GOST 1497-84
ГОСТ 1497-84
|
|
Metals. Methods of tension test
Металлы Методы испытаний на растяжение
Status: Effective - Supersedes. The limitation of effectiveness has been lifted: Protocol No. 5-94 of the IGU dated 05.17.94 (IUS 11-12-1994)
The standard establishes methods for static tensile testing of ferrous and non-ferrous metals and products from them with a nominal diameter or the smallest size in the cross section of 3.0 mm or more to determine at a temperature of 20 (15
Стандарт устанавливает методы статических испытаний на растяжение черных и цветных металлов и изделий из них номинальным диаметром или наименьшим размером в поперечном сечении 3,0 мм и более для определения при температуре 20 (+15/-10) °С характеристик механических свойств: предела пропорциональности; модуля упругости; предела текучести физического; предела текучести условного; временного сопротивления; относительного равномерного удлинения; относительного удлинения после разрыва; относительного сужения поперечного сечения после разрыва. Стандарт не распространяется на испытания проволоки и труб.
Choose Language:
Format: Electronic (pdf/doc)
Approved: USSR State Committee for Standards,
7/16/1984
SKU: RUSS16654
The Product is Contained in the Following Classifiers:
Construction (Max) »
Standards »
Other state standards used in construction »
77 Metallurgy »
Evidence base (TR CU, Technical Regulation of the Customs Union) »
001/2011 TR TS. On safety of railway rolling stock »
Regulations and standards (to TR CU 001/2011) »
Evidence base (TR CU, Technical Regulation of the Customs Union) »
002/2011 TR TS. On safety of high-speed rail »
Regulations and standards (to TR CU 002/2011) »
Evidence base (TR CU, Technical Regulation of the Customs Union) »
003/2011 TR TS. On safety of railway infrastructure »
Regulations and standards (for TR CU 003/2011) »
Standards for pipe fittings (TPA) »
10. Production »
10.8 Material Testing »
Standards for pipe fittings (TPA) »
9. Materials for piping valves (TPA) »
9.1 Metals »
PromExpert »
SECTION I. TECHNICAL REGULATION »
V Testing and control »
2 Tests for external factors »
2.2 Testing of manufacturing products »
ISO classifier »
77 METALLURGY »
77.040 Metal Testing »
77.040.10 Mechanical testing of metals »
National standards »
77 METALLURGY »
77.040 Metal Testing »
77.040.10 Mechanical testing of metals »
National Standards for KGS (State Standards Classification) »
Latest edition »
V Metals and metal products »
V0 General rules and regulations on metallurgy »
V09 Test methods. Packaging. Marking »
National Standards for OKSTU »
FINISHED ROLLED STEELS (INCLUDING BILL FOR EXPORT) »
Control methods (testing, analysis, measurements) »
The Document is Replaced With:
GOST 1497-2023: Metals. Tensile test methods
As a Replacement Of:
GOST 1497-73: Metals. Tensile test methods
The Document References:
GOST 14766-69: Machines and apparatus for determination of mechanical properties of materials. Terms and definitions
GOST 1497-73: Metals. Tensile test methods
GOST 166-89: Vernier callipers. Specifications
GOST 28840-90: Machines for tension, compression and bending tests of materials
GOST 427-75: Measuring metal rules. Basic parameters and dimensions. Specifications
GOST 6507-90: Micrometers. Specifications
The Document is Referenced By:
DiOR 05: Methodology of diagnosing of technical condition and determining of residual life of process equipment of oil refineries and petrochemical plants
FTS ZhT TsT 020-99: Federal certification requirements for rail transport. Technical rules. Brake disks of railcar rolling stock. Certification requirements
FTS ZhT TsT 028-99: Brake block holders of the locomotives for main-line railways. Certification requirements
FTS ZhT TsT 085-2002: Locomotives and wagon rolling stock. Center wheel clean. Certification requirements
GOST 10006-80: Metal pipes
GOST 10025-2016: Tin-phosphor bronze rods. Specifications
GOST 10025-78: Tin-phosphor bronze rods. Specifications
GOST 10411-74: Axles for diesel locomotives of narrow gauge railways. Technical requirements
GOST 10446-80: Wire. Tensile test method
GOST 10494-80: Studs for flanged connections with lens-shaped seals for pn - 10-100 MPa (100-1000 kgf/sq sm). Technical requirements
GOST 10495-80: Hexagon nuts for flange joints for pn above 10 to 100 MPa (above 100 to 1000 kgf/cm2)
GOST 1050-2013: Metal products from nonalloyed structural quality and special steels. General specification
GOST 1050-88: Carbon structural quality steel gauged bars with special surface finish. General specifications
GOST 10702-2016: Rolled high-quality structural non-alloy and alloy steel for cold forging. General specifications
GOST 10702-78: Steel bars, carbon and alloy, structural, for cold extruding and upsetting. Specifications
GOST 10703-73: Aluminium sheets for graphic arts industry. Specifications
GOST 10791-2004: All-rolled wheels. Specifications
GOST 10791-2011: All-rolled wheels. Specifications
GOST 10791-89: Solid rolled wheels
GOST 10885-85: Hot-rolled two-ply corrosion-resistant steel sheets
GOST 11036-75: Electrotechnical quality unalloyed steel. Specifications
GOST 11150-84: Metals. Methods of tension tests at low temperatures
GOST 11268-76: Structural thin sheets of special purpose alloyed high quality steel
GOST 11269-76: Universal rolled plates and wide strips made of special purpose structural high-grade Alloy steel
GOST 11447-80: Locking studs for Py 10-100 MPa (100-1000 kgf/cm2). Technical requirements
GOST 11474-76: Bent-steel sections. Specifications
GOST 11530-2014: Rail joint bolts. Specifications
GOST 11530-93: Rail joint bolts. Specifications
GOST 11701-84: Metals. Methods of tensile testing of thin sheets and strips
GOST 11713-78: Tractor and combine diesels. Flywheels. General technical conditions
GOST 1173-2006: Copper foil, ribbons, sheets and plates. Specifications
GOST 12004-81: Reinforcing-bar steel. Tensile test methods
GOST 1215-79: Malleable iron castings
GOST 12247-80: Large seamless steel gas cylinders for operating pressure of 31,4 and 39,2 MPa (320 and 400 kgf/cm sq.). Specifications
GOST 13083-2016: Rods of nickel and nickel-silicon alloys. Specifications
GOST 13083-77: Rods of nickel and nickel-silicon alloys. Technical requirements
GOST 13726-78: Aluminium and aluminium alloys strips. Specifications
GOST 13726-97: Aluminium and aluminium alloys strips. Specifications
GOST 13843-2019: Aluminum wire rod. Technical conditions
GOST 13843-78: Rod aluminium wire. Technical conditions
GOST 13877-80: Sucker rods and couplings
GOST 13877-96: Sucker rods and sucker rod couplings. Specifications
GOST 14119-85: Rods from precision alloys for elastic elements
GOST 1414-75: Construction steel with enhanced and high machinability
GOST 1435-74: Non-alloyed tool steel. Specification
GOST 1435-90: Unalloyed tool steel bars, strips and coils
GOST 1435-99: Bars, strips and reels of tool unalloyed steel. General specifications
GOST 14637-79: Rolled thick-plate and wide-band universal of carbon steel for general use. Specification
GOST 14637-89: Thick sheet rolled stock of normal quality carbon steel
GOST 14838-78: Aluminum wite
GOST 14959-2016: Spring nonalloy and alloy steel product. Specifications
GOST 14959-79: Spring carbon and alloy steel bars. Specifications
GOST 1525-2015: Rods of monel. Specifications
GOST 1525-91: Rods of monel. Specifications
GOST 1535-2006: Copper rods. Specifications
GOST 1535-2016: Copper rods. Specifications
GOST 1535-91: Copper rods. Specifications
GOST 15598-70: Piano steel wire
GOST 1577-2022: Heavy-gauge plates and wide strips of structural quality steel. Technical specifications
GOST 1577-93: Plate and broadband roll stock of construction fine steel.
