imgalt

GOST 535-88

ГОСТ 535-88

Common quality carbon bar and shaped sections. General specifications

Прокат сортовой и фасонный из стали углеродистой обыкновенного качества Общие технические условия

Status: Not effective - Superseded

The standard applies to hot-rolled sections and shapes of general and special purpose of carbon steel of ordinary quality.

Стандарт распространяется на горячекатаный сортовой и фасонный прокат общего и специального назначения из стали углеродистой обыкновенного качества.

Choose Language: 
Format: Electronic (pdf/doc)

Approved: USSR State Committee for Standards, 3/23/1988

SKU: RUSS16597

Price: $168.00



imgalt

The Product is Contained in the Following Classifiers:

Construction (Max) » Standards » Other state standards used in construction » 77 Metallurgy »

PromExpert » SECTION I. TECHNICAL REGULATION » V Testing and control » 4 Testing and control of products » 4.12 Testing and control of products of metallurgical industry » 4.12.4 Iron and steel products »

ISO classifier » 77 METALLURGY » 77.140 Iron and steel products » 77.140.50 Steel sheet products and semi-finished products »

National standards » 77 METALLURGY » 77.140 Iron and steel products » 77.140.50 Steel sheet products and semi-finished products »

National Standards for KGS (State Standards Classification) » Latest edition » V Metals and metal products » V2 Carbon steel of ordinary quality (ordinary stock) » V22 Rolled and shaped steel »

National Standards for OKSTU » FINISHED ROLLED STEELS (INCLUDING BILL FOR EXPORT) » Long products of ordinary quality »


The Document is Replaced With:

GOST 535-2005: Common quality carbon steel bar and shaped sections. General specifications

As a Replacement Of:

GOST 535-79: Rolled high-quality carbon steel of ordinary quality. Specification

The Document References:

GOST 103-76: Hot-rolled steel strip. Dimensions

GOST 14019-80: Metals. Methods of bend tests

GOST 1497-84: Metals. Methods of tension test

GOST 162-90: Depth gauges. Specifications

GOST 166-89: Vernier callipers. Specifications

GOST 17152-89: Steel hot-rolled shapes for cutting blades of earth-moving machines. General specifications

GOST 17745-90: Steels and alloys. Methods for determination of gases

GOST 18662-83: CВП-hot-rolled section for mine timbering. Dimensions

GOST 18895-81: Steel. Method of photoelectric spectral analysis

GOST 18895-97: Steel. Method of photoelectric spectral analysis

GOST 19240-73: Rails for ground and suspended tracks. Dimensions

GOST 19425-74: Special-purpose steel I-beams and channels. Dimensions

GOST 21026-75: Hot-rolled sections with outward flanges for trolleys. Dimensions

GOST 2216-84: Adjustable smooth snap gauges

GOST 22536.0-87: Carbon steel and unalloyed cast iron. General requirements for methods of analysis

GOST 22536.10-77: Carbon steel and unalloyed cast iron. Methods for determining aluminum content

GOST 22536.10-88: Carbon steel and unalloyed cast iron. Methods for determination of alluminium

GOST 22536.11-87: Carbon steel and unalloyed cast iron. Methods for determination of titanium

GOST 22536.1-88: Carbon steel and unalloyed cast iron. Methods for determination of general carbon and graphite

GOST 22536.2-87: Carbon steel and unalloyed cast iron. Methods for the determination of sulfur

GOST 22536.3-88: Carbon steel and unalloyed cast iron. Methods for determination of phosphorus

GOST 22536.4-88: Carbon steel and unalloyed cast iron. Methods for determination of silicon

GOST 22536.5-87: Carbon steel and unalloyed cast iron. Methods for determination of manganese

GOST 22536.6-88: Carbon steel and unalloyed cast iron. Methods for determination of arsenic

GOST 22536.7-88: Carbon steel and unalloyed cast iron. Methods for determination of chromium

GOST 22536.8-87: Carbon steel and unalloyed cast iron. Methods for determination of copper

GOST 22536.9-88: Carbon steel and unalloyed cast iron. Methods for determination of nickel

GOST 2590-88: Round steel bars. Dimensions

GOST 2591-88: Square Hot-rolled Steel Bars Dimensions

GOST 26020-83: Hot-rolled steel I-beam with parallel flange edges. Dimensions.

