RD EO 1.1.2.25.0937-2013

РД ЭО 1.1.2.25.0937-2013

Nondestructive control. Uniform requirements for the form and content of technological maps

Контроль неразрушающий. Единые требования к форме и содержанию технологических карт

Status: Effective - Introduced for the first time

The document is intended for use when conducting operational control of the metal in accordance with the Typical control programs of the base metal and welded joints of equipment and pipelines of nuclear power plants during operation.

Документ предназначен для применения при проведении эксплуатационного контроля металла в соответствии с Типовыми программами контроля основного металла и сварных соединений оборудования и трубопроводов АЭС при эксплуатации.

Choose Language: 
Format: Electronic (pdf/doc)
Page Count: 17

Approved: Rosenergoatom Concern OJSC, 8/26/2013

SKU: RUSS166659

Price: $234.74




The Product is Contained in the Following Classifiers:

Construction (Max) » Regulations » Regulatory documents of supervisory authorities » Normative documents of Gosatomnadzor of Russia »

Welding regulations » Welding work »

Welding regulations » Pipelines »

Welding regulations » welding equipment »

Welding regulations » Documentation »

Welding regulations » Non-destructive control »

Welding regulations » Defects »

Welding regulations » Welding work » Surfacing »

PromExpert » SECTION IV. INDUSTRIAL SAFETY » III Nuclear and radiation safety » 3 Atomic stations »

ISO classifier » 27 ENERGY AND HEATING TECHNOLOGY » 27.120 Nuclear power engineering » 27.120.01 Nuclear power engineering in general »


The Document References:

GOST 10597-87: Painting brishes. Specifications

GOST 17433-80: Industrial purity. Compressed air. Grades of contamination

GOST 19281-89: Rolled steel with increased strength. General specifications

GOST 19903-74: Hot-rolled steel sheets. Dimensions

GOST 2.301-68: Unified system for design documentation. Formats

GOST 2246-70: Welding steel wire. Specifications

GOST 2603-79: Reagents. Acetone. Specifications

GOST 2761-84: Sources of centralized utility and drinking water supply Sanitary and technical requirements and selection rules

GOST R 51760-2011: Polymeric consumer's containers. General specifications

OST 95 10440-2002: Equipment for radioactive environments. Welded joints. Types and dimensions and structural elements.

PNAE G-7-008-89: Regulations for design and safe operation of equipment and piping of atomic power plants

PNAE G-7-009-89: Equipment and pipelines of nuclear power installations. Welding and overlaying, general provisions

PNAE G-7-010-89: Equipment and pipelines of nuclear energy facilities. Welded joints and beads. Testing rules

PNAE G-7-014-89: Standardized methods of testing of basic materials (semifinished products, weld joints and surfacing of equipment and piping of npp. Ultrasonic inspection. Part I. Control of basic materials (semifinished products)

PNAE G-7-015-89: Uniform methods of inspection of main materials (semi-finished products), welded joints and building-up of the equipment and piping of nuclear power units. Magnetic particle inspection

PNAE G-7-016-89: Standardized methods of control of basic materials (semifinished products), welded joints and cladding of equipment and of pipelines of NPP. Visual and a measuring control

PNAE G-7-017-89: Unified technique of inspection of base materials (semifinished products), welded joints and deposits of equipment and pipelines of atomic power plants. Ultrasonic inspection

PNAE G-7-018-89: Safety guidelines. Standardized methods of control of basic materials (semi-finished products), welded joints and surfacing of NPP equipment and piping. Dye penetrant inspection

PNAE G-7-019-89: Uniform methods of inspection of main materials (semi-finished products), welded joints and building-up of the equipment and piping of nuclear power units. Leak tightness control. Gas and liquid methods

PNAE G-7-025-90: Steel castings for nuclear plants. Rules of control

PNAE G-7-030-91: Uniform control methods for basic materials (semi-finished materials), welded joints and welding on of equipment and pipelines of nuclear power plants. Ultrasonic testing. Part II. Weld examination

PNAE G-7-031-91: Uniform control methods for basic materials (semi-finished materials), welded joints and weldings on of equipment and pipelines of nuclear power plants. Ultrasonic testing. Part III. Thickness measurement of monometals, metals and corrosion resistant coat

GOST R IEC 60598-2-4-99: Luminaires. Part 2. Particular requirements. Section 4. Portable general-purpose luminaires

Customers Who Viewed This Item Also Viewed:

Electromagnetic compatibility of technical equipment. Immunity of equipment for general lighting purposes to electromagnetic disturbance. Requirements and test methods
Language: English
Price: $218.25
Еlectromagnetic compatibility of technical equipment. Harmonic current emissions (equipment input current <= 16 A per phase). Limits and test methods
Language: English
Price: $410.31
Limits and methods of measurement of radio disturbance characteristics of electrical lighting and similar equipment
Language: English
Price: $714.89
Pipeline valves. General safety requirements
Language: English
Price: $213.84
Еlectromagnetic compatibility of technical equipment. Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems. Equipment with rated current <= 16 A and not subject to conditional connection. Limits and test methods
Language: English
Price: $359.87
Obosnovanie bezopasnosti oborudovaniya. Rekomendatsii po podgotovke
Language: English
Price: $67.32
Steel welded vessels and apparatus. General technical conditions
Language: English
Price: $108.90
Conformity assessment system for the use of nuclear energy. Personnel in the non-destructive and destructive testing of metal. Requirements and qualification procedure Дата введения в действие 15.03.2018
Language: English
Price: $207.90
State system for ensuring the uniformity of measurements. Verification of testing equipment. General principles
Language: English
Price: $121.77
Unified system of corrosion and ageing protection. Paint coatings. Groups of operation conditions
Language: English
Price: $158.40
Atom stations. Equipment, instruments, means of monitoring and control systems. General technical requirements
Language: English
Price: $1,146.54
System of design documents for construction. Basic requirements for design and working documentation
Language: English
Price: $867.18
Reinforcing rolled products for reinforced concrete constructions. Specifications
Language: English
Price: $298.98
Passenger cars on locomotive traction. Requirements for structural strength and dynamic qualities
Language: English
Price: $595.58
Non-destructive Testing. Welded Joints. Ultrasonic Methods
Language: English
Price: $140.58
Flanges for valves, fittings and pipelines for pressure to PN 250. Design, dimensions and general technical requirements
Language: English
Price: $293.04
Stainless steels and corrosion resisting, heat-resisting and creep resisting alloys. Grades
Language: English
Price: $212.85
Pipeline valves. Leakage rates of valves
Language: English
Price: $173.25
Compilation and execution of safety data sheet of chemical products
Language: English
Price: $175.23
Supports for Cylindrical and Conical Upright Apparatus. Types and Basic Parameters
Language: English
Price: $573.20

YOUR ORDERING MADE EASY!

RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.

Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.

We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.

Placing Your Order

Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).

Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.

For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.

For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.

Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.

Your Order Best Quality and Authenticity Guarantee

Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).

We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.

We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.

All Codes and Regulations

All Categories

Send us a message Expand Collapse

Leave your message in the form below, and we will write back by e-mail!