GOST 15835-2013: Beryllium bronze bars. Specifications
GOST 15835-70: Beryllium bronze bars. Specifications
GOST 1583-89: Aluminium casting alloys. Specifications
GOST 1583-93: Aluminium casting alloys. Specifications
GOST 1595-90: Aluminium-manganese bronze strips and ribbons. Specifications
GOST 16277-93: Plates of separate fastening for railway rails of types p50, p65 and p75
GOST 1628-2019: Bars are bronze. Technical conditions
GOST 1628-78: Bronze rods. Specifications
GOST 16442-80: Plastics insulated power cables. Specifications
GOST 16523-89: Rolled sheets from carbon quality and ordinary steel for general purposes
GOST 16523-97: Rolled sheets from quality and ordinary carbon steel for general purposes. Specifications
GOST 17019-78: Fixing parts for pipelines and cables. Specifications
GOST 17232-79: Aluminium and aluminium alloys plates. Technical conditions
GOST 17232-99: Aluminium and aluminium alloys plates. Specifications
GOST 17380-2001: Carbon and low-alloy steel butt-welding fittings. General specifications
GOST 17380-83: Seamless welded steel pipeline components for Pn £ 10 MPa (£ 100 kgf/cm2). Specifications
GOST 17431-72: Powder material. M-MP alloy Sheets. Specifications
GOST 17432-72: Powder material M-MP alloy Forgings and Rods. Specifications
GOST 17441-84: Electrical contact connections. Acceptance and methods of tests
GOST 1759.4-87: Bolts, screws and studs. Mechanical properties and test methods
GOST 1761-2016: Tin-phosphorus and tin-zinc bronze ribbons and strips. Specifications
GOST 1761-92: Tin-phosphorus and tin-zinc bronze ribbons and strips. Specifications
GOST 17711-93: Cast copper-zink alloys (brass). Grades
GOST 1789-2013: Beryllium bronze strips and tapes. Specifications
GOST 1789-70: Beryllium bronze strips and ribbons. Specifications
GOST 18227-85: Powder materials. Tensile test method
GOST 18227-98: Sintered metal materials (excluding hard metals). Tensile test pieces
GOST 18232-83: Guard rails. Specifications
GOST 18267-82: Railway rails, types р50, р65, and р75 for wide-gage railways, heat-treated by through hardening in oil
GOST 18351-73: Magnesium alloy extruded rods. Specifications
GOST 18907-73: Hard-worked heat-treated ground bars from high-alloy and corrosion-resistant steel
GOST 18968-73: Corrosion-resistant and high temperature steel rods and strips for steam turbine blades
GOST 19040-81: Metal tubes. Method of tension test at high temperatures
GOST 19281-2014: High strength rolled steel. General specification
GOST 19281-73: Low alloyed sorted and shaped steel
GOST 19281-89: Rolled steel with increased strength. General specifications
GOST 19282-73: Low-alloyed plate strip universal steel. Specifications
GOST 19442-74: Shaped bars for blades and bars for blade coupling of steam turbines made of corrosion-resistant and high-temperature steel
GOST 19657-84: Magnesium alloy pressed profiles. Specifications
GOST 20072-74: Heat-resistant steel
GOST 20295-85: Welded steel pipes for gas and oil pipelines. Technical specifications
GOST 2060-2006: Brass rods. Specifications
GOST 2060-73: Brass rods. Specifications
GOST 2060-90: Brass rods. Specifications
GOST 20700-75: Bolts, studs, nuts and washers for flanged and anchor connections, corks and yokes with medium temperature from 0 to 650 °C. Specifications
GOST 20967-2019: Rod made of aluminum alloys. Technical conditions
GOST 2105-75: Forged and swaged hooks. Technical requirements
GOST 2132-2015: Nickel anodes. Specifications
GOST 21357-87: Castings made of cold- and wear- resistant steel
GOST 21437-95: Zinc antifriction alloys. Marks, technical requirements and test methods
GOST 21488-76: Extruded bars of aluminium and aluminium alloys
GOST 21488-97: Pressed bars of aluminium and aluminium alloys. Specifications
GOST 21631-76: Sheets of aluminium and aluminium alloys. Specifications
GOST 21945-76: Seamless hot-rolled pipes from titanium-based alloys
GOST 21990-76: Magnesium and magnesium alloys plates. Specifications
GOST 2205-2016: L-90 tapes and strips for plating. Specifications
GOST 2205-71: L-90 tapes and strips for plating. Specifications
GOST 2208-2007: Brass foil, ribbons, strips, sheets and plates. Specifications
GOST 22178-76: Titanium and titanium alloys sheets. Specifications
GOST 22233-2001: Aluminium alloy extruded sections for translucent envelopes. General specifications
GOST 22233-2018: Aluminium alloy extruded sections for translucent envelopes. Specifications
GOST 22233-93: Extruded sections of aluminium alloys for enclosure building structures. General specifications
GOST 22253-76: Friction draft gears for 1520 mm gauge railway rolling stock. Specifications
GOST 22343-2014: Clamp of indirect rail fastening of railway. Specifications
GOST 22343-90: Clamp for indirect rail fastening of railways. Specifications
GOST 22356-77: High strength bolts and nuts аnd washes. General specifications
GOST 22635-77: Magnesium sheets. Technical requirements
GOST 22703-2012: Molded parts of coupler and automatic coupler devices of railway rolling stock. General specifications.
GOST 22703-91: Moulded pieces of automatic coupler equipment for 1520 mm gauge railway rolling stock. General specifications
GOST 22706-77: Metals. Method for tension tests at the temperature - 100 up to - 269 °C
GOST 22790-89: Assembly units and pipelines components, designed for рnom over 10 to 100 MPa (from 100 to 1000 kgf/cm2)
GOST 228-79: Anchor chains
GOST 23.218-84: Ensuring of wear resistance of products. Determination of energy-consumption while plastic deformation of materials
GOST 23304-78: Bolts, studs, nuts and washers for flanged connections for atomic power plants. Technical requirements. Acceptance. Test methods. Marking, packing, transportation and storage
GOST 23705-79: Hot-rolled and forged high-temperature alloy bars
GOST 23755-79: Plates of titanium and titanium alloys. Specifications
GOST 23786-79: Drill pipes made of aluminum alloys
GOST 23859.3-79: Bronze fire-resistance. Methods for the determination of chromium
GOST 23870-79: Weldability of steels. Test method for evaluation of fusion welding effect on parent metal
GOST 24182-80: Open-hearth steel rails, P75, P65 and P50 types for wide gauge railways. Specifications
GOST 24183-80: Power cable for stationary, installation. General technical requirements
GOST 24301-80: Bronze and brass cast bars and tubes. Technical conditions
GOST 24301-93: Bronze and brass cast bars and tubes. Specifications
GOST 24648-90: Pig iron for castings. Sampling and making the specimen for mechanical testing.
