Automation systems. Recommendations for the design of steel structures for wiring and installation of automation equipment
Системы автоматизации. Рекомендации по проектированию стальных конструкций для прокладки проводок и монтаж средств автоматизации
Status: Not effective - Superseded
This guidance material (RM) contains recommendations on the selection of typical steel structures for automation systems (CA) and the development of custom-made structures, as well as methods of calculation, taking into account the possibilities of their use under various climatic influences. RM are intended for use in the design, installation and operation of automation systems of technological processes and engineering equipment of buildings and structures in accordance with the scope of SNiP 3.05.07, RTM 36.22.7.
Настоящий руководящий материал (РМ) содержит рекомендации по выбору типовых стальных конструкций для систем автоматизации (СА) и разработке конструкций индивидуального изготовления, а также методики расчета с учетом возможностей их применения при различных климатических воздействиях. РМ предназначены для применения при проектировании, монтаже и эксплуатации систем автоматизации технологических процессов и инженерного оборудования зданий, и сооружений в соответствии с областью распространения СНиП 3.05.07, РТМ 36.22.7.
Choose Language:
Format: Electronic (pdf/doc)
SKU: RUSS166889
The Product is Contained in the Following Classifiers:
Construction (Max) »
Regulations »
Sectoral and departmental regulatory and methodological documents »
Installation and special construction works »
ISO classifier »
25 MECHANICAL ENGINEERING »
25.040 Industrial automated systems »
25.040.01 Industrial automation systems in general »
ISO classifier »
29 ELECTRICAL ENGINEERING »
29.060 Electrical Wires and Cables »
29.060.01 Electrical wires and cables in general »
ISO classifier »
91 CONSTRUCTION MATERIALS AND CONSTRUCTION »
91.140 Installations in buildings »
91.140.50 Power supply systems »
The Document References:
GOST 10144-89: Enamels XB-124Specifications
GOST 1050-88: Carbon structural quality steel gauged bars with special surface finish. General specifications
GOST 1114-84: Tractor mounted hoes. Types and basic parameters
GOST 11371-78: Washers. Specifications
GOST 1508-78: Control rubber and plastic-insulated cables. Specifications
GOST 15150-69: Machines, instruments and other industrial products. Modifications for different climatic regions. Categories, operating, storage and transportation conditions as to environment climatic aspects influence
GOST 15521-70: Hexagon nuts with reduced width across flats, product grade B. Construction and dimensions
GOST 15589-70: Bolts with hexagon head, product grade C construction and dimensions
GOST 15590-70: Hexagon reduced head bolts with guide neck product grade C. Construction and dimensions.
GOST 15591-70: Hexagon reduced head bolts, product grade C. Construction and dimensions
GOST 16350-80: Climate of the USSR. Regionalizing and statistical parameters of climatic factors for technical purposes
GOST 1759.1-82: Bolts, screws, studs and nuts. Tolerance, monitoring methods of dimensions and deviations of shape and surface orientation
GOST 18374-79: Enamels XB-110 and XB-113. Specifications
GOST 18404.3-73: Polyethylene insulated pvc sheathed control cables
GOST 19281-89: Rolled steel with increased strength. General specifications
GOST 21227-93: Enamels ПФ-218. Specifications
GOST 22498-88: Local telephone cables with polyethylene insulation and plastic sheath.
GOST 26998-86: Polyamide dowels for buildings. Specifications
GOST 27320-87: Expansive bolts. Construction
GOST 3063-80: One lay rope type ТК construction 1x19 (1+6+12). Dimensions
GOST 3064-80: One lay rope type ТК construction 1x37 (1+6+12+18). Dimensions
GOST 380-2005: Common quality carbon steel. Grades
GOST 433-73: Rubber-insulated power cables. Specifications
GOST 5915-70: Hexagon nuts, product grade B. Construction and dimensions
GOST 6323-79: Polyvinyl chloride insulated cables
GOST 6402-70: Lock washers. Specifications
GOST 7313-75: Enamels ХВ-785 and lacquer XB-784. Specifications
GOST 7795-70: Hexagon reduced bead bolts with guide neck product grade B. Construction and dimensions.
GOST 7796-70: Hexagon reduced head bolts product grade B. Construction and dimensions
GOST 7798-70: Hexagon bolts, product grade B. construction and dimensions
GOST 9467-75: Metal covered electrodes for manual arc welding of structural and heat-resistant steels. Types
GOST 9754-76: Enamels MЛ-12 type. Specifications
RM 4-132-89: Automation systems. Nomograms and tables for the selection of protective pipes, supporting structures for the design of electrical and pipe wiring
RM 4-239-91: Automation systems. Dictionary-reference terms. Allowance to SNiP 3.05.07-85
SNiP 3.04.03-85: Protection of construction structures and facilities from corrosion
SNiP 3.05.07-85: Automated systems
STK 4-25-91: Units and details of the supporting and supporting structures of electrical and pipe wiring. Part 1
STK 4-9-91: Standardized metal structures for installation of automation and communication equipment on the elements of industrial buildings and structures. Part 1. Metal structures for vertical installation of devices
STK 4-9-96: Standardized metal structures for installation of automation and communication equipment on the elements of industrial buildings and structures. Part 2
STM 4-25-91: Methods of installation of supporting and supporting structures of electrical and pipe wiring. Part 1. Bridges, trays
STM 4-26-91: Protective pipelines for automation and industrial communications. Part 1. Steel pipelines
STM 4-5-92: Instruments for measuring and regulating temperature. Installation on the wall and floor. Part 2
STM 4-7-96: Measuring instruments and transducers of pressure and differential pressure. Single installation on the floor or wall. Part 2. Pressure differential devices
STM 4-8-90: Mechanisms executive electric. Floor and wall installation
STM 4-8-92: Mechanisms executive electric. Part 2. Joints with control valves and dampers
STM 4-9-91: Fastening of metal structures for mounting devices to the elements of industrial buildings and structures. Part 1. Fastening of metal structures for devices for measuring and regulating temperature, pressure and flow to the wall and floor
The Document is Referenced By:
IM 14-51-94, v.2: Guidelines and explanations on topical issues of development of automation systems. Release 2. General questions of application of standard drawings
IM 4-12-95: Automation systems. Handbook of materials. Part 1. Basic materials
IM 51216464-009-01: Instructions for use of supporting cable structures of the series "P" on TU 3449-009-51216464-01
|
Customers Who Viewed This Item Also Viewed:
 |
Preservative oil K-17
Language: English |
Jet fuels
Language: English |
Chill moulds. Ventilation channels. Dimensions
Language: English |
Additive АКОР-1. Specifications
Language: English |
Vibration. Evaluation of machine vibration by measurements on non-rotating parts. Part 3. Industrial machines with nominal power above 15 kW and nominal speeds between 120 r/min and 15000 r/min
Language: English |
Ceramic brick and stone. General specifications
Language: English |
Microbiology of food and animal feeding stuffs. Methods for detection and enumeration of sulphite-reducing bacteria growing under anaerobic conditions
Language: English |
Maximum admissible amounts of chemical substances, emitting from the packaging materials into food products
Language: English |
System of design documents for construction. Rules for execution of the working documentation of architectural and construction solutions
Language: English |
 |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.