GOST 27809-88: Steel and cast iron. Methods of spectroorganic analysis

GOST 2879-88: Hot-rolled hexagonal steel. Range of sizes

GOST 3749-77: Checking 90° squares. Specifications

GOST 380-71: Common quality carbon steel. Grades

GOST 380-94: Normal quality carbon steel

GOST 427-75: Measuring metal rules. Basic parameters and dimensions. Specifications

GOST 535-79: Rolled high-quality carbon steel of ordinary quality. Specification

GOST 5378-88: Vernier protractors. Specifications

GOST 6507-90: Micrometers. Specifications

GOST 7268-82: Steel. Method for determination of ability to mechanical aging by impact bend testing

GOST 7502-98: Measuring metal tapes. Specifications

GOST 7564-73: Steel. General rules of samples, blanks and test pieces for mechanical and technological tests

GOST 7564-97: Rolled products general rules of samples, rough specimens and test pieces selection for mechanical and technological testing

GOST 7565-81: Iron, steel and alloys. Sampling for determination of chemical composition

GOST 7566-81: Rolled stock and products for further treatment

GOST 7566-94: Metal products

GOST 8.326-89: State system for ensuring the uniformity of measurements. Metrological certification measuring instruments

GOST 8239-89: Steel hot-rolled I-beams

GOST 8240-97: Hot-rolled steel channels. Assortment

GOST 8509-86: Rolled angular equilateral steel

GOST 8509-93: Hot-rolled steel equal-leg angles. Dimensions

GOST 8510-86: Hot-rolled steel unequal-leg angles. Dimensions

GOST 9454-78: Metals. Method for testing the impact strength at the low, room and high temperature

PR 50.2.009-94: The testing and approval procedure for the measurement instrumentation

The Document is Referenced By:

ATK 24.218.01-90: Bosses, Plugs, and Gaskets. Design, Dimensions, and General Technical Specifications

GOST 11776-74: Moulding tampers. Design

GOST 11799-74: Long vent needles. Design

GOST 11800-74: Short vent needles. Design

GOST 12393-77: Fittings for overhead system of electric railways. General specifications

GOST 12492.0-90: Rolled stock for agriculture machinery

GOST 12492.10-90: Agricultural machinery. Trapezoidal section for points. Dimensions

GOST 12492.13-90: Agricultural machinery. C-shaped section. Dimensions

GOST 12492.14-90: Agricultural machinery. Section for end transmission case. Dimensions

GOST 12492.1-90: Agricultural machinery. Channel section. Dimensions

GOST 12492.2-90: Agricultural machinery. Low-channel section. Dimensions

GOST 12492.3-90: Agricultural machinery. Bulged strip section. Dimensions

GOST 12492.4-90: Agricultural machinery. One-notched section. Dimensions

GOST 12492.5-90: Agricultural machinery. Section for wheel rims. Dimensions

GOST 12492.8-90: Agricultural machinery. Rounded strip section. Dimensions

GOST 12767-94: Reinforced concrete solid slabs for floors in lange-panel buildings. General specifications

GOST 12816-80: Flanges for valves, fittings and pipelines for Pnom from 0,1 to 20 MPa (from 1 to 200 kgf/sq sm). General technical requirements

GOST 1335-84: Rubber brake hoses with thread reinforcement for railroad and subway transport without couplings

GOST 14110-97: Reusable semi rigid slings

GOST 1577-93: Plate and broadband roll stock of construction fine steel.

GOST 16561-76: Metal accessories for wood containers. Specifications

GOST 17129-71: Rectangular weld moulding boxes of cast steel elements having inside dimensions: length from 600 to 900 mm, width from 500 to 700 mm, height from 125 to 400 mm. Construction and dimensions

GOST 17130-71: Rectangular weld moulding boxes of cast steel elements having inside dimensions: length from 900 to 1200 mm, width 700; 800 mm, height from 150 to 400 mm. Construction and dimensions

GOST 17131-71: Rectangular weld moulding boxes of cast steel elements having inside dimensions: length from 1000 to 1200 mm, width 700; 800 mm, height 450; 500 mm. Construction and dimensions