GOST 24982-81: Sheets of corrosion-resistant, heat-resistant and high-temperature alloys
GOST 25.502-79: Methods of mechanical testing of metals
GOST 25.503-80: Strength calculation and testing. Methods of mechanical testing of metals compression test method
GOST 25.503-97: Design calculation and strength testing. Methods of mechanical testing of metals. Method of compression testing
GOST 25.504-82: Strength calculation and testing. Methods of fatigue strength behaviour calculation
GOST 25.506-85: Design, calculation and strength testing. Methods of mechanical testing of metals. Determination of fracture toughness characteristics under the static loading
GOST 25001-81: Rolled-welded aluminium sheet billets for heat-exchangers. Specifications
GOST 25054-81: Forgings made of corrosion-resistant steels and alloys
GOST 25140-93: Zinc alloys for casting. Grades
GOST 25573-82: Freight handling rope slings for construction
GOST 26007-83: Strength calculations and tests. Methods of mechanical testing of metals
GOST 26131-84: Heat-resisting steel forgings. General specifications
GOST 26492-85: Titanium and titanium alloys rolled bars. Specifications
GOST 27208-87: Cast iron casting. Methods of mechanical testing
GOST 27266-87: Molybdenum wire for light sources
GOST 27772-2015: Structural steel structure rolled products. General specifications
GOST 27772-88: structural steel structure rolled products. General specifications
GOST 28378-89: Iron-based powder structural materials. Types
GOST 28394-89: Vermicular graphite iron for castings grades
GOST 2856-79: Casting magnesium alloys. Grades
GOST 28813-90: Plain bearings. Metallic multilayer materials for thin-walled plain bearings
GOST 28830-90: Soldered and brazed joints. Test methods for tension and long-term strength
GOST 28840-90: Machines for tension, compression and bending tests of materials
GOST 28870-90: Steel. Methods tensile tests of rolled thick-plates in the thickness direction
GOST 30136-95: Carbon steel rod of ordinary quality. Technical specifications
GOST 30245-2012: Steel bent closed welded square and rectangular section for building. Specifications
GOST 30272-96: Black collar axles (profile stock) for 1520 mm gauge railways. Specifications
GOST 30398-95: Dental explorers
GOST 30415-96: Steel. Non-destructive testing of mechanical properties and microstructure of steel products by magnetic method
GOST 30432-96: Metal tubes. Selection of samples, tube stocks and specimens for mechanic and technological tests
GOST 30565-98: Hot-rolled steel shapes for machine-Building in chemical engineering and oil industry. General specifications
GOST 30599-2017: Light alloy wheels for pneumatic tyres. Technical requirements and test methods
GOST 30599-97: Light alloy wheels for pneumatic tyres. Specifications
GOST 30768-2001: Control head oil field equipment. Test methods
GOST 30776-2002: Oil field mobile pumping units. General specifications
GOST 30803-2002: Transmission tooth gears of the traction main railway stock . Specifications
GOST 30803-2014: Transmission tooth gears of the traction railway stock. Specifications
GOST 31244-2004: Non-destructive testing. Evaluation of material physical and mechanical properties for technical system elements by acoustic method. General requirements
GOST 31334-2007: Axles for rolling stock of 1520 mm gauge railways. Specifications
GOST 31366-2008: Brass rods for free machining purposes. Specifications
GOST 31373-2008: Wheelsets of locomotives and motor-powered units. Strength calculations and tests
GOST 31385-2008: Vertical cylindrical steel tanks for oil and oil-products. General specifications
GOST 31385-2016: Vertical cylindrical steel tanks for oil and oil-products. General specifications
GOST 31443-2012: Steel pipes for crafts pipelines. Specifications
GOST 31447-2012: Steel weldes pipes for trunk gas pipelines, oil pipelines and oil products pipelines. Specifications
GOST 31569-2012: Corrosion-resistant (stainless) steel billets for cast dentures of orthopedic dentistry. General specifications
GOST 31570-2012: Nickel-base alloy billets for orthopedic dentistry. General specifications
GOST 31622-2012: Wrought stainless steel for surgical implants. Specifications
GOST 31623-2012: XK62M6L alloy cast rods for artificial joints. Specifications
GOST 31627-2012: Corrosion-resistant cobalt-base alloy billets for orthopedic stomatology. General specifications
GOST 31841-2012: Petroleum and natural gas industries. Well service equipment. General technical requirements
GOST 31844-2012: Petroleum and natural gas industries. Drilling and production equipment. Hoisting equipment. General technical equipments
GOST 31846-2012: Special Rolling Stock. Requirements for Bearing Structure Strength and for Dynamic Properties
GOST 31937-2011: Buildings and constructions. Rules of inspection and of the technical condition
GOST 31996-2012: Power cables with plastic insulation for rated voltages of 0,66; 1 and 3 kV. General specifications
GOST 32400-2013: Molded side frame and bolster beam of вogies for railway freight wagons. Specifications
GOST 3281-93: Axles for 1520 (1,524) mm gauge railway locomotives
GOST 32931-2015: Profile steel pipes for metal constructions. Specifications
GOST 33005-2014: Oil and gas industry. Drilling and production equipment. Connections of marine drilling risers. General specifications
GOST 33184-2014: Joint bars for rails of gauge railway. Specifications
GOST 33200-2014: Axles for wheelsets of railway rolling stock. General specifications
GOST 33722-2016: Switches of turnouts. General specifications
GOST 33724.1-2016: Pneumatic brake equipment of the railway rolling stock. Safety Requirements and Inspection Procedures. Part 1. Air distributors, brake valves, brake units, sealing rubber components
GOST 33752-2017: Steel welded cylinders for liquefied hydrocarbon gas, used as motor fuel on automotive vehicle. Specifications
GOST 33786-2016: Cylinder head gaskets and gas pipeline systems for internal combustion engines. General technical requirements
GOST 33796-2016: Railway multiple units. Durability and dynamics requirements
GOST 33852-2016: Pipeline valves. Knife gate valves for trunk pipelines. General specifications
GOST 34027-2016: Gas supply system. Gas main pipeline transportation. Mechanical safety. Assigning of safe operation life for linear part of gas main pipeline
GOST 34029-2016: Pipeline accessories. Check fittings for main oil pipelines and oil product pipelines. General specifications
GOST 34385-2018: Axle-boxes and adapters for wheelsets of freight wagon bogies. General specifications
GOST 34450-2018: Details and assembly units of coupling and automatic coupling devices of railway rolling stock. Test methods
GOST 34458-2018: Articulated connector devices with cast male and female parts for freight cars of articulated type. General technical specifications
GOST 34601-2019: Automobile vehicles powered by liquefied natural gas. Cryogenic power systems. Technical requirements and test methods
GOST 34636-2020: Pipe billet. General specifications
GOST 34939-2023: Locomotives. Requirements for strength and dynamic qualities
GOST 398-2010: Rough tyres for railway rolling stock. Specifications
GOST 398-81: Carbon steel tires for rolling stock for broad gauge railways. Technical requirements
GOST 398-96: Carbon steel tires for broad gauge railroads and subway rolling-stock
GOST 4008-89: Axles of full gauge railway cars. Specifications
GOST 4041-2017: Hot-rolled thick-rolled for cold stamping from non-alloyed constructional quality steel. Technical conditions
GOST 4041-71: Rolled plates of high quality structural steel for cold stamping
GOST 4121-76: Crane rails. Specifications
GOST 4121-96: Crane rails. Specifications
GOST 4133-73: Fishplates for wide gauge railway track
GOST 433-73: Rubber-insulated power cables. Specifications
GOST 434-78: Wire with rectangular cross-section and copper busbar wire for electrotechnical purposes
GOST 4442-2014: Bands and strips of lead brass. Specifications
GOST 4442-72: Strips and bands of lead brass. Specifications
GOST 4491-2016: Cast centers of wheels for railway rolling stock. General specifications
GOST 4491-86: Cast wheel centers for the 1520 mm-gauge railroad rolling stock
GOST 4543-2016: Metal products from structural alloy steel. Specification
GOST 4543-71: Structural alloyed steel
GOST 4728-2010: Axle billets for railway rolling stock. Specifications
GOST 4728-89: Shaft blanks for the rolling stock of the railroads with 1520 mm wide track
GOST 4728-96: Axle billets for the railway rolling stock of 1520 mm gauge
GOST 4748-92: Silicon-manganese bronze strips and ribbons. Specifications
GOST 4775-91: Bare, bimetallic, steel-copper wires
GOST 493-79: Tin-free foundry bronzes. Grades
GOST 495-77: Copper sheets and ribbons. Specifications
GOST 495-92: Copper sheets and ribbons. Specifications
GOST 503-81: Cold-rolled low-carbon steel strip. Specifications
