RD RTM 38.14.006-86

РД РТМ 38.14.006-86

Method for determining the service life of the coils of catalytic reforming furnaces that have worked out the project resource

Методика определения сроков эксплуатации змеевиков печей установок каталитического риформинга, отработавших проектный ресурс

Status: Effective

The technical guidance applies to the coils of catalytic reforming and preliminary hydrotreatment units for gasoline, which have worked the estimated service life determined by the project. RTM determines the methodology, scope and frequency of examination of furnace coils, studies of the physicomechanical properties of the metal of their elements, the procedure for drawing up a decision on the possibility of their further operation.

Руководящий технический материал распространяется на змеевики печей установок каталитического риформинга и предварительной гидроочистки бензина, проработавших расчетный срок службы, определенный проектом. РТМ определяет методику, объем и периодичность обследования змеевиков печей, исследований физико-механических свойств металла их элементов, порядок оформления решения о возможности их дальнейшей эксплуатации.

Choose Language: 
Format: Electronic (pdf/doc)

Approved: USSR Ministry of Oil Refining and Petrochemical Industry, 7/7/1986

SKU: RUSS166573


Price: request_a_quote

The Product is Contained in the Following Classifiers:

Welding regulations » Main materials »

Welding regulations » Pipelines »

Welding regulations » Welding materials »

Welding regulations » Documentation »

Welding regulations » Non-destructive control »

Welding regulations » Mechanical Testing »

Welding regulations » Heat treatment »

Welding regulations » Defects »

Welding regulations » Main materials » Steel, cast iron »

Welding regulations » Welding materials » Electrodes »

Welding regulations » Welding materials » Wire »

PromExpert » SECTION I. TECHNICAL REGULATION » V Testing and control » 4 Testing and control of products » 4.13 Testing and control of products of engineering industry » 4.13.1 Machinery, equipment and components for general engineering applications » 4.13.1.4 Thermal and electrothermal equipment »

ISO classifier » 75 EXTRACTION AND PROCESSING OF OIL, GAS AND RELATED PRODUCTION » 75.180 Equipment for oil and gas industry » 75.180.20 Equipment for oil and gas processing »


The Document References:

GOST 10006-80: Metal pipes

GOST 10145-81: Metals. Stress-rupture test method

GOST 11534-75: Hand arc welding. Acute and blunt weld joints. Main types, design elements and dimensions

GOST 12344-88: Alloyed and high-alloyed steels. Methods of carbon determination

GOST 12345-88: Alloyed and high-alloyed steels. Methods of sulphur determination

GOST 12347-77: Alloyed and high-alloyed steels. Methods for determination of phosphorus

GOST 12348-78: Alloyed and high-alloyed steels. Methods of manganese determination

GOST 12349-83: Alloyed and high-alloyed steels. Methods for determination of tungsten

GOST 12350-78: Alloyed and high-alloyed steels. Methods of chromium determination

GOST 12351-81: Steels alloyed and highalloyed. Methods for the determination of vanadium

GOST 12352-81: Steels alloyed and highalloyed. Methods for the determination of nickel

GOST 12353-78: Alloyed and high-alloyed steels. Methods of cobalt determination

GOST 12354-81: Steels alloyed and highalloyed. Methods for the determination of molybdenum

GOST 12355-78: Alloyed and high-alloyed steels. Methods of copper determination

GOST 12356-81: Steels alloyed and highalloyed. Methods of the determination of titanium

GOST 12357-84: Steels alloyed and highalloyed. Methods for the, determination of aluminium

GOST 12358-82: Steels alloyed and highalloyed. Methods for the determination of arsinic

GOST 12359-81: Steels carbon, alloyed and highalloyed. Methods for the determination of nitrogen

GOST 12360-82: Steels alloyed and highalloyed. Methods for the determination of boron

GOST 12361-82: Alloyed and high-alloyed steels. Methods for determination of niobium

GOST 12362-79: Alloy and high-alloy steels. Methods for determination of stibium, lead, tin, zinc and cadmium

GOST 12363-79: Steels alloyed and highalloyed. Methods for the determination of selenium

GOST 12364-84: Steels alloyed and highalloyed. Methods for the determination of cetium

GOST 12365-84: Steels alloyed and highalloyed. Methods for the determination of zirconium

GOST 14019-80: Metals. Methods of bend tests

GOST 14249-89: Vessels and apparatus. Norms and methods of strength calculation

GOST 1497-84: Metals. Methods of tension test

GOST 17374-83: Seamless welded steel pipeline components for Pn £ 10 MPa (£ 100 kgf/cm2). Types and main parameters

GOST 17375-83: Seamless welded steel pipeline components for Pn £ 10 MPa (£ 100 kgf/cm2). Sharply curved offsets. Design

GOST 17376-83: Seamless welded steel pipeline components for Pn £ 10 MPa (£ 100 kgf/cm2). Tees. Design and dimensions

GOST 17380-83: Seamless welded steel pipeline components for Pn £ 10 MPa (£ 100 kgf/cm2). Specifications

GOST 1763-68: Steel. Methods for determination of decarbonised layer depth

GOST 1778-70: Steel. Metallographic methods for the determination of non-metallic inclusions

GOST 20072-74: Heat-resistant steel

GOST 3242-79: Welded joints

GOST 356-80: Valves and details for piping. Pressures conditional, test and operational. Lines.