GOST 18579-79: Lifting devices of middle size freight containers with rating to 6 ton for general and specific cargoes. Specifications

GOST 19240-73: Rails for ground and suspended tracks. Dimensions

GOST 19281-89: Rolled steel with increased strength. General specifications

GOST 19386-74: Cramps for core boxes. Design and dimensions

GOST 19387-74: Handles for core boxes. Design and dimensions

GOST 19392-74: Channels for fixing of drging plates to core boxes. Design and dimensions

GOST 19425-74: Special-purpose steel I-beams and channels. Dimensions

GOST 2.109-73: Unified system for design documentation. Basic requirements for drawings

GOST 21133-87: Specialized box pallets for potatoes, vegetables, fruits, melons and gourds

GOST 21519-84: Windows, balcony doors, shop-windows and stained glass panels of aluminum alloys

GOST 22328-93: Wedge strainers for wooden split core boxes. Design

GOST 22329-93: Screw strainers for wooden split core boxes. Design

GOST 22331-93: Plote lifting screws for wooden cast patterns. Design

GOST 22333-93: Bolt lifting screw for wooden cast patterns. Design

GOST 22343-90: Clamp for indirect rail fastening of railways. Specifications

GOST 23092-78: Sectional pallet box for topographical maps. Specifications

GOST 23747-88: Doors of aluminium alloys. Specifications

GOST 24379.0-80: Foundation bolts. General specification

GOST 25912.4-91: Structure fittings and mountings products of reinforced concrete slabs for aerodrome pavement. Construction

GOST 26145-84: X-ray medical cassettes

GOST 26686-96: Flat car backtone railroad bore 1520 mm gauge. General technical specifications

GOST 26725-97: Freight gondolas for main lines with the track 1520 mm. General specifications

GOST 27772-88: structural steel structure rolled products. General specifications

GOST 29166-91: Mechanical attractions. Steel structures. Principal rules of the design

GOST 30565-98: Hot-rolled steel shapes for machine-Building in chemical engineering and oil industry. General specifications

GOST 30765-2001: Metal transport packagings. General specifications

GOST 3280-84: Plates for spike fastening of railway. Specifications

GOST 5267.0-90: Hot-rolled sections for car building. General specifications

GOST 535-2005: Common quality carbon steel bar and shaped sections. General specifications

GOST 5422-73: Hot-rolled special steel sections for tractors. Technical specifications

GOST 5521-86: Weldable steel for shipbuilding

GOST 5521-93: Shipbuilding rolled steel

GOST 5812-82: Tie-cotters for broad gage railway

GOST 6247-79: Steel welded barrels with rolling hoops on the shell

GOST 6713-75: Low-alloyed structural rolled stock for bridge building. Specifications

GOST 6713-91: Low-alloyed structural rolled stock for bridge building. Specifications

GOST 7075-80: Manual Traveling Underrunning Cranes Specifications

GOST 7511-73: Steel sections for window and lantern transoms and window panels of industrial buildings. Specifications

GOST 8141-56: Fasteners for narrow gauge railways. Fishplates. General specifications

GOST 8142-89: Rail soles for R18, P24, P33 rail types

GOST 8320.0-83: Periodic sections produced by helical rolling. General technical requirements

GOST 9074-85: Joined by pins slot cloths

GOST R 51748-2001: Metal frame yield supports. Arch support. General specifications

GOST R 52018-2003: Shaft sinking hoppets. Specifications

GOST R 52042-2003: Anchor supports. General specifications

GOST R 52170-2003: Mechanized attractions safety. Principal rules of the design of steel constructions

GOST R 52212-2004: Shooting-galleries. Armoured protection and technical resistance to burglary. General technical requirements

GOST R 52664-2006: Welded pipe sheet piles. General specifications

GOST R 54270-2010: Masts (Poles) for overhead contact line supports of railways. Specifications

GOST R 55186-2012: Cross beams of rigid portals for overhead contact line of railway transport. General specifications

IM 4-12-95: Automation systems. Handbook of materials. Part 1. Basic materials

MDS 12-61.2012: The project for the production of works on the device of a rail track of a tower crane with a concrete beam BRP-62.8.3

MR 21.01-95: Methodological recommendations for drawing up a specification on equipment, items and materials (with account for new requirements of spds standards)

NRP-93: Norms for strength calculation of transport packaging kits for transportation of nuclear fissile materials

ODM 218.2.002-2008: Recommendations for the design and installation of polymer bridge bearing parts

OST 108.030.124-85: Details and prefabricated units made of pearlitic steels for pipelines with environment pressure P>2.2 MPa (22 kg/cm2) in nuclear power plants. General Specifications.

