imgalt

RDM 929-02-93

РДМ 929-02-93

Certificate for the method of measuring the mass fraction of sulfur in the cast iron of unalloyed, carbon, alloyed and high-alloyed steel in the control of raw materials

Аттестат на методику выполнения измерений массовой доли серы в чугуне нелегированном, углеродистой, легированной и высоколегированной стали при контроле исходных материалов

Status: Effective

The instruction establishes the procedure for coordinated development, approval and introduction of technical specifications and prices for engineering products of industrial and technical purposes (except for defense), regardless of the authority approving prices and technical specifications for these products.

Аттестат распространяется на нелегированные чугуны, углеродистые, легированные и высоколегированные стали и устанавливает объемный метод определения серы в диапазоне от 0,002% до 0,25%. Методика предназначена для контроля исходных материалов и контроля технологических процессов.

Choose Language: 
Format: Electronic (pdf/doc)
SKU: RUSS166743


Price: imgalt
imgalt

The Product is Contained in the Following Classifiers:

Construction (Max) » Regulations » Sectoral and departmental regulatory and methodological documents » Design and construction of chemical facilities »

PromExpert » SECTION I. TECHNICAL REGULATION » V Testing and control » 4 Testing and control of products » 4.12 Testing and control of products of metallurgical industry » 4.12.1 Ferrous metals »

ISO classifier » 77 METALLURGY » 77.040 Metal Testing » 77.040.99 Other Metals Testing Methods »


The Document References:

GOST 1.4-85: State system of standardization. Procedure of development and approval of in-plant standards

GOST 10163-76: Reagents. Soluble starch. Specifications

GOST 16098-80: Welded joints of clad corrosion resistant steel. Main types, design elements and dimensions

GOST 1770-74: Laboratory volumetric glassware. Cylinders, beakers, measuring flasks, test tubes. General specifications

GOST 22536.0-87: Carbon steel and unalloyed cast iron. General requirements for methods of analysis

GOST 26182-84: Non-destructive testing. Fluorescent method of leak testing

GOST 26421-90: Ellipsoidal flanged bottoms made of aluminium. Dimensions

GOST 28473-90: Iron, steel, ferroalloys, metal chromium and metal manganese. General requirements for methods of analysis

GOST 4159-79: Reagents. Iodine. Specifications

GOST 4204-77: Reagents. Sulphuric acid. Specifications

GOST 4232-74: Reagents. Potassium iodide. Specifications

GOST 546-88: Copper cathodes. Specifications

GOST 5583-78: Industrial and medical gaseous oxygen

GOST 6709-72: Distilled water. Specifications

GOST 7565-81: Iron, steel and alloys. Sampling for determination of chemical composition

GOST 9147-80: Laboratory porcelain ware and apparatus. Specifications

OST 26.260.454-99: Spiral wound gasket. Types and dimensions. General specifications.

OST 26-02-1015-85: Tube fastening to tube sheets.

OST 26-11-10-93: Welded joints. X-Ray TV testing method.

RD 24.200.04-90: Weld seams. Metallographic method of control of the base metal and welded joints of chemical oil equipment

RD 24.200.11-90: Pressure-operated vessels and devices. Safety rules and standards during hydro-proof and leak-proof testing operations.

RD 24.200.13-90: Seamless steel pipes. Methodic of uniformity incoming ultrasonic control.