GOST 3845-75: Metallic tubes. Hydraulic pressure testing method

GOST 4543-71: Structural alloyed steel

GOST 550-75: Seamless steel tubes for petroleum processing and petrochemical industry. Specifications

GOST 5632-72: High-alloy steels and corrosion-proof, heat-resisting and heat treated alloys. Grades

GOST 5639-82: Steel and alloys. Methods for detection and determination of grain size

GOST 6996-66: Welded joints. Methods of mechanical properties determination

GOST 7512-82: Nondestructive testing. Welded joints. Radiography method

GOST 7565-81: Iron, steel and alloys. Sampling for determination of chemical composition

GOST 8233-56: Steel. Microstructure standards

GOST 8695-75: Tubing (pipes). Flattening testing method

GOST 9012-59: Metals. Method of Brinell hardness measurement

GOST 9013-59: Metals. Method of measuring Rockwell hardness

GOST 9450-76: Measurements microhardness by diamond instruments indentation

GOST 9454-78: Metals. Method for testing the impact strength at the low, room and high temperature

GOST 9940-81: Seamless hot-deformed tubes made from corrosion-resistant steel

GOST 9941-81: Seamless cold- and warm-deformed tubes made from corrosion-resistant steel

OST 26-02-706-72: Allowable stresses in the calculation of vessels and equipment, which are used for processing, storage and transport of explosive and flammable products and highly potent substances (SDYaV)

OST 26-1379-76: Seams of welded connections. Metallographic method of control of base metal and welded joints

RTM 26-02-67-84: Method of strength design of furnace elements working under pressure

GOST 12346-78: Alloyed and high-alloyed steels. Methods of silicon determination

Customers Who Viewed This Item Also Viewed:

Rules of Electrical Installations Design (Russian Electrical Code). 7th Edition. All sections and exhibits
Language: English
Price: $478.76
Foundation bolts. Structure and dimensions
Language: English
Price: $198.99
Hot-rolled sheet. Range
Language: English
Price: $72.27
Pipeline valves. Leakage rates of valves
Language: English
Price: $173.25
Flanges for valves, fittings and pipelines for pressure to PN 250. Design, dimensions and general technical requirements
Language: English
Price: $293.04
Stainless steels and corrosion resisting, heat-resisting and creep resisting alloys. Grades
Language: English
Price: $212.85
Electromagnetic compatibility of multimedia equipment. Emission requirements
Language: English
Price: $974.64
Non-destructive testing. Method of magnetic particle testing. Standard technological processes
Language: English
Price: $292.05
Supports for Cylindrical and Conical Upright Apparatus. Types and Basic Parameters
Language: English
Price: $573.20
Rolling stock of railways. Springs cylindrical screw. Certification requirements
Language: English
Price: $175.65
Steel structures
Language: English
Price: $297.00
Metal products from structural alloy steel. Specification
Language: English
Price: $371.25
Obosnovanie bezopasnosti oborudovaniya. Rekomendatsii po podgotovke
Language: English
Price: $67.32
Reinforcing rolled products for reinforced concrete constructions. Specifications
Language: English
Price: $298.98
Steel welded vessels and apparatus. General technical conditions
Language: English
Price: $108.90
State system for ensuring the uniformity of measurements. Verification of testing equipment. General principles
Language: English
Price: $121.77
Steel building structures. General specifications
Language: English
Price: $250.17
Fencing constructions for translucent buildings and structures. Design rules
Language: English
Price: $609.15
Tests on electric and optical cables under fire conditions. Part 3-22. Flame spread of vertically-mounted bunched wires or cables. Category A
Language: English
Price: $102.96
Hexagon head bolts. Product grades A and B
Language: English
Price: $203.94

YOUR ORDERING MADE EASY!

RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.

Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.

We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.

Placing Your Order

Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).

Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.

For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.

For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.

Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.

Your Order Best Quality and Authenticity Guarantee

Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).

We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.

We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.

All Codes and Regulations

All Categories

Send us a message Expand Collapse

Leave your message in the form below, and we will write back by e-mail!