OST 108.764.01-80: Cylindrical helical springs for CHP plant and NTP plant pipeline hangers. Construction, dimensions and specifications.

OST 108.780.102-76: Water-steam heaters. Tubing. Bolt. Design and dimensions.

OST 153-34.0-1000-99A: Assembly units and suspension parts of nuclear power plant station pipelines Py <= 4.0 MPa (40 kgf/cm2). Threaded with clutch. Design and dimensions

OST 153-34.0-1000-99А: Assembling units and station pipeline hang details of nuclear power plants. Nominal pressure is no more than 4,0 MPa. Threaded drafts with coupling. Design and dimensions.

OST 153-34.0-1001-99A: Assembly units and suspension parts for nuclear power plant station pipelines Py <= 4.0 MPa (40 kgf/cm2). Suspension mounting block. Design and dimensions

OST 153-34.0-1001-99А: Assembling units and station pipeline hang details of nuclear power plants. Nominal pressure is no more than 4,0 MPa. Block of hang fastening. Design and dimensions.

OST 153-34.0-971-99A: Assembly units and support parts of the station piping of nuclear power plants Py <= 4.0 MPa (40 kgf/cm2). Sleeve for passage through the roof. Design and dimensions

OST 153-34.0-972-99A: Assembly units and support parts for station pipelines of nuclear power plants Py <= 1.6 MPa (16 kgf/cm2). Support welded sliding, directing and motionless. Design and dimensions

OST 153-34.0-972-99А: Assembling units and support station pipeline details of nuclear power plants. Nominal pressure is no more than 1,6 MPa. The support is welded and sliding, guide rail and fixed. Design and dimensions.

OST 153-34.0-976-99A: Assembly units and parts of the supports of the station pipelines of nuclear power plants Py <= 2.5 MPa (25 kgf/cm2). Shells welded sliding supports, guides and fixed. Design and dimensions

OST 153-34.0-976-99А: Assembling units and support station pipeline details of nuclear power plants. Nominal pressure no more than 2,5 MPa. The holder of the welded and sliding, guide rail and fixed supports. Design and dimensions.

OST 153-34.0-977-99A: Assembly units and support parts for station piping of nuclear power plants Py <= 4.0 MPa (40 kgf/cm2). Plates guides. Design and dimensions

OST 153-34.0-977-99А: Assembling units and support station pipeline details of nuclear power plants. Nominal pressure is no more than 4,0 MPa. The guide rail plates. Design and dimensions.

OST 24.125.116-01: CHP and NTPP pipeline suspensions. Clamp units with cross-bar. Design and dimensions.

OST 24.125.121-01: CHP and NTPP pipeline suspensions. Support beams with lugs. Design and dimensions.

OST 24.125.125-01: CHP and NTPP pipeline suspensions. Welded suspensions on support beam with lugs. Design and dimensions.

OST 24.125.126-01: CHP and NTPP pipeline suspensions. Spring welded suspensions on support beam. Design and dimensions.

OST 24.125.153-01: Fixed and sliding welded supports for thermal and nuclear power plants piping. Design and dimensions.

OST 24.125.157-01: Guiding plates for CHP plants and nuclear thermal power plant pipeline supports. Design and dimensions.

OST 26.260.460-99: Lobes, locks and pads. Design, dimensions and general technical requirements.

OST 26.260.758-2003: Metal structures. General technical requirements.

OST 26-01-147-89: Drying devices with rotating drums. General technical requirements.Printing telegraph and terminals for document electric communication. Methods of printed character parameter measurement.

OST 26-02-757-79: Ladders. Design, dimensions and specifications.