RD 24.942.02-90: Electroslag welding of chemical and petroequipment from low-alloyed and heat-resistant steels

RD 26-11-08-86: Welded Joints. Mechanical Tests

RD 26-17-086-88: Weld joints. Quality control of heat treatment equipment

RD 26-3-86: Procedural Guidelines for Extending the Service Life of Tanks for Liquid Carbon Dioxide

RD 26-8-87: Welding of cold-resistant low-alloyed steels used in structures operated at low temperatures

RDM 929-01-93: Certificate for measuring the mass fraction of carbon by the gas-exchange method in cast iron of unalloyed, carbon, alloyed and high-alloyed steel when controlling starting materials

RDM 929-03-93: Certificate for the method of measuring the mass fraction of phosphorus in unalloyed iron, carbon, alloyed and high alloyed steel in the control of raw materials

RDM 929-04-93: Certificate of measurement of the mass fraction of manganese in carbon steels and unalloyed iron in the control of raw materials

RDM 929-05-93: Certificate for the method of measuring the mass fraction of manganese in alloyed steels under the control of raw materials

RDM 929-06-93: Certificate for the method of measuring the mass fraction of manganese in alloyed steels under the control of raw materials

RDM 929-07-93: Certificate for the method of measuring the mass fraction of manganese by the titrimetric method with a cobalt-copper catalyst in carbon steel in the control of raw materials and finished products

RDM 929-08-93: The certificate on the method of measurement of the chromium mass fraction by the titrimetric method in alloyed and high-alloyed steel not containing vanadium

RDM 929-09-93: The certificate on a technique of performance of measurements of a mass fraction of chrome a titrimetric method in the alloyed and high-alloyed steel

RDM 929-10-93: Certificate for the method of measuring the mass fraction of chromium in carbon steel in the control of raw materials and finished products

RDM 929-11-93: Certificate for the method of measuring the mass fraction of silicon in unalloyed iron and carbon steel in the control of raw materials

RDM 929-12-93: Certificate for the method of measuring the mass fraction of silicon in alloyed, high-alloy steel in the control of raw materials

RDM 929-13-93: Certificate for the method of measuring the mass fraction of nickel in carbon, alloyed and high-alloyed steel in the control of raw materials and finished products

RDM 929-14-93: Certificate for the method of measuring the mass fraction of titanium in alloyed, high-alloyed steel when controlling starting materials

RDM 929-15-93: Certificate for the method of measuring the mass fraction of copper in carbon, alloyed and high-alloyed steel in the control of raw materials and finished products

RDM 929-16-93: Certificate for the method of measuring the mass fraction of zirconium in steel, alloyed and high-alloyed in the control of raw materials and finished products

RDM 929-17-93: The certificate on the method of measuring the mass fraction of molybdenum in alloyed and high-alloyed steel in the control of raw materials and finished products

RDM 929-18-93: Certificate for the measurement of the mass fraction of vanadium in carbon, alloyed and high-alloyed steel in the control of raw materials and finished products

RDM 929-19-93: The certificate on the method of measuring the mass fraction of aluminum in carbon, alloyed and high-alloyed steel in the control of raw materials and finished products

RDM 929-20-93: Certificate for the method of measuring the mass fraction of tungsten in alloyed and high-alloyed steel in the control of raw materials and finished products

RDM 929-21-93: The certificate on the method of measuring the mass fraction of niobium in alloyed and high alloyed steels under the control of raw materials and finished products

RDM 929-22-93: Certificate for the method of measuring the mass fraction of cerium in carbon steel in the control of raw materials and finished products

RDM 929-23-93: The certificate on the method of measuring the mass fraction of carbon by coulometric method in carbon alloyed and high-alloy steel

RTM 26-303-78: Isothermic Tanks for Liquefied Hydrocarbon Gas. Standards and Calculation Methods

RTM 26-44-82: Heat treatment of petrochemical equipment and its parts

The Document is Referenced By:

RDM 929-01-93: Certificate for measuring the mass fraction of carbon by the gas-exchange method in cast iron of unalloyed, carbon, alloyed and high-alloyed steel when controlling starting materials

RDM 929-03-93: Certificate for the method of measuring the mass fraction of phosphorus in unalloyed iron, carbon, alloyed and high alloyed steel in the control of raw materials

RDM 929-04-93: Certificate of measurement of the mass fraction of manganese in carbon steels and unalloyed iron in the control of raw materials

