cone. Technical requirements
GOST 16193-70: Blanks of dies backing of horizontal forging machines. Construction and dimensions
GOST 16339-70: Support holders for a 250 and 500 kg force rolling heads. Construction and dimensions
GOST 16340-70: Support holders for 1000 and 2000 kg force rolling heads. Construction and dimensions
GOST 16341-70: Support holder for a 4000 kg force rolling head. Construction and dimensions
GOST 16523-89: Rolled sheets from carbon quality and ordinary steel for general purposes
GOST 16523-97: Rolled sheets from quality and ordinary carbon steel for general purposes. Specifications
GOST 16561-76: Metal accessories for wood containers. Specifications
GOST 16818-85: Sand mould intended to produce the sample blanks for testing the mechanical properties of flaky graphite grey cast iron
GOST 17032-2010: Horizontal steel tanks for petroleum products. Specifications
GOST 17066-80: Low-alloyed structural steel sheets and strips in coils. Marks and technical requirements
GOST 17066-94: Thin sheet rolled stock of high strength steel
GOST 17366-80: Welded thick-walled steel barrels for chemical products
GOST 18335-83: Enamel НЦ-184. Specifications
GOST 18579-79: Lifting devices of middle size freight containers with rating to 6 ton for general and specific cargoes. Specifications
GOST 19281-2014: High strength rolled steel. General specification
GOST 19281-89: Rolled steel with increased strength. General specifications
GOST 19282-73: Low-alloyed plate strip universal steel. Specifications
GOST 19330-99: Centrifugal reinforced concrete posts for railway overhead line equipment. Specifications
GOST 19596-87: Spades
GOST 19772-74: Roll-formed steel unequal leg angles. Dimensions
GOST 19804.5-83: Reinforced concrete round hole piles and pile-shells. Structure and dimensions
GOST 19804.6-83: Reinforced-concrete round hole built-up piles and tubular piles. Structure and dimensions
GOST 19903-2015: Hot-rolled sheet. Range
GOST 20295-74: Steel welded pipes for main gas and oil pipelines
GOST 20295-85: Welded steel pipes for gas and oil pipelines. Technical specifications
GOST 20435-75: Universal metallic closed container of nominal gross mass 3,0 tn. Specifications
GOST 21.502-2007: System of design documents for construction. Execution rules of design and working documents for metal structures
GOST 21.502-2016: System of building design documents. Rules for the implementation of working documentation for metal structures
GOST 21.602-2003: System of design documents for construction. Rules for execution of working documentation of heating, ventilation and air conditioning
GOST 21029-75: Aluminum barrels for chemical products
GOST 21133-75: Specialized box pallets for potatoes, vegetables, fruits, melons and gourds. Specification
GOST 21448-75: Alloyed powders for welding deposit. Specifications
GOST 21562-76: Metal-faced building panels with foam plastic thermal insulation. General specifications
GOST 21668-85: Surveying metallic signals. Types, basic parameters and sizes. Technical requirements
GOST 21708-76: Brown coals, hard coals and anthracite. Method for determination of abrasive coefficient of ash
GOST 22778-77: Accessories for vertical cylindrical storage tank for petroleum products. Roll blocks. Basic parameters and dimensions. Technical requirements
GOST 22779-77: Accessories for vertical cylindrical storage tank for petroleum products. Siphon taps. Basic parameters and dimensions. Technical requirements
GOST 23119-78: Steel welded roof trusses of double angles for industrial buildings. Specifications
GOST 23121-78: Steel crane-runway beams for general-purpose overhead travelling electric cranes of 50 t load-carrying capacity
GOST 23309-78: Boxes radiation-protective. General technical requirements
GOST 23570-79: Rolled carbon steel welded for building metal structures. Specification
GOST 2361-74: Limiters for cases flap covers. Specifications
GOST 2364-74: Angles for wood cases. Specifications
GOST 23682-79: Steel stepped columns for buildings with general-purpose overhead electric cranes of 50 ton capacity. Specifications
GOST 24140-80: Pipe-line fastening parts. Cramps and clamps. Specifications
GOST 24587-81: Reinforced concrete flumes-water outlets of irrigation systems. Specifications
GOST 24617-81: Protection agents for wood. Test method of inflammable properties on models
GOST 24982-81: Sheets of corrosion-resistant, heat-resistant and high-temperature alloys
GOST 25577-83: Steel bent closed welded square and rectangular sections. Specifications
GOST 25743-83: Radiochemical hoods. Types, main characteristics and dimensions
GOST 25878-85: Steel moulds for reinforced concrete members. Pallets. Construction and dimensions
GOST 26256-84: Loading chutes for trash ducts of the floors of residential and public buildings. Specification
GOST 26257-84: Permanent containers for trash ducts of the floors of residential and public buildings. Specification
GOST 26526-85: Vacuum equipment. Flanger joint for high vacuum system. Design, dimensions and technical requirements
