RD EO 1.1.2.09.0772-2008
РД ЭО 1.1.2.09.0772-2008
|
|
Methods of assessing the technical condition and resource characteristics of systems and means of fire protection of nuclear power units
Методика оценки технического состояния и ресурсных характеристик систем и средств противопожарной защиты энергоблоков атомных станций
Status: Not effective - No longer valid. Order of Rosenergoatom No. 9
The method establishes the composition, content and sequence of work to extend the life of the elements of the systems and means of fire protection (hereinafter referred to as the SPS PPZ) of NPP units and extends to: external and internal fire water supply systems; fire extinguishing installations (gas, water, powder, gas and aerosol, foam); fire warning systems; fire alarm systems; fire retardant cable coatings; construction of filling openings (cable penetrations); fire barrier belts; hermetic cable glands; smoke protection systems (air overpressure, smoke removal); stationary rescue devices (fire escapes); fire doors.
Методика устанавливает состав, содержание и последовательность проведения работ по продлению срока службы элементов систем и средств противопожарной защиты (далее СиС ППЗ) энергоблоков АЭС и распространяется на: системы наружного и внутреннего противопожарного водопровода; установки пожаротушения (газовые, водяные, порошковые, газоаэрозольные, пенные); системы оповещения о пожаре; системы пожарной сигнализации; огнезащитные покрытия кабелей; конструкции заполнения проемов (кабельные проходки); огнепреградительные пояса; герметичные к��бельные вводы; системы противодымной защиты (подпора воздуха, дымоудаления); стационарные спасательные устройства (пожарные лестницы); двери противопожарные.
Choose Language:
Format: Electronic (pdf/doc)
Approved: Energoatom Concern OJSC,
2/5/2009
SKU: RUSS166645
The Product is Contained in the Following Classifiers:
Construction (Max) »
Regulations »
Regulatory documents of supervisory authorities »
Normative documents of Gosatomnadzor of Russia »
PromExpert »
SECTION IV. INDUSTRIAL SAFETY »
III Nuclear and radiation safety »
3 Atomic stations »
The Document is Replaced With:
RD EO 1.1.2.09.0772-2012: Methods of assessing the technical condition and resource characteristics of systems and fire protection ?a nuclear power plants
The Document References:
GOST 5264-80: Manual arc welding. Welding joints. Main types, design elements and dimensions
GOST 12.1.004-91: Fire safety. General requirements
GOST 12.1.033-81: Occupational safety standards system. Fire safety. Terms and definitions.
GOST 12.3.018-79: Occupational safety standards system. Ventilation system. Aerodynamical test methods
GOST 13717-84: Pressure-operated indicating electrical-contact instruments
GOST 15140-78: Paintwork materials. Methods for determination of adhesion
GOST 18322-78: Equipment maintenance and repair system. Terms and definitions
GOST 2.114-95: Unified system for design documentation. Specifications
GOST 2.601-95: Operational documents
GOST 20911-89: Technical diagnostics. Terms and definitions
GOST 25772-83: Steel guard railing of stairways, balconies and roofs. General specifications
GOST 26952-86: Fire-extinguishing powders
GOST 27.002-89: Industrial product dependability. General principles. Terms and definitions
GOST 27.410-87: Industrial product dependability. Inspection methods of reliability indices and plans of check tests on reliability
GOST 27893-88: Telephone cables. Methods of tests
GOST 30247.2-97: Elements of building constructions fire resistance test method doors and gates
GOST 4.107-83: System of product quality indices. Fire-extinguishing powders. Nomenclature of indices
GOST 8220-85: Underground fire hydrants. Specifications
GOST 9.032-74: Unified, system of corrosion and ageing protection. Paint coatings. Groups, technical requirements and designations
GOST 9.302-88: Unified system of corrosion and ageing protection. Metal and non-metal inorganic coatings. Control methods
GOST 9923-80: Manual fire barrel. Specifications
GOST R 50409-92: Medium expansions foam-making branch pipes. Specifications
GOST R 50588-93: Foaming agents for fire extinguishing. General technical requirements and test methods
GOST R 50680-94: Automatic water fire fighting systems. General technical requirements. Test methods.