OST 26-04-0386-72: Air separation plants. Supports for attachment internal fittings. Design and dimensions

OST 26-04-0392-72: Air separation plants. Supports for attachment internal fittings. Design and dimensions

OST 26-04-0394-72: Air separation plants. Thermal bridges for internal fittings. Design and dimensions

OST 26-04-1041-74: Support for t warm-air pipelines with diameter from 325 to 1020 mm. Design and dimensions.

OST 26-04-1043-74: Support of high-alloy r steel for cold pipes. Design and dimensions.

OST 26-07-2027-80: Symbols of materials in the design documentation.

OST 26-2011-83: Welded vessels and apparatus hatches. Technical requirements.

OST 26-2015-83: Hinge and tilt-up Devices for manhole covers of welded steel of vessels and apparatuses. Technical requirements .

OST 26-2043-91: Bolts, studs, nuts and washers for flanged joints. Technical requirements

OST 26-291-94: Steel welded vessels and devices. General technical requirements.

OST 32.48-95: Air reservoirs for traction rolling stock. Overall and mounting dimensions and technical requirements

OST 34-10-474-89: Captivating welded and casted plates for turbo-units. Constant lining. Design and dimensions.

OST 34-10-573-93: Corner single-lens compensator for Pnom ≤1.6 MPa (16 kg/cm2). Design and dimensions.

OST 34-10-737-93: Supporting beams. Design and dimensions.

OST 34-10-740-93: Units of spring attachment. Design and dimensions.

OST 37.002.0444-77: Assembly units and fastening parts of overhead conveyors to the supporting metal structures. Construction and dimensions

OTU 3-01: Vessels and apparatuses. General specifications for the repair of buildings

PB 03-108-96: Process pipeline design and safe operation rules

PB 03-381-00: Regulations of installation of vertical cylindrical steel reservoirs (steel scroll tanks) for petroleum and petroleum products

PB 03-384-00: Rules for design, manufacture and acceptance of steel welded vessels and apparatus

PB 03-576-03: Regulations of design and safe operation of pressure vessels

PB 10-05-92: Installation and Safe Operation Requirements for Electrode Boilers and Boiler Plants

PB 10-115-96: Regulations of design and safe operation of pressure vessels

PB 10-575-03: Requirements for the Design and Safe Operation of Electric Boilers and Electric Boiler Plants

PGVU 090-93: Dust-gas and air pipelines of thermal power plants. General technical requirements

PGVU 136-92: Unified dust and air duct elements. Rigging details. Design and dimensions. Technical requirements

PGVU 242-92: Round lens compensators for gas and air ducts (DN 200 - 6000 mm). Round single-lens compensator for gas and air ducts

PGVU 243-92: Round lens compensators for gas and air ducts (DN 200 - 6000 mm). Round double compensator for gas and air ducts

PGVU 244-92: Round lens compensators for gas and air ducts (DN 200 - 6000 mm). Three-way round compensator for gas and air ducts

PGVU 245-92: Round lens compensators for gas and air ducts (DN 200 - 6000 mm). Four-sided round compensator for gas and air ducts

PGVU 246-92: Compensator, rectangular single lens for gas and air ducts

PGVU 247-92: Compensator, rectangular two-lens for gas and air ducts

PGVU 248-92: Three-slip rectangular compensator for gas and air ducts

PGVU 249-92: Four-sided rectangular compensator for gas and air ducts

PNAE G-7-008-89: Regulations for design and safe operation of equipment and piping of atomic power plants

R 18-76/NIIZhB: Recommendations for determining the flatness and non-perpendicularity of the faces of control samples of concrete

R 52.08.665-2004: Pinwheel marine VMM. Straight pool testing method

RD 10-117-95: Requirements for Installation and Safe Operation of Rail Tracks of Gantry Cranes

RD 22-16-2005*: Guiding regulatory material. Hoisting machines. Selection of materials for the manufacture, repair and reconstruction of welded steel structures

RD 22-28-35-99: Design, construction and safe operation of the rail tracks of tower cranes

RD 24.090.52-90: Lifting-transport machines. Materials for welded metal structures.

RD 34.10.306-88: Material allowances for repairs. Stationary steam boilers.