GOST 26804-2012: Metal road safety barriers. Specifications
GOST 26804-86: Metal road safety barriers. Specifications
GOST 27579-88: Rectangular formed-welded section roof trusses. Specifications
GOST 27772-2015: Structural steel structure rolled products. General specifications
GOST 27772-88: structural steel structure rolled products. General specifications
GOST 28186-89: Brake shoes for motor car of rolling stock. Specifications
GOST 2991-76: Wooden uncollapsible cases for weights up to 500 kg. General specifications
GOST 2991-85: Wooden uncollapsible cases for weights up to 500 kg. General specifications
GOST 3.1118-82: Unified system for technological documentation. Forms and rules for filling in the technological process cards
GOST 3.1123-84: Unified system for technological documentation. Forms and rules for drawing up documents used in setting of proper rates of material consumption
GOST 3.1402-84: Unified system for technological documentation. Forms and rules of making documents on technological processes of material laying-out
GOST 3.1404-86: Unified system of technological documentation. Forms and rules of making documents on technological processes and cutting operations
GOST 30245-2003: Steel bent closed welded square and rectangular section for building constructions. Specifications
GOST 30245-2012: Steel bent closed welded square and rectangular section for building. Specifications
GOST 30245-94: Roll-formed steel welded closed square or rectangular sections designed for use in steel structures
GOST 30249-97: Cast iron brake blocks for locomotives. Specifications
GOST 30373-95: Electromagnet compatibility of technical means. Test equipment. Shielded chambers. Classes, basic parameters, technical requirements and test methods
GOST 30482-97: Electroslag welding of steels. Requirements for technological process
GOST 30765-2001: Metal transport packagings. General specifications
GOST 30766-2001: Tins for chemical products. General specifications
GOST 3111-81: Spherical plugs. Construction and dimensions
GOST 31385-2008: Vertical cylindrical steel tanks for oil and oil-products. General specifications
GOST 31447-2012: Steel weldes pipes for trunk gas pipelines, oil pipelines and oil products pipelines. Specifications
GOST 32020-2012: Elastomeric bearings for bridge building. Specifications
GOST 32955-2014: Public roads. Trays for road drainage. Technical specifications
GOST 33008-2014: Fireplaces, fireplace inserts, for solid fuels. Requirements and methods of testing
GOST 33119-2014: Polymer composites constructions for foot-bridges. Specifications
GOST 33228-2015: Steel welded pipes for general purposes. Specifications
GOST 3836-83: Unalloyed thin sheet and band steel for electric engineering purposes
GOST 3849-78: Accessories for vertical cylindrical strorace tank for pertoleum products. Cast iron joints for swing tube
GOST 4041-71: Rolled plates of high quality structural steel for cold stamping
GOST 4295-80: Boxes made of boards for sheet glass
GOST 4609-49: Filling-draining equipment for flammable and highly inflammable liquids. Single filling-draining standpipe with manual pump
GOST 4610-49: Filling-draining equipment for flammable and highly inflammable liquids. Powered single filling-draining standpipe
GOST 4621-79: Accessories for horizontal cylindrical storage tanks for petroleum products. Receiving and distributing sleeve. Technical requirements
GOST 5037-78: Metallic churns
GOST 5037-97: Metal cans for milk and dairy products
GOST 5464-75: Pontoons of pressure floating mud pipelines and pipelines. General specifications
GOST 5520-79: Carbon, low-alloy and alloy sheet steel for boilers and pressure vessels. Specifications
GOST 5521-93: Shipbuilding rolled steel
GOST 5582-75: Corrosion-resistant, heat-proof, and heat-resistant thin-sheet rolled stock
GOST 5799-78: Flasks for paints and varnishes. Specifications
GOST 5959-80: Uncollapsable wooden sheet material boxes for weights to 200 kg mass. General specifications
GOST 6127-52: Bath valves. Technical requirements
GOST 6533-78: Ellipsoidaldished heads flanged made of steel for vess els apparatus and boilers. Basis dimensions
GOST 6713-91: Low-alloyed structural rolled stock for bridge building. Specifications
GOST 6765-75: Hot rolled three-layer steel and wide steel strip (universal). Specifications
GOST 7350-77: Plate, corrosion-resistant, heat-resistant, and high-temperature steel
GOST 7623-84: Outdoor drainage pipes. Specification
GOST 8278-75: Roll-formed steel equal channels. Dimensions
GOST 8281-80: Roll-formed steel unequal channels Dimensions
GOST 8282-76: Bent-steel С-shaped equal flange sections. Dimensions
GOST 8283-77: Cold-formed equal omega-shaped steel. Range
GOST 8442-65: Track and signal signs of rail roads
GOST 8568-77: Corrugated steet rhombic and lentil form steel. Technical requirements
GOST 8696-74: General-purpose electrically welded spiral seam steel pipes. Specifications
GOST 9062-89: Chaplets for iron and steel castings.