GOST 5058-65: Low-alloy constructional steel. Grades and general technical requirements
GOST 5063-2016: Ribbons of cupro-nikel alloys. Specifications
GOST 5063-73: Ribbons of cupro-nickel alloys. Specifications
GOST 5257-89: Rough carbon steel tires for tramway rolling stock
GOST 5257-98: Rough carbon steel tyres for tramway rolling stock. Specifications
GOST 5267.0-90: Hot-rolled sections for car building. General specifications
GOST 535-2005: Common quality carbon steel bar and shaped sections. General specifications
GOST 535-88: Common quality carbon bar and shaped sections. General specifications
GOST 5362-2018: Brass ribbons. Specifications
GOST 5362-78: Brass ribbons. Specifications
GOST 5422-73: Hot-rolled special steel sections for tractors. Technical specifications
GOST 5520-2017: Rolled plate of unalloyed and alloyed steel for boilers and vessels working under pressure. Technical conditions
GOST 5520-79: Carbon, low-alloy and alloy sheet steel for boilers and pressure vessels. Specifications
GOST 5521-86: Weldable steel for shipbuilding
GOST 5521-93: Shipbuilding rolled steel
GOST 5582-75: Corrosion-resistant, heat-proof, and heat-resistant thin-sheet rolled stock
GOST 5876-82: Types P18 and P24 narrow-gauge railway rails
GOST 5949-2018: Stainless corrosion resisting, heat-resisting and creep resisting steel and alloy on iron-nickel-based products. Specifications
GOST 5949-75: Gauged corrosion-resistant, heat-resistant and high-temperature steel shape
GOST 613-79: Tin foundry bronzes. Grades
GOST 6235-2020: Nickel sheets and strips. Specifications
GOST 6235-91: Strips and ribbons of nickel. Specifications
GOST 6511-2014: Wrought tin-zinc bronze rods. Specifications
GOST 6511-60: Wrought stannic-zinc bronze rods. Specifications
GOST 6544-53: Grooved rails
GOST 6688-2016: Brass bars of rectangular section. Specifications
GOST 6688-91: Brass bars of rectangular section. Specifications
GOST 6690-83: Axes for metro carriages. Specifications
GOST 6713-75: Low-alloyed structural rolled stock for bridge building. Specifications
GOST 6713-91: Low-alloyed structural rolled stock for bridge building. Specifications
GOST 6856-54: Steel tubes
GOST 6996-66: Welded joints. Methods of mechanical properties determination
GOST 7293-85: Cast iron with globular graphite for foundry
GOST 7350-77: Plate, corrosion-resistant, heat-resistant, and high-temperature steel
GOST 7360-82: Subs for drilling strings
GOST 7370-2015: Railway frogs. Specifications
GOST 7370-86: Railway frogs of types R75, R65 and R50
GOST 7370-98: Railroad frogs of P75, P65 and P50 types. Specifications
GOST 7564-73: Steel. General rules of samples, blanks and test pieces for mechanical and technological tests
GOST 7564-97: Rolled products general rules of samples, rough specimens and test pieces selection for mechanical and technological testing
GOST 7769-82: Alloyed cast iron for castings with special properties
GOST 7918-75: Tool joints for 50 mm diameter drilling pipes. Specifications
GOST 8141-56: Fasteners for narrow gauge railways. Fishplates. General specifications
GOST 8142-89: Rail soles for R18, P24, P33 rail types
GOST 8319.0-75: Hot-rolled steel periodical lengthwise-rolled profiles. Specifications
GOST 8320.0-83: Periodic sections produced by helical rolling. General technical requirements
GOST 8479-70: Structural carbon and alloy steel forgings
GOST 8536-79: Blanks for marine shafts and rudder stocks. Specifications
GOST 8617-2018: Pressed sections of aluminium and aluminium alloys. Specifications
GOST 8617-81: Pressed sections out of aluminium and aluminium alloys. Specifications
GOST 9.901.4-89: Unified system of corrosion and ageing protection. Metals and alloys. Tests for corrosion cracking of specimens under uniaxial tension
GOST 9.908-85: Unified system of corrosion and ageing protection. Metals and alloys. Methods for determination of corrosion and corrosion resistance indices
GOST 9.909-86: Unified system of corrosion and ageing protection. Metals, alloys, metal and non-metal inorganic coatings. Test methods at climatic test stations
GOST 9.913-90: Unified system of corrosion and ageing protection. Aluminium, magnesium and alloys. Methods of accelerated corrosion test
GOST 931-90: Brass sheets and strips. Specifications
GOST 9399-81: Threaded steel flanges for Pn 20-100 MPa (200-1000 kgf/sq sm). Specifications.
GOST 9515-81: Piston metal rings for piston compressors. Specifications
GOST 9651-84: Metals. Methods of tension tests at elevated temperatures
GOST 9731-79: Large capacity seamless steel gas-cylinders for operation pressure 4.5 MPa (250 kgf / cm2)
GOST 977-88: Steel castings. General specifications
GOST 9960-85: Point blade rails
GOST ISO 11439-2014: Gas cylinders. High pressure cylinders for the on-board storage of natural gas as a fuel. Specifications
GOST ISO 3183-2012: Steel pipes for pipelines of petroleum and natural gas industries. General specifications
GOST ISO 3506-1-2014: Mechanical properties of fasteners made from corrosion-resistant stainless steel. Part 1. Bolts, screws and studs
GOST ISO 898-1-2014: Mechanical properties of fasteners made of carbon and alloyed steels. Part 1. Bolts, screws and studs with specified property classes with large and small thread pitch
GOST ISO 898-2-2015: Mechanical properties of fasteners made of carbon steel and alloy steel. Part 2. Nuts with specified property classes with coarse thread and fine pitch thread
GOST R 42.4.01-2014: Civil defence. Civil defence constructions. Test methods
GOST R 50.04.02-2018: Conformity assessment system for the use of nuclear energy. Conformity assessment in the form of testing. Qualification testing of heat treatment processes
GOST R 50.04.04-2018: Conformity assessment system for the use of nuclear energy. Conformity assessment in the form of testing. Qualification testing for technologies of working procedures by pressure
GOST R 50.04.06-2018: Conformity assessment system for the use of nuclear energy. Conformity assessment in the form of testing. Qualification testing for new material (base or welding)
GOST R 50.05.12-2018: Conformity assessment system in the field of atomic energy use. Conformity assessment in the form of control. Monitoring radiation embrittlement of the reactor vessel
GOST R 50.05.17-2019: Conformity assessment system in the field of atomic energy use. Steel castings for equipment and pipelines of nuclear power plants. Control procedure
GOST R 50253-92: Rail joint bolts. Specifications
GOST R 50426-92: Zinc alloys for casting. Grades
GOST R 50511-93: Light alloy wheels for pneumatic tyres. Specifications
GOST R 51045-2014: Rails of ways technological railways transport. General specifications
GOST R 51045-97: Steel rails of PП50, PП65 and PП75 types for industrial tracks. General specifications
GOST R 51161-2002: Sucker rods, mouth stocks and couplings for them. Specifications
GOST R 51161-98: Glass reinforced plastic sucker rods. Specifications
GOST R 51175-98: Transmission tooth gears of the traction main railway stock. Specifications
GOST R 51220-98: Transmission tooth gears of the traction main railway stock. Raw pieces. Technical specifications
GOST R 51245-99: Steel universal drill rods. General specifications
GOST R 51365-2009: Petroleum and natural gas industries. Drilling and production equipment. Wellhead and Christmas tree equipment. General specifications
GOST R 51365-99: Control head oil field equipment. General specifications
GOST R 51381-99: Corrosion-resistant cobalt-base alloy billets for orthopaedic stomatology. General specifications
GOST R 51394-99: Wrought stainless steel for surgical implants. Specifications
GOST R 51395-99: ХК62М6Л alloy cast rods for artificial joints. Specifications
GOST R 51682-2000: Casing and coring tubes for geology-exploring drilling. Specifications
GOST R 51685-2000: Railway rails. General specifications.
GOST R 51685-2013: Railway rails. General specifications.
GOST R 51767-2001: Nickel-base alloy billets for orthopaedic dentistry. General specifications
GOST R 52079-2003: Steel welded pipes for trunk gas pipelines, oil pipelines and oil products pipelines. Specifications
GOST R 52246-2004: Hot-dip zinc-coated steel sheet. Specifications
GOST R 52246-2016: Hot-dip zinc-coated steel sheet. Specifications
GOST R 52597-2006: Brass rods for free machining purposes. Specifications
GOST R 52627-2006: Bolts, screws and studs. Mechanical properties and test methods
GOST R 52643-2006: High-strength screws and nuts washers for metal structures. General specifications
GOST R 52664-2010: Welded pipe sheet piles. Specifications
GOST R 52910-2008: Vertical cylindrical steel tanks for oil and oil-products. General specifications
GOST R 52927-2008: Rolled stock of normal, increased- and high-strength steel for shipbuilding. Specifications
GOST R 52927-2015: Rolled of normal, increased - and high-strength steel for shipbuilding. Specifications
GOST R 52942-2008: Railway applications. Axles. Product requirements.