RD 34.15.132-96: Welding and Quality Control of Welded Joints in Metal Structures of Buildings During Construction of Industrial Facilities

RD 34.45.614: Guide to Overhaul of Turbine Generators TVF-120-2 and TVF-100-2

RD 34.46.605: Transformers at Voltage of 110-1150 kV, with Power of 80 MVxA and Above

RD 34.47.603-79: Guidelines for the overhaul of high-voltage three-pole circuit breakers VMPE-10

RD 34.47.615-75: Manual overhaul of the oil circuit breaker VMK-110-2000-12, 5 VI

RD 36-62-00: Hoisting equipment. General technical requirements.

RD 50:48:0075.01.05: Recommendations on organization and safe operation of ground gantry rails.

RD EO 0657-2006: Methods of assessing the technical condition and resource characteristics of systems and means of fire protection of nuclear power units

RD RTM 26-14-02-78: Materials

Recommendations: Aspiration smoke-sensitive alarms VESDA. Part 1. Scope

RST RSFSR 655-81: Ice screws fishing. General technical conditions

RST RSFSR 91-78: Percussion musical instruments. General technical requirements

RTM 393-94: Technical Guides for welding and quality control of the joints of reinforcement and embedded items of concrete elements

SA 03-005-07: Industrial pipelines of oil-refining, petrochemical and chemical industry. Requirements to configuration and operation

SNiP 2.03.01-84: Concrete and reinforced concrete structures

SNiP 2.05.03-84*: Bridges and pipes (Appendices 1-20)

SNiP 2.05.03-84*: Bridges and pipes (Appendices 21-29)

SNiP 3.06.04-91: Bridges and pipes

SP 16.13330.2011: Steel structures

SP 53-102-2004: General rules for steel structure design

ST RK 1454-2005: Air reservoir for traction railway stock. Basic requirements for structure

ST RK 1667-2007: Materials of construction for the body of passenger cars and multiple units. Technical requirements and testing methods

ST RK 1858-2008: Bridgeworks and culverts on motor roads. Requirements at designing of concrete and reinforced concrete structures

ST TsKBA 025-2006: Pipe fittings. Welding and quality control of welded joints. Technical requirements

STB 1026-2008: Section metal railing for bridges and overpasses. Technical conditions

STN TsE 141-99: Design norms for contact network

STO-SA-03-002-2009: Rules for the design, manufacture and installation of vertical cylindrical steel tanks for oil and oil products

TU 102-237-85: Mobile buildings (inventory) of the block of the "Watch" system. Group specifications

TU 102-356-83: Three-layer roofing panels from steel corrugated profile and mineral wool insulation

TU 102-529-89: Mobile buildings (inventory) of the block-containers of the panel construction of the Neftegazstroy system

TU 14-2-204-76: Hot-rolled steel. Channels thin-walled with narrow parallel shelves. Technical conditions

TU 14-2-24-72: Hot-rolled steel. I-beams and brands with parallel edges of shelves. Assortments. Technical conditions

TU 5831-001-54735376-2004: Specifications. Three-layer reinforced concrete panels with flexible fiberglass connections for exterior walls of Styrod system buildings

Customers Who Viewed This Item Also Viewed:

imgalt imgalt
State system for ensuring the uniformity of measurements. Measurements of liquids and gases flow rate and quantity by means of orifice instruments. Part 5. Measurement procedure
Language: English
Price: $634.00
imgalt
Petroleum products. Method for measurement of viscosity by automatic capillar viscosimeter
Language: English
Price: $87.00
imgalt
Greases. Method for determination of ultimate strength and thermostrengthening
Language: English
Price: $71.00
imgalt
Electric heating devices for heating rolling stock railways. Safety requirements and test methods
Language: English
Price: $139.00
imgalt
Ice cream. General technical requirements
Language: English
Price: $162.60
imgalt
Pipe fittings. Ball valves made of brass. General specifications
Language: English
Price: $398.00
imgalt

YOUR ORDERING MADE EASY!

RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.

Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.

We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.

Placing Your Order

Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).

Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.

For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.

For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.

Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.

Your Order Best Quality and Authenticity Guarantee

Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).

We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.

We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.

All Codes and Regulations

All Categories

Send us a message Expand Collapse

Leave your message in the form below, and we will write back by e-mail!