GOST 9234-74: Steel bent sheet sections with trapezoid-shaped corrugation. Dimensions
GOST 9338-80: Plywood drums. Specifications
GOST 9396-88: Boxes wooden reusable
GOST 9533-81: Trowels, tuck pointing tools. Specifications
GOST R 52079-2003: Steel welded pipes for trunk gas pipelines, oil pipelines and oil products pipelines. Specifications
GOST R 52246-2004: Hot-dip zinc-coated steel sheet. Specifications
GOST R 52246-2016: Hot-dip zinc-coated steel sheet. Specifications
GOST R 52630-2006: Steel welded vessels and apparatus. General specifications
GOST R 52630-2012: Steel welded vessels and apparatus. General specifications.
GOST R 52910-2008: Vertical cylindrical steel tanks for oil and oil-products. General specifications
GOST R 52927-2008: Rolled stock of normal, increased- and high-strength steel for shipbuilding. Specifications
GOST R 52927-2015: Rolled of normal, increased - and high-strength steel for shipbuilding. Specifications
GOST R 53192-2008: Welded steel structures of freight cars. Technical requirements
GOST R 53681-2009: Flare parts for general refinery and petrochemical service. General technical requirements
GOST R 54803-2011: High-pressure welded steel vessels. General technical requirements
GOST R 54826-2011: Gas-fired central heating boilers. Type C boilers of nominal heat input not exceeding 70 kW
GOST R 54908-2012: Heat-resistant steel metal products. Specifications
GOST R 54929-2012: Steel welded pipes for general purposes. Specifications
GOST R 55085-2012: Cylinders steel welded on pressure 1,6 MPа for liquefied hydrocarbon gas, used as motor fuel on car transport facility. Specifications
GOST R 55374-2012: Alloyed structural rolled steel for bridge building. General specifications
GOST R 56355-2015: Cold formed sheet piling of non alloy steels. Tolerances on shape and dimensions
GOST R 56367-2015: Safes and steel cabinets for storage of civilian weapons and ammunition. General specifications
GOST R 56403-2015: Trunk pipelines for oil and oil products transportation. Welded steel pipes. Specifications
GOST R 56685-2015: Trunk pipelines for oil and oil products transportation. Fittings for diameters from 530 to 1220 mm. General specifications
IM 4-12-95: Automation systems. Handbook of materials. Part 1. Basic materials
ITN 93: Instructions for technical supervision, methods of audit and rejection of tube furnaces, tanks, vessels and apparatuses of oil refining and petrochemical industries
L8-198.000: Weld bend supports. Working drawings
L8-508-524: Supports and suspensions of pipelines Dn less than 89 mm. Working drawings
Manual for SNiP 3.05.01-85: Manual for the production and acceptance of work when installing ventilation and air conditioning systems
Manual for SNiP II-23-81*: Manual on the design of steel structures of overhead power lines (VL) power transmission towers and outdoor switchgears (outdoor switchgear) of substations with voltages above 1 kV
Manual for SNiP II-23-81*: Strength Design Guide for Steel Structures
Manual for SNiP II-23-81*: Steel Structural Engineering Tutorial
MDS 12-61.2012: The project for the production of works on the device of a rail track of a tower crane with a concrete beam BRP-62.8.3
MDS 31-8.2002: Recommended Practice for the Design and Installation of Skylights for Natural Illumination of Rooms
MI 1744-87: State system for ensuring uniformity of measurements. Thermoelectric temperature transducers of platinum-platinum-platinum exemplary type PPO. Method of verification
MRDS 02-08: Manual on scientific and technical support and monitoring of buildings and structures under construction, including long-span, high-altitude and unique
MUK 4.1.986-00: Measurement method for measuring the mass fraction of lead and cadmium in food products and food raw materials using electrothermal atomic absorption spectrometry
MUK 4.1.991-00: Measurement method for measuring the mass fraction of copper and zinc in food products and food raw materials by electrothermal atomic absorption spectrometry
ODM 218.2.002-2008: Recommendations for the design and installation of polymer bridge bearing parts
ODM 218.2.058-2019: Recommendations on the use of composite materials in the construction of bridge structures and pedestrian bridges
ODM 218.2.070-2016: Guidelines for the design, installation and maintenance of seismic protective devices of bridges on highways
ODM 218.3.066-2016: Guidelines for the design, installation and maintenance of spherical sliding parts of bridge structures on highways
ODM 218.6.004-2011: Guidelines for road safety ensuring rope guardrails
OST 102-45-85: Parts of pipelines seamless welded at PN up to 10.0 MPa (100 kgf / cm2). General specification
OST 102-55-81: Parts of trunk pipelines, steel welded on Ru to 10.0 MPa (100 kgf
OST 102-56-81: Parts of trunk pipelines, steel welded on Ru to 10.0 MPa (100 kgf
OST 102-57-81: Parts of trunk pipelines, steel welded on Ru to 10.0 MPa (100 kgf
OST 102-58-81: Parts of trunk pipelines, steel welded on Ru to 10.0 MPa (100 kgf
OST 102-59-81: Parts of pipelines steel welded at PN up to 10,0 MPa (100 kgf / cm2). 3-way joints, stamped and welded. Dimensions
OST 102-60-81: Parts of pipelines steel welded at PN up to 10,0 MPa (100 kgf / cm2). 3-way joints, welded. Dimensions
OST 102-61-81: Parts of pipelines steel welded at PN up to 10,0 MPa (100 kgf / cm2). 3-way joints with reinforcing overcoating. Dimensions
OST 102-62-81: Parts of pipelines steel welded at PN up to 10,0 MPa (100 kgf / cm2). Ellipse bottom covers, with flanges. Dimensions
OST 108.021.04-78: Steam Stationary Turbines. Welded diaphragms. Guide vanes. General specifications.