GOST R 53129-2008: Corrosion-resistant (stainless) steel billets for cast dentures of orthopaedic dentistry. General specifications
GOST R 53192-2008: Welded steel structures of freight cars. Technical requirements
GOST R 53337-2009: Special rolling stock. Requirements for bearing structure stength and for dynamic properties
GOST R 53499-2009: Tombac strips. Specifications
GOST R 53558-2009: Motor vehicles. Aluminium pistons of engines. General technical requirements and test methods
GOST R 53568-2009: Non-destructive testing. Evaluation of third order elasticity modulus by ultrasound. General requirements
GOST R 53580-2009: Steel pipes for crafts pipelines. Specifications
GOST R 53629-2009: Sheet piles of steel cold-formed sections. Specifications
GOST R 53664-2009: High-strength cheese-head and conical bolts for bridge building. Nuts and washers for them. Specifications
GOST R 53680-2009: Petroleum and natural gas industries. Well service equipment. General technical requirements
GOST R 53683-2009: Petroleum and natural gas industries. Drilling and production equipment. Hoisting equipment. General technical rudiments
GOST R 53769-2010: Рower cables with plastic insulation for rated voltages of 0,66; 1 and 3 kV. General specifications
GOST R 53778-2010: Buildings and constructions. Rules of inspection and monitoring of the technical condition. General requirements
GOST R 53803-2010: Copper rod for electrical purposes. Specifications
GOST R 53809-2010: Automobile engines. Cylinder liners. Technical requirements and test methods
GOST R 53845-2010: Steel rolled products. General rules of sampling, rough specimens and test pieces selection for mechanical and technological testing
GOST R 53866-2010: Crane rails. Specifications
GOST R 53932-2010: Tube billet. General specifications
GOST R 54152-2010: Tapes and strips from Л90 brass for plating. Specifications
GOST R 54157-2010: Profile steel pipes for metal constructions. Specifications
GOST R 54160-2010: Ribbons from cuprum-nickel, nickel silver and monel. Specifications
GOST R 54382-2011: Oil and gas industry. Submarine pipeline systems. General requirements
GOST R 54523-2011: Port hydraulic structures. Rules of inspection and monitoring of the technical condition
GOST R 54786-2011: Fastening parts for detachable connections of nuclear power plants. Specifications.
GOST R 54803-2011: High-pressure welded steel vessels. General technical requirements
GOST R 55025-2012: Power cables with plastic insulation for rated voltages from 6 up to and including 35 kV. General specifications
GOST R 55043-2012: Non-destructive testing. Evaluation of elastic-acoustic coefficients. General requirements
GOST R 55046-2012: Technical diagnostics. Evaluation of residual resource of long used steel pipelines on the basis of samples mechanical tests results. General requirements
GOST R 55171-2012: Stationary steam and hot-water boilers and heat recovery steam generators. Weld joints. Quality control. General requirements
GOST R 55185-2012: Parts and assembly units of coupler and automatic coupler devices of railway rolling stock. Test methods
GOST R 55374-2012: Alloyed structural rolled steel for bridge building. General specifications
GOST R 55429-2013: Hoop-in detachable joints of pipelines. Design, dimensions and general specifications
GOST R 55495-2013: Railway multiple units. Durability and dynamics requirements
GOST R 55497-2013: Check railway rails. Specifications
GOST R 55498-2013: Rolled wheel centres for railway rolling stock. Technical specifications
GOST R 55513-2013: Locomotives. Requirements for strength and dynamic properties
GOST R 55567-2013: The order of the organization and conducting technical engineering studies on researches on objects of cultural heritage. Monuments of history and culture. General requirements
GOST R 55599-2013: High pressure pipeline assembly units and components above 10 up to 100 MPa. General technical requirements
GOST R 55682.2-2013: Water-tube boilers and auxiliary installations. Part 2. Materials for pressure parts of boilers and accessories
GOST R 55682.2-2017: Water-tube boilers and auxiliary installations. Part 2. Materials for pressure parts of boilers and accessories
GOST R 55738-2013: Studs and ceramic ferrules for stud welding
GOST R 55820-2013: Switch and crossing rails. Specifications
GOST R 55941-2014: Grooved rails. Specifications
GOST R 56185-2014: Technical diagnostics. Evaluation of stresses in sides of pressure vessels by ultrasound. General requirements
GOST R 56232-2014: Determination of B«stress-strainB» diagram in the course of ball instrumental indentation. General requirements
GOST R 56282-2014: Aluminum alloy extruded large solid sections. Specifications
GOST R 56306-2014: Silver. Method of inductively coupled plasma atomic-emission analysis
GOST R 56354-2015: Cold formed sheet piling of non alloy steels. Specifications
GOST R 56403-2015: Trunk pipelines for oil and oil products transportation. Welded steel pipes. Specifications
GOST R 56467-2015: Space systems. Powder metal and metal composite materials. Classification. Nomenclature of indices
GOST R 56664-2015: Non-destructive testing. Evaluation of stress state material engineering products by acoustoelastic methods. General requirements
GOST R 56665-2015: Non-destructive testing. Ultrasonic method for determining the residual stresses in the railway wheel rims. General requirements
GOST R 56685-2015: Trunk pipelines for oil and oil products transportation. Fittings for diameters from 530 to 1220 mm. General specifications
GOST R 57173-2016: Calculation and strength testing. Methods of mechanical testing of metals. Test for stress relaxation of metals and alloys at a compression. General requirements
GOST R 57180-2016: Welding joints. Methods for determination of mechanical properties, macrostructure and microstructure
GOST R 57208-2016: Tunnels and subways. Rules of inspection and elimination of defects and damages under operation
GOST R 57223-2016: Technical diagnostics. Evaluation of steel pipelines condition under the parameters of the deformation relief in operation. General requirements
GOST R 57410-2017: Unified system of corrosion and ageing protection. Corrosion protection of wares from non-ferrous metal alloys by diffusion treatment with zinc. General requirements for flow process
GOST R 57411-2017: Unified system of corrosion and ageing protection. Corrosion protection of parts made of cast iron or steels by diffusion processing of zinc. General requirements to flow process
GOST R 57419-2017: Unified system of corrosion and ageing protection. Corrosion protection of parts made of super high and high-strength steels by diffusion treatment with zinc. General requirements for flow process
GOST R 57430-2017: Pipes, fitting from ductile iron with spherical graphite and their connections for trade oil pipelines. Specifications
GOST R 57556-2017: Materials for additive process. Control and tests methods
GOST R 57587-2017: Products obtained by additive processes. Methods of control and testing
GOST R 57837-2017: Hot-rolled steel I-beams with parallel edges of flanges. Specifications
GOST R 57899-2017: Anchors and strains for formworks. General specifications
GOST R 57910-2017: Materials for additive process. Control and tests methods
GOST R 58019-2017: Rod aluminium wire of 8176 and 8030 alloys. Specifications
GOST R 58064-2018: Steel welded pipes for building structure. Technical specifications
GOST R 58136-2018: Steel wire for mechanical springs. Cold-drawn, patented spring steel wire of unalloyed steel
GOST R 58177-2018: United power system and isolated power systems. Thermal power plants. Thermal-mechanical equipment of thermal power plants. Control of condition of metal. Norms and requirements
GOST R 58333-2018: Pressed finned panels made of aluminum alloys. Technical specifications
GOST R 58336-2018: Anchor angles. Test methods
GOST R 58374-2019: Laser hardening of mechanical engineering parts. Process Certification Requirements
GOST R 58385-2019: Cold-rolled steel profiles for construction. Technical specifications
GOST R 58389-2019: Bent steel sheet profiles with trapezoidal corrugations for steel-reinforced concrete structures. Technical specifications
GOST R 58419-2019: Additive technology. Products made of titanium alloys made by selective electron beam fusion. General specifications
GOST R 58599-2019: Technical diagnostics. Diagnostics of steel structures. Magnetic coercimetric method. General requirements
GOST R 58753-2019: Cargo rope slings for construction. Technical specifications
GOST R 58915-2020: Rolled plates of cryogenic steels. Specifications
GOST R 70369-2022: Calculations and strength tests. Determination of bending stresses in the linear part of trunk pipelines by acoustoelasticity method. General requirements
GOST R 70431-2022: Materials of equipment and pipelines of nuclear power installations. Methods for determination of impact toughness and critical brittle temperature from impact bending tests
GOST R 70520-2022: Reinforcement for reinforced concrete structures. Methods for determining the mechanical properties at high temperatures
GOST R 70731.3-2023: Steel pipes for manufacture of equipment and pipelines of nuclear power plants. General technical conditions. Part 3. Longitudinal welded steel pipes of unalloyed and alloyed steel
GOST R 70731.4-2023: Steel pipes for manufacture of equipment and pipelines of nuclear power plants. General technical conditions. Part 4. Longitudinal welded steel pipes made of 08Х18Н10Т austenitic class steel.