RDM 929-05-93: Certificate for the method of measuring the mass fraction of manganese in alloyed steels under the control of raw materials

RDM 929-06-93: Certificate for the method of measuring the mass fraction of manganese in alloyed steels under the control of raw materials

RDM 929-07-93: Certificate for the method of measuring the mass fraction of manganese by the titrimetric method with a cobalt-copper catalyst in carbon steel in the control of raw materials and finished products

RDM 929-08-93: The certificate on the method of measurement of the chromium mass fraction by the titrimetric method in alloyed and high-alloyed steel not containing vanadium

RDM 929-09-93: The certificate on a technique of performance of measurements of a mass fraction of chrome a titrimetric method in the alloyed and high-alloyed steel

RDM 929-10-93: Certificate for the method of measuring the mass fraction of chromium in carbon steel in the control of raw materials and finished products

RDM 929-11-93: Certificate for the method of measuring the mass fraction of silicon in unalloyed iron and carbon steel in the control of raw materials

RDM 929-12-93: Certificate for the method of measuring the mass fraction of silicon in alloyed, high-alloy steel in the control of raw materials

RDM 929-13-93: Certificate for the method of measuring the mass fraction of nickel in carbon, alloyed and high-alloyed steel in the control of raw materials and finished products

RDM 929-14-93: Certificate for the method of measuring the mass fraction of titanium in alloyed, high-alloyed steel when controlling starting materials

RDM 929-15-93: Certificate for the method of measuring the mass fraction of copper in carbon, alloyed and high-alloyed steel in the control of raw materials and finished products

RDM 929-16-93: Certificate for the method of measuring the mass fraction of zirconium in steel, alloyed and high-alloyed in the control of raw materials and finished products

RDM 929-17-93: The certificate on the method of measuring the mass fraction of molybdenum in alloyed and high-alloyed steel in the control of raw materials and finished products

RDM 929-18-93: Certificate for the measurement of the mass fraction of vanadium in carbon, alloyed and high-alloyed steel in the control of raw materials and finished products

RDM 929-19-93: The certificate on the method of measuring the mass fraction of aluminum in carbon, alloyed and high-alloyed steel in the control of raw materials and finished products

RDM 929-20-93: Certificate for the method of measuring the mass fraction of tungsten in alloyed and high-alloyed steel in the control of raw materials and finished products

RDM 929-21-93: The certificate on the method of measuring the mass fraction of niobium in alloyed and high alloyed steels under the control of raw materials and finished products

RDM 929-22-93: Certificate for the method of measuring the mass fraction of cerium in carbon steel in the control of raw materials and finished products

RDM 929-23-93: The certificate on the method of measuring the mass fraction of carbon by coulometric method in carbon alloyed and high-alloy steel

Customers Who Viewed This Item Also Viewed:

imgalt imgalt
Limit dimension deviation from 0,1 to 10000 mm and surface shape and arrangement allowances, not specified on drawings.
Language: English
Price: $1,060.25
imgalt
Rules of development, coordination, approval and composition of technical and economic assessment for construction
Language: English
Price: $198.62
imgalt
Mineral fertilizers. Method for determination of dynamic strength and attrition
Language: English
Price: $41.00
imgalt
Diesel fuel EURO. Specifications
Language: English
Price: $233.00
imgalt
Inch thread with a profile angle of 55 degrees
Language: English
Price: $121.00
imgalt
Vessels and apparatus. Norms and methods of strength calculation. General requirements
Language: English
Price: $178.00
imgalt
Norms of structural design of nuclear power plants with reactors of different types
Language: English
Price: $12.00
imgalt

YOUR ORDERING MADE EASY!

RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.

Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.

We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.

Placing Your Order

Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).

Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.

For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.

For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.

Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.

Your Order Best Quality and Authenticity Guarantee

Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).

We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.

We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.

All Codes and Regulations

All Categories

Send us a message Expand Collapse

Leave your message in the form below, and we will write back by e-mail!