OST 108.109.01-92: Basic part billets made of corrosion-resistant steels of austenitic class. Technical conditions.
OST 13-158-83: Wooden returnable and reusable furniture container. Technical specifications.
OST 14-11-196-86: Thin-sheet roof rolled plate. Specifications.
OST 153-34.0-1001-99A: Assembly units and suspension parts for nuclear power plant station pipelines Py <= 4.0 MPa (40 kgf/cm2). Suspension mounting block. Design and dimensions
OST 153-34.0-1001-99А: Assembling units and station pipeline hang details of nuclear power plants. Nominal pressure is no more than 4,0 MPa. Block of hang fastening. Design and dimensions.
OST 153-34.0-1002-99A: Assembly units and suspension parts for nuclear power plant station pipelines Py <= 4.0 MPa (40 kgf/cm2). Gasket Design and dimensions
OST 153-34.0-1002-99А: Assembling units and station pipeline hang details of nuclear power plants. Nominal pressure is no more than 4,0 MPa. The laying. Design and dimensions.
OST 153-34.0-1005-99A: Assembly units and suspension parts of nuclear power plant station pipelines Py <= 4.0 MPa (40 kgf/cm2). Suspension block spring doubled. Design and dimensions
OST 153-34.0-1005-99А: Assembling units and station pipeline hang details of nuclear power plants. Nominal pressure is no more than 4,0 MPa. Spring dual block of hang. Design and dimensions.
OST 153-34.0-1006-99A: Assembly units and suspension parts of nuclear power plant station pipelines Py <= 4.0 MPa (40 kgf/cm2). Suspension block spring support. Design and dimensions
OST 153-34.0-970-99A: Assembly units and support parts for station pipelines of nuclear power plants Py <= 2.5 MPa (25 kgf/cm2). Sleeve for passage through the ceiling. Design and dimensions
OST 153-34.0-970-99А: Assembling units and support station pipeline details of nuclear power plants. Nominal pressure is no more than 2,5 MPa. The plug for passage through the ceiling. Design and dimensions.
OST 153-34.0-971-99A: Assembly units and support parts of the station piping of nuclear power plants Py <= 4.0 MPa (40 kgf/cm2). Sleeve for passage through the roof. Design and dimensions
OST 153-34.0-972-99A: Assembly units and support parts for station pipelines of nuclear power plants Py <= 1.6 MPa (16 kgf/cm2). Support welded sliding, directing and motionless. Design and dimensions
OST 153-34.0-972-99А: Assembling units and support station pipeline details of nuclear power plants. Nominal pressure is no more than 1,6 MPa. The support is welded and sliding, guide rail and fixed. Design and dimensions.
OST 153-34.0-976-99A: Assembly units and parts of the supports of the station pipelines of nuclear power plants Py <= 2.5 MPa (25 kgf/cm2). Shells welded sliding supports, guides and fixed. Design and dimensions
OST 153-34.0-976-99А: Assembling units and support station pipeline details of nuclear power plants. Nominal pressure no more than 2,5 MPa. The holder of the welded and sliding, guide rail and fixed supports. Design and dimensions.
OST 153-34.0-977-99A: Assembly units and support parts for station piping of nuclear power plants Py <= 4.0 MPa (40 kgf/cm2). Plates guides. Design and dimensions
OST 153-34.0-977-99А: Assembling units and support station pipeline details of nuclear power plants. Nominal pressure is no more than 4,0 MPa. The guide rail plates. Design and dimensions.
OST 153-34.0-978-99A: Assembly units and parts of the supports of the station pipelines of nuclear power plants Py <= 4.0 MPa (40 kgf/cm2). Housings for clamp clamping, guides and fixed. Design and dimensions
OST 153-34.0-978-99А: Assembling units and support station pipeline details of nuclear power plants. Nominal pressure is no more than 4,0 MPa. The holders of the saddles, sliding, guide rails and fixed supports. Design and dimensions.
OST 153-34.0-979-99A: Assembly units and support parts for station pipelines of nuclear power plants Py <= 4.0 MPa (40 kgf/cm2). Half holders and gaskets. Design and dimensions
OST 153-34.0-979-99А: Assembling units and support station pipeline details of nuclear power plants. Nominal pressure is no more than 4,0 MPa. Semi-saddles and laying. Design and dimensions.