GOST R 8.932-2022: State System for Ensuring Uniformity of Measurements (GSI). Requirements to measurement procedures (methods) in the field of atomic energy use. General provisions
GOST R 9.316-2006: Unified system of corrosion and ageing protection. Thermodiffusion of zinc coatings. General requirements and control methods
GOST R 9.317-2010: Unified system of corrosion and ageing protection. Metallic coatings. Methods of measurement of ductility
GOST R 9.915-2010: Unified system of corrosion and ageing protection. Metals, alloys, coatings, products. Test methods of hydrogen embrittlement
GOST R ISO 10113-2014: Metallic materials. Sheet and strip. Determination of plastic strain ratio
GOST R ISO 11439-2010: Gas cylinders. High pressure cylinders for the on-board storage of natural gas as a fuel. Specifications
GOST R ISO 13628-2-2013: Petroleum and natural gas industries. Design and operation of subsea production systems. Part 2. Unbounded flexible pipe systems for subsea and marine applications
GOST R ISO 13680-2011: Seamless casing, tubing and coupling stock from corrosion-resistant high-alloy steels and alloys for petroleum and natural gas industries. Specifications
GOST R ISO 15841-2017: Dentistry. Wires for use in orthodontics
GOST R ISO 16047-2009: Fasteners. Torque/clamp force testing
GOST R ISO 17078-3-2013: Petroleum and natural gas industries. Drilling and production equipment. Part 3. Running tools, pulling tools and kick-over tools and latches for side-pocket mandrels. General technical requirements
GOST R ISO 22674-2013: Dentistry. Metallic materials for fixed and removable restorations and appliances
GOST R ISO 3183-1-2007: Steel pipes for pipelines. Specifications. Part 1. Requirements for class A pipes
GOST R ISO 3183-2009: Steel pipes for pipelines of petroleum and natural gas industries. General specifications
GOST R ISO 3183-2-2007: Steel pipes for pipelines. Specifications. Part 2. Requirements for class B pipes
GOST R ISO 3183-3-2007: Steel pipes for pipelines. Specifications. Part 3. Requirements for class C pipes
GOST R ISO 5832-1-2010: Implants for surgery. Metallic materials. Part 1. Wrought stainless steel
GOST R ISO 5832-4-2011: Implants for surgery. Metallic materials. Part 4. Cobalt-chromium-molybdenum casting alloy
GOST R ISO 5832-5-2010: Implants for surgery. Metallic materials. Part 5. Wrought cobalt-nickel-chromium-tungsten-nickel alloy
GOST R ISO 5832-6-2010: Implants for surgery. Metallic materials Part 6. Wrought cobalt-nickel-chromium-molybdenum alloy
GOST R ISO 5832-7-2009: Implants for surgery. Metallic materials. Part 7. Forgeable and cold-formed cobalt-chromium-nickel-molybdenum-iron alloy
GOST R ISO 5832-8-2010: Implants for surgery. Metallic materials. Part 8. Wrought cobalt-nickel-chromium-molybdenum-tungsten-iron alloy
GOST R ISO 5832-9-2009: Implants for surgery. Metallic materials. Part 9. Wrought high nitrogen stainless steel
GOST R ISO 5838-1-2011: Implants for surgery. Spokes, skeletal pins and wires. Part 1. Material and mechanical requirements
GOST R ISO 8535-1-2017: Diesel engines. Steel pipes for fuel lines high pressure. Part 1. Requirements for seamless cold-deformed pipes
GOST R ISO 8535-2-2017: Diesel engines. Steel tubes for high pressure fuel injection pipes. Part 2. Requirements for composite tubes
GOST R ISO 898-1-2011: Mechanical properties of fasteners made of carbon steel and alloy steel. Part 1. Bolts, screws and studs of specified property classes with coarse thread and fine pitch thread
GOST R ISO 898-2-2013: Mechanical properties of fasteners made of carbon steel and alloy steel. Part 2. Nuts with specified property classes with coarse thread and fine pitch thread
GOST R ISO 9329-4-2010: Seamless tubes from austenitic high-alloy steels for pressure purposes. Specifications
I 1.09-10: Instructions for connecting insulated conductors of wires and cables
I3-94: Instructions for diagnosing the technical condition of tanks of liquefied gas installations
Manual for SNiP II-23-81*: Steel Structural Engineering Tutorial
Manual for SNiP II-23-81*: Manual on the design of steel structures of overhead power lines (VL) power transmission towers and outdoor switchgears (outdoor switchgear) of substations with voltages above 1 kV
Manual for SNiP II-23-81*: Strength Design Guide for Steel Structures
Manual for SNiP III-18-75: A manual on quality control methods for welded joints of metal structures and pipelines performed in construction
MDS 11-17.2004: Rules for the inspection of buildings, structures and complexes for liturgical and auxiliary purposes
MDS 12-56.2010: Wire rope slings for construction. Recommendations for compilation of technical specifications
MDS 13-20.2004: Comprehensive methods for the inspection and energy audit of reconstructed buildings. Design Guide
MRDS 02-08: Manual on scientific and technical support and monitoring of buildings and structures under construction, including long-span, high-altitude and unique
MU 9001.00.001: Diagnostic technique for Romanian fountain fittings that have worked out their standard service life
NB ZhT TM 02-98: The safety standards for rail transport. Metal products for railway rolling stock. Standards of safety.
ODM 218.2.044-2014: Recommendations for the performance of instrument and instrumental measurements in assessing the technical condition of bridge structures on highways
ODM 218.4.002-2008: Guidelines for monitoring the status of existing bridge structures
OSN-APK 2.10.03.001-04: Designing the integrated protection of reinforced concrete structures of industrial agricultural buildings and structures from the effects of corrosive environments
OST 1 90113-86: Pressed sections of aluminium alloys. Specifications.
OST 1 92048-76: Large size Aluminium and Aluminium alloy extruded pipes.
OST 108.004.10-86: Quality control program of nuclear energetics products.
OST 108.020.03-82: Stamped billets of turbine and compressor blades made of corrosion-resistant and heat-resistant steel. General Specifications. (2010 edition, including 3 amendments)
OST 108.030.113-87: Carbon and alloy steel forgings for thermal and nuclear power stations equipment and pipelines. Technical specifications.
OST 108.030.124-85: Details and prefabricated units made of pearlitic steels for pipelines with environment pressure P>2.2 MPa (22 kg/cm2) in nuclear power plants. General Specifications.
OST 108.031.08-85: Stationary boilers and steam and hot-water pipelines. Strength calculation norms. General provisions on substantiation of wall thickness.
OST 108.109.01-92: Basic part billets made of corrosion-resistant steels of austenitic class. Technical conditions.
OST 108.958.04-85: General-purpose forgings for turbines and compressors. Specification.
OST 108.961.02-79: Carbon and alloy steel castings for components of stationary steam turbines with secured strength properties at high temperatures. Specifications.
OST 108.961.04-80: Castings of carbon and alloy steel, nickel-base alloys for components of stationary steam turbines and compressors. Specifications.
OST 153-39.4-010-2002: Method of determination of residual life of oil and gas pipelines and headwork pipelines.
OST 24.125.60-89: Details and prefabricated units of steam and hot water in thermal power plants. General Specifications.
OST 24.149.03-89: Cogwheels for traction rolling stock of mainline railways. Technical conditions.
OST 24.201.03-90: Steel high-pressure vessels and devices. General technical requirements.
OST 26-01-135-81: Vessels, devices and high-pressure pipeline parts forgings. General technical requirements, acceptance rules, Test methods.
OST 26-01-144-81: Studs, nuts, washers, threaded sockets, protective caps for vessels and apparatus for pressure over 9.81 up to 98.1 MPa (over 100 up to 1000 kgf/cm2). General technical requirements. Acceptance rules. Test methods. Marking.
OST 26-04-1222-75: Products of cryogenic engineering. General technical requirements and standards.
OST 26-07-1114-74: Aluminium-alloy castings for pipeline valves and its drive arrangements.
OST 26-2043-91: Bolts, studs, nuts and washers for flanged joints. Technical requirements
OST 3-1686-90: Billets made of structural steel for engineering. General Specifications.
