imgalt

GOST 7473-94

ГОСТ 7473-94

Ready-mixed concrete. Specifications

Смеси бетонные. Технические условия

Status: Not effective - Superseded

The standard applies to concrete mixes of constructional heavy and light concrete of dense, porous and large-pore structure on cementitious binders, dense and porous coarse and fine aggregates, delivered to the consumer for the construction of monolithic and prefabricated monolithic structures and structures or used in an enterprise for the manufacture of precast concrete and reinforced concrete designs and products. The standard does not apply to concrete mixes of special concretes and structural concretes based on lime, slag, gypsum and special binders and concretes on special aggregates.

Стандарт распространяется на бетонные смеси конструкционных тяжелых и легких бетонов плотной, поризованной и крупнопористой структуры на цементных вяжущих, плотных и пористых крупных и мелких заполнителях, отпускаемые потребителю для возведения монолитных и сборно-монолитных конструкций и сооружений или используемые на предприятии для изготовления сборных бетонных и железобетонных конструкций и изделий. Стандарт не распространяется на бетонные смеси специальных бетонов и конструкционных бетонов на основе известковых, шлаковых, гипсовых и специальных вяжущих и бетонов на специальных заполнителях.

Choose Language: 
Format: Electronic (pdf/doc)

Approved: Ministry of Construction of Russia, 6/26/1995

SKU: RUSS16600

Price: $316.00



imgalt

The Product is Contained in the Following Classifiers:

Construction (Max) » Regulations » Documents System of normative documents in construction » 6. Regulatory documents for building materials and products » k.62 Concretes and mortars »

ISO classifier » 91 CONSTRUCTION MATERIALS AND CONSTRUCTION » 91.100 Building Materials » 91.100.30 Concrete and concrete products »

National standards » 91 CONSTRUCTION MATERIALS AND CONSTRUCTION » 91.100 Building Materials » 91.100.30 Concrete and concrete products »

National Standards for KGS (State Standards Classification) » Latest edition » Zh Construction and building materials » Zh1 Construction materials » Zh13 Concretes and mortars »


The Document is Replaced With:

GOST 7473-2010: Fresh concrete. Specifications

As a Replacement Of:

GOST 7473-85: Ready-mixed concrete. Specification

The Document References:

GOST 10060.0-95: Methods for the determination of frost-resistance. General requirements

GOST 10060.1-95: Concretes, Basic Method For The Determination Of Frost-Resistance

GOST 10060.2-95: Concretes, rapid method for the determination of frost-resistance by repeated alternated freezing and thawing

GOST 10060.3-95: Concretes. Dilatometric rapid method for the determination of frost-resistance

GOST 10060.4-95: Concretes. Structure-mechanical rapid method for the determination of frost-resistance

GOST 10180-90: Concretes. Methods for strength determination using reference specimens

GOST 10181-2000: Concrete Mixtures Test method

GOST 10354-82: Polyethylene film Specifications

GOST 12730.1-78: Concretes. Methods of determination of density

GOST 12730.5-84: Concretes. Methods for determination of water tightness

GOST 17623-87: Concrete. Radioisotope method of average density determination

GOST 17624-87: Concrete. Ultrasonic method of strength determination

GOST 18105-86: Concretes. Rules for the strength control

GOST 2226-88: Paper bags

GOST 22690-88: Concretes. Determination of strength by mechanical methods of nondestructive testing

GOST 23732-79: Water for concretes and mortars. Specifications

GOST 25820-2000: Lightweight aggregates concretes. Specifications

GOST 26633-91: Heavy-weight and sand concretes. Specifications

GOST 27005-86: Light-weight and cellular concretes. Rules of average density control

GOST 27006-86: Concretes. Rules for mix proportioning

GOST 28570-90: Concretes. Methods of strength evaluation on cores drilled from structures

GOST 30108-94: Building materials and elements. Determination of specific activity of natural radioactive nuclei

GOST 7473-85: Ready-mixed concrete. Specification

The Document is Referenced By:

GOST 10181-2000: Concrete Mixtures Test method

GOST 13015-2003: Concrete and reinforced concrete products for construction. General technical requirements. Rules for acceptance, marking, transportation and storage