OST 153-34.0-980-99A: Assembly units and support parts for station pipelines of nuclear power plants Py <= 4.0 MPa (40 kgf/cm2). Pillows and stops. Design and dimensions
OST 153-34.0-980-99А: Assembling units and support station pipeline details of nuclear power plants. Nominal pressure is no more than 4,0 MPa. Pads and fixed stops. Design and dimensions.
OST 153-34.0-987-99A: Assembly units and suspension parts of nuclear power plant station pipelines Py <= 4.0 MPa (40 kgf/cm2). Suspension unit with support beam. Design and dimensions
OST 153-34.0-989-99A: Assembly units and suspension parts of nuclear power plant station pipelines Py <= 4.0 MPa (40 kgf/cm2). Suspension unit clamp for vertical pipelines. Design and dimensions
OST 153-34.0-989-99А: Assembling units and station pipeline hang details of nuclear power plants. Nominal pressure is no more than 4,0 MPa. Saddle block of a hang for vertical pipelines. Design and dimensions.
OST 153-34.0-991-99A: Assembly units and suspension parts of nuclear power plant station pipelines Py <= 4.0 MPa (40 kgf/cm2). Suspension block with an earring. Design and dimensions
OST 153-34.0-991-99А: Assembling units and station pipeline hang details of nuclear power plants. Nominal pressure is no more than 4,0 MPa. The hang block with a clip. Design and dimensions.
OST 153-34.0-993-99A: Assembly units and suspension parts of nuclear power plant station pipelines Py <= 4.0 MPa (40 kgf/cm2). Suspension unit with crosshead. Design and dimensions
OST 153-34.0-993-99А: Assembling units and station pipeline hang details of nuclear power plants. Nominal pressure is no more than 4,0 MPa. The hang block with the cross bar. Design and dimensions.
OST 153-34.0-994-99A: Assembly units and suspension parts of nuclear power plant station pipelines Py <= 4.0 MPa (40 kgf/cm2). Eye. Design and dimensions
OST 153-34.0-994-99А: Assembling units and station pipeline hang details of nuclear power plants. Nominal pressure is no more than 4,0 MPa. The lug. Design and dimensions.
OST 153-34.0-997-99A: Assembly units and suspension parts of nuclear power plant station pipelines Py <= 4.0 MPa (40 kgf/cm2). Cover plate. Design and dimensions
OST 153-34.0-997-99А: Assembling units and station pipeline hang details of nuclear power plants. Nominal pressure is no more than 4,0 MPa. The lining pad. Design and dimensions.
OST 153-34.0-998-99A: Assembly units and suspension parts of nuclear power plant station pipelines Py <= 4.0 MPa (40 kgf/cm2). Fin. Design and dimensions
OST 153-34.0-998-99А: Assembling units and station pipeline hang details of nuclear power plants. Nominal pressure is no more than 4,0 MPa. The stud. Design and dimensions.
OST 153-34.0-999-99A: Assembly units and suspension parts of nuclear power plant station pipelines Py <= 4.0 MPa (40 kgf/cm2). Paw with lining for the suspension of vertical pipelines. Design and dimensions
OST 153-34.0-999-99А: Assembling units and station pipeline hang details of nuclear power plants. Nominal pressure is no more than 4,0 MPa. Clamp with lining pad for hang of vertical pipelines. Design and dimensions.
OST 24.125.110-01: CHP and NTPP pipeline suspensions. Crossbeam. Design and dimensions.
OST 24.125.121-01: CHP and NTPP pipeline suspensions. Support beams with lugs. Design and dimensions.
OST 24.191.08-81: Hook crane suspensions. Design and dimensions.
OST 24.200.02-91: Assembling units of steel pipelines on nominal pressure<=10 MPa (100 kgf/cm2) of complete technological lines. General specifications.
OST 24.201.03-90: Steel high-pressure vessels and devices. General technical requirements.
OST 26.260.758-2003: Metal structures. General technical requirements.
OST 26-04-0393-72: Air separation plants. Thermal bridges for internal fittings. Design and dimensions
OST 26-04-1035-74: Assembling units and fastening details of cold pipelines with a diameter from 100 to 1020 mm. Design and dimensions.
OST 26-04-1037-74: Holders and fasteners of cold pipes to each other. Construction and dimensions.
OST 26-04-1216-75: Cryogenic pipelines. Parts of disk supports. Design and dimensions.
OST 26-04-1250-75: Ranks of pipes for pipelines.
OST 26-04-2385-79: Transportation plugs for working P 0 MPa (0 kg/cm2), working P 0.04 MPa (0.4 kg/cm2). Design and dimensions.
OST 26-04-2387-79: Steel plugs to test vessels and apparatus for Py 0.1 MPa (1 kg/cm2), Py 0.6 MPa (6 kg/cm2). Design and dimensions.
OST 26-07-2027-80: Symbols of materials in the design documentation.