OST 34-10-701-97: Parts of seamless steel welded pipelines on Rrab <2.2 MPa (22 kgf
OST 35-02-72: High-strength bolts, nuts and washers for them.
OST 35-22-83: Pipe culverts made of corrugated metal intended for railroad and auto road. Specifications.
OST 36-145-88: Steel technological pipelines for pressure Ру up to 10 MPa. Fluxing automatic arc welding. Typical technological process.
OST 36-26-77: Welded details of pipelines Dy 500-1400 mm made of carbon steel for Pnom <= 2.5 MPa (≈ 25 kg/cm2). General technical requirements.
OST 36-79-83: Steel process pipes of carbon and low alloy steels Pi up to 10 MPa (100 kgs/cm2). Semi-automatic welding with consumable electrode in carbon dioxide. Typical process.
OST 3-98-80: Constructional and spring refining steel. Technical requirements.
OST 95-10-72: Billets made of corrosion-resistant steels of 12Х13, 20Х13, 30Х13, 40Х13, 95Х18, 14Х17Н2, 07Х16Н4Б and 07Х16Н4Б-Ш types.
OST 95-29-72: Billets made of corrosion-resistant steels of 12Х18Н9Т, 12Х18Н10Т, 08Х18Н10Т, 10Х17Н13М2Т, 12Х18Н12Т and 03Х21Н32М3Б types.
P 69-97/VNIIG: Guidance on methods for assessing the life and safety of concrete and reinforced concrete structures of hydraulic structures
PB 03-164-97: Standards for Fabrication of Steam and Hot-Water Boilers, Pressure Vessels, and Steam and Hot Water Piping by Welding
PNAE G-7-025-90: Steel castings for nuclear plants. Rules of control
PNST 454-2020: Steel pipes for the manufacture of equipment and pipelines for nuclear power plants. General technical conditions. Part 3. Longitudinal welded steel pipes of unalloyed and alloyed steel
PNST 455-2020: Steel pipes for the manufacture of equipment and pipelines for nuclear power plants. General technical conditions. Part 4. Longitudinal welded steel pipes made of austenitic steel grade 08Х18Н10Т
PNST 594-2022: Oil and gas industry. Underwater production systems. Metallic materials
PNST 595-2022: Oil and gas industry. Underwater production systems. General characteristics and rules of application of structural steels for building structures
PNST 605-2022: Oil and gas industry. Underwater production systems. Teleoperated unmanned underwater vehicles tools and their interfaces
PNST 674-2022: Oil and gas industry. Underwater production systems. Chambers for launching and receiving means of cleaning and diagnostics of pipelines. General specifications
PNST 692-2022: Oil and gas industry. Underwater production systems. Wellhead equipment. Plugging module
R 50-54-30-87: Recommendations. Calculations and tests of strength. Test methods for contact fatigue
R 50-54-37-88: Recommendations. Calculations and tests of strength. Methods of mechanical testing of metals. Test method for corrosion cracking with a constant rate of deformation
RD 03-380-00: Guidelines for Inspection of Spherical Tanks and Gas Holders for Storage of Liquefied Gases Under Pressure
RD 03-410-01: Instructions on the procedure of comprehensive engineering certification of cryogenic tanks for liquefied gases
RD 03-421-01: Guidelines for the diagnosis of the technical condition and the determination of the residual service life of vessels and apparatus
RD 08-95-95: Provision on the system for technical diagnostics of welded vertical cylindrical oil and petroleum products tanks
RD 09-244-98: Instructions for diagnostics of technical condition of vessels, pipes and compressors, industrial ammonia refrigeration plants.
RD 10-112-3-97: Procedural Guidelines for Inspection of Hoisting Machinery with Expired Service Life. Part 3: Non-Self-Propelled Tower and Boom Cranes, and Derrick Cranes and Timber-Handling Cranes
RD 10-33-93: Slings for loading and general purposes. Requirements for arrangement and safe operation.
RD 10-96-95: Procedural Guidelines for Preparing Data Sheets (in Duplicate) for Steam and Hot Water Boilers
RD 153-112-017-97: Instructions for the diagnosis and assessment of residual life of vertical steel tanks
RD 153-34.1-17.424-2001: Procedural Guidelines for Investigation of Causes of Damage to Steam Turbine Rotor Components
RD 153-34.1-17.462-00: Procedural Guidelines Assessment of Serviceability of Steam Turbine Blades in the Process of Manufacturing, Operation, and Repair
RD 153-34.1-21.530-99: Procedural Guidelines for Inspection of Structural Elements of Process Buildings and Structures of Thermal Power Stations. Part 2: Metal Structures
RD 22-16-2005*: Guiding regulatory material. Hoisting machines. Selection of materials for the manufacture, repair and reconstruction of welded steel structures
RD 22-326-97: Self-propelled jib cranes and loader cranes. Overhaul. General technical conditions
RD 24.031.15-88: Methodological instructions. Designing stationary boilers steelworks.
RD 24.207.01-90: Piping fittings. Water-flap average life time dependence on specific pressure on the sealing surface
RD 24-SZK-01-01: Freight slings for general use on a textile basis. Requirements for the device and safe operation
RD 26.260.12-99: Service life extension of liquid carbon dioxide vessels. Instructional guidelines.
RD 26.260.16-2002: Expert technical diagnostics of vessels and equipment operating under pressure at gas and gas condensate and oil production and processing facilities in the northern regions of the Russian Federation and underground gas storage facilities
RD 26-11-08-86: Welded Joints. Mechanical Tests
RD 26-17-086-88: Weld joints. Quality control of heat treatment equipment
RD 2-97: Regulations on the system for the technical diagnosis of autoclaves in the production of building materials
RD 302-07-20-93: Determination of steel mechanical properties by means of indenter pressing-in method.
RD 31.1.02-04: Rules of technical operation of lifting and transport equipment of sea trading ports
RD 31.3.3-97: Guidelines on technical control of waterworks in maritime transport. Ministry of Transport, DMT Soyuzmorniiproekt, 1997
RD 31.35.11-89: Instructions for engineering surveys of seaport hydraulic structures
RD 31.44.01-97: Rules of technical operation of lifting and transport equipment of sea trading ports
RD 31.55.01.01-90: Spare parts for marine diesel engines of foreign construction. Steel piston heads. Technical requirements
RD 34 02.028-2007: Technical rules. Mechanical equipment and special steel structures for hydraulic structures. Manufacturing, installation and acceptance.
RD 34.17.425-86: Procedural Guidelines for X-Ray Detection of Macrodamage to Metal in Circulation Piping and Housing Equipment of Electric Power Generating Stations
RD 34.17.427-89: Procedural Guidelines. Nondestructive Testing at Thermal Power Stations. General Requirements
RD 34.17.428-90: Ordinance on Procedure for Prolonging the Service Life of High-Pressure Heaters and Low-Pressure Heaters Beyond 30 Years
RD 34.17.435-95: Methodological instructions. Technical diagnostics of boilers with working pressure up to 4.0 MPa inclusive.