GOST 16349-85: Cyclic mixers for building materials

GOST 17608-91: Footway concrete slabs. Specifications

GOST 18105-86: Concretes. Rules for the strength control

GOST 20910-90: Refractory concretes. Specifications

GOST 25820-2000: Lightweight aggregates concretes. Specifications

GOST 26633-91: Heavy-weight and sand concretes. Specifications

GOST 27005-86: Light-weight and cellular concretes. Rules of average density control

GOST 27339-93: Mixer trucks

GOST 30459-2003: Additives for concretes and mortars. Methods of determining the efficiency

GOST 30459-2008: Admixtures for concretes and mortars. Determination and estimate of the efficiency

GOST 30459-96: Concrete additives

GOST 31356-2007: Dry building cement binder mixes. Test methods

GOST 31358-2007: Dry building flooring cement binder mixes. Specifications

GOST 6665-91: Concrete and Reinforced Concrete Curbs. Specifications

GOST 7473-2010: Fresh concrete. Specifications

GOST 9758-86: Non-organic porous aggregates for construction work

GOST R 42.4.01-2014: Civil defence. Civil defence constructions. Test methods

GOST R 51263-99: Concrete with polysterene aggregates. Specifications

GOST R 52751-2007: Steel-fibro-concrete slabs for bridge spans. Specifications

GOST R 53231-2008: Concretes. Rules for control and assessment of strength

Instruction 23-02: Instruction on transportation and pouring of concrete in monolithic constructions by means of transit concrete mixers and concrete pumpers

MDS 12-23.2006: Temporary recommendations on the technology and organization of construction of multifunctional high-rise buildings and building complexes in Moscow

MRDS 02-08: Manual on scientific and technical support and monitoring of buildings and structures under construction, including long-span, high-altitude and unique

ODM 218.2.002-2009: Guidelines for the use of modern materials in the mating pavement with the expansion joints of bridge structures

ODM 218.3.012-2011: Cements for concrete coatings and road foundations

OSN-APK 2.10.32.001-04: Instructions for the use of chemical additives in concrete and mortars for rural construction

R 589-86: Recommendations for ballasting of pipelines at underwater crossings

RD 03-25-2003: Typical program of inspection of the state of construction work at nuclear facilities

RD 11-08-2008: Standard inspection program during state construction supervision of nuclear facilities

RD 34.26.203: Guidelines for Brick Lining Work During Installation of Boiler Plants and Energy Facilities

RD EO 1.1.2.05.0696-2006: Guidelines for the construction and commissioning of the foundations of turbine units of nuclear power plants

RD EO 1.1.2.05.0697-2006: Guide to the construction and commissioning of reinforced concrete tower cooling towers of nuclear power plants

Recommendations 102-04: Recommendations on concreting of the structures by means of concrete pump when transportation of concrete mixture by concrete mixer trucks

RTM 17-01-2002: Guiding technical materials on the design and use of steel-fiber-concrete building structures

RTM 17-02-2003: Guiding technical materials on the design and manufacture of steel-fiber-concrete structures on fiber, cut from sheet

RTM 17-03-2005: Guiding technical materials on the design, manufacture and use of steel fiber concrete structures on steel wire fiber

RTM 5-05-2009: Guiding technical materials for the design, manufacture and use of steel fiber concrete structures on the fiber of thin steel wire

RTM 75-95: Process Guidelines for Factory Production of Prefabricated Prestressed Reinforced Concrete Structures -

Rules on the Selection of Pressure Vessels and Equipment: Instruction on the selection of pressure vessels and devices operating under pressure of 100 kgf/cm2 and overpressure protection, Ministry of Petroleum Energy

SNiP 3.09.01-85: Precast reinforced concrete structure and work-piece production

SNiP 52-01-2003: Concrete and ferroconcrete structures. Principal rules

SNiP 82-02-95: Federal (standard) element cement consumption rates at manufacture of concrete and reinforced concrete products and structures

SP 121.13330.2012: Aerodromes

SP 23-101-2000: Design of thermal performance of buildings

SP 23-101-2004: Design of thermal protection of buildings

SP 37.13330.2012: Industrial transport

SP 46.13330.2012: Bridges and pipes

SP 50-102-2003: Design and construction of soil bases and foundations for buildings and structures

SP 52-104-2006: Steel fibre reineorced concrete structures

SP 52-117-2008*: Reinforced concrete spatial structures of coatings and floors. Part I. Calculation methods and design

SP 63.13330.2012: Concrete and reinforced concrete structures. General provisions.