OST 26-291-94: Steel welded vessels and devices. General technical requirements.
OST 32.48-95: Air reservoirs for traction rolling stock. Overall and mounting dimensions and technical requirements
OST 34-10-474-89: Captivating welded and casted plates for turbo-units. Constant lining. Design and dimensions.
OST 34-10-475-89: Captivating welded and casted plates for turbo-units. Welded support. Design and dimensions.
OST 34-10-569-93: Axial single-lens compensator for Pnom ≤1.6 MPa (16 kg/cm2). Design and dimensions.
OST 34-10-570-93: Axial two-lens compensator for Pnom ≤1.6 MPa (16 kg/cm2). Design and dimensions.
OST 34-10-571-93: Axial three-lens compensator for Pnom ≤1.6 MPa (16 kg/cm2). Design and dimensions.
OST 34-10-573-93: Corner single-lens compensator for Pnom ≤1.6 MPa (16 kg/cm2). Design and dimensions.
OST 34-10-730-93: Suspension unit with eye bar. Design and dimensions.
OST 34-10-732-93: Suspension unit with cross head. Design and dimensions.
OST 34-10-733-93: Lug with lining. Design and dimensions.
OST 34-10-734-93: Fin with cover plate. Design and dimensions.
OST 34-10-735-93: Clip for horizontal pipelines. Design and dimensions.
OST 34-10-736-93: Clip for vertical pipelines. Design and dimensions.
OST 34-10-737-93: Supporting beams. Design and dimensions.
OST 34-10-738-93: Support with a plate. Design and dimensions.
OST 34-10-739-93: Threaded rods with coupling. Design and dimensions.
OST 34-10-740-93: Units of spring attachment. Design and dimensions.
OST 34-10-743-93: Spring unit. Design and dimensions.
OST 34-10-745-93: Mounting spring unit. Design and dimensions.
OST 34-42-353-77: Rolled ferrous metals and pipes for the manufacture of boiler auxiliary equipment and pipelines. Limit Assortment
OST 34-72-645-83: Steel structures of pylons with voltage of 0.38-35 kV. General Specifications.
OST 36-146-88: Bearings for steel industrial pipelines for P 10 MPa. Specifications.
OST 37.002.0444-77: Assembly units and fastening parts of overhead conveyors to the supporting metal structures. Construction and dimensions
OST 95 10170-86: Radiation-protective doors, hinged steel. Design and dimensions
OST 95 10439-2002: Equipment for radioactive environments. General technical requirements. Acceptance. Maintenance and repair.
OTT 1.5.2.01.999.0157-2013: The supporting structures of the elements of nuclear plants with water-cooled power reactors. General technical requirements
OTU 3-01: Vessels and apparatuses. General specifications for the repair of buildings
PB 03-381-00: Regulations of installation of vertical cylindrical steel reservoirs (steel scroll tanks) for petroleum and petroleum products
PB 03-384-00: Rules for design, manufacture and acceptance of steel welded vessels and apparatus
PGVU 090-93: Dust-gas and air pipelines of thermal power plants. General technical requirements
PGVU 242-92: Round lens compensators for gas and air ducts (DN 200 - 6000 mm). Round single-lens compensator for gas and air ducts
PGVU 243-92: Round lens compensators for gas and air ducts (DN 200 - 6000 mm). Round double compensator for gas and air ducts
PGVU 244-92: Round lens compensators for gas and air ducts (DN 200 - 6000 mm). Three-way round compensator for gas and air ducts
PGVU 245-92: Round lens compensators for gas and air ducts (DN 200 - 6000 mm). Four-sided round compensator for gas and air ducts
PGVU 246-92: Compensator, rectangular single lens for gas and air ducts
PGVU 247-92: Compensator, rectangular two-lens for gas and air ducts
PGVU 248-92: Three-slip rectangular compensator for gas and air ducts
PGVU 249-92: Four-sided rectangular compensator for gas and air ducts
PI 249-2000: Riveting of metal structures. application
PKO-2010.6: Reference materials for the design work of the electrical part of the project
PNAE G-10-031-92: Basic provisions for localizing safety system elements welding on nuclear stations
RD 153-006-02: Guidelines for the Welding Process in Construction and Renovation of Trunk Petroleum Pipelines
RD 204 USSR 157-84: Recommendations for the design and operation of silicate water treatment plants for corrosion protection of the internal surfaces of hot water pipelines
RD 22-16-2005*: Guiding regulatory material. Hoisting machines. Selection of materials for the manufacture, repair and reconstruction of welded steel structures
RD 24.030.142-88: Methodological instructions. Selection of steel products for construction of stationary boilers.
RD 26.260.16-2002: Expert technical diagnostics of vessels and equipment operating under pressure at gas and gas condensate and oil production and processing facilities in the northern regions of the Russian Federation and underground gas storage facilities
RD 31.44.06-89: Low loader semi-trailers. Repair Specifications
RD 31.55.08.01-89: Iron casting. Materials charge and auxiliary. Consumption rates
RD 34.10.306-88: Material allowances for repairs. Stationary steam boilers.