RD 34.17.440-96: Procedural Guidelines for Assessment of Individual Service Life of Steam Turbines and Prolongation of Their Operational Life Beyond the Individual Service Life of Steam Turbines and Prolonging Their Operational Life Beyond The Equipment Service Life
RD 34.21.623-96: Procedural Guidelines for Inspection of Metal Structures of Fuel Supply Trestles
RD 34.40.601-97: Procedural Guidelines for Inspection of Hot Water Storage Tanks
RD 39-00147105-001-91: Method for evaluating the performance of pipes in the linear part of the pipeline based on diagnostic information
RD 39-0147103-361-86: Method for choosing pipe parameters and calibration calculation of the linear part of trunk pipelines for low-cycle strength
RD 50-460-84: Guidelines. Ensuring the durability of products. Method for experimental evaluation of plasticity of the surface layers of machine parts
RD EO 0007-93: Standard instruction manual for operation of industrial buildings and structures of nuclear power plants. Part 1. Organization of operation, repairs and maintenance. Volume 1, 2
RD EO 0027-2005: Instructions for determining the mechanical properties of metal of equipment of nuclear power plants using gumless methods according to hardness characteristics
RD NIIKranostroeniya 03-05: Guidelines. Jib cranes for general use and cranes; Overhaul. General specifications
RD RosJeK 05-014-98: Guidelines for expert examination of pipelines of steam and hot water of category IV, supervised by the Gosgortekhnadzor of Russia
RD RTM 38.14.006-86: Method for determining the service life of the coils of catalytic reforming furnaces that have worked out the project resource
Recommendations: Aspiration smoke-sensitive alarms VESDA. Part 1. Scope
RMD 40-20-2013 Sankt-Peterburg: Designing and installation pipelines for water supply and sewage systems in Saint-Petersburg
RMD 40-20-2016 Sankt-Peterburg: Installation of water supply and drainage networks in St. Petersburg
RTM 393-94: Technical Guides for welding and quality control of the joints of reinforcement and embedded items of concrete elements
Safety Guide: Recommendations on arrangement and safe operation of process pipelines
Safety Guide: Recommendations on technical diagnostics of welded vertical cylindrical tanks for oil and petroleum products
SDA 24-2008: Rules for assessment (certification) of testing laboratories personnel
SDOS-04-2009: Construction control. Methodology for conducting construction control during construction, reconstruction, overhaul of capital construction facilities
SNiP 3.06.07-86: Bridges and Pipes. Rules for Inspection and Testing
SP 101-34-96: Set of rules for construction of trunk pipelines (SPSMG). Code of practice for selection of pipes for the construction of trunk gas pipelines. RAO "Gazprom", 11/15/90
SP 13-102-2003: Rules of inspection of bearing structures of buildings and facilities
SP 16.13330.2011: Steel structures
SP 294.1325800.2017: The construction of steel. Design rules
SP 329.1325800.2017: Buildings and structures. Rules of inspection after the fire
SP 34-101-98: Selection of pipes for main oil pipelines during construction and repair
SP 394.1325800.2018: Buildings and complexes are high-rise. Terms of Use
SP 40-109-2006: Code of practice for design and installation of water and sewer systems with pipes made of high-strength ductile iron and nodular graphite
SP 53-102-2004: General rules for steel structure design
ST CKBA 125-2020: Pipe fittings. Types of control and testing
ST RK 1667-2007: Materials of construction for the body of passenger cars and multiple units. Technical requirements and testing methods
ST RK 2432-2013: Railway rails differentially strengthened and not-heat-strengthened. General specification
ST SSFZhT TsT 042-99: Certification system standard for the federal rail transport. Brake discs of engine carrying equipment applied for railways. Standard testing procedure.
ST SSFZhT TsT 052-99: Shoes and brake pads for locomotives running on main railways. Standard testing method.
ST SSFZhT TsT-121-2001: Cylindrical cogged wheels of traction gearing of traction rolling stock of main railway lines. Standard testing method
ST TsKBA 007-2004: Pipe fittings. Organizing and conducting an industrial safety review of pipeline valves operated at hazardous production facilities
ST TsKBA 007-2015: Pipe fittings. Organizing and conducting an industrial safety review of pipeline valves operated at hazardous production facilities
ST TsKBA 010-2004: Pipe fittings. Forgings, stampings and rolled products. Technical requirements
ST TsKBA 012-2005: Pipe fittings. Studs, bolts, nuts and washers for pipe fittings. Technical requirements
ST TsKBA 014-2004: Pipe fittings. Steel castings. General technical conditions
ST TsKBA 015-2005: Pipe fittings. The program of quality control of fittings of nuclear power plants
ST TsKBA 050-2008: Pipe fittings. Castings from cast iron. Technical requirements
ST TsKBA 051-2008: Pipe fittings. Castings from non-ferrous alloys. Technical requirements
ST TsKBA 088-2010: Pipe fittings. The quality control program of valves used for hydrogen sulfide environments
ST TsKBA 091-2011: Pipe fittings. Determination of mechanical properties of steel based on hardness measurement
STO: Thermal power plants. Methods of assessing the condition of the main equipment
TSN 13-311-01: Inspection and assessment of the technical condition of buildings and structures
TU 102-488.1-05: Connecting details and nodes of main pipelines on Рр up to 10 MPa (100 kgf
TU 102-488-95: Connecting parts and nodes of trunk pipelines on RR up to 10 MPa (100 kgf / cm2)
TU 108.11.853-87: Procurement of parts from purchased long products
TU 13.03-011-00212179-2003: Spiral-welded electric-welded pipes made of carbon steel 20 for pipelines of nuclear power plants. Technical conditions
TU 1317-006.1-593377520-2003: Steel seamless oil and gas pipelines of increased operational reliability for the field construction of TNK OJSC
TU 1381-003-47966425-2006: Steel electric-welded steel pipes with an outer diameter of 610 - 1420 mm for gas pipelines for operating pressures up to 9.8 MPa
TU 14-158-116-99: Steel electric-welded longitudinal pipes of increased corrosion resistance and cold resistance for gas and oil pipelines
TU 14-2-767-88: Hot-rolled steel strip with improved quality. Technical conditions
TU 14-3-1573-96: Steel electric welded longitudinal pipes with a diameter of 530-1020 mm with a wall thickness of up to 32 mm for main gas pipelines, oil pipelines and oil product pipelines
TU 14-3-1698-2000: Steel electric-welded longitudinal pipes with a diameter of 1020, 1220 mm for gas and oil pipelines
TU 14-3-377-99: Steel welded longitudinal welded pipes for main gas and oil pipelines
TU 14-3-808-78: Spiral-welded electrowelded carbon steel pipes 20 for pipelines of nuclear power plants
TU 14-3R-110-2009: Thick-walled hot-deformed pipes made of corrosion-resistant steel. Technical conditions
TU 14-3R-1128-2007: Seamless cold-resistant steel pipes for gas pipelines of gas-lift systems for oil production and gas field equipment. Technical conditions
TU 14-3R-115-2010: Centrifugally cast pipes for the chemical and petrochemical industries. Technical conditions
TU 14-3R-1471-2002: Northern-straight-seam electric-welded pipes for arranging oil and gas fields, main gas pipelines, oil and oil product pipelines of field pipelines. Technical specifications
TU 14-4-87-72: High-strength thermally treated bolts and nuts with a diameter of M16 - M27 for building steel structures. Technical conditions
TU 1461-037-50254094-2004: High-strength cast iron pressure pipes. Technical conditions
TU 1461-062-50254094-2003: High-strength cast iron pressure pipes for the electrochemical protection of underground metal structures. Technical conditions
TU 1461-064-50254094-2003: High-strength cast iron pipes for storm sewer free-flow systems
TU 1468-001-17192736-01: Seamless welded bends made of alloy and high alloy steel
TU 1468-010-593377520-2003: Seamless steel welded joints for pipelines, of increased operational reliability, intended for the field construction of OAO TNK
TU 1469-006-00153229-2001: Parts connecting on Рр up to 16 MPa (160 kgf
TU 1-92-156-90: Forgings and forgings of carbon and alloy structural steel. Technical conditions
TU 26-18-38-90: Parts of seamless welded pipelines from steel grades 15Х5М, 12Х1МФ, 12Х18Н10Т, 08Х22Н6Т
TU 36-1686-82: Bends are steeply curved with an angle of 90 degrees from steel grades 15X5M, 08X18NIOT, 12X18NIOT and 10X17H13M2T seamless welded on the Rou is less than 10 MPa
TU 5851-008-01388383-2002: Reinforced concrete beams with frame fittings for the superstructure of road bridges and overpasses with a length of 12, 15 and 18 m. Specifications
TU 95.349-2000: Longitudinal electric-welded pipes from steel grades 08X18H10T, 12X18H10T for atomic electric and thermal stations. Technical specifications
VSN 136-78/Mintransstroj: Instructions for the design of auxiliary structures and devices for the construction of bridges
VSN 362-87: Disinfections and Etching of Pipelines
Customers Who Viewed This Item Also Viewed:
|
Liquid lubricating and plastic materials. Method of test for lubricating properties on four ball machine
Language: English |
Rules of development, coordination, approval and composition of technical and economic assessment for construction
Language: English |
United power system and isolated power systems. Operative-dispatch management. Frequency control and control of active power. Norms and requirements
Language: English |
Armour clothes. Classification and general technical requirements
Language: English |
Food products. Methods for detection and quantity determination of coliformes
Language: English |
Hotels design
Language: English |
Railroad rails. General specifications
Language: English |
|
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.