GOST R 50800-95: Automatic fire fighting foam systems General technical requirements Test methods
GOST R 50898-96: Fire detectors. Fire sensitivity test
GOST R 50969-96: Automatic gas fire extinguishing systems. General technical requirements. Test methods
GOST R 51043-2002: Аutomatic water and foam fire fighting systems. Sprinklers, spray nozzles and water mist nozzles. General technical requirements. Test methods
GOST R 51052-2002: Аutomatic water and foam fire extinguishing installations. Wet and dry systems alarm stations. General technical requirements. Test methods
GOST R 51089-97: Control, indicating receiving and operating equipment. General technical requirements. Test methods
GOST R 51091-97: Automatic dry chemical fire fighting systems. Types and basic parameters
GOST R 51115-97: Fire equipment. Fire turntable combined monitors. General technical requirements. Test methods
NPB 151-2000: Fire-fighting cabinet. Technical requirements of fire safety. Test methods
NPB 152-2000: Fire equipment. fire hose. Technical requirements of fire safety. Test methods
NPB 153-2000*: Fire fighting equipment. Fireheads connecting. Technical requirements for fire safety. Test methods
NPB 154-2000: Fire machinery. Fire hydrants valves. Specifications for fire safety. Test methods.
NPB 159-97*: Fire fighting equipment. Fire monitors combined. General technical requirements. Test methods
NPB 236-97: Fire retardant compositions for steel constructions. General requirement. Method for determining fire retardant efficiency
NPB 237-97: Building constructions methods of fire-resistance testing of cable penetrations and enclosed cable inputs. Building construction. Methods of fire-resistance testing of cable penetrations and enclosed cable inputs
NPB 238-97: Fire retardant cables coatings. General technical requirements and test methods
NPB 240-97: The smoke control systems of buildings. Methods of acceptance and routine tests
NPB 241-97: Fire dampers of ventilation systems. The test method for the fire resistance
NPB 245-2001: Fixed fire ladders to be installed outside buildings. Buildings roof railings. General technical requirements. Test methods
NPB 304-2001: Foam fire extinguishing concentrates. General technical requirements and test methods
NPB 54-2001: Automatic gas fire extinguishing systems. Cylinders and cylinder banks. General technical requirements. Test methods
NPB 58-97: Address fire alarm systems. General technical requirements. Test methods
NPB 60-97: Fire engineering. Generators of extinguishing aerosol. General technical requirements. Test methods
NPB 63-97: Automatic foam fire extinguishing installations feeders. general technical requirements. test methods
NPB 67-98: Automatic dry chemical fire fighting systems. Module. General technical requirements and test methods
NPB 75-98: Control, indicating, receiving and operating equipment. General technical requirements. Test methods
NPB 76-98: Fire detectors. General technical requirements. Test methods
NPB 77-98: Fire alarm systems and evacuation management. General technical requirements and test methods
NPB 88-2001*: Fire extinguishing and alarm systems. Norms and design rules
PB 03-576-03: Regulations of design and safe operation of pressure vessels
PNAE G-01-011-97: General Safety Regulations for nuclear thermal power plants (SSB 88/97). Also known as NP-001-97.
PPB AS-95: Fire safety regulations for the operation of nuclear power plants
R 50-605-80-93: System of products development and launching it into manufacture. Terms and definitions
RD 153-34.0-35.617-2001: Rules for maintenance of relay protection devices, electroautomatics, remote control and signaling of power plants and substations 110-750 kV
RD 34.45-51.300-97: Electrical equipment testing scope and standards.
RD 34.49.501-95: Model Guidelines for Operation of Automatic Water-Based Fire Extinguishing Systems
RD 34.49.502-96: Guidelines for Operation Air-Mechanical Foam Fire Extinguishing Systems
SNiP 3.05.05-84: Processing equipment and process pipelines
SNiP 41-01-2003: Heating, Ventilation and Air Conditioning (HVAC)
The Document is Referenced By:
PPB-AS 2011: Technical documentation. Fire safety regulations for the operation of nuclear power plants
STO 1.1.1.04.001.0870-2012: Fire safety requirements for the decommissioning of nuclear power units
Customers Who Viewed This Item Also Viewed:
|
Liquid lubricating and plastic materials. Method of test for lubricating properties on four ball machine
Language: English |
Armour clothes. Classification and general technical requirements
Language: English |
Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V. Non-sheathed cables for fixed wiring
Language: English |
Food products. Methods for detection and quantity determination of coliformes
Language: English |
Natural gas. Methods of calculation of physical properties. Calculation of physical properties on base information on density of standards conditions and nitrogen and carbon dioxide contents
Language: English |
Hotels design
Language: English |
Railroad rails. General specifications
Language: English |
Potassium chloride
Language: English |
Controllers acting without
Language: English |
|
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.