RD 34.15.132-96: Welding and Quality Control of Welded Joints in Metal Structures of Buildings During Construction of Industrial Facilities
RD 34.46.605: Transformers at Voltage of 110-1150 kV, with Power of 80 MVxA and Above
RD 34.47.603-79: Guidelines for the overhaul of high-voltage three-pole circuit breakers VMPE-10
RD 39-0147014-348-89: Guidelines for Corrosion Protection of Field Equipment Using Domestically Manufactured Inhibitors
RD 39-3-221-79: Instructions for corrosion protection of oilfield equipment using inhibitors of types IA, ID
RD EO 1.1.2.25.0937-2013: Nondestructive control. Uniform requirements for the form and content of technological maps
RD OP.42-001-85: Main provisions for welding and control of the NPP tanks (reservoirs)
RD ROSEK-006-97: Hoisting machines. Metal structures. Ultrasonic thickness gauging. Key Points
RD RTM 26-14-02-78: Materials
Recommendations: Aspiration smoke-sensitive alarms VESDA. Part 1. Scope
RM 4-150-92: Process automation systems. Integrated norms of consumption of materials and products
RM 4-206-95: Automation systems. Specification of equipment, products and materials. Directions for implementation. Allowance to GOST 21.110-95
RSN 342-86: Technology for reinforcing building structures in reconstructed enterprises
RST RSFSR 45-86: Sledge for children. Technical conditions
RST RSFSR 48-82: Furniture and wicker products. General technical conditions
RST RSFSR 516-88: Eaves metal. Technical conditions
RST RSFSR 643-80: Black steel economic dishes . General specifications
RTM 108.020.33-86: Labyrinth packings of stationary steam and gas turbines and compressors. Design and calculation
RTM 24-85: Information index of state, republican and industry standards, technical specifications for materials and products used in the design of furnaces and dryers
SanPiN 2.2.4/2.1.8.055-96: Physical Factors of the Industrial Environment. Physical Factors of the Ambient Medium Radiofrequency electromagnetic radiation (rf emr) Radiofrequency electromagnetic radiation (rf emr) under occupational and living conditions
SP 101-34-96: Set of rules for construction of trunk pipelines (SPSMG). Code of practice for selection of pipes for the construction of trunk gas pipelines. RAO "Gazprom", 11/15/90
SP 34-101-98: Selection of pipes for main oil pipelines during construction and repair
SP 53-101-98: Manufacturing and quality control of steel structures for construction
ST RK 1278-2004: Road restrictions systems. Metal safety barriers. Specification
ST RK 1454-2005: Air reservoir for traction railway stock. Basic requirements for structure
ST RK 1643-2007: Freight cars cast iron brake shoes. Specification
ST TsKBA 070-2009: Pipe fittings. Symbol of materials in the design documentation
STO 64235108-005-2016: Support rings OK. General requirements
STO 64235108-008-2016: Easily removable KL covers. General requirements
STO-SA-03-002-2009: Rules for the design, manufacture and installation of vertical cylindrical steel tanks for oil and oil products
TR 182-08: Technical recommendations on scientific and technical support and monitoring of the construction of long-span, high-altitude and other unique buildings and structures
TU 102-360-85: Aluminum aluminum masts for radio relay communication type MAP
TU 102-488-95: Connecting parts and nodes of trunk pipelines on RR up to 10 MPa (100 kgf / cm2)
TU 102-587-91: Production-auxiliary box
TU 112000-001-12586100-2009: Steel curved profiles for light steel structures. Technical conditions
TU 13.03-011-00212179-2003: Spiral-welded electric-welded pipes made of carbon steel 20 for pipelines of nuclear power plants. Technical conditions
TU 1303-002-08620133-01-TU-LU: Electrowelded pipes made of carbon and low alloy steels for steam and hot water pipelines
TU 14-105-465-82: Hot-rolled plate steel, heat-treated 14G2AF. Pilot batch
TU 14-2-369-79: Rolled metal sheets, broadband universal and shaped carbon steel with a differentiated level of mechanical properties. Pilot batch
TU 14-3-1428-86: Electric-Welded Straight-Seam Steel Pipes 1020 mm in Diameter for Gas and Oil Pipelines. Technical Specifications
TU 14-3-1430-87: Pipes, Seamless and Welded, Second-Grade
TU 14-3-1573-96: Steel electric welded longitudinal pipes with a diameter of 530-1020 mm with a wall thickness of up to 32 mm for main gas pipelines, oil pipelines and oil product pipelines
TU 14-3-377-99: Steel welded longitudinal welded pipes for main gas and oil pipelines
TU 14-3-808-78: Spiral-welded electrowelded carbon steel pipes 20 for pipelines of nuclear power plants
TU 14-3R-1471-2002: Northern-straight-seam electric-welded pipes for arranging oil and gas fields, main gas pipelines, oil and oil product pipelines of field pipelines. Technical specifications
TU 14-3R-56-2001: Welded steel pipes with a diameter of 1420, 1620, 1720, 2020 and 2220 mm for general use. Technical conditions