SP 70.13330.2012: Bearing and enclosing structures. Updated living edition of SNiP 3.03.01-87

SP 78.13330.2012: Automobile roads

TR 100-99: Recommended Practice for Construction of Auger Pile Foundations within the Area of Existing Development

TR 134-03: Technical recommendations for the installation and commissioning of pavements, taking into account the requirements of international standards for evenness

TR 162-04: Technical recommendations on the use of reinforced concrete pipes with an inner plastic sheath

TR 165-05: Technical recommendations on the establishment of durability (service life) of building materials and products

TR 166-04: Technical recommendations for quality assurance of concrete and mortar mixes and prevention of concrete corrosion in reinforced concrete structures

TR 182-08: Technical recommendations on scientific and technical support and monitoring of the construction of long-span, high-altitude and other unique buildings and structures

TR 50-180-06: Technical recommendations for the design and installation of pile foundations using discharge-pulse technology for high-rise buildings

TU 102-300-81: Weights prefabricated reinforced concrete covering type UBO

TU 102-737-95: Concrete marsh weighting compounds wedge-shaped for pipes with a diameter of 426, 325, 219 (ZUBKm)

TU 218 RSFSR 620-90: Hard concrete mixes for the construction of cement concrete pavements and foundations of roads and airfields

TU 5745-001-01386160-001: Dispersed concrete mixes-reinforced with steel fiber milled from slab

TU 5851-008-01388383-2002: Reinforced concrete beams with frame fittings for the superstructure of road bridges and overpasses with a length of 12, 15 and 18 m. Specifications

TU 5853-001-04000633-2006: Adjustable tip manholes. Technical conditions

VSN 16-95: Industry-Specific Building Code. Guidelines on the Use of Rolled Lean-Mix Concrete in Road Pavements

VSN 56-97: Design and Basic Principles for Technology for Production of Fiber Reinforced Concrete Structures

VSP 02.01.32/Russian Defense Ministry: Rules for the production and acceptance of work in the construction of aerodromes of the Armed Forces of the Russian Federation

VSP 103-97: Steel Fiber Reinforced Concrete Enclosures for Secure Spaces in Russian Federation Central Bank Facilities. Execution, Quality Control, and Acceptance Requirements

VSP 32-02-03 MO RF: Rules for the production and acceptance of work in the repair of rigid airfield pavements

Customers Who Viewed This Item Also Viewed:

imgalt imgalt
Building materials. Methods for combustibility test
Language: English
Price: $162.00
imgalt
Cylindrical evolvent gears of external engagment. Strength calculation
Language: English
Price: $745.00
imgalt
Building materials spread flame test method
Language: English
Price: $147.00
imgalt
Food products, food raw materials. Method for determination of the non-steroidal anti-inflammatory drug residue content by high performance liquid chromatography – mass spectrometry
Language: English
Price: $349.00
imgalt
Steel welded vessels and apparatus. General technical conditions
Language: English
Price: $549.00
imgalt
Plywood for general use with outer layers of deciduous veneer. Specifications
Language: English
Price: $414.00
imgalt
System of Standards for Occupational Safety and Health (SSBT). Personal protective equipment for respiratory organs. Self-rescuers insulating on chemically bound or with compressed oxygen. Technical requirements. Test methods. Marking. Sampling rules
Language: English
Price: $700.00
imgalt

YOUR ORDERING MADE EASY!

RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.

Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.

We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.

Placing Your Order

Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).

Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.

For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.

For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.

Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.

Your Order Best Quality and Authenticity Guarantee

Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).

We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.

We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.

All Codes and Regulations

All Categories

Send us a message Expand Collapse

Leave your message in the form below, and we will write back by e-mail!