TU 1469-006-00153229-2001: Parts connecting on Рр up to 16 MPa (160 kgf
TU 34-38-20189-94: Gas-oil burners for steam stationary boilers. Technical conditions for major repairs
TU 34-38-20190-94: Burner, types pulverized steam stationary boilers. Technical conditions for major repairs
TU 34-38-20191-94: Headset stationary boilers. General technical conditions for major repairs
TU 36.16.22-64-92: Wrapping Clamps
TU 36-1181-77: Steps and elements of pressed flooring. Technical conditions
TU 36-1395905-015-95: A set of structures of buildings of arched type. Technical conditions
TU 3615-018-00217320-2006: Spherical tanks. Technical specifications
TU 3615-132-00220302-2008: Ball tanks for liquefied petroleum gases. Specifications
TU 36-2009-77: Steel structures of steel vertical cylindrical tanks with a capacity from 100 to 20,000 m3 for the storage of oil and oil products. Technical conditions
TU 36-2287-80: Bent closed welded square and rectangular profiles
TU 36-26-11-4-89: Steel building construction, vertical cylindrical tanks for oil and petroleum products with a volume of 100 to 50,000 m3. Technical conditions
TU 3631-002-76457067-2012: Dynamic Pumps and Pump Units MST-TsN type and spare parts for them
TU 3680-001-04698606-04: Pipe Support
TU 5210-001-25432924-2008: Fences, road, metal, barrier type
TU 5216-001-05765820-2007: Roadside restraints for automobiles, side, first, metal type
TU 5216-002-03910056-2008: Barrier metal fencing. Technical conditions
TU 5216-002-18601734-2000: Metal road holding guard for cars, side, first type, single-sided
TU 5216-006-44884945-2006: Barrier retaining barriers for cars, side in unilateral and bilateral execution of the pavement and road groups
TU 5216-017-00110604-02: Fences bridge, holding, for cars, side, first type, single-sided
TU 5216-020-00110604-03: Fences bridge, holding, for cars, side, first type, single-sided
TU 5216-021-00110604-03: Road guardrail for cars, side, first type, metal, single-sided
TU 5216-021-00110604-06: Fences bridge, holding, for cars, side, first type, double-sided
TU 5216-024-00110604-06: Fences bridge, holding, for cars, side, first type, double-sided
TU 5216-025-00110604-2006: Road safety rails, for vehicles, lateral, first type, double-sided
TU 5216-055-00110604-2007: Fences, road, holding for cars of barrier type, road and bridge groups, one-sided and two-sided
TU 5216-063-01393697-2006: Road and bridge fences for automobiles, side, first type, metal
TU 5216-067-36910961-2002: Retention fences, for vehicles, side, first type, single-sided and double-sided
TU 5216-067-36910961-97: Fences are road, holding, for cars, side, of the first type in one-sided and two-sided execution.
TU 5262-010-56506912-2004: Roadside restraints for cars, side, first type, metal. Technical conditions
TU 576431-009-01297858-99: Pipeline elements with polyurethane foam insulation. Technical conditions
TU 95.349-2000: Longitudinal electric-welded pipes from steel grades 08X18H10T, 12X18H10T for atomic electric and thermal stations. Technical specifications
VNTP 03-89: In-house process engineering standards for mill enterprises
VSN 10-83/Minhimprom: Instruction on designing of oxygen gas pipelines
VSN 130-92: Execution and Acceptance Requirements for Sealing Joints and Openings in Precast Tunnel Lining Installed Using Tunnel Boring Methods
VSN 315-80: Manual to design heat units liners for oil refining industry made of light refractory concrete and heat insulating materials.
VSN 429-81/MMSS SSSR: Instruction for the design of lining for the industrial furnaces, made of refractory fibrous materials
VSN 464-85: General Specified Quantity Allowances for Building Materials. Compendium 20: Installation of Industrial Ventilating Systems
VSN 50-83: Design Guidelines for Piping for Liquid Products of Air Separation
Customers Who Viewed This Item Also Viewed:
 |
Building materials. Methods for combustibility test
Language: English |
Cylindrical evolvent gears of external engagment. Strength calculation
Language: English |
Building materials spread flame test method
Language: English |
Food products, food raw materials. Method for determination of the non-steroidal anti-inflammatory drug residue content by high performance liquid chromatography – mass spectrometry
Language: English |
Steel welded vessels and apparatus. General technical conditions
Language: English |
Plywood for general use with outer layers of deciduous veneer. Specifications
Language: English |
System of Standards for Occupational Safety and Health (SSBT). Personal protective equipment for respiratory organs. Self-rescuers insulating on chemically bound or with compressed oxygen. Technical requirements. Test methods. Marking. Sampling rules
Language: English |
 |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.